×

Considerations on shock wave/boundary layer interaction in undular hydraulic jumps in horizontal channels with a very high aspect ratio. (English) Zbl 1202.76084

Summary: It can be seen in the literature that the fundamental factors governing oblique shock wave development, typically in very large channels with straight sidewalls, have not yet been completely understood and remain at the level of indicating its presence and formation. In this study, in addition to an analysis of various properties of hydraulic jump behaviour in very large channels, some aspects of boundary layer development and its detachment from the channel lateral sidewall are also investigated. At the detachment point of the lateral shock waves, it was noted that the displacement thickness experiences a significant increase; this is accompanied by a significantly reduced gradient normal to the channel sidewalls of the flow velocity as well as the occurrence of a strong, sudden adverse pressure gradient. An analysis of the flow velocity distribution and the background turbulence intensity of both the streamwise and spanwise velocity components was also carried out. Furthermore, it is argued that the supersonic flow separation analogy with a supercritical free surface flow can be applied to this case study and that the behaviour of the supercritical flow during separation can be interpreted by the free interaction theory typically used in aerodynamics.

MSC:

76L05 Shock waves and blast waves in fluid mechanics
76-05 Experimental work for problems pertaining to fluid mechanics
Full Text: DOI

References:

[1] Chow, V. T., Open Channel Hydraulics (1959), McGraw-Hill Book Company: McGraw-Hill Book Company New York
[2] Ohtsu, I.; Yasuda, Y.; Gotoh, H., Flow conditions of undular hydraulic jumps in horizontal rectangular channels, J. Hydrau. Eng., 129, 12, 948-955 (2003)
[3] Chanson, H.; Montes, J. S., Characteristics of undular hydraulic jump: experimental apparatus and flow patterns, J. Hydrau. Eng., 121, 2, 129-144 (1995)
[4] M. Ben Meftah, F. De Serio, M. Mossa, A. Pollio, Undular jump formation in very large channel, in: Proceedings of IDRA 2006, Italian Conference of Hydraulics and Hydraulic Construction, Roma, 10-15 September, 2006.; M. Ben Meftah, F. De Serio, M. Mossa, A. Pollio, Undular jump formation in very large channel, in: Proceedings of IDRA 2006, Italian Conference of Hydraulics and Hydraulic Construction, Roma, 10-15 September, 2006.
[5] Ben Meftah, M.; De Serio, F.; Mossa, M.; Pollio, A., Analysis of the velocity field in a large rectangular channel with lateral shock wave, Environ. Fluid Mech., 7, 6, 519-536 (2007)
[6] Ben Meftah, M.; De Serio, F.; Mossa, M.; Pollio, A., Experimental study of recirculating flows generated by lateral shock waves in very large channels, Environ. Fluid Mech., 8, 6, 215-238 (2008)
[7] Reinauer, R.; Hager, W. H., Non-breaking undular hydraulic jumps, J. Hydrau. Res., 33, 5, 1-16 (1995)
[8] Chanson, H., Non-breaking undular hydraulic jump — discussion, J. Hydrau.s Res., IAHR, 34, 2, 279-287 (1996)
[9] I. Ohtsu, Y. Yasuda, H. Gotoh, Characteristics of undular jump in rectangular channels, in: Proc., XXVI Int. Association for Hydraulic Research Congress, London, 1C14, 1995, pp. 450-455.; I. Ohtsu, Y. Yasuda, H. Gotoh, Characteristics of undular jump in rectangular channels, in: Proc., XXVI Int. Association for Hydraulic Research Congress, London, 1C14, 1995, pp. 450-455.
[10] Ohtsu, I.; Yasuda, Y.; Gotoh, H., Hydraulic condition for undular-jump formations, J. Hydrau. Res., 39, 2, 203-209 (2001)
[11] Mossa, M.; Tolve, U., Flow visualization in bubbly two-phase hydraulic jump, Trans. ASME, 120, 1 (1998)
[12] Mossa, M., On the oscillating characteristics of hydraulic jump, J. Hydrau. Res., 37, 4, 541-558 (1999)
[13] J.S. Montes, A Study of the undular jump profile, in: Proc. 9th Australasian Fluid Mechanics Conference AFMC, Auckland, New Zealand, 1986, pp. 148-151.; J.S. Montes, A Study of the undular jump profile, in: Proc. 9th Australasian Fluid Mechanics Conference AFMC, Auckland, New Zealand, 1986, pp. 148-151.
[14] Reinauer, R.; Hager, W. H., Shock wave in air-water flows, J. Multiphase Flow, 22, 6, 1255-1263 (1996) · Zbl 1135.76528
[15] D. Arnal, J. Délery, Laminar-turbulent transition and shock wave/boundary layer interction, Paper presented at the RTO AVT Lecture Series on Critical Technologies for Hypersonic Vehicle Development, held at the von Kàrmàn Institute, Rhode-St-Genèse, Belgium, 10-14 May, 2004, and published in RTO-EN-AVT-116, 2004.; D. Arnal, J. Délery, Laminar-turbulent transition and shock wave/boundary layer interction, Paper presented at the RTO AVT Lecture Series on Critical Technologies for Hypersonic Vehicle Development, held at the von Kàrmàn Institute, Rhode-St-Genèse, Belgium, 10-14 May, 2004, and published in RTO-EN-AVT-116, 2004.
[16] Schlichting, H., Boundary Layer Theory (1979), McGraw-Hill: McGraw-Hill New York · Zbl 0434.76027
[17] D.R. Chapman, D.M. Kuehn, H.K. Larson, Investigation of separated flows in supersonic and subsonic streams with emphasis on the effect of transition, NACA Tech. Note 3867, 1957, pp. 419-460.; D.R. Chapman, D.M. Kuehn, H.K. Larson, Investigation of separated flows in supersonic and subsonic streams with emphasis on the effect of transition, NACA Tech. Note 3867, 1957, pp. 419-460.
[18] Lighthill, M. J., On boundary layers and upstream influence. II. Supersonic flows without separation, Proc. R. Soc. Lond. A, 217, 478-507 (1953) · Zbl 0053.14702
[19] Cassel, K. W.; Ruban, A. I.; Walker, J. D.A., An instability in supersonic boundary layer flow over a compression ramp, J. Fluid Mech., 300, 265-285 (1995) · Zbl 0848.76020
[20] Chanson, H., The Hydraulic Open Channel Flow: An Introduction (1999), Edward Arnold: Edward Arnold London
[21] Liggett, J. A., Fluid Mechanics (1994), McGraw-Hill: McGraw-Hill New York, USA
[22] Shultz-Grunow, F., Neues Widerstand fur glatte Platten, Luftfahrtfforschung, 17, 239-246 (1940), (in German) · JFM 66.1074.01
[23] Nikuradse, J., Turbulente reibungsschichten and der platte (1942), ZWB. R. Oldenbourg: ZWB. R. Oldenbourg Munchen, Berlin, (in German) · JFM 68.0580.01
[24] Ippen, A. T., Mechanics of supercritical flow, Trans. ASCE, 116, 268-295 (1951)
[25] Chanson, H., Current knowledge in hydraulic jumps and related phenomena. A survey of experimental results, Eur. J. Mech. B Fluids, 28, 191-210 (2009) · Zbl 1156.76308
[26] F. Engelund, J. Munch-Petersen, Steady flow in contracted and expanded rectangular channels, Some considerations concerning the shape of the water surface, Jl La Houille Blanche, Aug./Sept., 1953, pp. 464-474.; F. Engelund, J. Munch-Petersen, Steady flow in contracted and expanded rectangular channels, Some considerations concerning the shape of the water surface, Jl La Houille Blanche, Aug./Sept., 1953, pp. 464-474.
[27] Nebbia, G., Su taluni fenomeni alternativi in correnti libere, L’Energia Elettrica, XIX, 1-10 (1942), (in Italian)
[28] Long, D.; Rajaratnam, N.; Steffler, P. M.; Smy, P. R., Structure of flow in hydraulic jumps, J. Hydrau. Res., IAHR, 29, 2, 207-218 (1991)
[29] Chanson, H.; Brattberg, T., Experimental study of the air-water shear flow in a hydraulic jump, Internat. J. Multiphase Flow, 26, 583-607 (2000) · Zbl 1137.76546
[30] Kucukali, S.; Chanson, H., Turbulence measurements in the bubbly flow region of hydraulic jumps, Exper. Thermal Fluid Sci., 32, 41-53 (2008)
[31] Carling, P. A., Flow-separation berms downstream of a hydraulic jump in a bedrock channel, Geomorphology, 11, 245-253 (1995)
[32] Blinco, P. H.; Partheniades, E., Turbulence characteristics in free surface flows over smooth and rough boundaries, J. Hydrau. Res., 9, 1, 43-71 (1971)
[33] J. Laufer, Investigation of turbulent flow in a two-dimensional channel, NACA, Report 1053, 1951, pp. 1247-1266.; J. Laufer, Investigation of turbulent flow in a two-dimensional channel, NACA, Report 1053, 1951, pp. 1247-1266.
[34] Montes, J. S.; Chanson, H., Characteristics of undular hydraulic jump: experiments and analysis, J. Hydrau. Eng., 124, 2 (1998)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.