The Lorenz system is a system of ordinary differential equations first studied by mathematician and meteorologist Edward Lorenz. It is notable for having chaotic solutions for certain parameter values and initial conditions. In particular, the Lorenz attractor is a set of chaotic solutions of the Lorenz system. The term "butterfly effect" in popular media may stem from the real-world implications of the Lorenz attractor, namely that tiny changes in initial conditions evolve to completely different trajectories. This underscores that chaotic systems can be completely deterministic and yet still be inherently impractical or even impossible to predict over longer periods of time. For example, even the small flap of a butterfly's wings could set the earth's atmosphere on a vastly different trajectory, in which for example a hurricane occurs where it otherwise would have not (see Saddle points). The shape of the Lorenz attractor itself, when plotted in phase space, may also be seen to resemble a butterfly.

A sample solution in the Lorenz attractor when ρ = 28, σ = 10, and β = 8/3

Overview

edit

In 1963, Edward Lorenz, with the help of Ellen Fetter who was responsible for the numerical simulations and figures,[1] and Margaret Hamilton who helped in the initial, numerical computations leading up to the findings of the Lorenz model,[2] developed a simplified mathematical model for atmospheric convection.[1] The model is a system of three ordinary differential equations now known as the Lorenz equations:

 

The equations relate the properties of a two-dimensional fluid layer uniformly warmed from below and cooled from above. In particular, the equations describe the rate of change of three quantities with respect to time: x is proportional to the rate of convection, y to the horizontal temperature variation, and z to the vertical temperature variation.[3] The constants σ, ρ, and β are system parameters proportional to the Prandtl number, Rayleigh number, and certain physical dimensions of the layer itself.[3]

The Lorenz equations can arise in simplified models for lasers,[4] dynamos,[5] thermosyphons,[6] brushless DC motors,[7] electric circuits,[8] chemical reactions[9] and forward osmosis.[10] The Lorenz equations are also the governing equations in Fourier space for the Malkus waterwheel.[11][12] The Malkus waterwheel exhibits chaotic motion where instead of spinning in one direction at a constant speed, its rotation will speed up, slow down, stop, change directions, and oscillate back and forth between combinations of such behaviors in an unpredictable manner.

From a technical standpoint, the Lorenz system is nonlinear, aperiodic, three-dimensional and deterministic. The Lorenz equations have been the subject of hundreds of research articles, and at least one book-length study.[3]

Analysis

edit

One normally assumes that the parameters σ, ρ, and β are positive. Lorenz used the values σ = 10, β = 8/3 and ρ = 28. The system exhibits chaotic behavior for these (and nearby) values.[13]

If ρ < 1 then there is only one equilibrium point, which is at the origin. This point corresponds to no convection. All orbits converge to the origin, which is a global attractor, when ρ < 1.[14]

A pitchfork bifurcation occurs at ρ = 1, and for ρ > 1 two additional critical points appear at   These correspond to steady convection. This pair of equilibrium points is stable only if

 

which can hold only for positive ρ if σ > β + 1. At the critical value, both equilibrium points lose stability through a subcritical Hopf bifurcation.[15]

When ρ = 28, σ = 10, and β = 8/3, the Lorenz system has chaotic solutions (but not all solutions are chaotic). Almost all initial points will tend to an invariant set – the Lorenz attractor – a strange attractor, a fractal, and a self-excited attractor with respect to all three equilibria. Its Hausdorff dimension is estimated from above by the Lyapunov dimension (Kaplan-Yorke dimension) as 2.06±0.01,[16] and the correlation dimension is estimated to be 2.05±0.01.[17] The exact Lyapunov dimension formula of the global attractor can be found analytically under classical restrictions on the parameters:[18][16][19]

 

The Lorenz attractor is difficult to analyze, but the action of the differential equation on the attractor is described by a fairly simple geometric model.[20] Proving that this is indeed the case is the fourteenth problem on the list of Smale's problems. This problem was the first one to be resolved, by Warwick Tucker in 2002.[21]

For other values of ρ, the system displays knotted periodic orbits. For example, with ρ = 99.96 it becomes a T(3,2) torus knot.

Example solutions of the Lorenz system for different values of ρ
   
ρ = 14, σ = 10, β = 8/3 (Enlarge) ρ = 13, σ = 10, β = 8/3 (Enlarge)
   
ρ = 15, σ = 10, β = 8/3 (Enlarge) ρ = 28, σ = 10, β = 8/3 (Enlarge)
For small values of ρ, the system is stable and evolves to one of two fixed point attractors. When ρ > 24.74, the fixed points become repulsors and the trajectory is repelled by them in a very complex way.
Sensitive dependence on the initial condition
Time t = 1 (Enlarge) Time t = 2 (Enlarge) Time t = 3 (Enlarge)
     
These figures — made using ρ = 28, σ = 10 and β = 8/3 — show three time segments of the 3-D evolution of two trajectories (one in blue, the other in yellow) in the Lorenz attractor starting at two initial points that differ only by 10−5 in the x-coordinate. Initially, the two trajectories seem coincident (only the yellow one can be seen, as it is drawn over the blue one) but, after some time, the divergence is obvious.
Divergence of nearby trajectories.
 
Evolution of three initially nearby trajectories of the Lorenz system. In this animation the equation is numerically integrated using a Runge-Kutta routine — made using starting from three initial conditions (0.9,0,0) (green), (1.0,0,0) (blue) and (1.1,0,0) (red). Produced with WxMaxima.
The parameters are:  ,   and   . Siginificant divergence is seen at around  , beyond which the trajectories become uncorrelated. The full-sized graphic can be accessed here.

Connection to tent map

edit
 
A recreation of Lorenz's results created on Mathematica. Points above the red line correspond to the system switching lobes.

In Figure 4 of his paper,[1] Lorenz plotted the relative maximum value in the z direction achieved by the system against the previous relative maximum in the z direction. This procedure later became known as a Lorenz map (not to be confused with a Poincaré plot, which plots the intersections of a trajectory with a prescribed surface). The resulting plot has a shape very similar to the tent map. Lorenz also found that when the maximum z value is above a certain cut-off, the system will switch to the next lobe. Combining this with the chaos known to be exhibited by the tent map, he showed that the system switches between the two lobes chaotically.

A Generalized Lorenz System

edit

Over the past several years, a series of papers regarding high-dimensional Lorenz models have yielded a generalized Lorenz model,[22] which can be simplified into the classical Lorenz model for three state variables or the following five-dimensional Lorenz model for five state variables:[23]  

A choice of the parameter   has been applied to be consistent with the choice of the other parameters. See details in.[22][23]

Simulations

edit
 
Julia Simulation

Julia simulation

edit
using Plots
# define the Lorenz attractor
@kwdef mutable struct Lorenz
    dt::Float64 = 0.02
    σ::Float64 = 10
    ρ::Float64 = 28
    β::Float64 = 8/3
    x::Float64 = 2
    y::Float64 = 1
    z::Float64 = 1
end

function step!(l::Lorenz)
    dx = l.σ * (l.y - l.x);         l.x += l.dt * dx
    dy = l.x * (l.ρ - l.z) - l.y;   l.y += l.dt * dy
    dz = l.x * l.y - l.β * l.z;     l.z += l.dt * dz
end

attractor = Lorenz()

# initialize a 3D plot with 1 empty series
plt = plot3d(
    1,
    xlim = (-30, 30),
    ylim = (-30, 30),
    zlim = (0, 60),
    title = "Lorenz Attractor",
    marker = 2,
)

# build an animated gif by pushing new points to the plot, saving every 10th frame
@gif for i=1:1500
    step!(attractor)
    push!(plt, attractor.x, attractor.y, attractor.z)
end every 10

Maple simulation

edit
deq := [diff(x(t), t) = 10*(y(t) - x(t)), diff(y(t), t) = 28*x(t) - y(t) - x(t)*z(t), diff(z(t), t) = x(t)*y(t) - 8/3*z(t)]:
with(DEtools):
DEplot3d(deq, {x(t), y(t), z(t)}, t = 0 .. 100, [[x(0) = 10, y(0) = 10, z(0) = 10]], stepsize = 0.01, x = -20 .. 20, y = -25 .. 25, z = 0 .. 50, linecolour = sin(t*Pi/3), thickness = 1, orientation = [-40, 80], title = `Lorenz Chaotic Attractor`);

Maxima simulation

edit
[sigma, rho, beta]: [10, 28, 8/3]$
eq: [sigma*(y-x), x*(rho-z)-y, x*y-beta*z]$
sol: rk(eq, [x, y, z], [1, 0, 0], [t, 0, 50, 1/100])$
len: length(sol)$
x: makelist(sol[k][2], k, len)$
y: makelist(sol[k][3], k, len)$
z: makelist(sol[k][4], k, len)$
draw3d(points_joined=true, point_type=-1, points(x, y, z), proportional_axes=xyz)$

MATLAB simulation

edit
% Solve over time interval [0,100] with initial conditions [1,1,1]
% ''f'' is set of differential equations
% ''a'' is array containing x, y, and z variables
% ''t'' is time variable

sigma = 10;
beta = 8/3;
rho = 28;
f = @(t,a) [-sigma*a(1) + sigma*a(2); rho*a(1) - a(2) - a(1)*a(3); -beta*a(3) + a(1)*a(2)];
[t,a] = ode45(f,[0 100],[1 1 1]);     % Runge-Kutta 4th/5th order ODE solver
plot3(a(:,1),a(:,2),a(:,3))

Mathematica simulation

edit

Standard way:

tend = 50;
eq = {x'[t] == σ (y[t] - x[t]), 
      y'[t] == x[t] (ρ - z[t]) - y[t], 
      z'[t] == x[t] y[t] - β z[t]};
init = {x[0] == 10, y[0] == 10, z[0] == 10};
pars = {σ->10, ρ->28, β->8/3};
{xs, ys, zs} = 
  NDSolveValue[{eq /. pars, init}, {x, y, z}, {t, 0, tend}];
ParametricPlot3D[{xs[t], ys[t], zs[t]}, {t, 0, tend}]

Less verbose:

lorenz = NonlinearStateSpaceModel[{{σ (y - x), x (ρ - z) - y, x y - β z}, {}}, {x, y, z}, {σ, ρ, β}];
soln[t_] = StateResponse[{lorenz, {10, 10, 10}}, {10, 28, 8/3}, {t, 0, 50}];
ParametricPlot3D[soln[t], {t, 0, 50}]

Python simulation

edit
import matplotlib.pyplot as plt
import numpy as np

def lorenz(xyz, *, s=10, r=28, b=2.667):
    """
    Parameters
    ----------
    xyz : array-like, shape (3,)
       Point of interest in three-dimensional space.
    s, r, b : float
       Parameters defining the Lorenz attractor.

    Returns
    -------
    xyz_dot : array, shape (3,)
       Values of the Lorenz attractor's partial derivatives at *xyz*.
    """
    x, y, z = xyz
    x_dot = s*(y - x)
    y_dot = r*x - y - x*z
    z_dot = x*y - b*z
    return np.array([x_dot, y_dot, z_dot])

dt = 0.01
num_steps = 10000

xyzs = np.empty((num_steps + 1, 3))  # Need one more for the initial values
xyzs[0] = (0., 1., 1.05)  # Set initial values
# Step through "time", calculating the partial derivatives at the current point
# and using them to estimate the next point
for i in range(num_steps):
    xyzs[i + 1] = xyzs[i] + lorenz(xyzs[i]) * dt

# Plot
ax = plt.figure().add_subplot(projection='3d')

ax.plot(*xyzs.T, lw=0.6)
ax.set_xlabel("X Axis")
ax.set_ylabel("Y Axis")
ax.set_zlabel("Z Axis")
ax.set_title("Lorenz Attractor")

plt.show()
 
R Simulation

R simulation

edit
library(deSolve)
library(plotly)
# parameters
prm <- list(sigma = 10, rho = 28, beta = 8/3)
# initial values
varini <- c(
  X = 1,
  Y = 1, 
  Z = 1
)

Lorenz <- function (t, vars, prm) {
  with(as.list(vars), {
    dX <- prm$sigma*(Y - X)
    dY <- X*(prm$rho - Z) - Y
    dZ <- X*Y - prm$beta*Z
    return(list(c(dX, dY, dZ)))
   })
}

times <- seq(from = 0, to = 100, by = 0.01)
# call ode solver
out <- ode(y = varini, times = times, func = Lorenz,
           parms = prm)

# to assign color to points
gfill <- function (repArr, long) {
  rep(repArr, ceiling(long/length(repArr)))[1:long]
}

dout <- as.data.frame(out)

dout$color <- gfill(rainbow(10), nrow(dout))

# Graphics production with Plotly:
plot_ly(
  data=dout, x = ~X, y = ~Y, z = ~Z,
  type = 'scatter3d', mode = 'lines',
  opacity = 1, line = list(width = 6, color = ~color, reverscale = FALSE)
)

Applications

edit

Model for atmospheric convection

edit

As shown in Lorenz's original paper,[24] the Lorenz system is a reduced version of a larger system studied earlier by Barry Saltzman.[25] The Lorenz equations are derived from the Oberbeck–Boussinesq approximation to the equations describing fluid circulation in a shallow layer of fluid, heated uniformly from below and cooled uniformly from above.[26] This fluid circulation is known as Rayleigh–Bénard convection. The fluid is assumed to circulate in two dimensions (vertical and horizontal) with periodic rectangular boundary conditions.[27]

The partial differential equations modeling the system's stream function and temperature are subjected to a spectral Galerkin approximation: the hydrodynamic fields are expanded in Fourier series, which are then severely truncated to a single term for the stream function and two terms for the temperature. This reduces the model equations to a set of three coupled, nonlinear ordinary differential equations. A detailed derivation may be found, for example, in nonlinear dynamics texts from Hilborn (2000), Appendix C; Bergé, Pomeau & Vidal (1984), Appendix D; or Shen (2016),[28] Supplementary Materials.

Model for the nature of chaos and order in the atmosphere

edit

The scientific community accepts that the chaotic features found in low-dimensional Lorenz models could represent features of the Earth's atmosphere ([29][30][31]), yielding the statement of “weather is chaotic.” By comparison, based on the concept of attractor coexistence within the generalized Lorenz model[22] and the original Lorenz model ([32][33]), Shen and his co-authors [31][34] proposed a revised view that “weather possesses both chaos and order with distinct predictability”. The revised view,  which is a build-up of the conventional view, is used to suggest that “the chaotic and regular features found in theoretical Lorenz models could better represent features of the Earth's atmosphere”.

Resolution of Smale's 14th problem

edit

Smale's 14th problem says, 'Do the properties of the Lorenz attractor exhibit that of a strange attractor?'. The problem was answered affirmatively by Warwick Tucker in 2002.[21] To prove this result, Tucker used rigorous numerics methods like interval arithmetic and normal forms. First, Tucker defined a cross section   that is cut transversely by the flow trajectories. From this, one can define the first-return map  , which assigns to each   the point   where the trajectory of   first intersects  .

Then the proof is split in three main points that are proved and imply the existence of a strange attractor.[35] The three points are:

  • There exists a region   invariant under the first-return map, meaning  .
  • The return map admits a forward invariant cone field.
  • Vectors inside this invariant cone field are uniformly expanded by the derivative   of the return map.

To prove the first point, we notice that the cross section   is cut by two arcs formed by  .[35] Tucker covers the location of these two arcs by small rectangles  , the union of these rectangles gives  . Now, the goal is to prove that for all points in  , the flow will bring back the points in  , in  . To do that, we take a plan   below   at a distance   small, then by taking the center   of   and using Euler integration method, one can estimate where the flow will bring   in   which gives us a new point  . Then, one can estimate where the points in   will be mapped in   using Taylor expansion, this gives us a new rectangle   centered on  . Thus we know that all points in   will be mapped in  . The goal is to do this method recursively until the flow comes back to   and we obtain a rectangle   in   such that we know that  . The problem is that our estimation may become imprecise after several iterations, thus what Tucker does is to split   into smaller rectangles   and then apply the process recursively. Another problem is that as we are applying this algorithm, the flow becomes more 'horizontal',[35] leading to a dramatic increase in imprecision. To prevent this, the algorithm changes the orientation of the cross sections, becoming either horizontal or vertical.

edit

See also

edit

Notes

edit
  1. ^ a b c Lorenz (1963)
  2. ^ Lorenz (1960)
  3. ^ a b c Sparrow (1982)
  4. ^ Haken (1975)
  5. ^ Knobloch (1981)
  6. ^ Gorman, Widmann & Robbins (1986)
  7. ^ Hemati (1994)
  8. ^ Cuomo & Oppenheim (1993)
  9. ^ Poland (1993)
  10. ^ Tzenov (2014)[citation needed]
  11. ^ Kolář & Gumbs (1992)
  12. ^ Mishra & Sanghi (2006)
  13. ^ Hirsch, Smale & Devaney (2003), pp. 303–305
  14. ^ Hirsch, Smale & Devaney (2003), pp. 306+307
  15. ^ Hirsch, Smale & Devaney (2003), pp. 307–308
  16. ^ a b Kuznetsov, N.V.; Mokaev, T.N.; Kuznetsova, O.A.; Kudryashova, E.V. (2020). "The Lorenz system: hidden boundary of practical stability and the Lyapunov dimension". Nonlinear Dynamics. 102 (2): 713–732. doi:10.1007/s11071-020-05856-4.
  17. ^ Grassberger & Procaccia (1983)
  18. ^ Leonov et al. (2016)
  19. ^ Kuznetsov, Nikolay; Reitmann, Volker (2021). Attractor Dimension Estimates for Dynamical Systems: Theory and Computation. Cham: Springer.
  20. ^ Guckenheimer, John; Williams, R. F. (1979-12-01). "Structural stability of Lorenz attractors". Publications Mathématiques de l'Institut des Hautes Études Scientifiques. 50 (1): 59–72. doi:10.1007/BF02684769. ISSN 0073-8301. S2CID 55218285.
  21. ^ a b Tucker (2002)
  22. ^ a b c Shen, Bo-Wen (2019-03-01). "Aggregated Negative Feedback in a Generalized Lorenz Model". International Journal of Bifurcation and Chaos. 29 (3): 1950037–1950091. Bibcode:2019IJBC...2950037S. doi:10.1142/S0218127419500378. ISSN 0218-1274. S2CID 132494234.
  23. ^ a b Shen, Bo-Wen (2014-04-28). "Nonlinear Feedback in a Five-Dimensional Lorenz Model". Journal of the Atmospheric Sciences. 71 (5): 1701–1723. Bibcode:2014JAtS...71.1701S. doi:10.1175/jas-d-13-0223.1. ISSN 0022-4928. S2CID 123683839.
  24. ^ Lorenz (1963)
  25. ^ Saltzman (1962)
  26. ^ Lorenz (1963)
  27. ^ Lorenz (1963)
  28. ^ Shen, B.-W. (2015-12-21). "Nonlinear feedback in a six-dimensional Lorenz model: impact of an additional heating term". Nonlinear Processes in Geophysics. 22 (6): 749–764. Bibcode:2015NPGeo..22..749S. doi:10.5194/npg-22-749-2015. ISSN 1607-7946.
  29. ^ Ghil, Michael; Read, Peter; Smith, Leonard (2010-07-23). "Geophysical flows as dynamical systems: the influence of Hide's experiments". Astronomy & Geophysics. 51 (4): 4.28–4.35. Bibcode:2010A&G....51d..28G. doi:10.1111/j.1468-4004.2010.51428.x. ISSN 1366-8781.
  30. ^ Read, P. (1993). Application of Chaos to Meteorology and Climate. In The Nature of Chaos; Mullin, T., Ed. Oxford, UK: Oxford Science Publications. pp. 220–260. ISBN 0198539541.
  31. ^ a b Shen, Bo-Wen; Pielke, Roger; Zeng, Xubin; Cui, Jialin; Faghih-Naini, Sara; Paxson, Wei; Kesarkar, Amit; Zeng, Xiping; Atlas, Robert (2022-11-12). "The Dual Nature of Chaos and Order in the Atmosphere". Atmosphere. 13 (11): 1892. Bibcode:2022Atmos..13.1892S. doi:10.3390/atmos13111892. ISSN 2073-4433.
  32. ^ Yorke, James A.; Yorke, Ellen D. (1979-09-01). "Metastable chaos: The transition to sustained chaotic behavior in the Lorenz model". Journal of Statistical Physics. 21 (3): 263–277. Bibcode:1979JSP....21..263Y. doi:10.1007/BF01011469. ISSN 1572-9613. S2CID 12172750.
  33. ^ Shen, Bo-Wen; Pielke, R. A.; Zeng, X.; Baik, J.-J.; Faghih-Naini, S.; Cui, J.; Atlas, R.; Reyes, T. A. L. (2021), Skiadas, Christos H.; Dimotikalis, Yiannis (eds.), "Is Weather Chaotic? Coexisting Chaotic and Non-chaotic Attractors within Lorenz Models", 13th Chaotic Modeling and Simulation International Conference, Springer Proceedings in Complexity, Cham: Springer International Publishing, pp. 805–825, doi:10.1007/978-3-030-70795-8_57, ISBN 978-3-030-70794-1, S2CID 245197840, retrieved 2022-12-22
  34. ^ Shen, Bo-Wen; Pielke, Roger A.; Zeng, Xubin; Baik, Jong-Jin; Faghih-Naini, Sara; Cui, Jialin; Atlas, Robert (2021-01-01). "Is Weather Chaotic?: Coexistence of Chaos and Order within a Generalized Lorenz Model". Bulletin of the American Meteorological Society. 102 (1): E148–E158. Bibcode:2021BAMS..102E.148S. doi:10.1175/BAMS-D-19-0165.1. ISSN 0003-0007. S2CID 208369617.
  35. ^ a b c Viana (2000)
  36. ^ Heitmann, S., Breakspear, M (2017-2022) Brain Dynamics Toolbox. bdtoolbox.org doi.org/10.5281/zenodo.5625923

References

edit

Further reading

edit
edit