FFT-based multiscale scheme for homogenisation of heterogeneous plates including damage and failure. (English) Zbl 1536.74126
Summary: This paper introduces a new approach that combines FFT-based multiscale homogenisation with the Lippman-Schwinger equation to efficiently and accurately analyse plate structures with periodic micro-structures. For the first time, the plate periodic Lippman-Schwinger equation is derived to address the auxiliary cell problem. The proposed method comprises two key components: (i) a 3D plate formulation using a novel finite prism approach, and (ii) solving the Lippman-Schwinger equations by means of Green’s functions. Solutions for both the classical and first-order plate theories are derived and implemented for linear and nonlinear problems, completed with an open-source code provided.
The efficiency and accuracy of the proposed method are assessed through several case studies, including complex woven composites. It is demonstrated that proposed method achieves a comparable level of accuracy to 3D solid problems while significantly reducing the required computing effort (i.e., milliseconds in computing time as opposed to hours required for 3D solid models). Moreover, nonlinear progressive damage problem involving an actual plate woven composite model is investigated. The results obtained show good agreement with experimental measurements for the progressive damage in plain woven composite, further highlighting the effectiveness of the proposed method.
The efficiency and accuracy of the proposed method are assessed through several case studies, including complex woven composites. It is demonstrated that proposed method achieves a comparable level of accuracy to 3D solid problems while significantly reducing the required computing effort (i.e., milliseconds in computing time as opposed to hours required for 3D solid models). Moreover, nonlinear progressive damage problem involving an actual plate woven composite model is investigated. The results obtained show good agreement with experimental measurements for the progressive damage in plain woven composite, further highlighting the effectiveness of the proposed method.
Software:
MatlabReferences:
| [1] | Zuo, Z. H.; Huang, X.; Yang, X.; Rong, J. H.; Xie, Y. M., Comparing optimal material microstructures with optimal periodic structures. Comput. Mater. Sci., 137-147 (2013) |
| [2] | Schneider, M., A review of nonlinear FFT-based computational homogenization methods. Acta Mech., 6, 2051-2100 (2021) · Zbl 1491.74099 |
| [3] | Mura, T., Micromechanics of Defects in Solids (2013), Springer Science & Business Media |
| [4] | Moulinec, H.; Suquet, P., A numerical method for computing the overall response of nonlinear composites with complex microstructure. Comput. Methods Appl. Mech. Engrg., 1-2, 69-94 (1998) · Zbl 0954.74079 |
| [5] | Moulinec, H.; Suquet, P., A fast numerical method for computing the linear and nonlinear mechanical properties of composites. C. r. de l’acad. sci. Ser II. Mecanique, phys. chimie, astron. (1994) |
| [6] | Müller, W., Fourier transforms and their application to the formation of textures and changes of morphology in solids, 61-72 |
| [7] | Bergmann, R.; Merkert, D., A framework for FFT-based homogenization on anisotropic lattices. Comput. Math. Appl., 1, 125-140 (2018) · Zbl 1524.65993 |
| [8] | Willot, F.; Pellegrini, Y.-P., Fast Fourier transform computations and build-up of plastic deformation in 2D, elastic-perfectly plastic, pixelwise disordered porous media (2008), arXiv preprint arXiv:0802.2488 |
| [9] | Gélébart, L.; Mondon-Cancel, R., Non-linear extension of FFT-based methods accelerated by conjugate gradients to evaluate the mechanical behavior of composite materials. Comput. Mater. Sci., 430-439 (2013) |
| [10] | Moulinec, H.; Silva, F., Comparison of three accelerated FFT-based schemes for computing the mechanical response of composite materials. Internat. J. Numer. Methods Engrg., 13, 960-985 (2014) · Zbl 1352.74223 |
| [11] | Michel, J.; Moulinec, H.; Suquet, P., A computational scheme for linear and non-linear composites with arbitrary phase contrast. Internat. J. Numer. Methods Engrg., 1-2, 139-160 (2001) |
| [12] | Willot, F., Fourier-based schemes for computing the mechanical response of composites with accurate local fields. C. R. Mecanique, 3, 232-245 (2015) |
| [13] | Liu, Z.; Bessa, M.; Liu, W. K., Self-consistent clustering analysis: an efficient multi-scale scheme for inelastic heterogeneous materials. Comput. Methods Appl. Mech. Engrg., 319-341 (2016) · Zbl 1436.74070 |
| [14] | Liu, T.-R.; Yang, Y.; Bacarreza, O. R.; Tang, S.; Aliabadi, M., An extended full field self-consistent cluster analysis framework for woven composite. Int. J. Solids Struct. (2023) |
| [15] | Han, X.; Gao, J.; Fleming, M.; Xu, C.; Xie, W.; Meng, S.; Liu, W. K., Efficient multiscale modeling for woven composites based on self-consistent clustering analysis. Comput. Methods Appl. Mech. Engrg. (2020) · Zbl 1442.74057 |
| [16] | Valkova, M.; Anthony, D.; Kucernak, A.; Shaffer, M.; Greenhalgh, E., Predicting the compaction of hybrid multilayer woven composite reinforcement stacks. Composites A (2020) |
| [17] | Green, S.; Matveev, M.; Long, A.; Ivanov, D.; Hallett, S., Mechanical modelling of 3D woven composites considering realistic unit cell geometry. Compos. Struct., 284-293 (2014) |
| [18] | Dirgantara, T., Boundary Element Analysis of Cracks in Shear Deformable Plates and Shells (2002), WIT · Zbl 1002.74001 |
| [19] | Liu, T.-R.; Aldakheel, F.; Aliabadi, M., Virtual element method for phase field modeling of dynamic fracture. Comput. Methods Appl. Mech. Engrg. (2023) · Zbl 1539.74452 |
| [20] | Dirgantara, T.; Aliabadi, M., A new boundary element formulation for shear deformable shells analysis. Internat. J. Numer. Methods Engrg., 9, 1257-1275 (1999) · Zbl 0930.74072 |
| [21] | Zhuang, M.; Morse, L.; Khodaei, Z. S.; Aliabadi, M., Statistical inference of the equivalent initial flaw size distribution for an anisotropic material with the dual boundary element method. Int. J. Fatigue (2022) |
| [22] | Dirgantara, T.; Aliabadi, M., Dual boundary element formulation for fracture mechanics analysis of shear deformable shells. Int. J. Solids Struct., 44-45, 7769-7800 (2001) · Zbl 1024.74046 |
| [23] | Xia, Y.; Wang, H.; Zheng, G.; Li, W.; Shen, G., Mesh-free discretization of peridynamic shell structures and coupling model with isogeometric analysis. Eng. Fract. Mech. (2023) |
| [24] | Sladek, V.; Sladek, J.; Sator, L., Physical decomposition of thin plate bending problems and their solution by mesh-free methods. Eng. Anal. Bound. Elem., 2, 348-365 (2013) · Zbl 1351.74058 |
| [25] | Dong, H.; Zheng, X.; Cui, J.; Nie, Y.; Yang, Z.; Ma, Q., Multi-scale computational method for dynamic thermo-mechanical performance of heterogeneous shell structures with orthogonal periodic configurations. Comput. Methods Appl. Mech. Engrg., 143-180 (2019) · Zbl 1441.74237 |
| [26] | Hohe, J., A direct homogenisation approach for determination of the stiffness matrix for microheterogeneous plates with application to sandwich panels. Composites B, 7, 615-626 (2003) |
| [27] | Helfen, C.; Diebels, S., A numerical homogenisation method for sandwich plates based on a plate theory with thickness change. ZAMM-J. Appl. Math. Mech./Z. Angew. Math. Mech., 2-3, 113-125 (2013) |
| [28] | Bleyer, J.; De Buhan, P., A computational homogenization approach for the yield design of periodic thin plates. Part I: Construction of the macroscopic strength criterion. Int. J. Solids Struct., 13, 2448-2459 (2014) |
| [29] | Müller, M.; Klarmann, S.; Gruttmann, F., A new homogenization scheme for beam and plate structures without a priori requirements on boundary conditions. Comput. Mech., 6, 1167-1187 (2022) · Zbl 1509.74047 |
| [30] | Xia, Z.; Zhang, Y.; Ellyin, F., A unified periodical boundary conditions for representative volume elements of composites and applications. Int. J. Solids Struct., 8, 1907-1921 (2003) · Zbl 1048.74011 |
| [31] | Gigliotti, L.; Pinho, S., Exploiting symmetries in solid-to-shell homogenization, with application to periodic pin-reinforced sandwich structures. Compos. Struct., 995-1005 (2015) |
| [32] | Yoshida, K.; Nakagami, M., Numerical analysis of bending and transverse shear properties of plain-weave fabric composite laminates considering intralaminar inhomogeneity. Adv. Compos. Mater., 2, 135-156 (2017) |
| [33] | Sun, C.-T.; Vaidya, R. S., Prediction of composite properties from a representative volume element. Compos. sci. Technol., 2, 171-179 (1996) |
| [34] | Reddy, J. N., Theory and Analysis of Elastic Plates and Shells (2006), CRC Press |
| [35] | Reddy, J. N., Mechanics of Laminated Composite Plates and Shells: Theory and Analysis (2003), CRC Press |
| [36] | Yang, K. H., Meshing, element types, and element shape functions, 51-109 |
| [37] | Onyeka, F.; Okeke, E. T., Analytical solution of thick rectangular plate with clamped and free support boundary condition using polynomial shear deformation theory. Adv. Sci. Technol. Eng. Syst. J., 1, 1427-1439 (2021) |
| [38] | Tabiei, A.; Jiang, Y., Woven fabric composite material model with material nonlinearity for nonlinear finite element simulation. Int. J. Solids Struct., 18, 2757-2771 (1999) · Zbl 0967.74023 |
| [39] | Bostanabad, R.; Liang, B.; Gao, J.; Liu, W. K.; Cao, J.; Zeng, D.; Su, X.; Xu, H.; Li, Y.; Chen, W., Uncertainty quantification in multiscale simulation of woven fiber composites. Comput. Methods Appl. Mech. Engrg., 506-532 (2018) · Zbl 1440.74102 |
| [40] | Li, H.; Khodaei, Z. S.; Aliabadi, M. F., Multiscale modelling of material degradation and failure in plain woven composites: A novel approach for reliable predictions enabled by meta-models. Compos. Sci. Technol. (2023) |
| [41] | Ferreira, A. J., MATLAB Codes for Finite Element Analysis (2009), Springer · Zbl 1192.74001 |
| [42] | Li, H.; Bacarreza, O.; Khodaei, Z. S.; Aliabadi, M. F., Numerical modelling of 2D woven composites by the projective element method. Int. J. Solids Struct. (2022) |
| [43] | Hashin, Z., Fatigue Failure Criteria for Unidirectional Fiber CompositesTech. rep. (1980), Pennsylvania Univ Philadelphia Dept of Materials Science and Engineering |
| [44] | Chen, Y.; Aliabadi, M., Micromechanical modelling of the overall response of plain woven polymer matrix composites. Internat. J. Engrg. Sci. (2019) · Zbl 1476.74119 |
| [45] | Espadas-Escalante, J. J.; van Dijk, N. P.; Isaksson, P., A study on the influence of boundary conditions in computational homogenization of periodic structures with application to woven composites. Compos. Struct., 529-537 (2017) |
| [46] | R.K. Goldberg, D.C. Stouffer, High Strain Rate Deformation Modeling of a Polymer Matrix Composite, Tech. rep., 1998. |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
