Numerical investigation of air curtain flows in the doorway of a building using RANS and LES. (English) Zbl 1521.76275
Summary: Air curtains are commonly adopted in building flows to facilitate aerodynamic sealing against the exchange flow that occurs across an open doorway due to the density differences owing to buoyancy. This paper reports numerical simulations of air curtain flows using Reynolds-averaged Navier-Stokes (RANS) and large-eddy simulation (LES) methodologies. Computations are performed for various operating conditions that are described using a deflection modulus \((D_m)\) which ranges from 0 to 1.25. Physically, \(D_m\) represents the relative strength of the jet momentum flux compared to the transverse stack effect. The value of this deflection modulus, along with qualitative distribution of buoyancy, demarcates the operating regime of an air curtain into unstable \((D_m \lessapprox 0.1)\), stable \((D_m \gtrapprox 0.2)\), and strong installation \((D_m \gtrapprox 0.6)\). The quantification of aerodynamic sealing is established using effectiveness, \(E\), which suggests that the optimal operation lies in the stable regime with the poorest performance in the unstable regime. The comparison between various simulation methodologies suggests that 2D RANS computations generally over-predict the effectiveness, whereas both 3D RANS and LES are able to estimate \(E\) reasonably well, especially at practical values of \(D_m\). If the employed LES grid is sufficiently fine, the predicted effectiveness falls within the experimental uncertainty limits. Furthermore, we quantify the statistics of turbulence in the flow field using the transport equation of turbulent kinetic energy. This analysis reveals that shear production and turbulent dissipation are dominant processes in the flow. In comparison, the effects of transport terms and buoyancy production are rather small. These quantities are shown to scale well with \(w^3/l\) where \(w\) and \(l\) are the characteristic velocity and length scales associated with an air curtain. Visualization of large-scale coherent structures using the Q-criterion depicted the presence of long spanwise vortices in the shear layer with a wide range of scales of motion at higher \(D_m\). These vortical structures break down significantly upon impinging on the wall (floor), resulting in a complex spatiotemporal distribution of vortices.
MSC:
| 76G25 | General aerodynamics and subsonic flows |
| 76M12 | Finite volume methods applied to problems in fluid mechanics |
| 65M08 | Finite volume methods for initial value and initial-boundary value problems involving PDEs |
| 76F65 | Direct numerical and large eddy simulation of turbulence |
Keywords:
air curtain flows; large-eddy simulation; Reynolds-averaged Navier-Stokes; building flows; fluid infiltrationSoftware:
SOMAR-LESReferences:
| [1] | Kaffel A, Moureh J, Harion JL, Russeil S. Experimental investigation of a plane wall jet: application to vertical refrigerated display cabinet. In: 3rd IIR international conference on sustainability and the cold chain. 2014, p. 8-p. |
| [2] | Razeghi, S. M.J.; Safarzadeh, M.; Pasdarshahri, H., Evaluation of air curtain and emergency exhaust system for smoke confinement of an enclosure, J Build Eng, 33, Article 101650 pp. (2021) |
| [3] | Yin, S.; Nie, W.; Liu, Q.; Hua, Y., Transient CFD modelling of space-time evolution of dust pollutants and air-curtain generator position during tunneling, J Clean Prod, 239, Article 117924 pp. (2019) |
| [4] | Lv, L.; Gao, J.; Zeng, L.; Cao, C.; Zhang, J.; He, L., Performance assessment of air curtain range hood using contaminant removal efficiency: An experimental and numerical study, Build Environ, 188, Article 107456 pp. (2021) |
| [5] | Van Kennel T. Means for excluding drafts from open doorways. In: U.S. patent 774730. 1904. |
| [6] | Hayes, F. C.; Stoecker, W. F., Design data for air curtains, ASHRAE Trans, 2121, 168-180 (1969) |
| [7] | Hayes, F. C.; W. F., Stoecker, Heat transfer characteristics of the air curtain, ASHRAE Trans, 2120, 153-167 (1969) |
| [8] | Howell, R.; Shibata, M., Optimum heat transfer through turbulent recirculated plane air curtains, ASHRAE Trans, 2567, 188-200 (1980) |
| [9] | Frank, D.; Linden, P. F., The effectiveness of an air curtain in the doorway of a ventilated building, J Fluid Mech, 756, 130-164 (2014) |
| [10] | Jha, N. K.; Frank, D.; Darracq, L.; Linden, P. F., Contaminant transport by human passage through an air curtain separating two sections of a corridor: Part II-two zones at different temperatures, Energy Build, 236, Article 110728 pp. (2021) |
| [11] | Ge, Y. T.; Tassou, S. A., Simulation of the performance of single jet air curtains for vertical refrigerated display cabinets, Appl Therm Eng, 21, 2, 201-219 (2001) |
| [12] | Blocken, B., LES over RANS in building simulation for outdoor and indoor applications: A foregone conclusion?, (Building simulation, 11 (2018), Springer), 821-870 |
| [13] | Costa, J. J.; Oliveira, L. A.; Silva, MCG, Energy savings by aerodynamic sealing with a downward-blowing plane air curtain—A numerical approach, Energy Build, 38, 10, 1182-1193 (2006) |
| [14] | Foster, A. M.; Swain, M. J.; Barrett, R.; D’agaro, P.; James, S. J., Effectiveness and optimum jet velocity for a plane jet air curtain used to restrict cold room infiltration, Int J Refrig, 29, 5, 692-699 (2006) |
| [15] | Foster, AM; Swain, MJ; Barrett, R.; D’Agaro, P.; Ketteringham, LP; James, SJ, Three-dimensional effects of an air curtain used to restrict cold room infiltration, Appl Math Model, 31, 6, 1109-1123 (2007) · Zbl 1241.76330 |
| [16] | Gonçalves, J. C.; Costa, J. J.; Figueiredo, A. R.; Lopes, AMG, CFD modelling of aerodynamic sealing by vertical and horizontal air curtains, Energy Build, 52, 153-160 (2012) |
| [17] | Krajewski, G.; Wegrzynski, W., Air curtain as a barrier for smoke in case of fire: Numerical modelling, Bull Pol Acad Sci Tech Sci, 145-153 (2015) |
| [18] | Khayrullina, A.; van Hooff, T.; Blocken, B.; van Heijst, G., Validation of steady RANS modelling of isothermal plane turbulent impinging jets at moderate Reynolds numbers, Eur J Mech B Fluids, 75, 228-243 (2019) |
| [19] | Khayrullina, A.; Blocken, B.; de Almeida, MOM; van Hooff, T.; van Heijst, GJ, Impact of a wall downstream of an air curtain nozzle on air curtain separation efficiency, Build Environ, 197, Article 107873 pp. (2021) |
| [20] | Smagorinsky, J., General circulation experiments with the primitive equations: I. The basic experiment, Mon Weather Rev, 91, 3, 99-164 (1963) |
| [21] | Germano, M.; Piomelli, U.; Moin, P.; Cabot, W. H., A dynamic subgrid-scale eddy viscosity model, Phys Fluids A, 3, 7, 1760-1765 (1991) · Zbl 0825.76334 |
| [22] | Moureh, J.; Yataghene, M., Large-eddy simulation of an air curtain confining a cavity and subjected to an external lateral flow, Comput & Fluids, 152, 134-156 (2017) · Zbl 1390.76200 |
| [23] | Beaubert, F.; Viazzo, S., Large eddy simulations of plane turbulent impinging jets at moderate Reynolds numbers, Int J Heat Fluid Flow, 24, 4, 512-519 (2003) |
| [24] | Ruiz, C. A.; van Hooff, T.; Blocken, B.; van Heijst, G., Air curtain performance: Introducing the adapted separation efficiency, Build Environ, 188, Article 107468 pp. (2021) |
| [25] | Jha, N. K.; Frank, D.; Linden, P. F., Contaminant transport by human passage through an air curtain separating two sections of a corridor: Part I-uniform ambient temperature, Energy Build, 236, Article 110818 pp. (2021) |
| [26] | Kundu, P. K.; Cohen, I. M.; Dowling, D. R., Fluid mechanics (2015), Academic Press |
| [27] | Yakhot, V.; Orszag, SA; Thangam, S.; Gatski, TB; Speziale, CG, Development of turbulence models for shear flows by a double expansion technique, Phys Fluids A, 4, 7, 1510-1520 (1992) · Zbl 0762.76044 |
| [28] | Gutmark, E.; Wygnanski, I., The planar turbulent jet, J Fluid Mech, 73, 3, 465-495 (1976) |
| [29] | Rajaratnam, N., Turbulent jets (1976), Elsevier |
| [30] | Khayrullina, A.; van Hooff, T.; Blocken, B.; van Heijst, GJF, PIV measurements of isothermal plane turbulent impinging jets at moderate Reynolds numbers, Exp Fluids, 58, 4, 31 (2017) |
| [31] | Kumar, N.; Mukherjee, P.; Chalamalla, VK; Dewan, A.; Balasubramanian, S., Assessment of RANS-based turbulence model for forced plume dynamics in a linearly stratified environment, Comput & Fluids, 235, Article 105281 pp. (2022) · Zbl 1521.76123 |
| [32] | ANSYS Inc, ANSYS fluent 18.2 - theory guide (2017), ANSYS, Inc. |
| [33] | Ducros, F.; Comte, P.; Lesieur, M., Large-eddy simulation of transition to turbulence in a boundary layer developing spatially over a flat plate, J Fluid Mech, 326, 1-36 (1996) · Zbl 0917.76032 |
| [34] | Santilli, E.; Scotti, A., The stratified ocean model with adaptive refinement (SOMAR), J Comput Phys, 291, 60-81 (2015) · Zbl 1349.86027 |
| [35] | Chalamalla, VK; Santilli, E.; Scotti, A.; Jalali, M.; Sarkar, S., SOMAR-LES: A framework for multi-scale modeling of turbulent stratified oceanic flows, Ocean Model, 120, 101-119 (2017) |
| [36] | Varma, D.; Chalamalla, V. K.; Mathur, M., Spontaneous superharmonic internal wave excitation by modal interactions in uniform and nonuniform stratifications, Dyn Atmos Oceans, 91, Article 101159 pp. (2020) |
| [37] | Passaggia, PY; Chalamalla, VK; Hurley, MW; Scotti, A.; Santilli, E., Estimating pressure and internal-wave flux from laboratory experiments in focusing internal waves, Exp Fluids, 61, 11, 1-29 (2020) |
| [38] | Zemskova, V. E.; White, B. L.; Scotti, A., Energetics of a rotating wind-forced horizontal convection model of a reentrant channel, J Phys Oceanogr, 51, 7, 2271-2290 (2021) |
| [39] | Agrawal, T.; Peddada, S. H.; Chalamalla, V. K., Dynamics of a buoyant gravity current propagating in a linearly stratified medium, Phys Fluids, 34, 7, Article 076605 pp. (2022) |
| [40] | Bonometti, T.; Balachandar, S., Effect of Schmidt number on the structure and propagation of density currents, Theor Comput Fluid Dyn, 22, 5, 341-361 (2008) · Zbl 1178.76115 |
| [41] | Agrawal, T.; Ramesh, B.; Zimmerman, SJ; Philip, J.; Klewicki, JC, Probing the high mixing efficiency events in a lock-exchange flow through simultaneous velocity and temperature measurements, Phys Fluids, 33, 1, Article 016605 pp. (2021) |
| [42] | Guyonnaud, L.; Solliec, C.; Dufresne de Virel, M.; Rey, C., Design of air curtains used for area confinement in tunnels, Exp Fluids, 28, 4, 377-384 (2000) |
| [43] | Agrawal, T.; Jha, N. K.; Chalamalla, V. K., Towards understanding air curtain flows using RANS based numerical simulations, (Proceedings of the 26th national and 4th international ISHMT-ASTFE heat and mass transfer conference (2021), IIT Madras) |
| [44] | Deo, R. C.; Mi, J.; Nathan, G. J., The influence of Reynolds number on a plane jet, Phys Fluids, 20, 7, Article 075108 pp. (2008) · Zbl 1182.76199 |
| [45] | Roache, P. J., Verification and validation in computational science and engineering, vol. 895 (1998), Hermosa Albuquerque, NM |
| [46] | Browne, L. W.B.; Antonia, R. A.; Rajagopalan, S.; Chambers, A. J., Interaction region of a two-dimensional turbulent plane jet in still air, (Structure of complex turbulent shear flow (1983), Springer), 411-419 |
| [47] | Mi, J.; Deo, R. C.; Nathan, G. J., Characterization of turbulent jets from high-aspect-ratio rectangular nozzles, Phys Fluids, 17, 6, Article 068102 pp. (2005) · Zbl 1187.76350 |
| [48] | Deo, R. C.; Mi, J.; Nathan, G. J., The influence of nozzle aspect ratio on plane jets, Exp Therm Fluid Sci, 31, 8, 825-838 (2007) |
| [49] | Ramaprian, B. R.; Chandrasekhara, M. S., LDA measurements in plane turbulent jets, J Fluids Eng, 107, 2, 264-271 (1985) |
| [50] | Stanley, S. A.; Sarkar, S.; Mellado, J. P., A study of the flow-field evolution and mixing in a planar turbulent jet using direct numerical simulation, J Fluid Mech, 450, 377-407 (2002) · Zbl 1049.76558 |
| [51] | Brown, W. G.; Solvason, K. R., Natural convection through rectangular openings in partitions—1: Vertical partitions, Int J Heat Mass Transfer, 5, 9, 859-868 (1962) |
| [52] | Wilson, D. J.; Kiel, D. E., Gravity driven counterflow through an open door in a sealed room, Build Environ, 25, 4, 379-388 (1990) |
| [53] | Linden, P. F., The fluid mechanics of natural ventilation, Annu Rev Fluid Mech, 31, 1, 201-238 (1999) |
| [54] | Rottman, J. W.; Simpson, J. E., Gravity currents produced by instantaneous releases of a heavy fluid in a rectangular channel, J Fluid Mech, 135, 95-110 (1983) |
| [55] | Shin, J. O.; Dalziel, S. B.; Linden, P. F., Gravity currents produced by lock exchange, J Fluid Mech, 521, 1-34 (2004) · Zbl 1065.76037 |
| [56] | Dalziel, S. B.; Lane-Serff, G. F., The hydraulics of doorway exchange flows, Build Environ, 26, 2, 121-135 (1991) |
| [57] | Morton, B. R.; Taylor, G. I.; Turner, J. S., Turbulent gravitational convection from maintained and instantaneous sources, Proc R Soc Lond Ser A Math Phys Eng Sci, 234, 1196, 1-23 (1956) · Zbl 0074.45402 |
| [58] | Turner, J. S., Turbulent entrainment: the development of the entrainment assumption, and its application to geophysical flows, J Fluid Mech, 173, 431-471 (1986) |
| [59] | van Reeuwijk, M.; Craske, J., Energy-consistent entrainment relations for jets and plumes, J Fluid Mech, 782, 333-355 (2015) · Zbl 1381.76138 |
| [60] | Gayen, B.; Hughes, G. O.; Griffiths, R. W., Completing the mechanical energy pathways in turbulent Rayleigh-Bénard convection, Phys Rev Lett, 111, 12, Article 124301 pp. (2013) |
| [61] | Hunt, J. C.R.; Wray, A. A.; Moin, P., Eddies, streams, and convergence zones in turbulent flows, Studying Turbulence using Numerical Simulation Databases, 2. Proceedings of the 1988 Summer Program (1988) |
| [62] | Jeong, J.; Hussain, F., On the identification of a vortex, J Fluid Mech, 285, 69-94 (1995) · Zbl 0847.76007 |
| [63] | Dong, Y.; Yan, Y.; Liu, C., New visualization method for vortex structure in turbulence by lambda2 and vortex filaments, Appl Math Model, 40, 1, 500-509 (2016) · Zbl 1443.76021 |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
