[1] |
Aonuma, S. , Onuma, K. , Watanabe, A. , Sasaki, M. , Oizumi, K. and Konno, K. (2004), ”Large eddy simulation of flow and heat transfer in a 90{\(\deg\)} ribbed duct with rotation: effect of Coriolis and centrifugal buoyancy forces”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 126 No. 4, pp. 627-636. |
[2] |
Acharya, S. , Dutta, S. , Myrum, T.A. and Baker, R.S. (1993), ”Periodically developed flow and heat transfer in a ribbed duct”,The International Journal of Heat and Fluid Flow, Vol. 36 No. 8, pp. 2069-2082. · doi:10.1016/S0017-9310(05)80138-3 |
[3] |
Chandra, P.R. , Han, J.C. and Lau, S.C. (1987), ”Effect of rib angle on local heat/mass transfer distribution in a two-pass rib-roughened channel”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 110 No. 2, pp. 233-241. |
[4] |
DOI: 10.2514/2.914 · doi:10.2514/2.914 |
[5] |
DOI: 10.1007/s11433-013-4990-z · doi:10.1007/s11433-013-4990-z |
[6] |
DOI: 10.1017/jfm.2012.150 · Zbl 1248.76093 · doi:10.1017/jfm.2012.150 |
[7] |
DOI: 10.1002/fld.512 · Zbl 1032.76574 · doi:10.1002/fld.512 |
[8] |
DOI: 10.1016/S0017-9310(96)00318-3 · doi:10.1016/S0017-9310(96)00318-3 |
[9] |
DOI: 10.1017/S0022112092001678 · Zbl 0775.76059 · doi:10.1017/S0022112092001678 |
[10] |
DOI: 10.1063/1.864049 · Zbl 0524.76069 · doi:10.1063/1.864049 |
[11] |
Germano, M. , Piomelli, U. , Moin, P. and Cabot, W.H. (1991), ”A dynamic subgrid-scale eddy viscosity model”,Physics of Fluids A, Vol. 3, No. 7, pp. 1760-1765. · Zbl 0825.76334 · doi:10.1063/1.857955 |
[12] |
DOI: 10.1007/s10494-011-9378-4 · Zbl 1247.76038 · doi:10.1007/s10494-011-9378-4 |
[13] |
Han, J.C. (1984), ”Heat transfer and friction in channels with two opposite rib-roughened walls”,American Society of Mechanical Engineers Journal of Heat Transfer, Vol. 106 No. 4, pp. 774-781. · doi:10.1115/1.3246751 |
[14] |
Han, J.C. , Chandra, P.R. and Lau, S.C. (1988), ”Local heat/mass transfer distributions around sharp 180 deg turns in two-pass smooth and ribroughened channels”,American Society of Mechanical Engineers Journal of Heat Transfer, Vol. 110 No. 1, pp. 91-98. |
[15] |
DOI: 10.1016/0017-9310(78)90113-8 · doi:10.1016/0017-9310(78)90113-8 |
[16] |
DOI: 10.4208/cicp.050513.270513a · Zbl 1373.76060 · doi:10.4208/cicp.050513.270513a |
[17] |
DOI: 10.1108/09615530810846374 · Zbl 1158.76019 · doi:10.1108/09615530810846374 |
[18] |
Iacovides, H. , Jackson, D.C. , Kelemenis, G. and Launder, B.E. (2000), ”The measurement of local wall heat transfer in stationary U-ducts of strong curvature, with smooth and rib roughened walls”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 122 No. 2, pp. 386-392. · doi:10.1115/1.555459 |
[19] |
DOI: 10.1016/S0894-1777(99)00016-3 · doi:10.1016/S0894-1777(99)00016-3 |
[20] |
DOI: 10.1016/S0142-727X(01)00093-5 · doi:10.1016/S0142-727X(01)00093-5 |
[21] |
Iacovides, H. , Jackson, D.C. , Ji, H. , Kelemenis, G. , Launder, B.E. and Nikas, K. (1998), ”LDA study of flow development through an orthogonally rotating U-bend of strong curvature and rib-roughened walls”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 120 No. 2, pp. 386-391. · doi:10.1115/1.2841417 |
[22] |
Jiang, Z. , Xiao, Z. , Shi, Y. and Chen, S. (2013), ”Constrained large eddy simulation of wall-bounded compressible turbulent flows”,Physics of Fluids, Vol. 25 No. 10, pp. 106102, 1-28. · doi:10.1063/1.4824393 |
[23] |
DOI: 10.1115/1.2929467 · doi:10.1115/1.2929467 |
[24] |
Korotky, G.J. and Taslim, M.E. (1998), ”Rib heat transfer coefficient measurements in a rib-roughened square passage”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 120 No. 2, pp. 376-385. · doi:10.1115/1.2841416 |
[25] |
Lau, S.C. , McMillan, R.D. and Han, J.C. (1991a), ”Turbulent heat transfer and friction in a square channel with discrete rib turbulators”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 113 No. 3, pp. 360-366. · doi:10.1115/1.2927884 |
[26] |
Lau, S.C. , McMillan, R.D. and Han, J.C. (1991b), ”Heat transfer characteristics of turbulent flow in a square channel with angled discrete ribs”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 113 No. 3, pp. 367-374. · doi:10.1115/1.2927885 |
[27] |
DOI: 10.1017/S0022112087002520 · Zbl 0634.76062 · doi:10.1017/S0022112087002520 |
[28] |
DOI: 10.1063/1.858280 · doi:10.1063/1.858280 |
[29] |
DOI: 10.1016/0017-9310(94)00135-I · doi:10.1016/0017-9310(94)00135-I |
[30] |
DOI: 10.2514/3.390 · doi:10.2514/3.390 |
[31] |
DOI: 10.1016/0017-9310(93)80025-P · doi:10.1016/0017-9310(93)80025-P |
[32] |
DOI: 10.1115/1.2910091 · doi:10.1115/1.2910091 |
[33] |
Martín, M.P. , Piomelli, U. and Candler, G.V. (2000), ”Subgrid-scale models for compressible large-eddy simulations”,Theoretical and Computational Fluid Dynamics, Vol. 13 No. 5, pp. 361-376. · Zbl 0966.76037 |
[34] |
DOI: 10.1017/S0022112096007379 · Zbl 0882.76029 · doi:10.1017/S0022112096007379 |
[35] |
DOI: 10.2514/3.12149 · doi:10.2514/3.12149 |
[36] |
DOI: 10.1080/08916158708946329 · doi:10.1080/08916158708946329 |
[37] |
DOI: 10.1063/1.858164 · Zbl 0753.76074 · doi:10.1063/1.858164 |
[38] |
DOI: 10.1016/S0017-9310(00)00313-6 · Zbl 1121.76348 · doi:10.1016/S0017-9310(00)00313-6 |
[39] |
DOI: 10.1016/S0017-9310(99)00205-7 · Zbl 0977.76521 · doi:10.1016/S0017-9310(99)00205-7 |
[40] |
DOI: 10.1016/S0017-9310(00)00180-0 · Zbl 1058.76565 · doi:10.1016/S0017-9310(00)00180-0 |
[41] |
DOI: 10.1063/1.870414 · Zbl 1184.76393 · doi:10.1063/1.870414 |
[42] |
DOI: 10.1016/S0142-727X(02)00188-1 · doi:10.1016/S0142-727X(02)00188-1 |
[43] |
DOI: 10.1016/j.paerosci.2008.06.001 · doi:10.1016/j.paerosci.2008.06.001 |
[44] |
Prakash, C. and Zerkle, R. (1995), ”Prediction of turbulent flow and heat transfer in a ribbed rectangular duct with and without rotation”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 117 No. 2, pp. 255-264. · doi:10.1115/1.2835654 |
[45] |
DOI: 10.1108/09615530410517968 · Zbl 1081.76554 · doi:10.1108/09615530410517968 |
[46] |
DOI: 10.1115/1.2841415 · doi:10.1115/1.2841415 |
[47] |
DOI: 10.1016/j.jcp.2008.11.021 · Zbl 1280.76013 · doi:10.1016/j.jcp.2008.11.021 |
[48] |
DOI: 10.1016/j.ijheatfluidflow.2005.08.010 · doi:10.1016/j.ijheatfluidflow.2005.08.010 |
[49] |
DOI: 10.1016/j.ijheatfluidflow.2008.07.001 · doi:10.1016/j.ijheatfluidflow.2008.07.001 |
[50] |
Simon, F. , Deck, S. , Guillen, P. , Sagaut, P. and Merlen, A. (2007), ”Numerical simulation of the compressible mixing layer past an axisymmetric trailing edge”,The Journal of Fluid Mechanics, Vol. 591 No. 9, pp. 215-253. · Zbl 1125.76350 · doi:10.1017/S0022112007008129 |
[51] |
DOI: 10.1016/S0142-727X(00)00007-2 · doi:10.1016/S0142-727X(00)00007-2 |
[52] |
DOI: 10.1146/annurev.fluid.010908.165130 · Zbl 1159.76036 · doi:10.1146/annurev.fluid.010908.165130 |
[53] |
DOI: 10.1007/s00162-006-0015-0 · Zbl 1112.76370 · doi:10.1007/s00162-006-0015-0 |
[54] |
DOI: 10.1108/09615530410511667 · Zbl 1303.76096 · doi:10.1108/09615530410511667 |
[55] |
DOI: 10.1016/j.ijheatfluidflow.2004.07.002 · doi:10.1016/j.ijheatfluidflow.2004.07.002 |
[56] |
Taslim, M.E. and Korotky, G.J. (1998), ”Low-aspect ratio rib heat transfer coefficient measurements in a square channel”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 120 No. 4, pp. 831-838. · doi:10.1115/1.2841796 |
[57] |
Taslim, M.E. and Lengkong, A. (1998), ”45 deg staggered rib heat transfer coefficient measurements in a square channel”,American Society of Mechanical Engineers Journal of Turbomachinery, Vol. 120 No. 3, pp. 571-580. · doi:10.1115/1.2841755 |
[58] |
DOI: 10.1016/j.ijheatfluidflow.2006.03.024 · doi:10.1016/j.ijheatfluidflow.2006.03.024 |
[59] |
Tsia, J.P. and Hwang, J.J. (1999), ”Measurements of heat transfer and fluid flow in a rectangular duct with alternate attached-detached rib-arrays”,International Journal of Heat and Fluid Flow, Vol. 42 No. 11, pp. 2071-2083. · doi:10.1016/S0017-9310(98)00300-7 |
[60] |
Vázquez, M.S. and Métais, O. (2002), ”Large-eddy simulation of the turbulent flow through a heated square duct”,Journal of Fluid Mechanics, Vol. 453 No. 6, pp. 201-238. · Zbl 1141.76414 · doi:10.1017/S0022112001006887 |
[61] |
DOI: 10.1016/j.ijheatfluidflow.2005.07.002 · doi:10.1016/j.ijheatfluidflow.2005.07.002 |
[62] |
DOI: 10.1016/j.ijheatfluidflow.2005.12.003 · doi:10.1016/j.ijheatfluidflow.2005.12.003 |
[63] |
Webb, R.L. , Eckert, E.R.G. and Goldstein, R.J. (1971), ”Heat transfer and friction in tubes with repeated-rib roughness”,International Journal of Heat and Fluid Flow, Vol. 14 No. 4, pp. 601-617. · doi:10.1016/0017-9310(71)90009-3 |
[64] |
Xia, Z. , Shi, Y. , Hong, R. , Xiao, Z. and Chen, S. (2013), ”Constrained large-eddy simulation of separated flow in a channel with streamwise-periodic constrictions”,Journal of Turbomachinery, Vol. 14 No. 1, pp. 1-21. · Zbl 1273.76231 · doi:10.1080/14685248.2012.740161 |
[65] |
DOI: 10.1063/1.865552 · Zbl 0623.76053 · doi:10.1063/1.865552 |