Formulating the shear stress distribution in circular open channels based on the Renyi entropy. (English) Zbl 1514.82209
Summary: The principle of maximum entropy is employed to derive the shear stress distribution by maximizing the Renyi entropy subject to some constraints and by assuming that dimensionless shear stress is a random variable. A Renyi entropy-based equation can be used to model the shear stress distribution along the entire wetted perimeter of circular channels and circular channels with flat beds and deposited sediments. A wide range of experimental results for 12 hydraulic conditions with different Froude numbers (0.375 to 1.71) and flow depths (20.3 to 201.5 mm) were used to validate the derived shear stress distribution. For circular channels, model performance enhanced with increasing flow depth (mean relative error (\(RE\)) of 0.0414) and only deteriorated slightly at the greatest flow depth (\(RE\) of 0.0573). For circular channels with flat beds, the Renyi entropy model predicted the shear stress distribution well at lower sediment depth. The Renyi entropy model results were also compared with Shannon entropy model results. Both models performed well for circular channels, but for circular channels with flat beds the Renyi entropy model displayed superior performance in estimating the shear stress distribution. The Renyi entropy model was highly precise and predicted the shear stress distribution in a circular channel with \(RE\) of 0.0480 and in a circular channel with a flat bed with \(RE\) of 0.0488.
References:
| [1] | Knight, D. W., Boundary shear in smooth and rough channels, J. Hydraul. Div., 107, 7, 839-851 (1981) |
| [2] | Tominaga, A.; Nezu, I.; Ezaki, K.; Nakagawa, H., Three dimensional turbulent structure in straight open channel flows, J. Hydraul. Res., 27, 149-173 (1989) |
| [3] | Kleijwegt, R. A., On Sediment Transport in Circular Sewers with Non-Cohesive Deposits (1992), TUDelft, The Netherlands, (Ph.D thesis) |
| [4] | Rhodes, D. G.; Knight, D. W., Distribution of shear force on boundary of smooth rectangular duct, J. Hydraul. Eng., 120, 7, 787-807 (1994) |
| [5] | S. Atabay, D.W. Knight, G. Seckin, Influence of a mobile bed on the boundary shear in a compound channel, in: Proc. Int. Conf. on Fluvial Hydraulics, River Flow, Naples, Italy, 2004, pp. 337-345. |
| [6] | Seckin, G.; Seckin, N.; Yurtal, R., Boundary shear stress analysis in smooth rectangular channels, Can. J. Civil Eng., 33, 336-342 (2006) |
| [7] | Knight, D. W.; Sterling, M., Boundary shear in circular pipes partially full, J. Hydraul. Eng., 126, 4, 263-275 (2000) |
| [8] | Khodashenas, S. R.; Paquier, A., A geometrical method for computing the distribution of boundary shear stress across irregular straight open channel, J. Hydraul. Res., 37, 381-388 (1999) |
| [9] | Berlamont, J. E.; Trouw, K.; Luyckx, G., Shear stress distribution in partially filled pipes, J. Hydraul. Eng., 129, 9, 697-705 (2003) |
| [10] | Yang, S. Q.; Lim, S. Y., Boundary shear stress distributions in trapezoidal channels, J. Hydraul. Res., 43, 1, 98-102 (2005) |
| [11] | Zarrati, A. R.; Jin, Y. C.; Karimpour, S., Semianalytical model for shear stress distribution in simple and compound open channels, J. Hydraul. Eng., 134, 2, 205-215 (2008) |
| [12] | Kabiri-Samani, A.; Farshi, F.; Chamani, M. R., Boundary shear stress in smooth trapezoidal open channel flows, J. Hydraul. Eng., 139, 2, 205-212 (2013) |
| [13] | Yang, J. Q.; Kerger, F.; Napf, H. M., Estimation of the bed shear stress in vegetated and bare channels with smooth beds: estimation of the bed shear stress, Water Resour. Res., 51, 5, 3647-3663 (2015) |
| [14] | Bonakdari, H.; Larrarte, F.; Joannis, C., Study of shear stress in narrow channels: application to sewers, J. Urban Water, 5, 1, 15-20 (2008) |
| [15] | Chiu, C. L., Entropy and probability concepts in hydraulics, J. Hydraul. Eng., 113, 5, 583-599 (1987) |
| [16] | Shannon, C. E., A mathematical theory of communications, I and II, Bell Syst. Tech. J., 27, 379-423 (1948) · Zbl 1154.94303 |
| [17] | Chiu, C. L., Entropy and 2-D velocity distribution in open channels, J. Hydraul. Eng., 114, 7, 738-756 (1988) |
| [18] | Chiu, C. L., Velocity distribution in open channel flow, J. Hydraul. Eng., 115, 5, 576-594 (1989) |
| [19] | Chiu, C. L.; Murrat, D. W., Variation of velocity distribution along nonuniform open channel flow, J. Hydraul. Eng., 118, 7, 989-1001 (1992) |
| [20] | Chiu, C. L.; Abidin Said, C. A., Maximum and mean velocities and entropy in open-channel flow, J. Hydraul. Eng., 121, 1, 26-35 (1995) |
| [21] | Araujo, J.; Chaudhry, F., Experimental evaluation of 2-D entropy model for open-channel flow, J. Hydraul. Eng., 124, 10, 1064-1067 (1998) |
| [22] | Chiu, C. L.; Tung, N. C., Maximum velocity and regularities in open-channel flow, J. Hydraul. Eng., 128, 4, 390-398 (2002) |
| [23] | Moramarco, T.; Saltalippi, C.; Singh, V. P., Estimation of mean velocity in natural channels based on Chiu’s velocity distribution equation, J. Hydrologic Eng., 9, 1, 42-50 (2004) |
| [24] | Chiu, C. L.; Hsu, S. M.; Tung, N. C., Efficient methods of discharge measurement in rivers and stream based on the probability concept, J. Hydrol. Process., 19, 3935-3946 (2005) |
| [25] | Moramarco, T.; Singh, V. P., Formulation of the entropy parameter based on hydraulic and geometric characteristics of river cross sections, J. Hydrologic Eng., 15, 10, 852-858 (2010) |
| [26] | Marini, G.; Martino, G. D.; Fontana, N.; Fiorentino, M.; Singh, V. P., Entropy approach for 2D velocity distribution in open-channel flow, J. Hydraul. Res., 49, 6, 784-790 (2011) |
| [27] | Singh, V. P.; Marini, G.; Fontana, N., Derivation of 2D power-law velocity distribution using entropy theory, J. Entropy, 15, 4, 1221-1231 (2013) · Zbl 1326.86003 |
| [28] | A. Renyi, On measures of entropy and information, in: Proc. 4th Berkeley Symposium on Mathematics. Statistics and Probability, vol. 1, 1961, pp. 547-561. · Zbl 0106.33001 |
| [29] | Tsallis, C., Possible egeneralization of Boltzmann-Gibbs statistics, J. Stat. Phys., 52, 1-2, 479-487 (1988) · Zbl 1082.82501 |
| [30] | Luo, H.; Singh, V., Entropy theory for two-dimensional velocity distribution, J. Hydrol. Eng., 16, 4, 303-315 (2011) |
| [31] | Cui, H.; Singh, V. P., Two-dimensional velocity distribution in open channels using the Tsallis entropy, J. Hydrol. Eng., 18, 3, 331-339 (2013) |
| [32] | Cui, H.; Singh, V. P., One dimensional velocity distribution in open channels using Tsallis entropy, J. Hydrol. Eng., 19, 2, 290-298 (2014) |
| [33] | Bonakdari, H.; Moazamnia, M., Modeling of velocity fields by the entropy concept in narrow open channels, KSCE J. Civil Eng., 19, 3, 779-789 (2015) |
| [34] | Kumbhakar, M.; Ghoshal, K., One-dimensional velocity distribution in open channels using renyi entropy, J Stoch. Environ. Res. Risk Assess. (2016) · Zbl 1400.82278 |
| [35] | Kumbhakar, M.; Ghoshal, K., Two dimensional velocity distribution in open channels using renyi entropy, J. Phys. A, 450, 546-559 (2016) · Zbl 1400.82278 |
| [36] | Sterling, M.; Knight, D. W., An attempt at using the entropy approach to predict the transverse distribution of boundary shear stress in open channel flow, J. Stoch. Environ. Res. Risk Assess., 16, 127-142 (2002) · Zbl 1023.76039 |
| [37] | Sheikh, Z.; Bonakdari, H., Prediction of boundary shear stress in circular and trapezoidal channels with entropy concept, J. Urban Water, 13, 6, 629-636 (2015) |
| [38] | Bonakdari, H.; Sheikh, Z.; Tooshmalani, M., Comparison between Shannon and Tsallis entropies for prediction of shear stress distribution in circular open channels, J. Stoch. Environ. Res. Risk Assess., 29, 1, 1-11 (2015) |
| [39] | Bonakdari, H.; Tooshmalani, M.; Sheikh, Z., Predicting shear stress distribution in rectangular channels using entropy concept, Int. J. Eng., 28, 3, 357-364 (2015) |
| [40] | Knight, D. W.; Yuen, K. W.H.; Al Hamid, A. A.I., Boundary shear stress distributions in open channel flow, (Beven, K.; Chatwin, P.; Millbank, J., Physical Mechanisms of Mixing and Transport in the Environment (1994), Wiley New York), 51-87 |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
