×

Application of the immersed-body method to simulate wave-structure interactions. (English) Zbl 1408.76166

Summary: This study aims at demonstrating the capability of the immersed-body method to simulate wave-structure interactions using a non-linear finite-element model. In this approach, the Navier-Stokes equations are solved on an extended mesh covering the whole computational domain (i.e., fluids and structure). The structure is identified on the extended mesh through a nonzero solid-concentration field, which is obtained by conservatively mapping the mesh discretising the structure onto the extended mesh. A penalty term relaxes the fluid and structural velocities to one another in the regions covered by the structure. The paper is novel in that it combines the immersed-body method with wave modelling and mesh adaptivity. The focus of the paper is therefore on demonstrating the capability of this new methodology in reproducing well-established test cases, rather than investigating new physical phenomena in wave-structure interactions. Two cases are considered for a bottom-mounted pile. First, the pile is placed in a numerical wave tank, where propagating waves are modelled through a free-surface boundary condition. For regular and irregular waves, it is shown that the wave dynamics are accurately modelled by the computational fluid dynamics model and only small discrepancies are observed in the close vicinity of the structure. Second, the structure is subjected to a dam-break wave impact obtained by removing a barrier between air and water. In that case, an additional advection equation is solved for a fluid-concentration field that tracks the evolution of the air-water interface. It is shown that the load associated with the wave impact on the structure compares well with existing numerical and experimental data.

MSC:

76D05 Navier-Stokes equations for incompressible viscous fluids
74F10 Fluid-solid interactions (including aero- and hydro-elasticity, porosity, etc.)
76M10 Finite element methods applied to problems in fluid mechanics

References:

[1] Peskin, C., Flow patterns around heart valves: A numerical method, J. Comput. Phys., 10, 252-271, (1972) · Zbl 0244.92002
[2] Mittal, R.; Dong, H.; Bozkurttas, M.; Najjar, F.; Vargas, A.; von Loebbecke, A., A versatile sharp interface immersed boundary method for incompressible flows with complex boundaries, J. Comput. Phys., 227, 4825-4852, (2008) · Zbl 1388.76263
[3] Iaccarino, G.; Verzicco, R., Immersed boundary technique for turbulent flow simulations, Appl. Mech. Rev., 56, 3, 331-347, (2003)
[4] Mittal, R.; Iaccarino, G., Immersed boundary methods, Annu. Rev. Fluid Mech., 37, 239-261, (2005) · Zbl 1117.76049
[5] Verzicco, R.; Mohd-Yusof, J.; Orlandi, P.; Haworth, D., Large-eddy simulation in complex geometric configurations using boundary body forces, AIAA J., 38, 3, 427-433, (2000)
[6] Verzicco, R.; Fatica, M.; Iaccarino, G.; Orlandi, P., Flow in an impeller-stirred tank using an immersed-boundary method, Fluid Mech. Transp. Phenom., 50, 6, 1109-1118, (2004)
[7] Folley, M.; Babarit, A.; Child, B.; Forehand, D.; O’Boyle, L.; Silverthorne, K.; Spinneken, J.; Stratigaki, V.; Troch, P., A review of numerical modelling of wave energy converter arrays, (Proceedings of the ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering, vol. 7, (2012), American Society of Mechanical Engineers), 535-546
[8] R. MacCamy, R. Fuchs, Wave forces on piles: a diffraction theory, Technical Memorandum 69, US Beach Erosion Board, 1954.
[9] Maguire, A., Geometric design considerations and control methodologies for absorbing wavemakers, (2011), The University of Edinburgh, (Ph.D. thesis)
[10] Pain, C.; Piggott, M.; Goddard, A.; Fang, F.; Gorman, G.; Marshall, D.; Eaton, M.; Power, P.; de Oliveira, C., Three-dimensional unstructured mesh Ocean modelling, Ocean Modell., 10, 5-33, (2005)
[11] Piggott, M.; Gorman, G.; Pain, C.; Allison, P.; Candy, A.; Martin, B.; Wells, M., A new computational framework for multi-scale Ocean modelling based on adapting unstructured meshes, Internat. J. Numer. Methods Fluids, 56, 1003-1015, (2008) · Zbl 1220.76045
[12] J. Spinneken, V. Heller, S. Kramer, M. Piggott, A. Viré, Assessment of an advanced finite element tool for the simulation of fully-nonlinear gravity water waves, in: I. S. of Offshore, P. Engineers (Eds.), Proceedings of the Twenty-Second International Offshore and Polar Engineering Conference, vol. 3, 2012, pp. 1043-1050.
[13] A. Viré, J. Xiang, M. Piggott, J. Spinneken, C. Pain, Numerical modelling of fluid-structure interactions for floating wind turbine foundations, in: Proceedings of the International Offshore and Polar Engineering Conference, 2013, pp. 377-382.
[14] Viré, A.; Xiang, J.; Milthaler, F.; Farrell, P.; Piggott, M.; Latham, J.-P.; Pavlidis, D.; Pain, C., Modelling of fluid-solid interactions using an adaptive mesh fluid model coupled with a combined finite-discrete element model, Ocean Dyn., 62, 1487-1501, (2012)
[15] Sharma, J. N.; Dean, R. G., Second order directional seas and associated wave forces, J. Soc. Pet. Eng., 21, 129-140, (1981)
[16] Hu, K.; Hsiao, S.; Hwung, H.; Wu, T., Three-dimensional numerical modeling of the interaction of dam-break waves and porous media, Adv. Water Resour., 47, 14-30, (2012)
[17] Pain, C.; Umpleby, A.; de Oliveira, C.; Goddard, A., Tetrahedral mesh optimisation and adaptivity for steady-state and transient finite element calculations, Comput. Methods Appl. Mech. Engrg., 190, 3771-3796, (2001) · Zbl 1008.76041
[18] Piggott, M.; Farrell, P.; Wilson, C.; Gorman, G.; Pain, C., Anisotropic mesh adaptivity for multi-scale Ocean modelling, Phil. Trans. R. Soc. A, 367, 4591-4611, (2009) · Zbl 1192.86009
[19] Holthuijsen, L., Waves in oceanic and coastal waters, (2007), Cambridge University Press
[20] Kramer, S.; Wilson, C.; Davies, D., An implicit free surface algorithm for geodynamical simulations, Phys. Earth Planet. Inter., 194-195, 25-37, (2012)
[21] Cotter, C.; Ham, D.; Pain, C., A mixed discontinuous/continuous finite element pair for shallow-water Ocean modelling, Ocean Modell., 26, 86-90, (2009)
[22] Oishi, Y.; Piggott, M.; Maeda, T.; Kramer, S.; Collins, G.; Tsushima, H.; Furumura, T., Three-dimensional tsunami propagation simulations using an unstructured mesh finite element model, J. Geophys. Res. Solid Earth, 118, 2998-3018, (2013)
[23] Wilson, C., Modelling multiple-material flows on adaptive, unstructured meshes, (2009), Imperial College London, (Ph.D. thesis)
[24] Bassi, F.; Rebay, S., A high-order accurate discontinuous finite element method for the numerical solution of the compressible Navier-Stokes equations, J. Comput. Phys., 131, 267-279, (1997) · Zbl 0871.76040
[25] Viré, A.; Xiang, J.; Pain, C., An immersed-shell method for modelling fluid-structure interactions, Phil. Trans. R. Soc. A, 373, (2015), (20140085)
[26] Löhner, R., Robust vectorized search algorithms for interpolation on unstructured grids, J. Comput. Phys., 118, 2, 380-387, (1995) · Zbl 0826.65007
[27] Hiester, H.; Piggott, M.; Farrell, P.; Allison, P., Assessment of spurious mixing in adaptive mesh simulations of the two-dimensional lock-exchange, Ocean Modell., 73, 30-44, (2014)
[28] Stelling, G.; Zijlema, M., An accurate and efficient finite-difference algorithm for non-hydrostatic free-surface flow with application to wave propagation, Internat. J. Numer. Methods Fluids, 43, 1-23, (2003) · Zbl 1032.76645
[29] Hasselmann, K.; Barnett, T. P.; Bouws, E.; Carlson, H.; Cartwright, D.; Enke, K.; Ewing, J. A.; Gienapp, H.; Hasselmann, D. E.; Kruseman, P.; Meerburg, A.; Müller, P.; Olbers, D. J.; Richter, K.; Sell, W.; Walden, H., Measurements of wind-wave growth and swell decay during the joint north sea wave project (JONSWAP), tech. rep., (1973), Deutsches Hydrographisches Institut
[30] Baldock, T.; Swan, C.; Taylor, P., A laboratory study of nonlinear surface waves on water, Phil. Trans. R. Soc. A, 354, 649-676, (1996)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.