×

Amplitude modulation theory and its application to two-mode buckling problems. (English) Zbl 0578.73044

Summary: This paper aims to review Koiter’s theory of amplitude modulation of the local mode and presents it in a form suitable for general application. Various features of this theory are compared with Koiter’s general theory of 1945. The amplitude modulation theory is applied to two-mode buckling of stringer stiffened cylindrical shells under axial compression. New mode interaction results are reported involving the simultaneous local and overall buckling in which the local mode is postbuckling unstable.

MSC:

74G60 Bifurcation and buckling
Full Text: DOI

References:

[1] W. T. Koiter, and G. D. C. Kuiken,The interaction between local buckling and overall buckling on the behaviour of built-up columns. Delft University of Technology, Report WTHD 23, May 1971.
[2] W. T. Koiter and M. Pignataro,An alternative approach to the interaction between local and overall buckling in stiffened panels. Buckling of structures, IUTAM Symp., Harvard University, 1974. Edited by B. Budiansky, Springer-Verlag, Berlin 1976, pp. 133-148.
[3] W. T. Koiter and M. Pignataro,A general theory for the interaction between local and overall buckling of stiffened panels. Delft University of Technology, Report WTHD 83, April 1976; also Estratto dal volume, Problemi Attuali di Mecanica Teorica e Applicata, Atti del Convegno internazionale a ricordo di Modesto Panetti, Torino 1977, pp. 179-222. · Zbl 0413.73058
[4] W. T. Koiter,General theory of mode interaction in stiffened plate and shell structures. Delft University of Technology, Report WTHD 91, September 1976.
[5] W. T. Koiter,On the stability of elastic equilibrium. Doct Thesis, Delft University, Amsterdam, 1945; English Translations: NASA-TT-F10-833, 1967 and AFFDL-TR-70-25, 1970.
[6] S. Sridharan,Doubly symmetric interactive buckling of plate structures. Int J Solids & Struct,19, 625-641 1983. · Zbl 0517.73039 · doi:10.1016/0020-7683(83)90016-1
[7] S. Sridharan and R. Benito,Columns: Static and dynamic interactive buckling. J Eng Mech, ASCE,110, 49-65, January 1984. · doi:10.1061/(ASCE)0733-9399(1984)110:1(49)
[8] R. Benito and S. Sridharan,Interactive buckling analysis with finite strips. Int. J. Num. Meth. Eng., 1984, accepted for publication. · Zbl 0573.73052
[9] D. Hui,Interaction between local and overall buckling modes in axially stiffened cylindrical shells. University of Toronto, Institute for Aerospace Studies, Ph. D. thesis, 1981.
[10] E. Byskov,A review of the paper: Mode interaction of axially stiffened cylindrical shells; Effects of Stringer Axial Stiffness, Torsional Rigidity, and Eccentricity. Applied Mechanics Review, ASME,35, No. 8, August 1982, Review # 8271, p. 1224.
[11] D. Hui, R. C. Tennyson, and J. S. Hansen,Mode interaction of axially stiffened cylindrical shells: Effects of stringer axial stiffness, torsional rigidity and eccentricity. ASME J Appl Mech,48, 915-922, Dec 1981. · Zbl 0468.73052 · doi:10.1115/1.3157756
[12] E. Byskov and J. W. Hutchinson,Mode interaction in axially stiffened cylindrical shells. AIAA J,15, 941-948, July 1977. · doi:10.2514/3.7388
[13] E. Byskov and J. C. Hansen,Postbuckling and imperfection sensitivity analysis of axially stiffened cylindrical shells with mode interaction. J Struct Mech,8, 205-224, 1980, also DCAMM Report 163, August 1979.
[14] D. Hui and J. S. Hansen,Two-mode buckling of an elastically supported plate and its relation to catastrophe theory. ASME J Appl Mech,47, 607-612, September 1980. · Zbl 0446.73036 · doi:10.1115/1.3153741
[15] D. Hui,Effects of mode interaction on collapse of short, imperfect thin-walled columns. ASME J Appl Mech50, 566-573, September 1984. · Zbl 0552.73034 · doi:10.1115/1.3167675
[16] W. T. Koiter,The non-linear buckling problem of a complete spherical shell under uniform external pressure. Proc Koninklijke Nederlandse Akademie Van Wetenschappen, Ser. B,72, 40-123 1969. · Zbl 0197.22302
[17] W. B. Stephens,Imperfection-sensitivity of axially compressed stringer reinforced cylindrical panels under internal pressure. AIAA J,9, 1713-1719, September 1971. · doi:10.2514/3.6420
[18] J. W. Hutchinson and J. C. Amazigo,Imperfection-sensitivity of eccentrically stiffened cylindrical shells. AIAA J,5, 392-401, March 1967. · doi:10.2514/3.3992
[19] R. C. Tennyson, M. Booton, and D. Hui,Changes in cylindrical shell buckling behaviour resulting from system parameter variations. Proc. 15th Int Congress of Applied Mechanics, edited by Rimrott, F. P. J. and Tabarrok, B., sponsored by IUTAM, pp. 417-428, August 1980. · Zbl 0461.73030
[20] W. T. Koiter,Buckling and post-buckling behaviour of a cylindrical panel under axial compression. National Aeronautical Research Inst, Amsterdam, Report S-476, May 1956.
[21] R. C. Tennyson and J. S. Hansen,Optimum design for buckling of laminated cylinders. Collapse: The buckling of structures in theory and practice, Proc. of IUTAM Symp, edited by Thompson, J. M. T. and Hunt, G. W., August 1982, Cambridge University Press, 1983, pp. 409-429.
[22] D. Hui,Asymmetric postbuckling of symmetrically laminated cross ply, short cylindrical panels under compression. Composite Structures,3, 81-95, 1985. · doi:10.1016/0263-8223(85)90029-7
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.