-
Precision spectroscopy and frequency determination of the hyperfine components of the P(63) 4-4 transition of molecular iodine near 652 nm
Authors:
Shamaila Manzoor,
Mauro Chiarotti,
Samuel A. Meek,
Gabriele Santambrogio,
Nicola Poli
Abstract:
We report the observation of the hyperfine spectrum of the weak P(63)4-4 line of the B-X electronic transition of molecular iodine 127I2 near 652.4 nm, using frequency-modulated saturated absorption spectroscopy. Through the precise measurements of the absolute frequencies of hyperfine components, we estimate electric quadrupole and magnetic spin-rotation constants. Additionally, we determine the…
▽ More
We report the observation of the hyperfine spectrum of the weak P(63)4-4 line of the B-X electronic transition of molecular iodine 127I2 near 652.4 nm, using frequency-modulated saturated absorption spectroscopy. Through the precise measurements of the absolute frequencies of hyperfine components, we estimate electric quadrupole and magnetic spin-rotation constants. Additionally, we determine the center of gravity of the P(63) transition of the 4-4 vibrational band, resulting in a 250-fold improvement in the precision of its position. We also note an interesting overlap of the hyperfine transitions of P(63)4-4 line with the UV 1S0-3P1 narrow intercombination transition of cadmium atoms, which occurs near the second harmonic of the master laser radiation, corresponding to 326.2 nm. This study contributes to updating the iodine atlas, improving the precision of the empirical formulae, and providing an important frequency reference for precision spectroscopy of the narrow intercombination transition of atomic cadmium.
△ Less
Submitted 4 October, 2024;
originally announced October 2024.
-
Design and simulation of a source of cold cadmium for atom interferometry
Authors:
Satvika Bandarupally,
Jonathan N. Tinsley,
Mauro Chiarotti,
Nicola Poli
Abstract:
We present a novel optimised design for a source of cold atomic cadmium, compatible with continuous operation and potentially quantum degenerate gas production. The design is based on spatially segmenting the first and second-stages of cooling with the the strong dipole-allowed $^1$S$_0$-$^1$P$_1$ transition at 229 nm and the 326 nm $^1$S$_0$-$^3$P$_1$ intercombination transition, respectively. Co…
▽ More
We present a novel optimised design for a source of cold atomic cadmium, compatible with continuous operation and potentially quantum degenerate gas production. The design is based on spatially segmenting the first and second-stages of cooling with the the strong dipole-allowed $^1$S$_0$-$^1$P$_1$ transition at 229 nm and the 326 nm $^1$S$_0$-$^3$P$_1$ intercombination transition, respectively. Cooling at 229 nm operates on an effusive atomic beam and takes the form of a compact Zeeman slower ($\sim$5 cm) and two-dimensional magneto-optical trap (MOT), both based on permanent magnets. This design allows for reduced interaction time with the photoionising 229 nm photons and produces a slow beam of atoms that can be directly loaded into a three-dimensional MOT using the intercombination transition. The efficiency of the above process is estimated across a broad range of experimentally feasible parameters via use of a Monte Carlo simulation, with loading rates up to 10$^8$ atoms/s into the 326 nm MOT possible with the oven at only 100 $^\circ$C. The prospects for further cooling in a far-off-resonance optical-dipole trap and atomic launching in a moving optical lattice are also analysed, especially with reference to the deployment in a proposed dual-species cadmium-strontium atom interferometer.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
Practical limits for large-momentum-transfer clock atom interferometers
Authors:
Mauro Chiarotti,
Jonathan N. Tinsley,
Satvika Bandarupally,
Shamaila Manzoor,
Michele Sacco,
Leonardo Salvi,
Nicola Poli
Abstract:
Atom interferometry on optical clock transitions is being pursued for numerous long-baseline experiments both terrestrially and for future space missions. Crucial to meeting these experiments' required sensitivities is the implementation of large momentum transfer ($>$10$^3\hbar k$). Here we show that to sequentially apply such a large momentum via $π$ pulses places stringent requirements on the f…
▽ More
Atom interferometry on optical clock transitions is being pursued for numerous long-baseline experiments both terrestrially and for future space missions. Crucial to meeting these experiments' required sensitivities is the implementation of large momentum transfer ($>$10$^3\hbar k$). Here we show that to sequentially apply such a large momentum via $π$ pulses places stringent requirements on the frequency noise of the interferometry laser, finding that the linewidth is required to be considerably lower than has previously been suggested. This is due to imperfect pulse fidelity in the presence of noise and is apparent even for an atom at rest interacting with resonant light, making this a fundamental constraint on operational fidelity for a given laser and pulse sequence. Within this framework, we further present and analyse two high-power, frequency-stabilised laser sources designed to perform interferometry on the $^1$S$_0$ - $^3$P$_0$ clock transitions of cadmium and strontium, respectively operating at 332 nm and 698 nm.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
High-power, frequency-quadrupled UV laser source resonant with the $^{1}$S$_{0}$-$^{3}$P$_{1}$ narrow intercombination transition of cadmium at 326.2 nm
Authors:
S. Manzoor,
J. N. Tinsley,
S. Bandarupally,
M. Chiarotti,
N. Poli
Abstract:
We present a novel high-power, frequency-stabilized UV laser source at 326.2~nm, resonant with the Cd $^{1}$S$_{0}$ - $^{3}$P$_{1}$ narrow intercombination transition. We have achieved a maximum produced power of 1~W at 326.2~nm by two successive frequency doubling stages of a narrow-linewidth (< 1~kHz) seed laser at 1304.8~nm. About 3.4 W of optical power at 652.4 nm is produced by a visible Rama…
▽ More
We present a novel high-power, frequency-stabilized UV laser source at 326.2~nm, resonant with the Cd $^{1}$S$_{0}$ - $^{3}$P$_{1}$ narrow intercombination transition. We have achieved a maximum produced power of 1~W at 326.2~nm by two successive frequency doubling stages of a narrow-linewidth (< 1~kHz) seed laser at 1304.8~nm. About 3.4 W of optical power at 652.4 nm is produced by a visible Raman fiber amplifier (VRFA) that amplifies and generates the second harmonic of the infrared radiation. The visible light is subsequently frequency-doubled down to 326.2~nm in a non-linear bow-tie cavity using a Brewster-cut beta-barium-borate (BBO) crystal, with a maximum conversion efficiency of around 40$\%$ for 2.5~W coupled red power. Full characterization of the laser source, together with spectroscopy signals of all Cd isotopes, spanning more than 4 GHz in the UV, are shown.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
A flexible control system for atomic, molecular and optical physics experiments
Authors:
Andreas Trenkwalder,
Matteo Zaccanti,
Nicola Poli
Abstract:
We have implemented a control system for experiments in atomic, molecular and optical physics based on a commercial low-cost board, featuring a field-programmable gate array as part of a system-on-a-chip on which a Linux operating system is running. The board features Gigabit Ethernet, allowing for fast data transmission and operation of remote experimental systems. A single board can control a se…
▽ More
We have implemented a control system for experiments in atomic, molecular and optical physics based on a commercial low-cost board, featuring a field-programmable gate array as part of a system-on-a-chip on which a Linux operating system is running. The board features Gigabit Ethernet, allowing for fast data transmission and operation of remote experimental systems. A single board can control a set of devices generating digital, analog and radio frequency signals with a precise timing given either by an external or internal clock. Contiguous output and input sampling rates of up to 40 MHz are achievable. Several boards can run synchronously with a timing error approaching 1 ns. For this purpose, a novel auto-synchronization scheme is demonstrated, with possible application in complex distributed experimental setups with demanding timing requests.
△ Less
Submitted 5 June, 2021;
originally announced June 2021.
-
Watt-level blue light for precision spectroscopy, laser cooling and trapping of strontium and cadmium atoms
Authors:
Jonathan N. Tinsley,
Satvika Bandarupally,
Jussi-Pekka Penttinen,
Shamaila Manzoor,
Sanna Ranta,
Leonardo Salvi,
Mircea Guina,
Nicola Poli
Abstract:
High-power and narrow-linewidth laser light is a vital tool for atomic physics, being used for example in laser cooling and trapping and precision spectroscopy. Here we produce Watt-level laser radiation at 457.49 nm and 460.86 nm of respective relevance for the cooling transitions of cadmium and strontium atoms. This is achieved via the frequency doubling of a kHz-linewidth vertical-external-cavi…
▽ More
High-power and narrow-linewidth laser light is a vital tool for atomic physics, being used for example in laser cooling and trapping and precision spectroscopy. Here we produce Watt-level laser radiation at 457.49 nm and 460.86 nm of respective relevance for the cooling transitions of cadmium and strontium atoms. This is achieved via the frequency doubling of a kHz-linewidth vertical-external-cavity surface-emitting laser (VECSEL), which is based on a novel gain chip design enabling lasing at > 2 W in the 915-928 nm region. Following an additional doubling stage, spectroscopy of the $^1S_0\to{}^1P_1$ cadmium transition at 228.89 nm is performed on an atomic beam, with all the transitions from all eight natural isotopes observed in a single continuous sweep of more than 4 GHz in the deep ultraviolet. The absolute value of the transition frequency of Cd-114 and the isotope shifts relative to this transition are determined, with values for some of these shifts provided for the first time
△ Less
Submitted 24 April, 2021;
originally announced April 2021.
-
Canceling the cavity length induced phase noise in an optical ring cavity for phase shift measurement and spin squeezing
Authors:
Enlong Wang,
Gunjan Verma,
Jonathan N. Tinsley,
Nicola Poli,
Leonardo Salvi
Abstract:
We demonstrate a new method of light phase shift measurement using a high-finesse optical ring cavity which exhibits reduced phase noise due to cavity length fluctuations. Two laser beams with a frequency difference of one cavity free spectral range are simultaneously resonant with the cavity, demonstrating noise correlations in the error signals due to the common-mode cavity length fluctuations.…
▽ More
We demonstrate a new method of light phase shift measurement using a high-finesse optical ring cavity which exhibits reduced phase noise due to cavity length fluctuations. Two laser beams with a frequency difference of one cavity free spectral range are simultaneously resonant with the cavity, demonstrating noise correlations in the error signals due to the common-mode cavity length fluctuations. The differential error signal shows a 30 dB reduction in cavity noise down to the noise floor in a frequency range up to half the cavity linewidth ($δν/2 \simeq 30$ kHz). Various noise sources are analyzed and their contributions to the noise floor are evaluated. Additionally, we apply this noise-reduced phase shift measurement scheme in a simulated spin-squeezing experiment where we have achieved a factor of 40 improvement in phase sensitivity with a phase resolution of 0.7 mrad, which may remove one important barrier against attaining highly spin-squeezed states. The demonstrated method is the first reported measurement using an optical ring cavity and two independent beams, a flexible situation. This method can find direct application to non-destructive measurements in quantum systems, such as for the generation of spin-squeezed states in atom interferometers and atomic clocks.
△ Less
Submitted 10 September, 2020;
originally announced September 2020.
-
Sr atom interferometry with the optical clock transition as a gravimeter and a gravity gradiometer
Authors:
Liang Hu,
Enlong Wang,
Leonardo Salvi,
Jonathan N. Tinsley,
Guglielmo M. Tino,
Nicola Poli
Abstract:
We characterize the performance of a gravimeter and a gravity gradiometer based on the $^{1}$S$_{0}$-$^3$P$_0$ clock transition of strontium atoms. We use this new quantum sensor to measure the gravitational acceleration with a relative sensitivity of $1.7\times10^{-5}$, representing the first realisation of an atomic interferometry gravimeter based on a single-photon transition. Various noise con…
▽ More
We characterize the performance of a gravimeter and a gravity gradiometer based on the $^{1}$S$_{0}$-$^3$P$_0$ clock transition of strontium atoms. We use this new quantum sensor to measure the gravitational acceleration with a relative sensitivity of $1.7\times10^{-5}$, representing the first realisation of an atomic interferometry gravimeter based on a single-photon transition. Various noise contributions to the gravimeter are measured and characterized, with the current primary limitation to sensitivity seen to be the intrinsic noise of the interferometry laser itself. In a gravity gradiometer configuration, a differential phase sensitivity of 1.53~rad/$\sqrt{Hz}$ was achieved at an artificially introduced differential phase of $π/2$~rad. We experimentally investigated the effects of the contrast and visibility based on various parameters and achieve a total interferometry time of 30~ms, which is longer than previously reported for such interferometers. The characterization and determined limitations of the present apparatus employing $^{88}$Sr atoms provides a guidance for the future development of large-scale clock-transition gravimeters and gravity gradiometers with alkali-earth and alkali-earth-like atoms (e.g., $^{87}$Sr, Ca, Yb).
△ Less
Submitted 24 July, 2019;
originally announced July 2019.
-
Squeezed state metrology with Bragg interferometers operating in a cavity
Authors:
Athreya Shankar,
Leonardo Salvi,
Maria Luisa Chiofalo,
Nicola Poli,
Murray J Holland
Abstract:
Bragg interferometers, operating using pseudospin-1/2 systems composed of two momentum states, have become a mature technology for precision measurements. State-of-the-art Bragg interferometers are rapidly surpassing technical limitations and are soon expected to operate near the projection noise limit set by uncorrelated atoms. Despite the use of large numbers of atoms, their operation is governe…
▽ More
Bragg interferometers, operating using pseudospin-1/2 systems composed of two momentum states, have become a mature technology for precision measurements. State-of-the-art Bragg interferometers are rapidly surpassing technical limitations and are soon expected to operate near the projection noise limit set by uncorrelated atoms. Despite the use of large numbers of atoms, their operation is governed by single-atom physics. Motivated by recent proposals and demonstrations of Raman gravimeters in cavities, we propose a scheme to squeeze directly on momentum states for surpassing the projection noise limit in Bragg interferometers. In our modeling, we consider the unique issues that arise when a spin squeezing protocol is applied to momentum pseudospins. Specifically, we study the effects of the momentum width of the atomic cloud and the coupling to momentum states outside the pseudospin manifold, as these atoms interact via a mode of the cavity. We show that appreciable levels of spin squeezing can be demonstrated in suitable parameter regimes in spite of these complications. Using this setting, we show how beyond mean-field techniques developed for spin systems can be adapted to study the dynamics of momentum states of interacting atoms. Our scheme promises to be feasible using current technology and is experimentally attractive because it requires no additional setup beyond what will be required to operate Bragg interferometers in cavities.
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
SAGE: A Proposal for a Space Atomic Gravity Explorer
Authors:
G. M. Tino,
A. Bassi,
G. Bianco,
K. Bongs,
P. Bouyer,
L. Cacciapuoti,
S. Capozziello,
X. Chen,
M. L. Chiofalo,
A. Derevianko,
W. Ertmer,
N. Gaaloul,
P. Gill,
P. W. Graham,
J. M. Hogan,
L. Iess,
M. A. Kasevich,
H. Katori,
C. Klempt,
X. Lu,
L. -S. Ma,
H. Müller,
N. R. Newbury,
C. Oates,
A. Peters
, et al. (22 additional authors not shown)
Abstract:
The proposed mission "Space Atomic Gravity Explorer" (SAGE) has the scientific objective to investigate gravitational waves, dark matter, and other fundamental aspects of gravity as well as the connection between gravitational physics and quantum physics using new quantum sensors, namely, optical atomic clocks and atom interferometers based on ultracold strontium atoms.
The proposed mission "Space Atomic Gravity Explorer" (SAGE) has the scientific objective to investigate gravitational waves, dark matter, and other fundamental aspects of gravity as well as the connection between gravitational physics and quantum physics using new quantum sensors, namely, optical atomic clocks and atom interferometers based on ultracold strontium atoms.
△ Less
Submitted 18 November, 2019; v1 submitted 8 July, 2019;
originally announced July 2019.
-
Bragg gravity-gradiometer using the $^1$S$_0$-$^3$P$_1$ intercombination transition of $^{88}$Sr
Authors:
Ruben P. del Aguila,
Tommaso Mazzoni,
Liang Hu,
Leonardo Salvi,
Guglielmo M. Tino,
Nicola Poli
Abstract:
We present a gradiometer based on matter-wave interference of alkaline-earth-metal atoms, namely $^{88}$Sr. The coherent manipulation of the atomic external degrees of freedom is obtained by large-momentum-transfer Bragg diffraction, driven by laser fields detuned away from the narrow $^1$S$_0$-$^3$P$_1$ intercombination transition. We use a well-controlled artificial gradient, realized by changin…
▽ More
We present a gradiometer based on matter-wave interference of alkaline-earth-metal atoms, namely $^{88}$Sr. The coherent manipulation of the atomic external degrees of freedom is obtained by large-momentum-transfer Bragg diffraction, driven by laser fields detuned away from the narrow $^1$S$_0$-$^3$P$_1$ intercombination transition. We use a well-controlled artificial gradient, realized by changing the relative frequencies of the Bragg pulses during the interferometer sequence, in order to characterize the sensitivity of the gradiometer. The sensitivity reaches $1.5 \times 10^{-5}$ s$^{-2}$ for an interferometer time of 20 ms, limited only by geometrical constraints. We observed extremely low sensitivity of the gradiometric phase to magnetic field gradients, approaching a value 10$^{5}$ times lower than the sensitivity of alkali-atom based gradiometers. An efficient double-launch technique employing accelerated red vertical lattices from a single magneto-optical trap cloud is also demonstrated. These results highlight strontium as an ideal candidate for precision measurements of gravity gradients, with potential application in future precision tests of fundamental physics.
△ Less
Submitted 4 December, 2017;
originally announced December 2017.
-
Imaging optical frequencies with 100 $μ$Hz precision and 1.1 $μ$m resolution
Authors:
G. Edward Marti,
Ross B. Hutson,
Akihisa Goban,
Sara L. Campbell,
Nicola Poli,
Jun Ye
Abstract:
We implement imaging spectroscopy of the optical clock transition of lattice-trapped degenerate fermionic Sr in the Mott-insulating regime, combining micron spatial resolution with submillihertz spectral precision. We use these tools to demonstrate atomic coherence for up to 15 s on the clock transition and reach a record frequency precision of $2.5\times 10^{-19}$. We perform the most rapid evalu…
▽ More
We implement imaging spectroscopy of the optical clock transition of lattice-trapped degenerate fermionic Sr in the Mott-insulating regime, combining micron spatial resolution with submillihertz spectral precision. We use these tools to demonstrate atomic coherence for up to 15 s on the clock transition and reach a record frequency precision of $2.5\times 10^{-19}$. We perform the most rapid evaluation of trapping light shifts and record a 150 mHz linewidth, the narrowest Rabi line shape observed on a coherent optical transition. The important emerging capability of combining high-resolution imaging and spectroscopy will improve the clock precision, and provide a path towards measuring many-body interactions and testing fundamental physics.
△ Less
Submitted 12 March, 2018; v1 submitted 22 November, 2017;
originally announced November 2017.
-
Atom interferometry with the Sr optical clock transition
Authors:
Liang Hu,
Nicola Poli,
Leonardo Salvi,
Guglielmo M. Tino
Abstract:
We report on the realization of a matter-wave interferometer based on single-photon interaction on the ultra-narrow optical clock transition of strontium atoms. We experimentally demonstrated its operation as a gravimeter and as a gravity gradiometer. No reduction of interferometric contrast was observed up to an interferometer time $2T=10$ ms, limited by geometric constraints of the apparatus. In…
▽ More
We report on the realization of a matter-wave interferometer based on single-photon interaction on the ultra-narrow optical clock transition of strontium atoms. We experimentally demonstrated its operation as a gravimeter and as a gravity gradiometer. No reduction of interferometric contrast was observed up to an interferometer time $2T=10$ ms, limited by geometric constraints of the apparatus. In the gradiometric configuration, the sensitivity approaches the shot noise limit. Single-photon interferometers represent a new class of high-precision sensors that could be used for the detection of gravitational waves in so far unexplored frequency ranges and to enlighten the boundary between Quantum Mechanics and General Relativity.
△ Less
Submitted 16 August, 2017;
originally announced August 2017.
-
Squeezing on momentum states for atom interferometry
Authors:
Leonardo Salvi,
Nicola Poli,
Vladan Vuletic,
Guglielmo M. Tino
Abstract:
We propose and analyse a method that allows for the production of squeezed states of the atomic center-of-mass motion that can be injected into an atom interferometer. Our scheme employs dispersive probing in a ring resonator on a narrow transition of strontium atoms in order to provide a collective measurement of the relative population of two momentum states. We show that this method is applicab…
▽ More
We propose and analyse a method that allows for the production of squeezed states of the atomic center-of-mass motion that can be injected into an atom interferometer. Our scheme employs dispersive probing in a ring resonator on a narrow transition of strontium atoms in order to provide a collective measurement of the relative population of two momentum states. We show that this method is applicable to a Bragg diffraction-based atom interferometer with large diffraction orders. The applicability of this technique can be extended also to small diffraction orders and large atom numbers by inducing atomic transparency at the frequency of the probe field, reaching an interferometer phase resolution scaling $Δφ\sim N^{-3/4}$, where $N$ is the atom number. We show that for realistic parameters it is possible to obtain a 20 dB gain in interferometer phase estimation compared to the Standard Quantum Limit.
△ Less
Submitted 16 August, 2017;
originally announced August 2017.
-
A trapped atom interferometer with ultracold Sr atoms
Authors:
Xian Zhang,
Ruben Pablo del Aguila,
Tommaso Mazzoni,
Nicola Poli,
Guglielmo M. Tino
Abstract:
We report on a trapped atom interferometer based on Bragg diffraction and Bloch oscillations with alkaline-earth-metal atoms. We use a Ramsey-Bordé Bragg interferometer with $^{88}$Sr atoms combined with Bloch oscillations to extend the interferometer time. Thanks to a long coherence time for Bloch oscillations of $^{88}$Sr atoms, we observed interference up to 1 s evolution time in the lattice. A…
▽ More
We report on a trapped atom interferometer based on Bragg diffraction and Bloch oscillations with alkaline-earth-metal atoms. We use a Ramsey-Bordé Bragg interferometer with $^{88}$Sr atoms combined with Bloch oscillations to extend the interferometer time. Thanks to a long coherence time for Bloch oscillations of $^{88}$Sr atoms, we observed interference up to 1 s evolution time in the lattice. A detailed study of decoherence sources during the Bloch phase is also presented. While still limited in sensitivity by lattice lifetime and beam inhomogeneity this result opens the way to high contrast trapped interferometers with extended interrogation time.
△ Less
Submitted 20 September, 2016;
originally announced September 2016.
-
Large-momentum-transfer Bragg interferometer with strontium atoms
Authors:
T. Mazzoni,
X. Zhang,
R. Del Aguila,
L. Salvi,
N. Poli,
G. M. Tino
Abstract:
We report on the first atom interferometer based on Bragg diffraction in a fountain of alkaline-earth atoms, namely $^{88}$Sr. We demonstrate large momentum transfer to the atoms up to eight photon recoils and the use of the interferometer as a gravimeter with a sensitivity $δg/g=4\times 10^{-8}$. Thanks to the special characteristics of strontium atoms for precision measurements, this result open…
▽ More
We report on the first atom interferometer based on Bragg diffraction in a fountain of alkaline-earth atoms, namely $^{88}$Sr. We demonstrate large momentum transfer to the atoms up to eight photon recoils and the use of the interferometer as a gravimeter with a sensitivity $δg/g=4\times 10^{-8}$. Thanks to the special characteristics of strontium atoms for precision measurements, this result opens a new way for experiments in fundamental and applied physics.
△ Less
Submitted 27 October, 2015;
originally announced October 2015.
-
Development of a strontium optical lattice clock for the SOC mission on the ISS
Authors:
K. Bongs,
Y. Singh,
L. Smith,
W. He,
O. Kock,
D. Swierad,
J. Hughes,
S. Schiller,
S. Alighanbari,
S. Origlia,
S. Vogt,
U. Sterr,
Ch. Lisdat,
R. Le Targat,
J. Lodewyck,
D. Holleville,
B. Venon,
S. Bize,
G. P. Barwood,
P. Gill,
I. R. Hill,
Y. B. Ovchinnikov,
N. Poli,
G. M. Tino,
J. Stuhler
, et al. (2 additional authors not shown)
Abstract:
Ultra-precise optical clocks in space will allow new studies in fundamental physics and astronomy. Within an European Space Agency (ESA) program, the Space Optical Clocks (SOC) project aims to install and to operate an optical lattice clock on the International Space Station (ISS) towards the end of this decade. It would be a natural follow-on to the ACES mission, improving its performance by at l…
▽ More
Ultra-precise optical clocks in space will allow new studies in fundamental physics and astronomy. Within an European Space Agency (ESA) program, the Space Optical Clocks (SOC) project aims to install and to operate an optical lattice clock on the International Space Station (ISS) towards the end of this decade. It would be a natural follow-on to the ACES mission, improving its performance by at least one order of magnitude. The payload is planned to include an optical lattice clock, as well as a frequency comb, a microwave link, and an optical link for comparisons of the ISS clock with ground clocks located in several countries and continents. Within the EU-FP7-SPACE-2010-1 project no. 263500, during the years 2011-2015 a compact, modular and robust strontium lattice optical clock demonstrator has been developed. Goal performance is a fractional frequency instability below 1x10^{-15}, tau^{-1/2} and a fractional inaccuracy below 5x10^{-17}. Here we describe the current status of the apparatus' development, including the laser subsystems. Robust preparation of cold {88}^Sr atoms in a second stage magneto-optical trap (MOT) is achieved.
△ Less
Submitted 29 March, 2015;
originally announced March 2015.
-
A transportable strontium optical lattice clock
Authors:
N. Poli,
M. Schioppo,
S. Vogt,
St. Falke,
U. Sterr,
Ch. Lisdat,
G. M. Tino
Abstract:
We report on a transportable optical clock, based on laser-cooled strontium atoms trapped in an optical lattice. The experimental apparatus is composed of a compact source of ultra-cold strontium atoms including a compact cooling laser set-up and a transportable ultra-stable laser for interrogating the optical clock transition. The whole setup (excluding electronics) fits within a volume of less t…
▽ More
We report on a transportable optical clock, based on laser-cooled strontium atoms trapped in an optical lattice. The experimental apparatus is composed of a compact source of ultra-cold strontium atoms including a compact cooling laser set-up and a transportable ultra-stable laser for interrogating the optical clock transition. The whole setup (excluding electronics) fits within a volume of less than 2 m$^3$. The high degree of operation reliability of both systems allowed the spectroscopy of the clock transition to be performed with 10 Hz resolution. We estimate an uncertainty of the clock of $7\times10^{-15}$.
△ Less
Submitted 17 September, 2014; v1 submitted 16 September, 2014;
originally announced September 2014.
-
Coherent optical frequency transfer at 5e-19 over a doubled 642 km fiber link
Authors:
D. Calonico,
E. K. Bertacco,
C. E. Calosso,
C. Clivati,
G. A. Costanzo,
M. Frittelli,
A. Godone,
A. Mura,
N. Poli,
D. V. Sutyrin,
G. Tino,
M. E. Zucco,
F. Levi
Abstract:
To significantly improve the frequency references used in radio-astronomy and precision measurements in atomic physics, we provide frequency dissemination through a 642 km coherent optical fiber link, that will be also part of a forthcoming European network of optical links. We obtained a resolution of 3e-19 at 1000 s on the frequency transfer, and an accuracy of 5e-19. The ultimate link performan…
▽ More
To significantly improve the frequency references used in radio-astronomy and precision measurements in atomic physics, we provide frequency dissemination through a 642 km coherent optical fiber link, that will be also part of a forthcoming European network of optical links. We obtained a resolution of 3e-19 at 1000 s on the frequency transfer, and an accuracy of 5e-19. The ultimate link performance has been evaluated by doubling the link to 1284 km, demonstrating a new characterization technique based on the double round-trip on a single fiber. The arming of a second fiber is avoided: this is beneficial to long hauls realizations in view of a continental fiber network for frequency and time metrology. The data analysis is based on the Allan deviation; its expression is theoretically derived for the observed noise power spectrum, which is seldom found in the literature.
△ Less
Submitted 1 July, 2014; v1 submitted 1 April, 2014;
originally announced April 2014.
-
Test of Einstein Equivalence Principle for 0-spin and half-integer-spin atoms: Search for spin-gravity coupling effects
Authors:
M. G. Tarallo,
T. Mazzoni,
N. Poli,
D. V. Sutyrin,
X. Zhang,
G. M. Tino
Abstract:
We report on a conceptually new test of the equivalence principle performed by measuring the acceleration in Earth's gravity field of two isotopes of strontium atoms, namely, the bosonic $^{88}$Sr isotope which has no spin vs the fermionic $^{87}$Sr isotope which has a half-integer spin. The effect of gravity upon the two atomic species has been probed by means of a precision differential measurem…
▽ More
We report on a conceptually new test of the equivalence principle performed by measuring the acceleration in Earth's gravity field of two isotopes of strontium atoms, namely, the bosonic $^{88}$Sr isotope which has no spin vs the fermionic $^{87}$Sr isotope which has a half-integer spin. The effect of gravity upon the two atomic species has been probed by means of a precision differential measurement of the Bloch frequency for the two atomic matter waves in a vertical optical lattice. We obtain the values $η= (0.2\pm 1.6)\times10^{-7}$ for the Eötvös parameter and $k=(0.5\pm1.1)\times10^{-7}$ for the coupling between nuclear spin and gravity. This is the first reported experimental test of the equivalence principle for bosonic and fermionic particles and opens a new way to the search for the predicted spin-gravity coupling effects.
△ Less
Submitted 23 June, 2014; v1 submitted 5 March, 2014;
originally announced March 2014.
-
Optical atomic clocks
Authors:
N. Poli,
C. W. Oates,
P. Gill,
G. M. Tino
Abstract:
In the last ten years extraordinary results in time and frequency metrology have been demonstrated. Frequency-stabilization techniques for continuous-wave lasers and femto-second optical frequency combs have enabled a rapid development of frequency standards based on optical transitions in ultra-cold neutral atoms and trapped ions. As a result, today's best performing atomic clocks tick at an opti…
▽ More
In the last ten years extraordinary results in time and frequency metrology have been demonstrated. Frequency-stabilization techniques for continuous-wave lasers and femto-second optical frequency combs have enabled a rapid development of frequency standards based on optical transitions in ultra-cold neutral atoms and trapped ions. As a result, today's best performing atomic clocks tick at an optical rate and allow scientists to perform high-resolution measurements with a precision approaching a few parts in $10^{18}$. This paper reviews the history and the state of the art in optical-clock research and addresses the implementation of optical clocks in a possible future redefinition of the SI second as well as in tests of fundamental physics.
△ Less
Submitted 13 January, 2014; v1 submitted 10 January, 2014;
originally announced January 2014.
-
Robust frequency stabilization of multiple spectroscopy lasers with large and tunable offset frequencies
Authors:
Alexander Nevsky,
Soroosh Alighanbari,
Qun-Feng Chen,
Ingo Ernsting,
Sergey Vasilyev,
Stephan Schiller,
Geoffrey Barwood,
Patrick Gill,
Nicola Poli,
Guglielmo M. Tino
Abstract:
We demonstrate a compact and robust device for simultaneous absolute frequency stabilization of three diode lasers whose carrier frequencies can be chosen freely relative to the reference. A rigid ULE multi-cavity block is employed, and, for each laser, the sideband locking technique is applied. Useful features of the system are a negligible lock error, computer control of frequency offset, wide r…
▽ More
We demonstrate a compact and robust device for simultaneous absolute frequency stabilization of three diode lasers whose carrier frequencies can be chosen freely relative to the reference. A rigid ULE multi-cavity block is employed, and, for each laser, the sideband locking technique is applied. Useful features of the system are a negligible lock error, computer control of frequency offset, wide range of frequency offset, simple construction, and robust operation. One concrete application is as a stabilization unit for the cooling and trapping lasers of a neutral atom lattice clock. The device significantly supports and improves the operation of the clock. The laser with the most stringent requirements imposed by this application is stabilized to a linewidth of 70 Hz, and a residual frequency drift less than 0.5 Hz/s. The carrier optical frequency can be tuned over 350 MHz while in lock.
△ Less
Submitted 3 October, 2013; v1 submitted 16 September, 2013;
originally announced September 2013.
-
Distributed Raman optical amplification in phase coherent transfer of optical frequencies
Authors:
Cecilia Clivati,
Gabriele Bolognini,
Davide Calonico,
Stefano Faralli,
Filippo Levi,
Alberto Mura,
Nicola Poli
Abstract:
We describe the application of Raman Optical-fiber Amplification (ROA) for the phase coherent transfer of optical frequencies in an optical fiber link. ROA uses the transmission fiber itself as a gain medium for bi-directional coherent amplification. In a test setup we evaluated the ROA in terms of on-off gain, signal-to-noise ratio, and phase noise added to the carrier. We transferred a laser fre…
▽ More
We describe the application of Raman Optical-fiber Amplification (ROA) for the phase coherent transfer of optical frequencies in an optical fiber link. ROA uses the transmission fiber itself as a gain medium for bi-directional coherent amplification. In a test setup we evaluated the ROA in terms of on-off gain, signal-to-noise ratio, and phase noise added to the carrier. We transferred a laser frequency in a 200 km optical fiber link with an additional 16 dB fixed attenuator (equivalent to 275 km of fiber on a single span), and evaluated both co-propagating and counter-propagating amplification pump schemes, demonstrating nonlinear effects limiting the co-propagating pump configuration. The frequency at the remote end has a fractional frequency instability of 3e-19 over 1000 s with the optical fiber link noise compensation.
△ Less
Submitted 16 November, 2012;
originally announced November 2012.
-
Coherent control of quantum transport: modulation-enhanced phase detection and band spectroscopy
Authors:
Marco G. Tarallo,
Nicola Poli,
F. Y. Wang,
Guglielmo M. Tino
Abstract:
Amplitude modulation of a tilted optical lattice can be used to steer the quantum transport of matter wave packets in a very flexible way. This allows the experimental study of the phase sensitivity in a multimode interferometer based on delocalization-enhanced Bloch oscillations and to probe the band structure modified by a constant force.
Amplitude modulation of a tilted optical lattice can be used to steer the quantum transport of matter wave packets in a very flexible way. This allows the experimental study of the phase sensitivity in a multimode interferometer based on delocalization-enhanced Bloch oscillations and to probe the band structure modified by a constant force.
△ Less
Submitted 25 October, 2012;
originally announced October 2012.
-
A compact and efficient strontium oven for laser-cooling experiments
Authors:
Marco Schioppo,
Nicola Poli,
Marco Prevedelli,
Stephan Falke,
Christian Lisdat,
Uwe Sterr,
Guglielmo Maria Tino
Abstract:
Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0\times10^13 s^-1 cm^-2 at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, el…
▽ More
Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0\times10^13 s^-1 cm^-2 at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.
△ Less
Submitted 25 September, 2012;
originally announced September 2012.
-
Delocalization-enhanced Bloch oscillations and driven resonant tunneling in optical lattices for precision force measurements
Authors:
M. G. Tarallo,
A. Alberti,
N. Poli,
M. L. Chiofalo,
F. -Y. Wang,
G. M. Tino
Abstract:
In this paper we describe and compare different methods used for accurate determination of forces acting on matter-wave packets in optical lattices. The quantum interference nature responsible for the production of both Bloch oscillations and coherent delocalization is investigated in detail. We study conditions for optimal detection of Bloch oscillation for a thermal ensemble of cold atoms with a…
▽ More
In this paper we describe and compare different methods used for accurate determination of forces acting on matter-wave packets in optical lattices. The quantum interference nature responsible for the production of both Bloch oscillations and coherent delocalization is investigated in detail. We study conditions for optimal detection of Bloch oscillation for a thermal ensemble of cold atoms with a large velocity spread. We report on the experimental observation of resonant tunneling in an amplitude-modulated (AM) optical lattice up to the sixth harmonic with Fourier-limited linewidth. We then explore the fundamental and technical phenomena which limit both the sensitivity and the final accuracy of the atomic force sensor at 10^{-7} precision level [1], with an analysis of the coherence time of the system and addressing few simple setup changes to go beyond the current accuracy.
△ Less
Submitted 9 July, 2012;
originally announced July 2012.
-
The Space Optical Clocks Project: Development of high-performance transportable and breadboard optical clocks and advanced subsystems
Authors:
S. Schiller,
A. Görlitz,
A. Nevsky,
S. Alighanbari,
S. Vasilyev,
C. Abou-Jaoudeh,
G. Mura,
T. Franzen,
U. Sterr,
S. Falke,
Ch. Lisdat,
E. Rasel,
A. Kulosa,
S. Bize,
J. Lodewyck,
G. M. Tino,
N. Poli,
M. Schioppo,
K. Bongs,
Y. Singh,
P. Gill,
G. Barwood,
Y. Ovchinnikov,
J. Stuhler,
W. Kaenders
, et al. (6 additional authors not shown)
Abstract:
The use of ultra-precise optical clocks in space ("master clocks") will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (mapping of the gravitational potential of Earth), and astronomy (providing local oscillators for radio…
▽ More
The use of ultra-precise optical clocks in space ("master clocks") will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (mapping of the gravitational potential of Earth), and astronomy (providing local oscillators for radio ranging and interferometry in space). Within the ELIPS-3 program of ESA, the "Space Optical Clocks" (SOC) project aims to install and to operate an optical lattice clock on the ISS towards the end of this decade, as a natural follow-on to the ACES mission, improving its performance by at least one order of magnitude. The payload is planned to include an optical lattice clock, as well as a frequency comb, a microwave link, and an optical link for comparisons of the ISS clock with ground clocks located in several countries and continents. Undertaking a necessary step towards optical clocks in space, the EU-FP7-SPACE-2010-1 project no. 263500 (SOC2) (2011-2015) aims at two "engineering confidence", accurate transportable lattice optical clock demonstrators having relative frequency instability below 1\times10^-15 at 1 s integration time and relative inaccuracy below 5\times10^-17. This goal performance is about 2 and 1 orders better in instability and inaccuracy, respectively, than today's best transportable clocks. The devices will be based on trapped neutral ytterbium and strontium atoms. One device will be a breadboard. The two systems will be validated in laboratory environments and their performance will be established by comparison with laboratory optical clocks and primary frequency standards. In this paper we present the project and the results achieved during the first year.
△ Less
Submitted 17 June, 2012;
originally announced June 2012.
-
Precision measurement of gravity with cold atoms in an optical lattice and comparison with a classical gravimeter
Authors:
N. Poli,
F. -Y. Wang,
M. G. Tarallo,
A. Alberti,
M. Prevedelli,
G. M. Tino
Abstract:
We report on a high precision measurement of gravitational acceleration using ultracold strontium atoms trapped in a vertical optical lattice. Using amplitude modulation of the lattice intensity, an uncertainty $Δg /g \approx 10^{-7}$ was reached by measuring at the 5$^{th}$ harmonic of the Bloch oscillation frequency. After a careful analysis of systematic effects, the value obtained with this mi…
▽ More
We report on a high precision measurement of gravitational acceleration using ultracold strontium atoms trapped in a vertical optical lattice. Using amplitude modulation of the lattice intensity, an uncertainty $Δg /g \approx 10^{-7}$ was reached by measuring at the 5$^{th}$ harmonic of the Bloch oscillation frequency. After a careful analysis of systematic effects, the value obtained with this microscopic quantum system is consistent with the one we measured with a classical absolute gravimeter at the same location. This result is of relevance for the recent interpretation of related experiments as tests of gravitational redshift and opens the way to new tests of gravity at micrometer scale.
△ Less
Submitted 11 October, 2010;
originally announced October 2010.
-
A high stability semiconductor laser system for a $^{88}$Sr-based optical lattice clock
Authors:
Marco. G. Tarallo,
Nicola Poli,
Marco Schioppo,
Guglielmo M. Tino
Abstract:
We describe a frequency stabilized diode laser at 698 nm used for high resolution spectroscopy of the 1S0-3P0 strontium clock transition. For the laser stabilization we use state-of-the-art symmetrically suspended optical cavities optimized for very low thermal noise at room temperature. Two-stage frequency stabilization to high finesse optical cavities results in measured laser frequency noise ab…
▽ More
We describe a frequency stabilized diode laser at 698 nm used for high resolution spectroscopy of the 1S0-3P0 strontium clock transition. For the laser stabilization we use state-of-the-art symmetrically suspended optical cavities optimized for very low thermal noise at room temperature. Two-stage frequency stabilization to high finesse optical cavities results in measured laser frequency noise about a factor of three above the cavity thermal noise between 2 Hz and 11 Hz. With this system, we demonstrate high resolution remote spectroscopy on the 88Sr clock transition by transferring the laser output over a phase-noise-compensated 200 m-long fiber link between two separated laboratories. Our dedicated fiber link ensures a transfer of the optical carrier with frequency stability of 7 \cdot 10^{-18} after 100 s integration time, which could enable the observation of the strontium clock transition with an atomic Q of 10^{14}. Furthermore, with an eye towards the development of transportable optical clocks, we investigate how the complete laser system (laser+optics+cavity) can be influenced by environmental disturbances in terms of both short- and long-term frequency stability.
△ Less
Submitted 4 June, 2010;
originally announced June 2010.
-
A simplified optical lattice clock
Authors:
N. Poli,
M. G. Tarallo,
M. Schioppo,
C. W. Oates,
G. M. Tino
Abstract:
Existing optical lattice clocks demonstrate a high level of performance, but they remain complex experimental devices. In order to address a wider range of applications including those requiring transportable devices, it will be necessary to simplify the laser systems and reduce the amount of support hardware. Here we demonstrate two significant steps towards this goal: demonstration of clock si…
▽ More
Existing optical lattice clocks demonstrate a high level of performance, but they remain complex experimental devices. In order to address a wider range of applications including those requiring transportable devices, it will be necessary to simplify the laser systems and reduce the amount of support hardware. Here we demonstrate two significant steps towards this goal: demonstration of clock signals from a Sr lattice clock based solely on semiconductor laser technology, and a method for finding the clock transition (based on a coincidence in atomic wavelengths) that removes the need for extensive frequency metrology hardware. Moreover, the unexpected high contrast in the signal revealed evidence of density dependent collisions in Sr-88 atoms.
△ Less
Submitted 22 December, 2008;
originally announced December 2008.
-
A quantum sensor for atom-surface interactions below 10 $μ$m
Authors:
F. Sorrentino,
A. Alberti,
G. Ferrari,
V. V. Ivanov,
N. Poli,
M. Schioppo,
G. M. Tino
Abstract:
We report about the realization of a quantum device for force sensing at micrometric scale. We trap an ultracold $^{88}$Sr atomic cloud with a 1-D optical lattice, then we place the atomic sample close to a test surface using the same optical lattice as an elevator. We demonstrate precise positioning of the sample at the $μ$m scale. By observing the Bloch oscillations of atoms into the 1-D optic…
▽ More
We report about the realization of a quantum device for force sensing at micrometric scale. We trap an ultracold $^{88}$Sr atomic cloud with a 1-D optical lattice, then we place the atomic sample close to a test surface using the same optical lattice as an elevator. We demonstrate precise positioning of the sample at the $μ$m scale. By observing the Bloch oscillations of atoms into the 1-D optical standing wave, we are able to measure the total force on the atoms along the lattice axis, with a spatial resolution of few microns. We also demonstrate a technique for transverse displacement of the atoms, allowing to perform measurements near either transparent or reflective test surfaces. In order to reduce the minimum distance from the surface, we compress the longitudinal size of the atomic sample by means of an optical tweezer. Such system is suited for studies of atom-surface interaction at short distance, such as measurement of Casimir force and search for possible non-Newtonian gravity effects.
△ Less
Submitted 6 November, 2008;
originally announced November 2008.
-
Frequency evaluation of the doubly forbidden $^1S_0\to ^3P_0$ transition in bosonic $^{174}$Yb
Authors:
N. Poli,
Z. W. Barber,
N. D. Lemke,
C. W. Oates,
L. S. Ma,
J. E. Stalnaker,
T. M. Fortier,
S. A. Diddams,
L. Hollberg,
J. C. Bergquist,
A. Brusch,
S. Jefferts,
T. Heavner,
T. Parker
Abstract:
We report an uncertainty evaluation of an optical lattice clock based on the $^1S_0\leftrightarrow^3P_0$ transition in the bosonic isotope $^{174}$Yb by use of magnetically induced spectroscopy. The absolute frequency of the $^1S_0\leftrightarrow^3P_0$ transition has been determined through comparisons with optical and microwave standards at NIST. The weighted mean of the evaluations is $ν$(…
▽ More
We report an uncertainty evaluation of an optical lattice clock based on the $^1S_0\leftrightarrow^3P_0$ transition in the bosonic isotope $^{174}$Yb by use of magnetically induced spectroscopy. The absolute frequency of the $^1S_0\leftrightarrow^3P_0$ transition has been determined through comparisons with optical and microwave standards at NIST. The weighted mean of the evaluations is $ν$($^{174}$Yb)=518 294 025 309 217.8(0.9) Hz. The uncertainty due to systematic effects has been reduced to less than 0.8 Hz, which represents $1.5\times10^{-15}$ in fractional frequency.
△ Less
Submitted 31 March, 2008;
originally announced March 2008.
-
Optical Lattice Induced Light Shifts in an Yb Atomic Clock
Authors:
Z. W. Barber,
J. E. Stalnaker,
N. D. Lemke,
N. Poli,
C. W. Oates,
T. M. Fortier,
S. A. Diddams,
L. Hollberg,
C. W. Hoyt
Abstract:
We present an experimental study of the lattice induced light shifts on the 1S_0-3P_0 optical clock transition (v_clock~518 THz) in neutral ytterbium. The ``magic'' frequency, v_magic, for the 174Yb isotope was determined to be 394 799 475(35)MHz, which leads to a first order light shift uncertainty of 0.38 Hz on the 518 THz clock transition. Also investigated were the hyperpolarizability shifts…
▽ More
We present an experimental study of the lattice induced light shifts on the 1S_0-3P_0 optical clock transition (v_clock~518 THz) in neutral ytterbium. The ``magic'' frequency, v_magic, for the 174Yb isotope was determined to be 394 799 475(35)MHz, which leads to a first order light shift uncertainty of 0.38 Hz on the 518 THz clock transition. Also investigated were the hyperpolarizability shifts due to the nearby 6s6p 3P_0 - 6s8p 3P_0, 6s8p 3P_2, and 6s5f 3F_2 two-photon resonances at 759.708 nm, 754.23 nm, and 764.95 nm respectively. By tuning the lattice frequency over the two-photon resonances and measuring the corresponding clock transition shifts, the hyperpolarizability shift was estimated to be 170(33) mHz for a linear polarized, 50 uK deep, lattice at the magic wavelength. In addition, we have confirmed that a circularly polarized lattice eliminates the J=0 - J=0 two-photon resonance. These results indicate that the differential polarizability and hyperpolarizability frequency shift uncertainties in a Yb lattice clock could be held to well below 10^-17.
△ Less
Submitted 1 February, 2008;
originally announced February 2008.
-
Sr lattice clock at 1x10^{-16} fractional uncertainty by remote optical evaluation with a Ca clock
Authors:
A. D. Ludlow,
T. Zelevinsky,
G. K. Campbell,
S. Blatt,
M. M. Boyd,
M. H. G. de Miranda,
M. J. Martin,
J. W. Thomsen,
S. M. Foreman,
Jun Ye,
T. M. Fortier,
J. E. Stalnaker,
S. A. Diddams,
Y. Le Coq,
Z. W. Barber,
N. Poli,
N. D. Lemke,
K. M. Beck,
C. W. Oates
Abstract:
Optical atomic clocks promise timekeeping at the highest precision and accuracy, owing to their high operating frequencies. Rigorous evaluations of these clocks require direct comparisons between them. We have realized a high-performance remote comparison of optical clocks over km-scale urban distances, a key step for development, dissemination, and application of these optical standards. Throug…
▽ More
Optical atomic clocks promise timekeeping at the highest precision and accuracy, owing to their high operating frequencies. Rigorous evaluations of these clocks require direct comparisons between them. We have realized a high-performance remote comparison of optical clocks over km-scale urban distances, a key step for development, dissemination, and application of these optical standards. Through this remote comparison and a proper design of lattice-confined neutral atoms for clock operation, we evaluate the uncertainty of a strontium (Sr) optical lattice clock at the 1x10-16 fractional level, surpassing the best current evaluations of cesium (Cs) primary standards. We also report on the observation of density-dependent effects in the spin-polarized fermionic sample and discuss the current limiting effect of blackbody radiation-induced frequency shifts.
△ Less
Submitted 28 March, 2008; v1 submitted 28 January, 2008;
originally announced January 2008.
-
Spin injection and relaxation in a mesoscopic superconductor
Authors:
N. Poli,
J. P. Morten,
M. Urech,
Arne Brataas,
D. B. Haviland,
V. Korenivski
Abstract:
We study spin accumulation and spin relaxation in a superconducting nanowire. Spins are injected and detected by using a set of magnetic tunnel contact electrodes, closely spaced along the nanowire. We observe a giant enhancement of the spin accumulation of up to five orders of magnitude on transition into the superconducting state, consistent with the expected changes in the density of states.…
▽ More
We study spin accumulation and spin relaxation in a superconducting nanowire. Spins are injected and detected by using a set of magnetic tunnel contact electrodes, closely spaced along the nanowire. We observe a giant enhancement of the spin accumulation of up to five orders of magnitude on transition into the superconducting state, consistent with the expected changes in the density of states. The spin relaxation length decreases by an order of magnitude from its value in the normal state. These measurements combined with our theoretical model, allow us to distinguish the individual spin flip mechanisms present in the transport channel. Our conclusion is that magnetic impurities rather than spin-orbit coupling dominate spin-flip scattering in the superconducting state.
△ Less
Submitted 12 December, 2007; v1 submitted 19 July, 2007;
originally announced July 2007.
-
Laser cooling and trapping of atomic strontium for ultracold atom physics, high-precision spectroscopy and quantum sensors
Authors:
F. Sorrentino,
G. Ferrari,
N. Poli,
R. Drullinger,
G. M. Tino
Abstract:
This review describes the production of atomic strontium samples at ultra-low temperature and at high phase-space density, and their possible use for physical studies and applications. We describe the process of loading a magneto-optical trap from an atomic beam and preparing the sample for high precision measurements. Particular emphasis is given to the applications of ultracold Sr samples, spa…
▽ More
This review describes the production of atomic strontium samples at ultra-low temperature and at high phase-space density, and their possible use for physical studies and applications. We describe the process of loading a magneto-optical trap from an atomic beam and preparing the sample for high precision measurements. Particular emphasis is given to the applications of ultracold Sr samples, spanning from optical frequency metrology to force sensing at micrometer scale.
△ Less
Submitted 15 September, 2006;
originally announced September 2006.
-
Cooling and trapping of ultra-cold strontium isotopic mixtures
Authors:
N. Poli,
R. E. Drullinger,
G. Ferrari,
J. Leonard,
F. Sorrentino,
G. M. Tino
Abstract:
We present the simultaneous cooling and trapping of an isotopic mixture in a magneto-optical trap and we describe the transfer of the mixture into a conservative, far-off resonant dipole trap. The mixture is prepared with a new technique that applies to intermediate and heavy alkaline earth like atoms. In this work, 88Sr and 86Sr are simultaneously loaded first into the magneto-optical trap oper…
▽ More
We present the simultaneous cooling and trapping of an isotopic mixture in a magneto-optical trap and we describe the transfer of the mixture into a conservative, far-off resonant dipole trap. The mixture is prepared with a new technique that applies to intermediate and heavy alkaline earth like atoms. In this work, 88Sr and 86Sr are simultaneously loaded first into the magneto-optical trap operated on the 1S0-3P1 spin-forbidden line at 689 nm, and then transferred into the dipole trap. We observe fast inter-species thermalization in the dipole trap which allows one to set a lower bound on the 88Sr-86Sr elastic cross section.
△ Less
Submitted 24 August, 2006;
originally announced August 2006.
-
Long-lived Bloch oscillations with bosonic Sr atoms and application to gravity measurement at micrometer scale
Authors:
G. Ferrari,
N. Poli,
F. Sorrentino,
G. M. Tino
Abstract:
We report on the observation of Bloch oscillations on the unprecedented time scale of severalseconds. The experiment is carried out with ultra-cold bosonic strontium-88 loaded into a vertical optical standing wave. The negligible atom-atom elastic cross section and the absence of spin makes $^{88}$Sr an almost ideal Bose gas insensitive to typical mechanisms of decoherence due to thermalization…
▽ More
We report on the observation of Bloch oscillations on the unprecedented time scale of severalseconds. The experiment is carried out with ultra-cold bosonic strontium-88 loaded into a vertical optical standing wave. The negligible atom-atom elastic cross section and the absence of spin makes $^{88}$Sr an almost ideal Bose gas insensitive to typical mechanisms of decoherence due to thermalization and to external stray fields. The small size enables precision measurements of forces at micrometer scale. This is a challenge in physics for studies of surfaces, Casimir effects, and searches for deviations from Newtonian gravity predicted by theories beyond the standard model.
△ Less
Submitted 2 May, 2006;
originally announced May 2006.
-
Spin flip scattering at Al surfaces
Authors:
N. Poli,
M. Urech,
V. Korenivski,
D. B. Haviland
Abstract:
Non-local measurements are performed on a multi terminal device to $in-situ$ determine the spin diffusion length and in combination with resistivity measurements also the spin relaxation time in Al films. By varying the thickness of Al we determine the contribution to spin relaxation from surface scattering. From the temperature dependence of the spin diffusion length it is established that the…
▽ More
Non-local measurements are performed on a multi terminal device to $in-situ$ determine the spin diffusion length and in combination with resistivity measurements also the spin relaxation time in Al films. By varying the thickness of Al we determine the contribution to spin relaxation from surface scattering. From the temperature dependence of the spin diffusion length it is established that the spin relaxation is impurity dominated at low temperature. A comparison of the spin and momentum relaxation lengths for different thicknesses reveals that the spin flip scattering at the surfaces is weak compared to that within the bulk of the Al films.
△ Less
Submitted 6 February, 2006;
originally announced February 2006.
-
Enhanced spin accumulation in a superconductor
Authors:
M. Urech,
J. Johansson,
N. Poli,
V. Korenivski,
D. B. Haviland
Abstract:
A lateral array of ferromagnetic tunnel junctions is used to inject and detect non-equilibrium quasi-particle spin distribution in a superconducting strip made of Al. The strip width and thickness is kept below the quasi particle spin diffusion length in Al. Non-local measurements in multiple parallel and antiparallel magnetic states of the detectors are used to in-situ determine the quasi-parti…
▽ More
A lateral array of ferromagnetic tunnel junctions is used to inject and detect non-equilibrium quasi-particle spin distribution in a superconducting strip made of Al. The strip width and thickness is kept below the quasi particle spin diffusion length in Al. Non-local measurements in multiple parallel and antiparallel magnetic states of the detectors are used to in-situ determine the quasi-particle spin diffusion length. A very large increase in the spin accumulation in the superconducting state compared to that in the normal state is observed and is attributed to a diminishing of the quasi-particle population by opening of the gap below the transition temperature.
△ Less
Submitted 14 February, 2006; v1 submitted 6 February, 2006;
originally announced February 2006.
-
Direct demonstration of decoupling of spin and charge currents in nanostructures
Authors:
M. Urech,
V. Korenivski,
N. Poli,
D. B. Haviland
Abstract:
The notion of decoupling of spin and charge currents is one of the basic principles underlying the rapidly expanding feld of Spintronics. However, no direct demonstration of the phenomenon exists. We report a novel measurement, in which a non-equilibrium spin population is created by a point-like injection of current from a ferromagnet across a tunnel barrier into a one dimensional spin channel,…
▽ More
The notion of decoupling of spin and charge currents is one of the basic principles underlying the rapidly expanding feld of Spintronics. However, no direct demonstration of the phenomenon exists. We report a novel measurement, in which a non-equilibrium spin population is created by a point-like injection of current from a ferromagnet across a tunnel barrier into a one dimensional spin channel, and detected differentially by a pair of ferromagnetic electrodes placed symmetrically about the injection point. We demonstrate that the spin current is strictly isotropic about the injection point and, therefore, completely decoupled from the uni-directional charge current.
△ Less
Submitted 14 February, 2006; v1 submitted 6 February, 2006;
originally announced February 2006.
-
Cooling of Sr to high phase-space density by laser and sympathetic cooling in isotopic mixtures
Authors:
G. Ferrari,
R. E. Drullinger,
N. Poli,
F. Sorrentino,
G. M. Tino
Abstract:
Based on an experimental study of two-body and three-body collisions in ultracold strontium samples, a novel optical-sympathetic cooling method in isotopic mixtures is demonstrated. Without evaporative cooling, a phase-space density of $6\times10^{-2}$ is obtained with a high spatial density that should allow to overcome the difficulties encountered so far to reach quantum degeneracy for Sr atom…
▽ More
Based on an experimental study of two-body and three-body collisions in ultracold strontium samples, a novel optical-sympathetic cooling method in isotopic mixtures is demonstrated. Without evaporative cooling, a phase-space density of $6\times10^{-2}$ is obtained with a high spatial density that should allow to overcome the difficulties encountered so far to reach quantum degeneracy for Sr atoms.
△ Less
Submitted 12 January, 2006;
originally announced January 2006.
-
Precision frequency measurement of visible intercombination lines of strontium
Authors:
G. Ferrari,
P. Cancio,
R. Drullinger,
G. Giusfredi,
N. Poli,
M. Prevedelli,
C. Toninelli,
G. M. Tino
Abstract:
We report the direct frequency measurement of the visible 5s$^2$ $^1$S$_0$-5s 5p$^3$P$_1$ intercombination line of strontium that is considered a possible candidate for a future optical frequency standard. The frequency of a cavity-stabilized laser is locked to the saturated fluorescence in a thermal Sr atomic beam and is measured with an optical-frequency comb-generator referenced to the SI sec…
▽ More
We report the direct frequency measurement of the visible 5s$^2$ $^1$S$_0$-5s 5p$^3$P$_1$ intercombination line of strontium that is considered a possible candidate for a future optical frequency standard. The frequency of a cavity-stabilized laser is locked to the saturated fluorescence in a thermal Sr atomic beam and is measured with an optical-frequency comb-generator referenced to the SI second through a GPS signal. The $^{88}$Sr transition is measured to be at 434 829 121 311 (10) kHz. We measure also the $^{88}$Sr-$^{86}$Sr isotope shift to be 163 817.4 (0.2) kHz.
△ Less
Submitted 6 November, 2003; v1 submitted 1 September, 2003;
originally announced September 2003.
-
Cooling atoms in an optical trap by selective parametric excitation
Authors:
N. Poli,
R. J. Brecha,
G. Roati,
G. Modugno
Abstract:
We demonstrate the possibility of energy-selective removal of cold atoms from a tight optical trap by means of parametric excitation of the trap vibrational modes. Taking advantage of the anharmonicity of the trap potential, we selectively remove the most energetic trapped atoms or excite those at the bottom of the trap by tuning the parametric modulation frequency. This process, which had been…
▽ More
We demonstrate the possibility of energy-selective removal of cold atoms from a tight optical trap by means of parametric excitation of the trap vibrational modes. Taking advantage of the anharmonicity of the trap potential, we selectively remove the most energetic trapped atoms or excite those at the bottom of the trap by tuning the parametric modulation frequency. This process, which had been previously identified as a possible source of heating, also appears to be a robust way for forcing evaporative cooling in anharmonic traps.
△ Less
Submitted 10 April, 2001;
originally announced April 2001.
-
Anharmonic parametric excitation in optical lattices
Authors:
R. Jáuregui,
N. Poli,
G. Roati,
G. Modugno
Abstract:
We study both experimentally and theoretically the losses induced by parametric excitation in far-off-resonance optical lattices. The atoms confined in a 1D sinusoidal lattice present an excitation spectrum and dynamics substantially different from those expected for a harmonic potential. We develop a model based on the actual atomic Hamiltonian in the lattice and we introduce semiempirically a…
▽ More
We study both experimentally and theoretically the losses induced by parametric excitation in far-off-resonance optical lattices. The atoms confined in a 1D sinusoidal lattice present an excitation spectrum and dynamics substantially different from those expected for a harmonic potential. We develop a model based on the actual atomic Hamiltonian in the lattice and we introduce semiempirically a broadening of the width of lattice energy bands which can physically arise from inhomogeneities and fluctuations of the lattice, and also from atomic collisions. The position and strength of the parametric resonances and the evolution of the number of trapped atoms are satisfactorily described by our model.
△ Less
Submitted 16 March, 2001;
originally announced March 2001.
