The NZR H class steam locomotive is a unique class of Fell locomotive used by New Zealand Railways (NZR) on the Rimutaka Incline, the 3-mile (4.8 km) section of 1 in 15 (6.67 %) gradient between Cross Creek and Summit, over the Rimutaka Ranges.[1]

NZR H class
H class 204, pictured in 1904
Type and origin
Power typeSteam
BuilderAvonside Engine Co., England (4)
Neilson & Co., Scotland (2)
Serial numberAvonside 1072–1075
Neilson 3468–3469
Build date1875 (4)
1886 (2)
Specifications
Configuration:
 • Whyte0-4-2T
Gauge3 ft 6 in (1,067 mm)
Wheel diameter32 in (813 mm) driving
23.5 in (597 mm) adhesion
Wheelbase14 ft 3 in (4.34 m)
Length24 ft 1 in (7.34 m)
Width8 ft 6 in (2.59 m)
Adhesive weight32.4 long tons (32.9 t; 36.3 short tons)
Loco weight39.8 long tons (40.4 t; 44.6 short tons)
Fuel typeCoal
Fuel capacity0.5 long tons (0.51 t; 0.56 short tons)
Water cap.714 imp gal (3,250 L; 857 US gal)
Firebox:
 • Grate area16.8 sq ft (1.6 m2)
Boiler pressure160 psi (1,100 kPa)
Heating surface794 sq ft (73.8 m2)
CylindersFour total
two driving, two adhesion
Cylinder size14 in × 16 in (356 mm × 406 mm) driving
12 in × 14 in (305 mm × 356 mm) adhesion
Valve gearStephenson (199 - 202)
Joy (203 - 204)
Performance figures
Maximum speed15 mph (24 km/h)
Tractive effort12,550 lbf (55.8 kN) driving
11,000 lbf (49 kN) adhesion
Career
Number in class6
Numbers199 – 204
LocaleRimutaka Incline, Wairarapa, North Island
First run1878
Last run29 October 1955
RetiredMarch 1956
PreservedOne (H 199)
Restored1981 - 1989
Scrapped1956
Current ownerFell Engine Museum
Disposition5 scrapped
1 preserved
2 replicas planned.

Introduction

edit

The first four H class locomotives were built for NZR by the Avonside Engine Company in 1875, and introduced on the Rimutaka Incline from its opening in 1877. They were named as Mount Cenis, Mount Cook, Mount Egmont, and Mount Tongariro. [1][2] In 1886 two additional locomotives were introduced, built by Neilson and Company. The Neilson Locomotives were known as the Dreadnoughts.[1]

Design

edit
 
The underside of H 199, showing details of the Fell railway system, 20 March 2002.

The locomotives worked on the Fell mountain railway system and had four horizontal driving wheels between the frames, gripping a centre rail and providing the extra adhesion needed for the climb. The outside engines drove the rear pair of coupled wheels of 32 in (813 mm) diameter, and the inside cylinders four spring-loaded grip wheels of 22 in (559 mm) diameter. On the descent, powerful hand-brakes bore against the centre rail, and brake vans with similar braking gear were interspersed at intervals in the train. The locomotives were never required to run at speeds higher than 15 mph (24 km/h), and their usual operating speed was between four and six miles per hour (6.4 and 9.7 km/h) ascending the incline, about ten miles per hour (16 km/h) descending.

Withdrawal

edit

After the Second World War, the locomotives were starting to show their age, and the New Zealand government was looking for a way to cut the time between Wellington and the Wairarapa. On 7 May 1951, the contract to construct the 8.8-kilometre (5.5 mi) Rimutaka Tunnel was signed, which spelt the end of the incline, and the need for the H class.

The last revenue service for the H class was on 29 October 1955, when locomotives 199, 201, 202, 203 and 204 hauled a Carterton Show day excursion train up the incline on the return journey to Wellington. When the Rimutaka Tunnel opened five days later, two of the engines were put to work dismantling the incline that they had travelled on for 77 years.

After the closure and dismantling of the line, in February 1956 all of the H class - except H 200 which had been out of service for some time with a collapsed internal steam pipe - were towed to Hutt Workshops. All were written off in March 1956. All except H 199 were towed to the old Silverstream rail yard in 1957 where they were scrapped. H 199 was towed to Featherston on 9 August 1958 by DE 508 (itself now preserved) and put on display in the park in Clifford Square the following month. Years later in 1989 after an 8 year long restoration the locomotive became the centre piece in the Fell Locomotive Museum at Featherston.

Preservation

edit
 
H 199 in the Fell Engine Museum, 20 March 2002.

At the opening ceremony for the Rimutaka Tunnel on 3 November 1955, the then Minister of Railways John McAlpine gifted locomotive H 199 to the town of Featherston. Following dismantling the incline, H 199 was stored at the Hutt Workshops for three years, before being moved through the Rimutaka Tunnel to Featherston. The locomotive was placed on a concrete plinth in a children's playground.[3]

Over the years, exposure to the elements and vandalism had deteriorated the locomotive's condition. In 1980, the Friends of the Fell Society was formed with the intention of restoring H 199 for static display.[3] Restoration began in 1981, and in 1984, the locomotive was moved into the new Fell Engine Museum adjacent to the playground. The restoration of the locomotive was completed in 1989.[4] The society won the A & G Price Locomotive Restoration in 1990.[3] The Rimutaka Incline Railway Heritage Trust plans to build 2 replicas of the H Class for phase 3 of their restoration plans.[5]

References

edit

Citations

edit
  1. ^ a b c Palmer & Stewart 1965, p. 37.
  2. ^ "H Class Register". www.trainweb.org. Retrieved 15 March 2019.
  3. ^ a b c "The Fell Incline Locomotive No. 199". New Zealand Railway Observer. 47 (2/3). New Zealand Railway and Locomotive Society: 50. Winter 1990. ISSN 0028-8624.
  4. ^ Lea 2000, p. 3.
  5. ^ "Newsletter #26, September 2010". Rimutaka Incline Railway Heritage Trust. September 2010. Archived from the original on 17 July 2011. Retrieved 2 December 2010.

Bibliography

edit
edit