×

The ideal flip-through impact: Experimental and numerical investigation. (English) Zbl 1273.76059

Summary: Results from a physical experiment and a numerical computation are compared for a flip-through type wave impact on a vertical face, typical of a seawall or breakwater. The physical wave was generated by application of the focused-wave group technique to the amplitudes of a JONSWAP spectrum, with the focus location adjusted to produce a near-breaking wave impact with no discernible air entrainment or entrapment. Details of the resultant impact are presented in the form of high-speed video, pressure transducer and wave gauge records. Numerical reproduction of the wave transformation and impact is achieved by application of a linear wave-analysis model and a fully nonlinear potential-flow solver. Although more advanced models exist, use of the latter model type is interesting as (1) it was applied by M. J. Cooker and D. H. Peregrine [“Computation of a violent wave motion due to waves breaking against a wall”, in: Proceedings of the 22nd International Conference on Coastal Engineering, Delft, 1990. 164–176 (1990)] in their original numerical discovery of the flip-through impact and (2) the assumptions behind the potential-flow model remain reasonably valid, until the flip-through jet begins to break into droplets. In the present study, the potential-flow model has been extended with the Schwarz-Christoffel conformal mapping, to allow a piece-wise linearly shaped mound geometry. Further, an ad-hoc wave-generation technique has been added, to facilitate an adequate numerical reproduction of long second-order waves in the flume. Free-surface elevations from the potential-flow computations show good agreement with wave gauge data for the wave that produces the flip-through impact. Experimental video frames with the corresponding numerical free-surface profiles overlaid show an excellent match for the flow contraction prior to impact. The deviations between the experiment and numerical solution that occur at the stage of jet formation are discussed and a computation of a slightly weaker impact illustrate the strong sensitivity of impact pressures to the shape of the impacting wave. Ways of improving the numerical description by use of more advanced models are outlined.

MSC:

76B15 Water waves, gravity waves; dispersion and scattering, nonlinear interaction
76-05 Experimental work for problems pertaining to fluid mechanics

Software:

SCPACK
Full Text: DOI

References:

[1] Cooker MJ, Peregrine DH (1990) Computation of violent wave motion due to waves breaking against a wall. In: Proceedings of the 22nd International Conference on Coastal Engineering. ASCE, Delft, pp 164–176
[2] Bagnold RA (1939) Interim report on wave-pressure research. Proc Inst Civil Eng 12: 201–226
[3] Hattori M, Arami A, Yui T (1994) Wave impact pressure on vertical walls under breaking waves of various types. Coast Eng 22(1–2): 79–114 · doi:10.1016/0378-3839(94)90049-3
[4] Bullock GN, Obhrai C, Peregrine DH, Bredmose H (2007) Violent breaking wave impacts. Part 1: Results from large scale regular wave tests on vertical and sloping walls. Coast Eng 54(8): 602–617 · doi:10.1016/j.coastaleng.2006.12.002
[5] Bredmose H, Peregrine DH, Bullock GN (2009) Violent breaking wave impacts. Part 2: Modelling the effect of air. J Fluid Mech vol 641 · Zbl 1183.76628
[6] Cooker MJ, Peregrine DH (1991) Violent motion as near-breaking waves meet a vertical wall. In: Banner ML, Grimshaw RHJ (eds) Breaking waves. IUTAM symposium, Sydney, 1990, pp 291–297
[7] Cooker MJ, Peregrine DH (1992) Wave impact pressure and its effect upon bodies lying on the sea bed. Coast Eng 18(3–4): 205–229 · doi:10.1016/0378-3839(92)90020-U
[8] Peregrine DH (2003) Water wave impact on walls. Ann Rev Fluid Mech 35: 23–43 · Zbl 1039.76007 · doi:10.1146/annurev.fluid.35.101101.161153
[9] Chan ES, Melville WK (1988) Deep-water plunging wave pressures on a vertical plane wall. Proc R Soc Lond A 417: 95–131 · doi:10.1098/rspa.1988.0053
[10] Hull P, Müller G (2002) An investigation of breaker heights, shapes and pressures. Ocean Eng 29: 59–79 · doi:10.1016/S0029-8018(00)00075-5
[11] Lugni C, Brocchini M, Faltinsen OM (2006) Wave loads: the role of flip-through. Phys Fluids 18, 122101 · Zbl 1146.76475
[12] Colicchio G, Colagrossi A, Lugni C, Brocchini M, Faltinsen O (2007) Challenges on the numerical investigation of the flip-through. In: Proceedings of the 9th International Conference on Numerical Ship Hydrodynamics, pp 380–394
[13] Khayyer A, Gotoh H (2009) Modified moving particle semi-implicit methods for the prediction of 2D wave impact pressure. Coast Eng 56: 419–440 · doi:10.1016/j.coastaleng.2008.10.004
[14] Hunt A (2003) Extreme waves, overtopping and flooding at sea defences. Ph.D. thesis, Department of Engineering Science, University of Oxford
[15] Katsardi V, Swan C (2004) The evolution of large waves in shallow water. In: Proceedings of the 29th International Conference on Coastal Engineering, pp 69–81 · Zbl 1428.76038
[16] Hasselmann K, Barnett TP, Bouws E, Carlson H, Cartwright DE, Enke K, Ewing JA, Gienapp H, Hasselmann DE, Kruseman P, Meerburg A, Müller P, Olbers DJ, Richter K, Sell W, Walden H (1973) Measurements of wind-wave growth and swell decay during the Joint North Sea Wave Project (JONSWAP). Ergänzungsheft zur Deutchen Hydrographischen Zeitschrift A(8 o )(12). 95 pages.
[17] Goda Y, Suzuki Y (1976) Estimation of incident and reflected waves in random wave experiments. In: Proceedings of the 15th International Conference on Coastal Engineering, pp 828–845
[18] Mansard EP, Funke ER (1980) The measurement of incident and reflected spectra using a least squares method. In: Proceedings of the 17th International Conference on Coastal Engineering, pp 154–172
[19] Dean RG, Dalrymple RA (1991) Water Wave Mechanics for Engineers and Scientists. World Scientific, Philadelphia
[20] Dold JW, Peregrine DH (1986) An efficient boundary-integral method for steep unsteady water waves. In: Morton KW, Baines MJ (eds) Numerical Methods for Fluid Dynamics II. Oxford University Press, Oxford, pp 671–679
[21] Dold JW (1992) An efficient surface integral algorithm applied to unsteady gravity waves. J Comput Phys 103: 90–115 · Zbl 0816.76067 · doi:10.1016/0021-9991(92)90327-U
[22] Tanaka M, Dold JW, Lewy M, Peregrine DH (1987) Instability and breaking of a solitary wave. J Fluid Mech 135: 235–248 · Zbl 0633.76045 · doi:10.1017/S002211208700315X
[23] Cooker MJ, Vidal C, Dold JW, Peregrine DH (1990) The interaction between a solitary wave and a submerged semicircular cylinder. J Fluid Mech 215: 1–22 · Zbl 0698.76024 · doi:10.1017/S002211209000252X
[24] Cooker MJ (1990) The interaction between steep water waves and coastal structures. Ph.D. thesis, School of Mathematics, University of Bristol, UK
[25] Trefethen L (1980) Numerical computation of the Schwarz-Christoffel transformation. SIAM J Sci Stat Comput 1: 82–102 · Zbl 0451.30004 · doi:10.1137/0901004
[26] Schäffer HA, Steenberg CM (2003) Second-order wavemaker theory for multidirectional waves. Ocean Eng 30: 1203–1231 · doi:10.1016/S0029-8018(02)00100-2
[27] Hunt A, Taylor P, Borthwick A, Stansby P, Feng T (2004) Phase inversion and the identification of harmonic structure in Coastal Engineering experiments. In: Proceedings of the 29th International Conference on Coastal Engineering, Lisbon, pp 1047–1059
[28] Peregrine DH, Bredmose H, Bullock GN, Obhrai C, Müller G, Wolters G (2004) Water wave impact on walls and the role of air. In: Proceedings of the 29th International Conference on Coastal Engineering, Lisbon, pp 4005–4017
[29] Madsen PA, Bingham HB, Schäffer HA (2003) Boussinesq-type formulations for fully nonlinear and extremely dispersive water waves: Derivation and analysis. Proc R Soc Lond A 459(2033): 1075–1104 · Zbl 1041.76011 · doi:10.1098/rspa.2002.1067
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.