×

Application of a biparametric perturbation method to large-deflection circular plate problems with a bimodular effect under combined loads. (English) Zbl 1302.74200

Summary: The large deflection condition of a bimodular plate may yield a dual nonlinear problem where the superposition theorem is inapplicable. In this study, the bimodular Föppl-von Kármán equations of a plate subjected to the combined action of a uniformly distributed load and a centrally concentrated force are solved using a biparametric perturbation method. First, the deflection and radial membrane stress were expanded in double power series with respect to the two types of loads. However, the biparametric perturbation solution obtained exhibited a relatively slow rate of convergence. Next, by introducing a generalized load and its corresponding generalized displacement, the solution is expanded in a single power series with respect to the generalized displacement parameter, thereby leading to the better convergence on the solution. A numerical simulation is also used to verify the correctness of the biparametric perturbation solution. The introduction of a bimodular effect will modify the stiffness of the plate to some extent. In particular, the bearing capacity of the plate will be strengthened further when the compressive modulus is greater than the tensile modulus.

MSC:

74S30 Other numerical methods in solid mechanics (MSC2010)
74K20 Plates
35Q74 PDEs in connection with mechanics of deformable solids
Full Text: DOI

References:

[1] Ambartsumyan, S. A., Elasticity Theory of Different Moduli (1986), China Railway Publishing House: China Railway Publishing House Beijing, translated by R.F. Wu, Y.Z. Zhang
[2] Ambartsumyan, S. A.; Khachatryan, A. A., Basic equations in the theory of elasticity for materials with different stiffness in tension and compression, Inzh. Zh. MTT, 2, 44-53 (1966)
[3] Borisovich, A.; Dymkowska, J.; Szymczak, C., Buckling and postcritical behaviour of the elastic infinite plate strip resting on linear elastic foundation, J. Math. Anal. Appl., 307, 480-495 (2005) · Zbl 1069.74019
[4] Chen, S. L.; Kuang, J. C., The perturbation parameter in the problem of large deflection of clamped circular plates, Appl. Math. Mech. (English Ed.), 2, 137-154 (1981) · Zbl 0628.73047
[5] Chien, W. Z., Large deflection of a circular clamped plate under uniform pressure, Chinese J. Phys., 7, 102-113 (1947)
[6] Chien, W. Z., Second order approximation solution of nonlinear large deflection problem of Yongjiang Railway Bridge in Ningbo, Appl. Math. Mech. (English Ed.), 23, 441-451 (2002)
[7] He, X. T.; Chen, S. L., Biparametric perturbation solution of large deflection problem of cantilever beams, Appl. Math. Mech. (English Ed.), 27, 453-460 (2006) · Zbl 1144.74021
[8] He, X. T.; Zheng, Z. L.; Sun, J. Y., Convergence analysis of a finite element method based on different moduli in tension and compression, Internat. J. Solids Structures, 46, 3734-3740 (2009) · Zbl 1183.74282
[9] He, X. T.; Chen, Q.; Sun, J. Y., Application of the Kirchhoff hypothesis to bending thin plates with different moduli in tension and compression, J. Mech. Mater. Struct., 5, 755-769 (2010)
[10] He, X. T.; Hu, X. J.; Sun, J. Y., An analytical solution of bending thin plates with different moduli in tension and compression, Struct. Eng. Mech., 36, 363-380 (2010)
[11] He, X. T.; Chen, Q.; Sun, J. Y., Large-deflection axisymmetric deformation of circular clamped plates with different moduli in tension and compression, Int. J. Mech. Sci., 62, 103-110 (2012)
[12] He, X. T.; Cao, L.; Li, Z. Y., Nonlinear large deflection problems of beams with gradient: a biparametric perturbation method, Appl. Math. Comput., 219, 7493-7513 (2013) · Zbl 1457.74107
[13] He, X. T.; Sun, J. Y.; Wang, Z. X., General perturbation solution of large-deflection circular plate with different moduli in tension and compression under various edge conditions, Internat. J. Non-Linear Mech., 55, 110-119 (2013)
[14] Hu, H. C., On the large deflection of a circular plate under combined action of uniformly distributed load and concentrated load at the center, Chinese J. Phys., 10, 383-394 (1954)
[15] Huang, C., Large deflection of circular plate under compound load, Appl. Math. Mech. (English Ed.), 4, 791-804 (1983) · Zbl 0533.73056
[16] Jones, R. M., Apparent flexural modulus and strength of multimodulus materials, J. Compos. Mater., 10, 342-354 (1976)
[17] Jones, R. M., Stress-strain relations for materials with different moduli in tension and compression, AIAA J., 15, 16-23 (1977)
[18] Nowinski, J. L.; Ismail, I. A., Application of a multi-parameter perturbation method to elastostatics, Dev. Theor. Appl. Mech., 2, 35-45 (1965)
[19] Ryzhkova, I., Stabilization of von Kármán plate in the presence of thermal effects in a subsonic potential flow of gas, J. Math. Anal. Appl., 294, 462-481 (2004) · Zbl 1052.35031
[20] Schmidt, R.; DaDeppo, D. A., A new approach to the analysis of shells, plates and membranes with finite deflection, Internat. J. Non-Linear Mech., 9, 409-419 (1974) · Zbl 0296.73049
[21] Sun, J. Y.; Zhu, H. Q.; Qin, S. H., A review on the research of mechanical problems with different moduli in tension and compression, J. Mech. Sci. Technol., 24, 1845-1854 (2010)
[22] Vincent, J. J., The bending of a thin circular plate, Philos. Mag., 12, 185-196 (1931) · JFM 57.1060.03
[23] Yao, W. J.; Zhang, C. H.; Jiang, X. F., Nonlinear mechanical behavior of combined members with different moduli, Int. J. Nonlinear Sci. Numer. Simul., 7, 233-238 (2006)
[24] Ye, Z. M.; Chen, T.; Yao, W. J., Progresses in elasticity theory with different modulus in tension and compression and related FEM, Chinese J. Mech. Eng., 26, 9-14 (2004)
[25] Zhang, Y. Z.; Wang, Z. F., Finite element method of elasticity problem with different tension and compression moduli, Chinese J. Comput. Struct. Mech. Appl., 6, 236-245 (1989)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.