×

Ledinegg instability in microchannels. (English) Zbl 1177.80071

Summary: The static Ledinegg instability in horizontal microchannels under different flow conditions and fluids pertinent to electronics cooling was studied experimentally and numerically. Two fluids, water at sub-atmospheric pressures and refrigerant HFE-7100, were examined for a range of heat fluxes, mass fluxes, and channel hydraulic diameters. Numerical predictions from the developed pressure gradient model agree well with results from the flow boiling experiments. The model was used to quantify the susceptibility of the system to the Ledinegg instability. A parametric instability study was systematically conducted with varying system pressure, heat flux, inlet subcooling, and channel size with and without inlet restrictor. Increasing system pressure and channel diameter, reducing parallel channel number and channel length, and including an inlet restrictor can enhance the flow stability in microchannels.

MSC:

80A20 Heat and mass transfer, heat flow (MSC2010)
80A22 Stefan problems, phase changes, etc.
80-05 Experimental work for problems pertaining to classical thermodynamics
76T10 Liquid-gas two-phase flows, bubbly flows
76E05 Parallel shear flows in hydrodynamic stability
Full Text: DOI

References:

[1] Kakac, S.; Bon, B.: A review of two-phase flow dynamic instabilities in tube boiling systems, Int. J. Heat mass transfer 51, 399-433 (2008) · Zbl 1133.76050 · doi:10.1016/j.ijheatmasstransfer.2007.09.026
[2] Ozawa, M.; Umekawa, H.; Mishima, K.; Hibiki, T.; Saito, Y.: CHF in oscillatory flow boiling channels, Inst. chem. Eng. symp. Ser. 79, 389-401 (2001)
[3] R.S. Daleas, A.E. Bergles, Effects of upstream compressibility on subcooled critical heat flux, ASME Paper No. 65-HT 67, ASME, New York, 1965.
[4] J.S. Maulbetsch, P. Griffith, A study of system-induced instabilities in forced-convection flows with subcooled boiling, MIT Engineering Projects Lab Report No. 5382-35, 1966.
[5] Wu, H. Y.; Cheng, P.: Visualization and measurements of periodic boiling in silicon microchannels, Int. J. Heat mass transfer 46, No. 17, 2603-2614 (2003)
[6] Wu, H. Y.; Cheng, P.: Boiling instability in parallel silicon microchannels at different heat flux, Int. J. Heat mass transfer 47, 3631-3641 (2004)
[7] Bergles, A. E.; Kandlikar, S. G.: On the nature of critical heat flux in microchannels, J. heat transfer 127, 101-107 (2005)
[8] Jiang, L.; Wong, M.; Zohar, Y.: Phase change in microchannel heat sinks with integrated temperature sensors, J. microelectromech. Syst. 8, No. 4, 358-365 (1999)
[9] Zhang, L.; Wang, E. N.; Goodson, K. E.; Kenny, T. W.: Phase change phenomena in silicon microchannels, Int. J. Heat mass transfer 40, No. 8, 1572-1582 (2005)
[10] Koşar, A.; Kuo, C. -J.; Peles, Y.: Boiling heat transfer in rectangular microchannels with reentrant cavities, Int. J. Heat mass transfer 48, No. 23, 4867-4886 (2005)
[11] Koşar, A.; Kuo, C. -J.; Peles, Y.: Suppression of boiling flow oscillations in parallel microchannels with inlet restrictors, J. heat transfer 128, No. 3, 251-260 (2006)
[12] Steinke, M. E.; Kandlikar, S. G.: An experimental investigation of flow boiling characteristics of water in parallel microchannels, J. heat transfer 126, No. 4, 518-526 (2004)
[13] Kuo, C. -J.; Peles, Y.: Flow boiling instabilities in microchannels and means for mitigation by reentrant cavities, J. heat transfer 130, No. 7, 072402 (2008)
[14] Kuo, C. -J.; Peles, Y.: Pressure effects on flow boiling instabilities in parallel microchannels, Int. J. Heat mass transfer 52, No. 1-2, 271-280 (2009)
[15] Bouré, J. A.; Bergles, A. E.; Tong, L. S.: Review of two-phase flow instability, Nucl. eng. Des. 25, 165-192 (1973)
[16] Kennedy, J. E.; Roach, G. M.; Dowling, M. F.; Abdel-Khalik, S. I.; Ghiaasiaan, S. M.; Jeter, S. S.; Quershi, Z. H.: The onset of flow instability in uniformly heated horizontal microchannels, ASME J. Heat transfer 122, No. 1, 118-125 (2000)
[17] Prasher, R. S.; Dirner, J.; Chang, J. -Y.; Myers, A.; Chau, D.; He, D.; Prstic, S.: Nusselt number and friction factor of staggered arrays of low aspect ratio micro pin fins under cross flow for water as fluid, ASME J. Heat transfer 129, No. 1, 141-153 (2007)
[18] 3M™ Novec™ Engineered Fluid HFE-7100.
[19] Bejan, A.; Kraus, A. D.: Heat transfer handbook, ch. 5 forced convection: internal flows by A. Bejan; ch. 9 boiling by J.R. Thome, (2003)
[20] Lockhart, R. W.; Martinelli, R. C.: Proposed correlation of data for isothermal two-phase, two-component flow in pipes, Chem. eng. Prog. 45, No. 1, 39-45 (1949)
[21] Kawahara, A.; Chung, P. M. -Y.; Kawaji, M.: Investigation of two phase flow pattern, void fraction and pressure drop in a microchannel, Int. J. Multiphase flow 28, 1411-1435 (2002) · Zbl 1137.76630 · doi:10.1016/S0301-9322(02)00037-X
[22] Chung, P. M. -Y.; Kawaji, M.: The effect of channel diameter on adiabatic two-phase flow characteristics in microchannels, Int. J. Multiphase flow 30, 735-761 (2004) · Zbl 1136.76486 · doi:10.1016/j.ijmultiphaseflow.2004.05.002
[23] Kawaji, M.; Chung, P. M. Y.: Adiabatic gas – liquid flow in microchannels, Microscale thermophys. Eng. 8, 239-257 (2004)
[24] Kandlikar, S.; Garimella, S.; Li, D.; Colin, S.; King, M. R.: Heat transfer and fluid flow in minichannels and microchannels, (2005)
[25] Collier, J. G.; Thome, J. R.: Convective boiling and condensation, (1996)
[26] Carey, V. P.: Liquid – vapor phase-change phenomena: an introduction to the thermophysics of vaporization and condensation processes in heat transfer equipment, (2008)
[27] R.D. Flynn, D.W. Fogg, J.-M. Koo, et al., Boiling flow interaction between two parallel microchannels, ASME paper IMECE2006-14696, 2006.
[28] Stelling, R.; Mcassey, E. V.; Dougherty, T.: The onset of flow instability for downward flow in vertical channels, ASME J. Heat transfer 118, No. 3, 709-714 (1996)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.