Jump to content

Gas-discharge lamp

From Wikipedia, the free encyclopedia

Germicidal lamps are simple low-pressure mercury vapor discharges in a fused quartz envelope.

Gas-discharge lamps are a family of artificial light sources that generate light by sending an electric discharge through an ionized gas, a plasma.

Typically, such lamps use a noble gas (argon, neon, krypton, and xenon) or a mixture of these gases. Some include additional substances, such as mercury, sodium, and metal halides, which are vaporized during start-up to become part of the gas mixture.

Single-ended self-starting lamps are insulated with a mica disc and contained in a borosilicate glass gas discharge tube (arc tube) and a metal cap.[1][2] They include the sodium-vapor lamp that is the gas-discharge lamp in street lighting.[3][4][1][2]

In operation, some of the electrons are forced to leave the atoms of the gas near the anode by the electric field applied between the two electrodes, leaving these atoms positively ionized. The free electrons thus released flow to the anode, while the cations thus formed are accelerated by the electric field and flow towards the cathode.

The ions typically cover only a very short distance before colliding with neutral gas atoms, which give the ions their electrons. The atoms which lost an electron during the collisions ionize and speed toward the cathode while the ions which gained an electron during the collisions return to a lower energy state, releasing energy in the form of photons. Light of a characteristic frequency is thus emitted. In this way, electrons are relayed through the gas from the cathode to the anode.

The color of the light produced depends on the emission spectra of the atoms making up the gas, as well as the pressure of the gas, current density, and other variables. Gas discharge lamps can produce a wide range of colors. Some lamps produce ultraviolet radiation which is converted to visible light by a fluorescent coating on the inside of the lamp's glass surface. The fluorescent lamp is perhaps the best known gas-discharge lamp.

Compared to incandescent lamps, gas-discharge lamps offer higher efficiency,[5][6] but are more complicated to manufacture and most exhibit negative resistance, causing the resistance in the plasma to decrease as the current flow increases. Therefore, they usually require auxiliary electronic equipment such as ballasts to control current flow through the gas, preventing current runaway (arc flash).

Some gas-discharge lamps also have a perceivable start-up time to achieve their full light output. Still, owing to their greater efficiency, gas-discharge lamps were preferred over incandescent lights in many lighting applications, until recent improvements in LED lamp technology. [citation needed]

History

[edit]

The history of gas-discharge lamps began in 1675 when the French astronomer Jean Picard observed that the empty space in his mercury barometer glowed as the mercury jiggled while he was carrying the barometer.[7] Investigators, including Francis Hauksbee, tried to determine the cause of the phenomenon. Hauksbee first demonstrated a gas-discharge lamp in 1705.[8] He showed that an evacuated or partially evacuated glass globe, in which he placed a small amount of mercury, while charged by static electricity could produce a light bright enough to read by. The phenomenon of electric arc was first described by Vasily V. Petrov in 1802.[9][10][11] In 1809, Sir Humphry Davy demonstrated the electric arc at the Royal Institution of Great Britain.[12][13] Since then, discharge light sources have been researched because they create light from electricity considerably more efficiently than incandescent light bulbs.

The father of the low-pressure gas discharge tube was German glassblower Heinrich Geissler, who beginning in 1857 constructed colorful artistic cold cathode tubes with different gases in them which glowed with many different colors, called Geissler tubes. It was found that inert gases such as the noble gases neon, argon, krypton or xenon, as well as carbon dioxide worked well in tubes. This technology was commercialized by the French engineer Georges Claude in 1910 and became neon lighting, used in neon signs.

The introduction of the metal vapor lamp, including various metals within the discharge tube, was a later advance. The heat of the gas discharge vaporizes some of the metal and the discharge is then produced almost exclusively by the metal vapor. The usual metals are sodium and mercury owing to their visible spectrum emission.

One hundred years of research later led to lamps without electrodes which are instead energized by microwave or radio-frequency sources. In addition, light sources of much lower output have been created, extending the applications of discharge lighting to home or indoor use.

Jules Verne's "Ruhmkorff lamp"

The "Ruhmkorff" lamp

[edit]

Ruhmkorff lamps were an early form of portable electric lamp, named after Heinrich Daniel Ruhmkorff and first used in the 1860s. The lamp consisted of a Geissler tube that was excited by a battery-powered Ruhmkorff induction coil; an early transformer capable of converting DC currents of low voltage into rapid high-voltage pulses. Initially the lamp generated white light by using a Geissler tube filled with carbon dioxide. However, the carbon dioxide tended to break down. Hence in later lamps, the Geissler tube was filled with nitrogen (which generated red light), and the clear glass was replaced with uranium glass (which fluoresced with a green light).[14]

Intended for use in the potentially explosive environment of mining, as well as oxygen-free environments like diving or for a heatless lamp for possible use in surgery, the lamp was actually developed both by Alphonse Dumas, an engineer at the iron mines of Saint-Priest and of Lac, near Privas, in the department of Ardèche, France, and by Dr Camille Benoît, a medical doctor in Privas.[15] In 1864, the French Academy of Sciences awarded Dumas and Benoît a prize of 1,000 francs for their invention.[16] The lamps, cutting-edge technology in their time, gained fame after being described in several of Jules Verne's science-fiction novels.[17]

Color

[edit]

Each gas, depending on its atomic structure emits radiation of certain wavelengths, its emission spectrum, which determines the color of the light from the lamp. As a way of evaluating the ability of a light source to reproduce the colors of various objects being lit by the source, the International Commission on Illumination (CIE) introduced the color rendering index (CRI). Some gas-discharge lamps have a relatively low CRI, which means colors they illuminate appear substantially different from how they do under sunlight or other high-CRI illumination.

Gas Color Spectrum Notes Image
Helium White to orange; under some conditions may be gray, blue, or green-blue. Used by artists for special-purpose lighting.
Neon Red-orange Intense light. Used frequently in neon signs and neon lamps.
Argon Violet to pale lavender blue Often used together with mercury vapor.
Krypton Gray off-white to green. At high peak currents, bright blue-white. Used by artists for special-purpose lighting.
Xenon Gray or blue-gray dim white. At high peak currents, very bright green-blue. Used in flashlamp, xenon HID headlamps, and xenon arc lamps.
Nitrogen Similar to argon but duller, more pink; at high peak currents bright blue-white. used in the Moore lamp (historically)
Oxygen Violet to lavender, dimmer than argon
Hydrogen Lavender at low currents, pink to magenta over 10 mA
Water vapor Similar to hydrogen, dimmer
Carbon dioxide Blue-white to pink, at lower currents brighter than xenon Used in carbon dioxide laser, the Moore lamp (historically).
Carbon Monoxide Similar to carbon dioxide.
Methane Magenta, but more purple and pink.
Chlorine Lime or chartreuse. used in the Halogen lamp (historically)
Fluorine Mustard or ivory. used in the Halogen lamp (historically)
Ammonia Fuchsia, but more purple.
Ozone Indigo or navy, similar to oxygen
Mercury vapor Light blue, intense ultraviolet Ultraviolet not shown on this spectral image.

Used in combination with phosphors used to generate many colors of light. Widely used in mercury-vapor lamps and fluorescent tubes.

Sodium vapor (low pressure) Bright orange-yellow Widely used in sodium-vapor lamps.

Types

[edit]

Lamps are divided into families based on the pressure of gas, and whether or not the cathode is heated. Hot cathode lamps have electrodes that operate at a high temperature and are heated by the arc current in the lamp. The heat knocks electrons out of the electrodes by thermionic emission, which helps maintain the arc. In many types the electrodes consist of electrical filaments made of fine wire, which are heated by a separate current at startup, to get the arc started. Cold cathode lamps have electrodes that operate at room temperature. To start conduction in the lamp a high enough voltage (the striking voltage) must be applied to ionize the gas, so these lamps require higher voltage to start.

A compact fluorescent lamp

Low pressure discharge lamps

[edit]

Low-pressure lamps have working pressure much less than atmospheric pressure. For example, common fluorescent lamps operate at a pressure of about 0.3% of atmospheric pressure.

Fluorescent lamps, a heated-cathode lamp, the most common lamp in office lighting and many other applications, produces up to 100 lumens per watt

Neon lighting, a widely used form of cold-cathode specialty lighting consisting of long tubes filled with various gases at low pressure excited by high voltages, used as advertising in neon signs.

Low pressure sodium lamps, the most efficient gas-discharge lamp type, producing up to 200 lumens per watt, but at the expense of very poor color rendering. The almost monochromatic yellow light is only acceptable for street lighting and similar applications.

A small discharge lamp containing a bi-metallic switch is used to start a fluorescent lamp. In this case the heat of the discharge is used to actuate the switch; the starter is contained in an opaque enclosure and the small light output is not used.

Continuous glow lamps are produced for special applications where the electrodes may be cut in the shape of alphanumeric characters and figural shapes.[18]

A flicker light bulb, flicker flame light bulb or flicker glow lamp is a gas-discharge lamp which produces light by ionizing a gas, usually neon mixed with helium and a small amount of nitrogen gas, by an electric current passing through two flame shaped electrode screens coated with partially decomposed barium azide. The ionized gas moves randomly between the two electrodes which produces a flickering effect, often marketed as suggestive of a candle flame (see image).[19]

High pressure discharge lamps

[edit]

High-pressure lamps have a discharge that takes place in gas under slightly less to greater than atmospheric pressure. For example, a high pressure sodium lamp has an arc tube under 100 to 200 torr pressure, about 14% to 28% of atmospheric pressure; some automotive HID headlamps have up to 50 bar or fifty times atmospheric pressure.

Metal halide lamps produce almost white light, and attain 100 lumen per watt light output. Applications include indoor lighting of high buildings, parking lots, shops, sport terrains.

High pressure sodium lamps, producing up to 150 lumens per watt produce a broader light spectrum than the low pressure sodium lamps. Also used for street lighting, and for artificial photoassimilation for growing plants

High pressure mercury-vapor lamps are the oldest high pressure lamp type and have been replaced in most applications by metal halide and the high pressure sodium lamps. They require a shorter arc length.

High-intensity discharge lamps

[edit]
15 kW xenon short-arc lamp used in IMAX projectors

A high-intensity discharge (HID) lamp is a type of electrical lamp which produces light by means of an electric arc between tungsten electrodes housed inside a translucent or transparent fused quartz or fused alumina arc tube. Compared to other lamp types, relatively high arc power exists for the arc length. Examples of HID lamps include mercury-vapor lamps, metal halide lamps, ceramic discharge metal halide lamps, sodium vapor lamps and xenon arc lamps

HID lamps are typically used when high levels of light and energy efficiency are desired.

Other examples

[edit]

The Xenon flash lamp produces a single flash of light in the millisecond-microsecond range and is commonly used in film, photography and theatrical lighting. Particularly robust versions of this lamp, known as strobe lights, can produce long sequences of flashes, allowing for the stroboscopic examination of motion. This has found use in the study of mechanical motion, in medicine and in the lighting of dance halls.

Alternatives

[edit]

See also

[edit]

References

[edit]
  1. ^ a b "The Low Pressure Sodium Lamp".
  2. ^ a b "The Low Pressure Sodium Lamp".
  3. ^ "Lighting Comparison: LED vs High Pressure Sodium/Low Pressure Sodium". www.stouchlighting.com.
  4. ^ "The Sodium Lamp - How it works and history". edisontechcenter.org.
  5. ^ "Types of Lighting". Energy.gov. US Department of Energy. Retrieved 10 June 2013.
  6. ^ "Lighting technologies: a guide to energy-efficient illumination" (PDF). Energy Star. US Environmental Protection Agency. Retrieved 10 June 2013.
  7. ^ See:
    • (Staff) (1676). "Experience faire à l'Observatoire sur la Barometre simple touchant un nouveau Phenomene qu'on y a découvert" [Experiment done at the [Paris] observatory on a simple barometer concerning a new phenomenon that was discovered there]. Journal des Sçavans (Paris edition) (in French): 112–113. From pp. 112–113: "On sçait que le Barometre simple n'est autre chose qu'un tuyau de verre … toutes les circonstances qu'on y découvrira." (One knows that the simple barometer is nothing more than a glass tube [that is] hermetically sealed at the top and open at the bottom, in which there is mercury which usually stands at a certain height, the remainder [of the tube] above being void. Mr Picard has one of them at the observatory [in Paris] which in the dark — when one shakes it enough to make the mercury jiggle — makes sparks and throws a certain flickering light which fills all of the part of the tube that's void: but it happens during each swing only in the void and only during the descent of the mercury. One has tried to perform the same experiment on various other barometers of the same composition; but so far one has succeeded with only [this] one. As one has resolved to examine the thing in every way, we will give at greater length all the circumstances of this as one discovers them.)
    • Reprinted in: (Staff) (1676). "Experience faire à l'Observatoire sur la Barometre simple touchant un nouveau Phénomène qu'on y a découvert" [Experiment done at the [Paris] observatory on a simple barometer concerning a new phenomenon that was discovered there]. Journal des Sçavans (Amsterdam edition) (in French): 132.
    • (Staff) (1694). "Sur la lumière du baromètre" [On the light of the barometer]. Histoire de l'Académie Royale des Sciences (in French). 2: 202–203. From p. 202: "Vers l'année 1676, M. Picard faisant transporter son Baromètre, … il ne s'en trouva aucun qui fit de la lumière." (Towards the year 1676, [while] Mr Picard [was] transporting his barometer from the observatory [in Paris] to the port of Saint Michel during the night, he perceived a light in the part of the tube where the mercury was moving; this phenomenon surprising him, he immediately announced it to the [Journal des] Sçavans, and those who had barometers having examined them, they found nothing which made light.) By the time of Picard's death (1682), his barometer had lost its ability to produce light. However, after Philippe de La Hire (1640–1718) restored Picard's barometer, it once again produced light. Cassini (1625–1712) also owned a barometer that produced light.
    • See also: Barometric light
  8. ^ Hauksbee, Francis (1 January 1705). "Several experiments on the mercurial phosphorus, made before the Royal Society, at Gresham-College". Philosophical Transactions of the Royal Society of London. 24 (303): 2129–2135. doi:10.1098/rstl.1704.0096. S2CID 186212654.
  9. ^ Petrov, Vasily (1803). Извѣстіе о Гальвани-Вольтовскихъ Опытахъ [News of Galvanic-Voltaic Experiments] (in Russian). Saint Petersburg, Russia: Printing House of the State Medical College. From pp. 163–164: "Естьли на стеклянную плитку или на скамеечку со стеклянными ножками будуть положены два или три куска древесного угля, … и отъ которого темный покой довольно ясно освѣщенъ быть можетъ." (If on a glass plate or on a bench with glass legs there be placed two or three pieces of charcoal, capable of producing light-bearing phenomena by means of the Galvanic-Voltaic fluid, and if there are then insulated metal conductors (electrodes), in communication with both poles of a huge battery, bring these closer to each other to a distance [i.e., separation] of one to three lines [2.5-7.5 mm]; then there is between them a very bright white light or flame, from which these coals burn quickly or slowly, and by which the darkness may be quite clearly illuminated.)
  10. ^ Anders, Andre (2003). "Tracking down the origin of arc plasma science. II. Early continuous discharges". IEEE Transactions on Plasma Science. 31 (5): 1060–1069. Bibcode:2003ITPS...31.1060A. doi:10.1109/TPS.2003.815477. S2CID 11047670.
  11. ^ Petrov also observed electric discharges through low-pressure air. From (Petrov, 1803), p. 176: "Впрочемъ, свѣтъ, сопровождавшій теченіе Гальвани-Вольтовской жидкости въ безвоздушномъ мѣстѣ, былъ яркій, белаго цвѣта, и при томъ не рѣдко оть разкаленнаго конца иголки, либо и ото дна стакана отскакивали искры или какъ бы маленькія звѣздочки." (However, the light accompanying the flow of the Galvanic-Voltaic fluid in the airless space was bright, white in color; and at the same time, not rarely from the incandescent ends of the needles [i.e., electrodes] or from the bottom of the glass, came sparks like small stars.) From (Petrov, 1803), p. 190: "3) Електрическій свѣтъ въ весьма изтонченномъ воздухѣ предстовляетъ несравненно величественнѣйшія явленія, нежели какія могъ я примѣтить отъ свѣта Гальвани-Вольтовской жидкости." (Electric light in very rarefied air presents an incomparably more majestic phenomenon than any that I could perceive from the light of the Galvanic-Voltaic fluid.)
  12. ^ In 1801 and 1802, Davy observed bright electrical sparks, but not a continuous arc. His battery lacked sufficient voltage and current to sustain an electric arc. Not until 1808 did Davy possess a battery with sufficient voltage and current to sustain an electric arc. In 1808 and 1809, he recorded observations of electric arcs:
  13. ^ For the early history of electric arcs, see: Ayrton, Hertha (1902). The Electric Arc. New York City, New York, USA: D. Van Nostrand Co. pp. 19 ff.
  14. ^ Paolo Brenni (2007) "Uranium glass and its scientific uses," Archived 2014-06-30 at the Wayback Machine Bulletin of the Scientific Instrument Society, no. 92, pages 34–39; see page 37.
  15. ^ See:
  16. ^ "Prix dit des arts insalubres", Comptes rendus, 60 : 273 (1865).
  17. ^ Journey to the Center of the Earth (1864), From the Earth to the Moon (1865), and 20,000 Leagues Under the Sea (1869).
  18. ^ "kilokat's ANTIQUE LIGHT BULB site : neon lamps". bulbcollector.com.
  19. ^ US patent 3238408, Kayatt Philip J., "Flicker glow lamps", issued 1966-03-1 
  20. ^ "FAQ: phasing out conventional incandescent bulbs". europa.eu. Retrieved July 22, 2022.
  21. ^ "LED Light Bulb". yourelectricianbrisbane.com.au. 15 March 2022. Retrieved July 22, 2022.

Further reading

[edit]
[edit]