Abstract
Compounds with incommensurate structural modulations have been extensively studied in last several decades. However, the relationship between structurally incommensurate/commensurate phases and associated electronic states remains enigmatic. Here we report the coexisting of complex incommensurate structures and highly unusual electronic roughness on the surface of in situ cleaved IrTe2 by using scanning tunnelling microscopy/spectroscopy, corroborated with extensive density-functional theory calculations. This behaviour is traced to structural instability, which induces a structural transition from a trigonal to a triclinic lattice below transition temperature, giving rise to the formation of unidirectional structural modulations with distinct wavelengths, accompanied by the opening of a ‘pseudo’-gap in the surface layer. With further cooling the surface adopts a structure that reflects an ~6 × periodicity that is different from the bulk 5 × periodicity. Calculations show that the structure distortion is not associated with a charge density wave, but is rather associated with Te p-electron bonding.
Similar content being viewed by others
Introduction
Competition between ground states often leads to the realization of new states with properties that cannot be readily anticipated from those of the original states. One example is the Frenkel–Kontorova model (chain of atoms on a simple periodic substrate), where a competition between two periodicities leads to an exceedingly complex structural evolution, including solitons, and a devils staircase1. In this case a simple uniform Hamiltonian leads to ground states that are highly inhomogeneous on all length scales. Structural competition and modulations are also of importance in technological materials ranging from superconductors near density waves to piezoelectric morphotropic phase boundary systems.
In bulk systems, coupling of a frustrated structural instability of a metal to the electronic structure can lead to remarkably subtle ground states, as exemplified by the Verwey metal-insulator transition of Fe3O4 where solution of the low-temperature structure has attracted long-standing interest but was only recently elucidated2. The case of frustration between bulk and surface structural transitions in materials with interesting electronic coupling is less studied, but may be more amenable to detailed investigation since the exposed surface allows direct probing of the interplay of spatial inhomogeneity and electronic structure particularly using scanning probes. In fact, spatially resolved studies are particularly useful for such systems due to the central role of inhomogeneity in these emergent states.
We focus on the 5d transition metal ditelluride IrTe2 using a combination of scanning tunnelling microscopy, which provides local structural information, and spectroscopy, which provides local electronic information. We show that this system does exhibit a complex surface structure on extended length scales, incommensurate with the bulk structure, and that this leads to a spatially inhomogeneous electronic reconstruction.
IrTe2 at above Ts~270 K is a metal with a high-symmetry layered trigonal structure. As it is cooled through Ts it undergoes a metal–metal transition to a complex reconstructed 5 × 1 × 5 structure3. This material, when stabilized by alloying or intercalation, is superconducting4,5, suggesting substantial electron–phonon coupling. In the high-temperature trigonal phase (HT), the Ir ions form an equilateral-triangular lattice in the ab plane with edge-sharing IrTe6 octahedra forming layers stacked along the c axis (see Supplementary Fig. 1a). The low-temperature triclinic phase (LT) of IrTe2 has strong aspect of a unidirectional modulated superstructure and also involves rebonding of Te atoms between layers. While the phase transition was initially discussed as a density wave5, more recent studies, including our first-principles calculations discussed below, show that it is not a charge density wave (CDW) but is instead a consequence of competition between Te–Ir, covalent/ionic and Te–Te covalent p-electron bonding6,7,8,9. Both the HT and LT phases of IrTe2 show significant three-dimensional electronic structures reflecting interactions (and in the case of the LT phase, bonding) between adjacent CdI2 structure layers, which is very different from most layered dichalcogenides, which are generally more two dimensional and show real CDW instabilities10. Several scanning tunnelling microscope (STM) studies11,12 have been reported recently on IrTe2, but the relationship between the structural and electronic properties remains to be fully elucidated. In any case, the fact that the transition is associated with Te–Te bonding with interlayer bonds suggests that the surface may favour a different pattern than the bulk leading to a competition. Moreover, a change of the modulation from 1/5 to 1/6 is observed by Se doping9 or the further cooling12, both suggesting that the intrinsic ground state of IrTe2 is a 1/6 modulation.
Here we report observation of coexisting complex incommensurate structures, presumably due to bond competition, based on atomic-resolved imaging of nanophase domains. The structural transition, which is mainly a distortion of the Te sublattice in this compound, produces multiple structural modulations on surface, inducing a strong reconstruction of Te p bands. We find this to be associated with enhanced electronic roughness in these coexisting structures. Although the bulk transition is strongly first order, we find that the electronic roughness at the surface is significantly temperature dependent and vanishes in the LT phase when the temperature is close to the critical temperature. Specifically, the surface electronic structure is characterized by a position-dependent partial gapping. As the critical temperature is approached with cooling, this electronic roughness vanishes and the partial gap further develops into a more complete gap. Accompanied with the full gap formation at 4.2 K, the incommensurate modulation at 77 K changes to a homogeneous commensurate 1/6 modulation, suggesting that the intrinsic ground state of IrTe2 is a 1/6 modulation. We also report density-functional theory (DFT) calculations, showing that the structural modulations are not induced by Fermi surface nesting, suggesting that the interplay between structure instability and electronic structure reconstruction does lead to electronic inhomogeneity in this system consistent with the observations.
Results
STM study of an incommensurate LT phase of IrTe2 surface
Unidirectional superlattice/modulations are clearly seen in our STM topographic images taken at 77 K (Fig. 1a). The images show the multiple unidirectional modulations with distinct wavelengths. In addition to the unidirectional modulations, some one-dimensional deep trenches, run parallel to each other across the surface as seen in the zoomed-in atomically resolved image (Fig. 1b). We performed two-dimensional Fourier analysis of the atomically resolved STM images to characterize these patterns. The Fourier transform of Fig. 1b (in Fig. 1c) reveals a series of fractional spots along the b′ direction in reciprocal space, implying the existence of multiple modulations instead of the regular hexagonal lattice (atomic lattice marked by blue circles) or a modulated structure derived directly from the bulk. To better visualize the fractional spots, we enlarge the central reciprocal area and show modulation spots in the bottom panel. The measured periodicities λ1Q of modulations, are about 2.75 a0, 4.22 a0, 7.58 a0 and 9.26 a0, corresponding to q1Q~0.364 Q0, 0.237 Q0, 0.132 Q0 and 0.108 Q0, respectively, where Q0 is the Bragg vector. Here, a0 represents the Te–Te atomic distance along the nonmodulated direction (b axis), which is equal to 3.82 Å at 77 K. (see Supplementary Fig. 2). We label these incommensurate modulations, respectively, as q1, q2, q3 and q4 for simplicity. We enlarge three areas (marked as red rectangles in Fig. 1b) and exhibit high-resolution (HR) images in three panels in Fig. 1d for superlattices of q1, q3 and q4. The unit cells (UCs)of these incommensurate modulations are highlighted by blue parallelograms in each panel. Take 7.58 a0 modulation for example, although the periodicity is 7.58 a0, each UC involves eight atomic rows, giving rise to an ‘8 times’-like modulation in the STM images12. As a consequence, the mean distance between rows at 77 K is about 0.95 a0, smaller than that value along the direction of the b axis (see Supplementary Fig. 2 and Note 1 for details). By using one-dimensional fast fourier transform phase analysis, coexisting incommensurate domain structures are illustrated based on the phase profile plot in Supplementary Figs 3 and 4 (see Supplementary Note 2 for details).
To get an insight into the electronic structure associated with these incommensurate domains, we further study the energy dependence of these modulated structures. The standard variation roughness analysis was performed with a set of different sample biases, shown in Supplementary Figs 5 and 6. The analysis has clearly demonstrated that there is a strong energy dependence of the surface roughness, which implies that an electronic inhomogeneity may be associated with these incommensurate modulated structures (see Supplementary Note 3 for details). Focusing on a region with q3 modulation, Fig. 2a shows an atomic-resolved STM image at −0.2 V. A repeated surface UC is defined along the a axis. To illustrate the inner structure of the UC, we zoom into a small area with the size of 4 × 4 nm. Imaging at both positive and negative sample biases will help to elucidate the spatial electronic contribution from structural topography. By placing two constant-current images taken at +0.2 V (Fig. 2b) and −0.2 V (Fig. 2c), we are able to obtain insight into the atomic structure and electronic modulation in a single surface UC. For a better picture of the electronic spatial variation, a spectroscopic survey was taken, consisting of 25 differential tunnelling conductance spectra (dI/dV versus V) measurements.
Figure 2d shows the dI/dV spectra acquired within one UC (marked by a blue line in Fig. 2a), all exhibit similar asymmetric line shapes. However, suppression around the Fermi level (EF) gradually develops into a ‘pseudo’-gap feature (shading by red colour in Fig. 2d), while the rest of the dI/dV curves exhibit a ‘bump’ at EF in density of states (DOS). Such gap-like features only open periodically at the location corresponding to ‘bright’ atomic rows, shaded by pink stripes in Fig. 2a. The suppression around EF in DOS of IrTe2 was also observed in PES measurements by Ootsuki et al.8, explained by band narrowing due to a kind of band Jahn–Teller effect caused by bond compression. Such a ‘pseudo’-gap opening gives rise to a strong electronic roughness overlapped on these incommensurate structures, which is consistent with the energy-dependent roughness analysis. Although CDW usually accompanies with an energy gap in the single-particle excitation spectrum near the Fermi level13, the size of the observed ‘pseudo’-gap is around 0.3 eV, 10 times larger than the CDW gap observed in other transition metal dichalcogenides. Using the theory of CDW transition, it has been predicted that the ratio of the CDW gap Δ at T=0 is 2Δ/kBTCDW≈3.52 (refs 14, 15). In traditional CDW material NbSe2, an anomalously large energy gap for the corresponding TCDW~33 K is about 35 meV (ref. 16), however, recent ARPES studies further indicate a much smaller CDW gap, only 3~5 mV (refs 17, 18). In addition, CDW gaps are usually spatially homogeneous, which is quite different from the observed 'pseudo'-gap. As a consequence, in any case, as discussed below, the partial gap we observed in the present case is not a CDW gap.
DFT investigation of the LT phase
We used first-principles calculations to study the surface electronic structure in the distorted low-temperature phase. This was done to establish what a bulk termination with the bulk periodicity would produce. The calculations were performed similar to the work on bulk IrTe2. The structural investigation19 revealed that the in-plane structural distortion below the phase transition causes the Te–Te bond length along the modulation direction to reduce from 3.92 to 3.75 Å for every four adjacent Te atoms. This is followed by a pair of Te rows with large Te–Te bond lengths up to 4.2 Å, therefore forming a (1/5, 0, 1/5) structural modulation. The change of Te–Te bond length along other orientations in the Te layers is trivial (from 3.928 to 3.934 Å and 3.812 Å), leading to a triclinic structure. This low-temperature structure has been used as the initial relaxation structure in our DFT calculations to calculate the surface structure. The structural model was obtained by total energy minimization. We start by constructing a five-IrTe2 layer slab by taking the bulk LT structure, then we break it between UCs with a 12.5 Bohr (6.615 Å) vacuum. The in-plane layers of the cell are a 5 × 1 superstructure of the HT CdI2 type structure. We then fully relax all atomic positions within the resulting 75-atom triclinic cell. The resulting structure is depicted in Fig. 3a (side view) and Fig. 3b (top view). This structure has triclinic P1 symmetry with different top and bottom surfaces. We also find, however, that from an electronic structure point of view they are almost identical, and so in the following we discuss them together and present the average densities of states of the two practically identical surfaces.
Figure 3c gives the projections of the electronic DOS onto the different layers and atoms in the slab. The surface layer Ir d DOS is very similar to the bulk, showing little involvement of the Ir in the rebonding on the surface. The Te p DOS at the surface is, however, substantially modified from the bulk. This emphasizes the importance of Te–Te bonding in the LT phase. The outer surface layer, which faces the vacuum, is most strongly modified. The most prominent change is a narrowing of the DOS, which is seen clearly at binding energies between 4 and 7 eV below the Fermi level, EF, where the surface DOS is depleted near 6 eV binding and enhanced near 4 eV. At the lower-energy range, the outer surface Te DOS is enhanced below EF, but is similar to the bulk above EF, while the inner surface layer Te (Te Si, in Fig. 3c) is depleted in the first 1 eV above EF. These changes give a shape that has a more flattened shape in the bottom of the gap in the DOS than the bulk. This leads to a shape that is qualitatively close to experiment, but with a major difference, specifically a gap opening around EF. This is for the average over all the surface atoms.
Supplementary Fig. 7 gives the calculated band structure for the low-temperature surface layer. The band structure becomes anisotropic between directions along the modulation (X-Γ) and perpendicular to it (Γ-Y), although band structures in both directions are metallic in the sense of Fermi level crossings. When compared with the HT calculation, which has two bands crossing the Fermi level, contributions are dominantly from the largely filled Te 5px+5py orbitals and Te 5pz orbital. These two Te p orbitals along the modulation direction (X-Γ) are pushed away from EF and forming a ‘pseudo’-gap-like suppression of DOS around Fermi level, consistent with our experimental results. Our data show a partial gap opening at 77 K. More interestingly, local electronic structure is strongly spatially dependent. We plot projected DOS of different Te atomic rows within a surface UC (labelled with numbers, as shown in panel b) in Fig. 3d. From atom row ‘1’ to ‘5’, the energy and shape of the gap-like feature in DOS depends largely on the lateral position. When correlated with Te–Te distance, we find the shortest Te–Te distance gives a more prominent gap feature with energy moving closer to the Fermi level.
Therefore, the origination of the gap opening in scanning tunneling spectroscopy (STS) can be understood based on these calculations. There is no Fermi surface nesting related CDW instability. Instead the transition at 270 K, which results in the structural distortion at low temperatures, is associated with a Te bonding reorganization, that is, formation of Te–Te bonds. This greatly affects the electronic structure of IrTe2 by moving the Te p bands away from Fermi level and also modifies the electronic structure away from the Fermi energy. Shortening of Te–Te bonding distance along one direction reduces the crystallographic symmetry, increasing the overlap of Te p orbitals. We note that the in-plane Ir–Ir and Te–Te interactions have been previously suggested to be important for the structural transition20,21,22. In fact, once the in-plane Ir–Ir and Te–Te interactions are enhanced, as in IrTe2−xSex (ref. 9), the low-temperature triclinic phase is experimentally found to be stabilized to higher temperatures and modulations change from 1/5 to 1/6. This is consistent with a transition driven by p-electron bonding of the Te atoms, which is what the electronic structure calculations indicate.
STM/S studies of the commensurate phase at 4.2 K
Generally, a periodic structure can gain ‘umklapp’ energy by locking into phases that are commensurate with the lattice, that is, the wave vector is a rational fraction of the reciprocal lattice vectors23,24,25. This may be the case when the distortions are large as they are in the LT phase of IrTe2. Specifically, the wave vector will tend to lock onto every single commensurate value it passes when the temperature is close enough to the critical temperature, TC. Therefore, studying this parent near the critical temperature becomes interesting. Figure 4a is the atomically resolved STM image taken at 4.2 K for same IrTe2 surface. A novel unidirectional modulated structure forms on the surface, which is very different from what we observed at 77 K. Fourier transform of the image (Fig. 4b) shows a primary hexagonal structure, decorated with a series of fractional spots reflecting a superlattice with a periodicity of six times the Te distance. The incommensurate structural modulations observed at 77 K disappear and a commensurate modulation with wave vector of q=0.167 Q0 emerges at 4.2 K. A UC can be easily assigned based on our HR image (marked as a blue parallelogram in Fig. 4a). The periodicity of one UC consists of six Te atoms in the a axis and one Te in b axis, namely 6 × 1 superlattice.
Discussion
Our HR images turned out that the intrinsic ground state of the IrTe2 surface is a commensurate 1/6-modulated phase. Indeed, such 1/6 modulation has been reported by atomically resolved STM images of IrTe2 acquired at 50 K (ref. 12) and the HR-transmission electron microscopy images of the Se-doped IrTe2 (ref. 9). According to our DFT calculation, shortest Te–Te distance gives a more prominent gap feature with energy moving closer to the Fermi level. Considering that the 1/6 modulation origins from the periodic dimerization of Te atoms12, one can expect distinct DOS changes over the surface. We show a typical tunnelling spectrum taken at 4.2 K on this surface in Fig. 4c. A full gap of about 0.3 V is clearly resolved from the spectrum. Again, our experimental results are an order of magnitude larger than the CDW prediction. Clearly, CDW instability in the standard weak coupling theory is not reasonable in view of the order-of-magnitude discrepancy of gap energy26. It is also inconsistent with the first-order nature of the phase transition and with previously reported phonon calculations for the HT phase showing no soft mode. The gap seen at 4.2 K is fully developed rather than the partial-opened gap at 77 K. This phenomena, is seen over the whole surface, as shown in the line spectra survey of Fig. 4d. Our microscopic/spectroscopic measurements suggest a commensurate, modulated structure with a fully gapped insulating phase formed on the surface via the periodic Te–Te dimerization12. Meanwhile, bulk IrTe2 at this temperature is still metallic. Here, the uniqueness of this system is that a particular system with coexisting several morphotropic incommensurate phases, finally condenses into a commensurate phase with forming an electronic gapped state, occurring only at the critical temperature. The entire phase evolution can be depicted as a simple schematic phase diagram sketch shown in Fig. 4e. Below the transition temperature (~270 K), the layered trigonal structure of IrTe2 crystal undergoes a structural transition and the surface exhibits incommensurate structural modulations. The rebonding of the Te atoms at this temperature results into opening periodically a ‘pseudo’-gap over the surface. Upon further cooling, the IrTe2 shows its intrinsic ground state: the 1/6 commensurate structural modulation. In this case, the distance of Te–Te is further shortened and the periodic dimerization of Te atoms results in a homogeneous full-gap opening all over the surface12.
To conclude, high-resolution STM images of IrTe2 show that the surface consists of various coexisting incommensurate phases at 80 K. A partially opened ‘pseudo’-gap state associated with these incommensurate phases gives an unusual energy-dependent, electronic roughing for modulated phases. Such incommensurate phases finally undergo a phase transition to ground state commensurate 1/6 structural modulation at 4.2 K on the surface. Scanning tunnelling spectroscopy reveals a partially opened gap state transiting into a fully developed gap of 0.3 eV simultaneously. DFT calculations of the electronic band structure confirm that the gap formation originates from the low-temperature deformation of the lattice and Te–Te bonding. Overall, the connection between spatially organized patterns and the ‘pseudo’-gap, the transition of incommensurate to commensurate modulations reported here supports the theme that complex phenomena in 5d ditelluride IrTe2 is a result of an interplay or competition between various types of frustrated bond ordering, structural instability and criticality. Our results provide important information for understanding the nature of the phase transition in IrTe2. Finally, microscopic visualization of the role of structural distortion in stabilizing new order may lead to new directions for engineering quantum phases in correlated materials.
Methods
Synthesis of IrTe2 crystals
Single crystals of IrTe2 are grown via self-flux technique. Millimetre plate-like crystals were characterized by measuring magnetic properties, electrical transport and specific heat. A first order structural transition was observed at 285 K. Crystals from the same batch were used for single-crystal X-ray and neutron diffraction studies.
STM measurements
For the STM/S measurements, a laboratory-built low-temperature STM was used for the imaging and spectroscopic measurements. The sample was cleaved at room temperature in ultra-high vacuum to expose a shining surface and then loaded into the STM head for investigation at about 77 and 4.2 K, respectively. We obtained topographic images in constant-current mode, and the tunnelling spectra dI/dV using a lock-in technique to measure differential conductance. The bias voltage was applied on the sample during the STM observations. The WSxM software has been used to process and analyse STM data.27
DFT calculation
DFT calculation is conducted using the generalized gradient approximation of Perdew, Burke and Ernzerhof28. We used the general potential linearized augmented planewave method29 as implemented in the WIEN2k code30 for calculations of the electronic structure and for structure relaxation. We well converged basis sets consisting of standard Linearized Augmented Planewave (LAPW) functions up to a cutoff RKmax=9, where Kmax is the planewave sector cutoff and R is the minimum LAPW sphere radius; the sphere radii were 2.25 Bohr for Ir and 2.50 Bohr for Te. In addition, local orbitals were added for the Ir 5p and Te 4d semicore states. Relativity was included at the Dirac level for the core states and in a scalar relativistic approximation for the valence states in the structure relaxation. Once the relaxation was done, spin orbit was included in the calculation of the electronic structures.
Additional information
How to cite this article: Li, Q. et al. Bond competition and phase evolution on the IrTe2 surface. Nat. Commun. 5:5358 doi: 10.1038/ncomms6358 (2014).
References
Aubry, S. & Le Daeron, P. Y. The discrete Frenkel-Konorova model and its extensions 1. Exact results for the ground-states. Physica D 8, 381–422 (1983).
Senn, M. S., Wright, J. P. & Attfield, J. P. Charge order and three-site distortions in the Verwey structure of magnetite. Nature 481, 173–176 (2012).
Matsumoto, N., Taniguchi, K., Endoh, R., Takano, H. & Nagata, S. Resistance and susceptibility anomalies in IrTe2 and CuIr2Te4 . J. Low Temp. Phys. 117, 1129 (1999).
Pyon, S., Kudo, K. & Nohara, M. Superconductivity induced by bond breaking in the triangular lattice of IrTe2 . J. Phys. Soc. Jpn 81, 053701 (2012).
Yang, J. J. et al. Charge-orbital density wave and superconductivity in the strong spin-orbit coupled IrTe2:Pd. Phys. Rev. Lett. 108, 116402 (2012).
Fang, A. F., Xu, G., Dong, T. & Wang, N. L. Structral phase transition in IrTe2: a combined study of optical spectroscopy and band structure calculations. Sci. Rep. 3, 1153 (2013).
Pascut, G. L. et al. Dimerization-induced cross-layer quasi-two-dimensionality in metallic IrTe2 . Phys. Rev. Lett. 112, 086402 (2012).
Ootsuki, D. et al. Orbital degeneracy and Peierls instability in the triangular-lattice superconductor Ir1−xPtxTe2 . Phys. Rev. B 86, 014519 (2012).
Oh, Y. S., Yang, J. J., Horibe, Y. & Cheong, S. W. Anionic depolymerization transition in IrTe2 . Phys. Rev. Lett. 110, 127209 (2013).
Wilson, J. A., DiSalvo, F. J. & Mahajan, S. Charge-density waves and superlattices in metallic layered transition-metal dichalcogenides. Adv. Phys. 24, 117–201 (1975).
Machida, T. et al. Visualizing the effect of the structural supermodulation on the electronic structure in IrTe2 by scanning tunneling spectroscopy. Phys. Rev. B 88, 245125 (2013).
Hsu, P. J. et al. Hysteretic melting transition of a soliton lattice in a commensurate charge modulation. Phys. Rev. Lett. 111, 266401 (2013).
Grüner, G. Density Waves in Solids Addison-Wesley (1994).
Peierls, R. E. Quantum Theory of Solids Clarendon (1955).
Fröhlich, A. On the theory of superconductivity: the one-dimensional case. Proc. Roy. Soc. London Ser. A 223, 296 (1954).
Hess, H. F., Robinson, R. B. & Waszczak, J. V. STM spectroscopy of vortex cores and the flux lattice. Physica B 169, 422–431 (1991).
Borisenko, S. V. et al. Two energy gaps and Fermi-surface ‘arcs’ in NbSe2 . Phys. Rev. Lett. 102, 166402 (2009).
Rahn, D. J. et al. Gaps and kinks in the electronic structure of the superconductor 2H-NbSe2 from angle-resolved photoemission at 1 K. Phys. Rev. B 85, 224532 (2012).
Cao, H. B. et al. Origin of the phase transition in IrTe2: structural modulation and local bonding instability. Phys. Rev. B 88, 115122 (2013).
Yan, J. Q. et al. Absence of structural transition in M0.5IrTe2 (M=Mn, Fe, Co, Ni). Phys. Rev. B 88, 134502 (2013).
Kamitani, M. et al. Superconductivity in CuxIrTe2 driven by interlayer hybridization. Phys. Rev. B 87, 180501 (2013).
Ootsuki, D. et al. Te 5p orbitals bring three-dimensional electronic structure to two-dimensional Ir0.95Pt0.05Te2 . Phys. Rev. B 89, 104506 (2013).
Boehm, J. & Bak, P. Devil's stairs and the commensurate-commensurate transitions in CeSb. Phys. Rev. Lett. 42, 122–125 (1979).
Bak, P. & Boehm, J. Ising model with solitons, phasons, and ‘the devil’s staircase’. Phys. Rev. B 21, 5297–5308 (1980).
McMillan, W. L. Theory of discommensurations and the commensurate-incommensurate charge-density-wave phase transition. Phys. Rev. B 14, 1496–1502 (1976).
Varma, C. M. & Simons, A. L. Strong-coupling theory of charge-density-wave transitions. Phys. Rev. Lett. 51, 138–141 (1981).
Horcas, I. et al. WSXM: A software for scanning probe microscopy and a tool for nanotechnology. Rev. Sci. Instrum. 78, 013705 (2007).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Singh, D. J. & Nordstrom, L. Planewaves, Pseudopotentials, and the LAPW Method 2nd Edn Springer (2006).
Blaha, P., Schwarz, K., Madsen, G., Kvasnicka, D. & Luitz, J. An Augmented Plane Wave+Local Orbitals Program for Calculating Crystal Properties K. Schwarz, Tech. Univ. Wien (2001).
Acknowledgements
This research was conducted (M.P. and Q.L.) at the Center for Nanophase Materials Sciences, which is sponsored at Oak Ridge National Laboratory by the Scientific User Facilities Division, Office of Basic Energy Sciences, US Department of Energy. Research was supported (W.L., A.G.G., S.V.K., J.Y., X.C., D.J.S. and D.M.) by the US Department of Energy, Basic Energy Sciences, Materials Sciences and Engineering Division. Anthony Gianfrancesco acknowledges fellowship support from the UT/ORNL Bredesen Center for Interdisciplinary Research and Graduate Education.
Author information
Authors and Affiliations
Contributions
Q.L., W.L. and M.P. performed STM measurements and W.L., A.G.G., S.V.K. and M.P. analysed STM data. J.Y. and D.M. grew and characterized the crystals. X.C. and D.J.S. carried out theoretical calculations. All authors discussed the results and M.P. wrote the paper with help from all authors.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Figures 1-7, Supplementary Notes 1-3 and Supplementary References (PDF 992 kb)
Rights and permissions
About this article
Cite this article
Li, Q., Lin, W., Yan, J. et al. Bond competition and phase evolution on the IrTe2 surface. Nat Commun 5, 5358 (2014). https://doi.org/10.1038/ncomms6358
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms6358
This article is cited by
-
Superconductivity emerging from a stripe charge order in IrTe2 nanoflakes
Nature Communications (2021)
-
Spatially-resolved electronic structure of stripe domains in IrTe2 through electronic structure microscopy
Communications Physics (2021)
-
Charge-Stripe Order and Superconductivity in Ir1−xPtxTe2
Scientific Reports (2017)
-
Moiré Superstructure and Dimensional Crossover of 2D Electronic States on Nanoscale Lead Quantum Films
Scientific Reports (2017)
-
What drives superconductivity in Pt-doped IrTe2?
Science Bulletin (2015)