Found 217 Documents (Results 1–100)
An analysis of failure in shear versus tension. (English) Zbl 07849922
MSC:
74-XX
Dominant causal factors of failure performance of cross-jointed segmental lining. (English) Zbl 1531.74068
A small-deformation rate-independent continuous-flow model for elasto-plastic frames allowing rapid fatigue predictions in metallic structures. (English) Zbl 1537.74320
MSC:
74R99
Hollow cylinder with thermally induced gradient of the yield strength: the gain in loading capacity under pressure. (English) Zbl 07776183
Dynamic analysis of structures installed hysteretic dampers with hardening post-yielding stiffness using connection element method. (English) Zbl 1518.90094
J. Comb. Optim. 45, No. 3, Paper No. 95, 34 p. (2023); retraction note ibid. 47, No. 3, Paper No. 23, 1 p. (2024).
Metallic yielding dampers and fluid viscous dampers for vibration control in civil engineering: a review. (English) Zbl 1537.74104
MSC:
74H45
Rayleigh-type wave propagation in exponentially graded initially stressed composite structure resting on rigid and yielding foundations. (English) Zbl 1510.86015
From breakup to coiling and buckling regimes in buoyant viscoplastic injections. (English) Zbl 1512.76002
Stress analysis in an isotropic hyperbolic rotating disk fitted with rigid shaft. (English) Zbl 1479.74019
Embedded unit cell homogenization model for localized non-periodic elasto-plastic zones. (English) Zbl 1494.74062
Reviewer: Vladimir Mityushev (Kraków)
Anisotropic yield criterion for metals exhibiting tension-compression asymmetry. (English) Zbl 1488.74034
Elastoplastic analysis in functionally graded thick-walled rotating transversely isotropic cylinder under a radial temperature gradient and uniform pressure. (English) Zbl 1486.74013
MSC:
74C05
Yield criterion and finite strain behavior of random porous isotropic materials. (English) Zbl 1476.74030
Dynamic deformation of a thin plastic layer between converging rigid cylinders. (English. Russian original) Zbl 1487.74016
Mosc. Univ. Mech. Bull. 75, No. 4, 87-95 (2020); translation from Vestn. Mosk. Univ., Ser. I 75, No. 4, 29-37 (2020).
Optimal periodic control for scalar dynamics under integral constraint on the input. (English) Zbl 1455.49001
Increase in the level of structural safety of multistory buildings and structures. (English) Zbl 1461.74051
Popkova, Elena G. (ed.), Growth poles of the global economy: emergence, changes and future perspectives. Selected papers of the international scientific conference, Russia. In 2 volumes. Cham: Springer. Lect. Notes Netw. Syst. 73, 15-23 (2020).
Analysis of elastic-plastic fracture in two-dimensional decagonal quasicrystals using the displacement discontinuity method. (English) Zbl 1464.82026
Instantaneously not elongated directors in three-dimensional kinematics of the Coulomb-Mohr medium. (Russian. English summary) Zbl 1462.74037
Elastic-plastic infinitesimal deformation in a solid disk under heat effect by using seth theory. (English) Zbl 1397.74029
Influence of yielding base and rigid base on propagation of Rayleigh-type wave in a viscoelastic layer of Voigt type. (English) Zbl 1390.74104
Advances and challenges in inferences for elliptically contoured \(t\) distributions. (English) Zbl 1407.62237
Sutradhar, Brajendra C. (ed.), Advances and challenges in parametric and semi-parametric analysis for correlated data. Proceedings of the 2015 international symposium in statistics, ISS 2015, St. John’s, Canada, July 6–8, 2015. Cham: Springer. Lect. Notes Stat. 218, 3-39 (2016).
A parametric study on the elastic-plastic deformation of a centrally heated two-layered composite cylinder with free ends. (English) Zbl 1457.74050
Shear banding of complex fluids. (English) Zbl 1356.76014
Davis, Stephen H. (ed.) et al., Annual review of fluid mechanics. Vol. 48. Palo Alto, CA: Annual Reviews (ISBN 978-0-8243-0748-6/hbk). Annual Review of Fluid Mechanics 48, 81-103 (2016).
Pre-fracture zones modelling for a limited permeable crack in an interlayer between magneto-electro-elastic materials. (English) Zbl 1443.74118
Analysis of surface effects on the deformation of a nanovoid in an elasto-plastic material. (English) Zbl 1443.74079
Geometric and material nonlinear analysis of square-based tensegrity ring structures. (English) Zbl 1390.74036
Sound insulation properties of one-dimensional three-layered plate. (Russian, English) Zbl 1313.76098
Mat. Metody Fiz.-Mekh. Polya 56, No. 2, 86-93 (2013); translation in J. Math. Sci., New York 203, No. 1, 104-113 (2014).
Reviewer: A. Ja. Olejnik (Kyïv)
Local stress distribution and yielding of steel sheets due to concentrated transverse loads. (English) Zbl 1293.74285
Simulation of local instabilities during crack propagation in the ductile-brittle transition region. (English) Zbl 1278.74153
Effects of the strain-hardening exponent on two-parameter characterizations of surface-cracks under large-scale yielding. (English) Zbl 1426.74270
A global model reduction approach for 3D fatigue crack growth with confined plasticity. (English) Zbl 1225.74086
Limited permeable crack in an interlayer between piezoelectric materials with different zones of electrical saturation and mechanical yielding. (English) Zbl 1194.74305
Yielding and strain hardening in metallic thin films on substrates: an edge dislocation climb model. (English) Zbl 1257.74101
Inelastic axial-flexure-shear coupling in a mixed formulation beam finite element. (English) Zbl 1203.74088
On the importance of thermo-elastic cooling in the fracture of glassy polymers at high rates. (English) Zbl 1169.74562
A simple and efficient approach to capturing bonding effect in naturally microstructured sands by discrete element method. (English) Zbl 1194.74192
MSC:
74L10
74S30
Pressure-sensitive ductile layers. I: Modeling the growth of extensive damage. (English) Zbl 1178.74138
An optimization approach to modeling sea ice dynamics. II: Finite ice strength effects. (English) Zbl 1191.76083
A three-dimensional numerical study of mode I crack tip fields in pressure-sensitive plastic solids. (English) Zbl 1108.74056
Bending modified \(J-Q\) theory and crack-tip constraint quantification. (English) Zbl 1197.74165
MSC:
74R20
Representation of crack-tip plasticity in pressure sensitive geomaterials: large scale yielding. (English) Zbl 1197.74160
Discrete-line plastic zones in the neighbourhood of angle cut-out in the medium with yielding delay at anti-plane deformation. (Russian. English summary) Zbl 1164.74367
Reviewer: I. T. Selezov (Kyïv)
MSC:
74C05
Effects of pressure-sensitivity and plastic dilatancy on void growth and interaction. (English) Zbl 1120.74772
MSC:
74R20
Dynamic strain aging and related instabilities: experimental, theoretical and numerical aspects. (English) Zbl 1093.74004
Plastic stresses at the tip of a crack impinging perpendicularly the interface of two different elastic-plastic materials. (English) Zbl 1195.74154
A microbeam bending method for studying stress-strain relations for metal thin films on silicon substrates. (English) Zbl 1122.74452
Elastic-plastic transition in a transversely isotropic disc with variable thickness under internal pressure. (English) Zbl 1087.74038
A weakened form of Ilyushin’s postulate and the structure of self-consistent Eulerian finite elastoplasticity. (English) Zbl 1114.74364
MSC:
74C15
Characterization of crack-tip field and constraint for bending specimens under large-scale yielding. (English) Zbl 1187.74165
A small-scale magnetic-yielding model for an infinite magnetostrictive plane with a crack-like flaw. (English) Zbl 1181.74041
Effects of lattice incompatibility-induced hardening on the fracture behavior of ductile single crystals. (English) Zbl 1115.74305
Modeling of elastomeric materials using nonlinear fractional derivative and continuously yielding friction elements. (English) Zbl 1079.74521
MSC:
74D10
Fields and fracture of the interface between a glassy polymer and a rigid substrate. (English) Zbl 1060.74062
A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals. (English) Zbl 1107.74006
Reviewer: Sanda Cleja-Ţigoiu (Bucureşti)
The effect of doubly tapered strut morphology on the plastic yield surface of cellular materials. (English) Zbl 1032.74651
Plane strain mixed mode crack-tip stress fields characterized by a triaxial stress parameter and a plastic deformation extent based characteristic length. (English) Zbl 1073.74046
Reviewer: I. A. Parinov (Rostov-na-Donu)
Plastic collapse of cellular structures comprised of doubly tapered struts. (English) Zbl 1016.74062
Effective properties of the octet-truss lattice material. (English) Zbl 1011.74056
Reviewer: Wilfried Becker (Siegen)
The choice of objective rates in finite elastoplasticity: General results on the uniqueness of the logarithmic rate. (English) Zbl 1046.74010
Reviewer: Anatoliy S. Semenov (Odessa)
Modeling of the competition between shear yielding and crazing in glassy polymers. (English) Zbl 1012.74064
A phenomenological framework of constitutive modelling for incompressible and compressible elasto-plastic solids. (English) Zbl 0978.74012
Generalized formulation for strip yielding model with variable cohesion and its analytical solutions. (English) Zbl 0991.74063
On the volumetric deformation of reconstituted soils. (English) Zbl 0980.74042
Reviewer: Olivian Simionescu (Bucureşti)
MSC:
74L10
A concise finite element model for three-layered straight wire rope strand. (English) Zbl 0967.74064
Elastic-plastic behavior of elastically homogeneous materials with a random field of inclusions. (English) Zbl 0971.74006
Mode I crack tip fields with incomplete crack tip plasticity in plane stress. (English) Zbl 0965.74058
Vacuum moulding of a superplastic in two dimensions. (English) Zbl 0982.74015
Reviewer: Udo Gamer (Wien)
MSC:
74C15
74S30
Stable crack growth along a brittle/ductile interface. II: Small scale yielding solutions and interfacial toughness predictions. (English) Zbl 0941.74045
On representations of yield functions for crystals, quasicrystals and transversely isotropic solids. (English) Zbl 0930.74012
On a viscoplastic Shanley-like model under constant load. (English) Zbl 0977.74007
Reviewer: N.Cristescu (Gainesville)
Dissipative flow model based on dissipative surface and irreversible thermodynamics. (English) Zbl 0936.74005
Elastic-plastic transition in a thin rotating disc of variable thickness with edge loading. (English) Zbl 0969.74534
Uniaxial strength asymmetry in cellular materials: An analytical model. (English) Zbl 0971.74019
MSC:
74E05
A boundary element scheme for plate postbuckling analysis. (English) Zbl 0933.74075
Brebbia, C. A. (ed.), Boundary element research in Europe. EUROBEM 98. Proceedings of the 2nd European boundary element symposium held in Southampton, GB, May 19-21, 1998. Southampton: C M Publications. 305-316 (1998).
Filter Results by …
Document Type
- Journal Articles (187)
- Collection Articles (16)
- Books (14)
all
top 5
Author
- Owen, David Roger Jones (6)
- Kondo, Kazuo (5)
- Smith, Edwin (5)
- Gupta, Surender K. (4)
- Bruhns, Otto Timme (3)
- Little, G. H. (3)
- Lu, Tian Jian (3)
- Meyers, Albert Thomas Marie (3)
- Xiao, Heng (3)
- Ziegler, Franz (3)
- Al-Hassani, S. T. S. (2)
- Arora, Jasbir S. (2)
- Atkinson, Colin (2)
- Barlat, Frédéric (2)
- Bassani, John L. (2)
- Cazacu, Oana (2)
- Chattopadhyay, Amares (2)
- Chen, C. (2)
- Chew, Huck Beng (2)
- Damjanić, Frano B. (2)
- Druyanov, Boris Abramovich (2)
- Estevez, Rafael (2)
- Figueiras, Joaquim A. (2)
- Fleck, Norman A. (2)
- Freund, Lambert B. (2)
- Gibson, Lorna J. (2)
- Hayek, H. (2)
- Hui, Chung-Yuen (2)
- Hutchinson, John Woodside (2)
- Irschik, Hans (2)
- Jiang, Wenguang (2)
- Le Khanh Chau (2)
- Linnik, Yuriĭ Vladimirovich (2)
- Morozov, Nikita Fedorovich (2)
- Nix, William D. (2)
- Petrov, Yuri V. (2)
- Polizzotto, Castrenze (2)
- Ponte Castañeda, Pedro (2)
- Ren, Jingli (2)
- Saha, Shalini (2)
- Saigal, Sunil (2)
- Sharma, Sanjeev Kumar (2)
- Singh, Abhishek Kumar (2)
- Sutradhar, Brajendra Chandra (2)
- Thakur, Pankaj (2)
- Tvergaard, Viggo (2)
- van der Giessen, Erik (2)
- Walton, James Michael (2)
- Zhu, Xiankui (2)
- Abe, Hiroyuki (1)
- Abeyaratne, Rohan C. (1)
- Acharya, Amit (1)
- Achenbach, Jan D. (1)
- Adley, M. D. (1)
- Aifantis, Elias C. (1)
- Akisanya, Alfred R. (1)
- Aleksandrov, Sergeĭ Evgen’evich (1)
- Ammon, D. (1)
- Andreaus, Ugo A. (1)
- Arakere, Nagaraj K. (1)
- Aravas, Nikolaos (1)
- Ashby, Michael F. (1)
- Ashmawi, W. M. (1)
- Asphaug, Erik Ian (1)
- Augusti, Giuliano (1)
- Baratta, Alessandro (1)
- Bastero, C. (1)
- Basu, Sumit (1)
- Bayen, Térence (1)
- Beck, James L. (1)
- Bellomo, Nicola (1)
- Benallal, Ahmed (1)
- Benedetti, Andrea (1)
- Benedetti, Carlo (1)
- Benz, Willy (1)
- Benzerga, Ahmed Amine (1)
- Bérard, Pierre H. (1)
- Berstad, Torodd (1)
- Bert, Charles W. (1)
- Betten, Josef (1)
- Bhardwaj, Ram Krishan (1)
- Biehl, F.-J. (1)
- Bigi, Dante (1)
- Billington, E. W. (1)
- Blackmore, Denis L. (1)
- Boehler, Jean-Paul (1)
- Borri, Claudio (1)
- Børvik, Tore (1)
- Brockman, Robert A. (1)
- Bubenik, T. (1)
- Cai, Yingchun (1)
- Capecchi, Danilo (1)
- Capsoni, Antonio (1)
- Carpinteri, Alberto (1)
- Carter, John P. (1)
- Casciati, Fabio (1)
- Cazzulo, R. (1)
- Chang, Ken-ta (1)
- Chao, Yuh J. (1)
- Chapman, Stephen Jonathan (1)
- and 264 more Authors
all
top 5
Serial
- Int. J. Solids Struct. (20)
- J. Mech. Phys. Solids (16)
- Int. J. Mech. Sci. (10)
- Int. J. Plast. (8)
- Int. J. Eng. Sci. (7)
- Eur. J. Mech., A, Solids (7)
- J. Appl. Mech. (6)
- Int. J. Numer. Methods Eng. (6)
- Comput. Mech. (6)
- Arch. Mech. (5)
- Comput. Methods Appl. Mech. Eng. (5)
- Comput. Struct. (5)
- Int. J. Fract. (5)
- Acta Mech. (4)
- Indian J. Pure Appl. Math. (4)
- Arch. Appl. Mech. (4)
- Rheol. Acta (3)
- Appl. Math. Mech., Engl. Ed. (3)
- Math. Mech. Solids (3)
- Int. J. Non-Linear Mech. (2)
- Int. J. Numer. Anal. Methods Geomech. (2)
- J. Fluid Mech. (2)
- Matrix Tensor Q. (2)
- Rozpr. Inż. (2)
- Appl. Math. Modelling (2)
- Proc. R. Soc. Lond., Ser. A (2)
- C. R. Acad. Sci., Paris, Sér. II (2)
- Nonlinear Dyn. (2)
- Mitt. Inst. Mech., Ruhr-Univ. Bochum (2)
- Int. J. Struct. Stab. Dyn. (2)
- Comput. Phys. Commun. (1)
- IMA J. Appl. Math. (1)
- Math. Methods Appl. Sci. (1)
- Mosc. Univ. Mech. Bull. (1)
- Z. Angew. Math. Phys. (1)
- Z. Angew. Math. Mech. (1)
- Appl. Math. Comput. (1)
- Bull. Calcutta Math. Soc. (1)
- Gaṇita (1)
- IEEE Trans. Comput. (1)
- Meccanica (1)
- Mech. Res. Commun. (1)
- Sov. Math., Dokl. (1)
- Acta Mech. Sin. (1)
- Nat. Sci. J. Xiangtan Univ. (1)
- J. Tsinghua Univ., Sci. Technol. (1)
- Eur. J. Mech., A (1)
- Bull. Acad. Pol. Sci., Sér. Sci. Tech. (1)
- J. Elasticity (1)
- Rev. Roum. Sci. Tech., Sér. Méc. Appl. (1)
- SIAM J. Appl. Math. (1)
- J. Méc. Théor. Appl. (1)
- Acta Mech. Sin., Engl. Ed. (1)
- Eng. Anal. Bound. Elem. (1)
- Mat. Metody Fiz.-Mekh. Polya (1)
- J. Comb. Optim. (1)
- Proc. R. Soc. Lond., Ser. A, Math. Phys. Eng. Sci. (1)
- Philos. Trans. R. Soc. Lond., Ser. A, Math. Phys. Eng. Sci. (1)
- Din. Sist., Simferopol’ (1)
- Commun. Nonlinear Sci. Numer. Simul. (1)
- Int. J. Appl. Mech. Eng. (1)
- Sādhanā (1)
- Eng. Appl. Fract. Mech. (1)
- North-Holland Math. Stud. (1)
- Adv. Appl. Math. Mech. (1)
- Sankhyā, Ser. A (1)
- Arab. J. Sci. Eng. (1)
- Math. Control Relat. Fields (1)
- Izv. Sarat. Univ. (N.S.), Ser. Mat. Mekh. Inform. (1)
- Int. J. Appl. Comput. Math. (1)
all
top 5
Year of Publication
- 2024 (3)
- 2023 (3)
- 2022 (5)
- 2021 (5)
- 2020 (3)
- 2019 (2)
- 2018 (3)
- 2017 (2)
- 2016 (3)
- 2015 (2)
- 2014 (2)
- 2013 (1)
- 2012 (2)
- 2011 (4)
- 2010 (1)
- 2009 (4)
- 2008 (1)
- 2007 (4)
- 2006 (9)
- 2005 (4)
- 2004 (9)
- 2003 (2)
- 2002 (1)
- 2001 (5)
- 2000 (7)
- 1999 (9)
- 1998 (7)
- 1997 (6)
- 1996 (2)
- 1995 (5)
- 1994 (8)
- 1993 (4)
- 1992 (6)
- 1991 (3)
- 1990 (7)
- 1989 (9)
- 1988 (9)
- 1987 (5)
- 1986 (8)
- 1985 (4)
- 1984 (3)
- 1983 (8)
- 1982 (8)
- 1981 (6)
- 1980 (4)
- 1979 (3)
- 1978 (4)
- 1968 (1)
- 1966 (1)