×

Vibration control of large wind turbine blades with unidirectional cable pendulum damper. (English) Zbl 1537.74116

Summary: A unidirectional cable pendulum damper is proposed to mitigate vibration responses of large-scale wind turbine blades in the edgewise direction, and the effectiveness of the proposed device for vibration response control is investigated. First, the configuration and working principles of the vibration damper are introduced. Second, the Euler-Lagrange equation of the single blade vibration damping system with the vibration damper is derived based on the Hamilton’s principle. At last, considering the effect of blade rotation, the wind load that applied on the blade was calculated using the rotating sample spectrum. The dynamic responses of blades are also calculated using the MATLAB/Simulink platform. The peak value and standard deviation of blade responses were taken as evaluation indexes to evaluate the vibration control efficiency of the device with varying the parameters such as the mass ball pendulum length, the fixed pulley block installation position, the stiffness and the pre-stress of the flexible cable. The optimal parameters of the vibration damper are investigated and obtained based on the assumption that no pounding happens between the mass ball of the vibration damper and the inner wall of the blade. Results show that the length of the mass ball pendulum and the installation position of the fixed pulley block, the values of which are within a reasonable range, can ensure the optimal performance of the vibration damper. The displacement of the mass sphere can be effectively reduced by increasing the stiffness of the flexible cable, and the pre-stress shows marginal beneficial effect on the damping performance and the displacement control of the mass sphere. Using the optimum parameters, the vibration damper can keep the mass ball within a safe running distance. The reduction of the peak value and the standard deviation of the blade displacement can reach 89.36% and 89.83%, respectively. The proposed device space can effectively reduce the blade tip response of the wind turbine by occupying less space. Moreover, the size of the device installation space can be changed by adjusting the weight ball swing length, which is suitable for the vibration control of the wind turbine blade edgewise direction.

MSC:

74H45 Vibrations in dynamical problems in solid mechanics
76G25 General aerodynamics and subsonic flows

Software:

Simulink; Matlab
Full Text: DOI

References:

[1] Forbes, K. F. and Zampelli, E. M., Accuracy of wind energy forecasts in Great Britain and prospects for improvement, Util. Policy67 (2020) 101111, https://doi.org/10.1016/j.jup.2020.101111.
[2] Carvajal-Romo, G., Valderrama-Mendoza, M., Rodríguez-Urrego, D. and Rodríguez-Urrego, L., Assessment of solar and wind energy potential in La Guajira, Colombia: Current status, and future prospects, Sustain. Energy Technol. Assess.36 (2019) 100531, https://doi.org/10.1016/j.seta.2019.100531.
[3] GWEC Report on Wind Power, Afr. Res. Bull. Econ. Financ. Tech. Ser.57(2) (2020) 22917B-22917C, https://doi.org/10.1111/j.1467-6346.2020.09409.x.
[4] Chetan, M., Griffith, D. T. and Yao, S., Flutter predictions in the design of extreme-scale segmented ultralight morphing rotor bladesAIAA SciTech 2019, 37th Wind Energy Symposium, AIAA Paper 2019-1298, San Diego, CA, , January, https://doi.org/10.2514/6.2019-1298.
[5] Murtagh, P. J., Basu, B. and Broderick, B. M., Along-wind response of a wind turbine tower with blade coupling subjected to rotationally sampled wind loading, Eng. Struct.27 (2005) 1209-1219, https://doi.org/10.1002/we.249.
[6] McNamara, R. J., Tuned mass dampers for buildings, J. Struct. Div.103 (1977) 1785-1798.
[7] Luft, R. W., Optimal tuned mass dampers for buildings, J. Struct. Div.105 (1979) 2766-2772.
[8] Gerges, R. R. and Vickrey, B. J., Wind tunnel study of the across-wind response of a slender tower with a nonlinear tuned mass damper, J. Wind Eng. Ind. Aerodyn.91 (2003) 1069-1092, https://doi.org/10.1016/S0167-6105(03)00053-9.
[9] Elias, S., Matsagar, V. and Datta, T. K., Dynamic response control of a wind-excited tall building with distributed multiple tuned mass dampers, Int. J. Struct. Stab. Dyn.19 (2019) 1950059, https://doi.org/10.1142/S0219455419500597.
[10] Yang, Y., Bashir, M. and Li, C., Mitigation of coupled wind-wave-earthquake responses of a 10 MW fixed-bottom offshore wind turbine, Renew. Energy157 (2020) 1171-1184, https://doi.org/10.1016/j.renene.2020.05.077.
[11] Barlas, T. and van Kuik, G. A. M., Review of state of the art in smart rotor control research for wind turbines, Prog. Aerosp. Sci.46(1) (2010) 1-27, https://doi.org/10.1016/j.paerosci.2009.08.002.
[12] Hoghooghi, H., Chokani, N. and Abhari, R. S., Individual blade pitch control for extended fatigue lifetime of multi-megawatt wind turbines, J. Phys. Conf. Ser.1618(2) (2020) 022008, https://doi.org/10.1088/1742-6596/1618/2/022008.
[13] Das, S., Mohamed Sajeer, M. and Chakraborty, A., Vibration control of horizontal axis offshore wind turbine blade using SMA stiffener, Smart Mater. Struct.28(9) (2019) 095025, https://doi.org/10.1088/1361-665X/ab1174.
[14] Senthilkumar, M., Mani, Y., Keerthivasan, P. and Veeraragu, J., Vibration control of small horizontal axis wind turbine blade with shape memory alloy, Smart Struct. Syst.21(3) (2018) 257-262, https://doi.org/10.12989/sss.2018.21.3.257.
[15] Murtagh, P. J., Ghosh, A., Basu, B. and Broderick, B. M., Passive control of wind turbine vibrations including blade/tower interaction and rotationally sampled turbulence, Wind Energy11(4) (2008) 305-317, https://doi.org/10.1002/we.249.
[16] Fitzgerald, B., Basu, B. and Nielsen, S. R. K., Active tuned mass dampers for control of in-plane vibrations of wind turbine blades, Struct. Control Health Monit.20(12) (2013) 1377-1396, https://doi.org/10.1002/stc.1524.
[17] Cong, C., Decentralized control of vibrations in wind turbines using multiple active tuned mass dampers with stroke constraint, Adv. Mech. Eng.10(12) (2018) 1-12, https://doi.org/10.1177/1687814018816756.
[18] Cong, C., Stochastic vibrations control of wind turbine blades based on wireless sensor, Wirel. Pers. Commun.102 (2018) 3503-3515, https://doi.org/10.1007/s11277-018-5387-0.
[19] Arrigan, J., Pakrashi, V. and Basu, B., Control of flapwise vibrations in wind turbine blades using semi-active tuned mass dampers, Struct. Control Health Monit.18(8) (2011) 840-851, https://doi.org/10.1002/stc.404.
[20] Fitzgerald, B. and Basu, B., Cable connected active tuned mass dampers for control of in-plane vibrations of wind turbine blades, J. Sound Vib.333(23) (2014) 5980-6004, https://doi.org/10.1016/j.jsv.2014.05.031.
[21] Dinh, V. N. and Basu, B., Passive control of floating offshore wind turbine nacelle and spar vibrations by multiple tuned mass dampers, Struct. Control Health Monit.22(1) (2015) 152-176, https://doi.org/10.1002/stc.1666.
[22] Basu, B., Zhang, Z. and Nielsen, S. R. K., Damping of edgewise vibration in wind turbine blades by means of circular liquid dampers, Wind Energy19(2) (2015) 213-226, https://doi.org/10.1002/we.1827.
[23] Zhang, Z., Basu, B. and Nielsen, S. R. K., Tuned liquid column dampers for mitigation of edgewise vibrations in rotating wind turbine blades, Struct. Control Health Monit.22(3) (2015) 500-517, https://doi.org/10.1002/stc.1689.
[24] Zhang, Z., Nielsen, S. R. K. and Basu, B., Nonlinear modeling of tuned liquid dampers (TLDs) in rotating wind turbine blades for damping edgewise vibrations, J. Fluids Struct.59 (2015) 252-269, https://doi.org/10.1016/j.jfluidstructs.2015.09.006.
[25] Zhang, Z. and Larsen, T. G., Optimal calibration of the rotational inertia double tuned mass damper (RIDTMD) for rotating wind turbine blades, J. Sound Vib.493 (2021) 115827, https://doi.org/10.1016/j.jsv.2020.115827.
[26] Zhang, Z. and Fitzgerald, B., Tuned mass-damper-inerter (TMDI) for suppressing edgewise vibrations of wind turbine blades, Eng. Struct.221 (2020) 110928, https://doi.org/10.1016/j.engstruct.2020.110928.
[27] Kwok, K. C. S. and Samali, B., Performance of tuned mass dampers under wind loads, Eng. Struct.17(9) (1995) 655-667, https://doi.org/10.1016/0141-0296(95)00035-6.
[28] Sadek, F., Mohraz, B., Taylor, A. W. and Chung, R. M., A method of estimating the parameters of tuned mass dampers for seismic applications, Earthq. Eng. Struct. Dyn.26(6) (1997) 617-635, https://doi.org/10.1002/(sici)1096-9845(199706)26:6<617::aid-eqe664>3.0.co;2-z.
[29] Colherinhas, G. B., Morais, M. V. G. D. and Machado, M. R., Spectral model of offshore wind turbines and vibration control by pendulum tuned mass dampers, Int. J. Struct. Stab. Dyn.22 (2022) 2250053, https://doi.org/10.1142/S0219455422500535. · Zbl 1536.76092
[30] Colherinhas, G. B., Morais, M. V. G. D., Shzu, M. A. M. and Avila, S. M., Optimal pendulum tuned mass damper design applied to high towers using genetic algorithms: Two-DOF modeling, Int. J. Struct. Stab. Dyn.19 (2019) 1950125, https://doi.org/10.1142/S0219455419501256. · Zbl 1535.70068
[31] Suhardjo, J. and Kareem, A., Feedback-feedforward control of offshore platforms under random waves, Earthq. Eng. Struct. Dyn.30(2) (2001) 213-235, https://doi.org/10.1002/1096-9845(200102)30:2<213::aid-eqe5>3.0.co;2-4.
[32] Yang, Y. and Li, C., Performance of tuned tandem mass dampers for structures under the ground acceleration, Struct. Control Health Monit.24(10) (2017) e1974, https://doi.org/10.1002/stc.1974.
[33] Chang, K. and Li, C., Performance of tuned tandem mass dampers based on shape memory alloy, IOP Conf. Ser. Earth Environ. Sci.304(5) (2019) 052014, https://doi.org/10.1088/1755-1315/304/5/052014.
[34] Zhang, Z., Nielsen, S. R. K., Blaabjerg, F. and Zhou, D., Dynamics and control of lateral tower vibrations in offshore wind turbines by means of active generator torque, Energies7(11) (2014) 7746-7772, https://doi.org/10.3390/en7117746.
[35] Lee, D., Hodges, D. H. and Patil, M. J., Multi-flexible-body dynamic analysis of horizontal axis wind turbines, Wind Energy5 (2002) 281-300, https://doi.org/10.1002/we.66.
[36] Chen, J. and Georgakis, C. T., Tuned rolling-ball dampers for vibration control in wind turbines, J. Sound Vib.332(21) (2013) 5271-5282, https://doi.org/10.1016/j.jsv.2013.05.019.
[37] Mukhopadhyay, M., Structural Dynamics (Springer Nature Switzerland AG, 2021). · Zbl 1501.74001
[38] Lanzafame, R. and Messina, M., Fluid dynamics wind turbine design: Critical analysis, optimization and application of BEM theory, Renew. Energy32(14) (2007) 2291-2305, https://doi.org/10.1016/j.renene.2006.12.010.
[39] Habib, G., Cirillo, G. I. and Kerschen, G., Uncovering detached resonance curves in single-degree-of-freedom systems, Procedia Eng.199 (2017) 649-656, https://doi.org/10.1016/j.proeng.2017.09.116.
[40] Jonkman, J., Butterfield, S., Musial, W. and Scott, G., Definition of a 5MW reference wind turbine for offshore system development, National Renewable Energy Lab., Golden, Colorado (2009). Report number: NREL/TP-500-38060, https://doi.org/10.2172/947422.
[41] Connell, J. R., The spectrum of wind speed fluctuations encountered by a rotating blade of a wind energy conversion system, Sol. Energy29(5) (1982) 363-375, https://doi.org/10.1016/0038-092x(82)90072-x.
[42] Connell, J. R., Turbulence spectrum observed by a fast-rotating wind turbine blade. Report PNL-3426, Battelle Pacific Northwest Laboratory, Richland, WA (1980).
[43] Wind Turbines-Part 1: Design Requirements, 3rd edn. (International Electrotechnical Commission, 2005-08).
[44] Svendsen, M. N., Krenk, S. and Høgsberg, J., Resonant vibration control of rotating beams, J. Sound Vib.330(9) (2011) 1877-1890, https://doi.org/10.1016/j.jsv.2010.11.008.
[45] Huang, J. Y., Chang, C. O. and Chang, C. C., Analysis of structural vibrations of vertical axis wind turbine blades via Hamilton’s principle — Part 3: Pitch angle and equilibrium state, Int. J. Struct. Stab. Dyn.21 (2021) 2150070, https://doi.org/10.1142/S021945542150070X. · Zbl 1535.74224
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.