×

An analytical solution for free liquid sloshing in a finite-length horizontal cylindrical container filled to an arbitrary depth. (English) Zbl 1480.76010

Summary: A general series-type theoretical formulation based on the linearized potential theory, the method of separation of variables, and the translational addition theorem for cylindrical Bessel functions is developed to study three-dimensional natural sloshing in a partially filled horizontally-mounted circular cylindrical tank of finite span. Assuming time-harmonic variations, the potential solutions associated with the Symmetric/Antisymmetric (S/A) modes of free liquid surface oscillations are first analytically expanded as series of bounded spatial functions with unknown modal coefficients. The impenetrability conditions of the rigid end-plates along with the free surface dynamic/kinematic boundary condition are then imposed. The zero-normal-velocity requirement of the lateral tank boundary is subsequently applied by innovative use of Graf’s translational addition theorem for modified cylindrical Bessel functions. After truncation, four independent sets of homogeneous algebraic equations are obtained that are then numerically worked out for the natural sloshing eigen-frequencies and free surface oscillation mode shapes. Extensive numerical data include the first thirty six longitudinal/transverse Antisymmetric/Symmetric (AA, SA, AS, SS) dimensionless sloshing frequencies, for a wide range of liquid fill depths and container span to radius ratios. Also, the influence of fill depth on the free surface oscillation mode shapes is addressed through selected 2D images. Comprehensive numerical simulations illustrate the strong effects of container length and liquid fill depth on the calculated sloshing frequencies. It is revealed that the frequency branches with the same transverse mode number form a cluster that progressively merge together amid the tank fill-depth limits as the tank span ratio increases. On the other hand, when the tank length substantially decreases, the number of“frequency cross-over” between various frequency clusters at certain liquid fill depths considerably increases. Moreover, primary advantages of proposed methodology in comparison to other approximate/numerical methods are explicitly pointed out, convergence of solution is tested, and accuracy/reliability of the results is demonstrated by comparisons with available data.

MSC:

76B10 Jets and cavities, cavitation, free-streamline theory, water-entry problems, airfoil and hydrofoil theory, sloshing
86A15 Seismology (including tsunami modeling), earthquakes

Software:

Maple
Full Text: DOI

References:

[1] Dias, F.; Ghidaglia, J.-M.; Le Coq, G., On the fluid dynamics models for sloshing, (Proceedings of the Seventeenth International Offshore and Polar Engineering Conference, International Society of Offshore and Polar Engineers (2007))
[2] Eswaran, M.; Saha, U. K., Sloshing of liquids in partially filled tanks-a review of experimental investigations, Ocean Syst. Eng., 1, 131-155 (2011)
[3] Mahajan, S. M.; Patil, A. D.; Bartaria, V., Review on design optimization of liquid carrier tanker for reduction of sloshing effects, IOSR J. Mech. Civil Eng., 6, 15-24 (2013)
[4] Chaudhari, C. D.; Deshmukh, P. D., Review on various roadways tanker cargo for controlling sloshing behaviour, IJMCA, 2, 080-085 (2014)
[5] Zheng, X. L.; Li, X. S.; Ren, Y. Y.; Cheng, Z. Q., Transient Liquid Sloshing in Partially-Filled Tank Vehicles, Applied Mechanics and Materials, 133-138 (2014), Trans Tech Publ
[6] Shu-en, Z.; Ling-he, Z., Dynamic simulation of liquid sloshing characteristics for tank trucks in lateral movement, Appl. Math. Mech. (1000-0887), 35, 1259-1270 (2014)
[7] Malhotra, P. K.; Nimse, P.; Meekins, M., Seismic sloshing in a horizontal liquid storage tank, Struct. Eng. Int., 24, 466-473 (2014)
[8] Koller, M. G.; Baltas, C.; Lestuzzi, P., Seismic assessment of horizontal cylindrical reservoirs, Seismic Design of Industrial Facilities, 461-472 (2014), Springer
[9] Klatil, J.; Drabek, P., Vibrations of liquid in partially filled rigid horizontal cylindrical tank caused by horizontal and vertical seismic acceleration, seminar on safety and operating reliability of the WWER, Marianske Lazne, 180-185 (1989)
[10] Diamanti, K.; Doukas, I.; Karamanos, S. A., Seismic Analysis and Design of Industrial Pressure Vessels, COMPDYN (2011)
[11] Ananthakumar, N.; Rajesh, K., Slosh analysis of launch vehicle using arbitrary Lagrangian Eulerian method-review, (Proceedings for the International Conference on Advanced Trends in Engineering and Technology (2014))
[12] Hasheminejad, S. M.; Mohammadi, M. M.; Jarrahi, M., Liquid sloshing in partly-filled laterally-excited circular tanks equipped with baffles, J. Fluids Struct., 44, 97-114 (2014)
[13] Kolaei, A., Dynamic Liquid Slosh in Moving Containers (2014), Concordia University
[14] Platyrrachos, M.; Karamanos, S., Finite element analysis of sloshing in horizontal-cylindrical industrial vessels under earthquake loading, (Proceedings for the ASME 2005 Pressure Vessels and Piping Conference, American Society of Mechanical Engineers (2005)), 63-73
[15] Modaressi-Tehrani, K.; Rakheja, S.; Sedaghati, R., Analysis of the overturning moment caused by transient liquid slosh inside a partly filled moving tank, (Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 220 (2006)), 289-301
[16] Modaressi-Tehrani, K.; Rakheja, S.; Stiharu, I., Three-dimensional analysis of transient slosh within a partly-filled tank equipped with baffles, Veh. Syst. Dyn., 45, 525-548 (2007)
[17] Karamanos, S. A.; Papaprokopiou, D.; Platyrrachos, M. A., Finite element analysis of externally-induced sloshing in horizontal-cylindrical and axisymmetric liquid vessels, J. Pressure Vessel Technol., 131, Article 051301 pp. (2009)
[18] Dasgupta, A., Effect of Tank Cross-Section and Longitudinal Baffles on Transient Liquid Slosh in Partly-Filled Road Tankers (2011), Concordia University Montreal: Concordia University Montreal Quebec, Canada
[19] Kolaei, A.; Rakheja, S.; Richard, M. J., Three-dimensional dynamic liquid slosh in partially-filled horizontal tanks subject to simultaneous longitudinal and lateral excitations, Eur. J. Mech. B Fluids, 53, 251-263 (2015) · Zbl 1408.76055
[20] Fox, D. W.; Kuttler, J. R., Sloshing frequencies, Z. angew. Math. Phys. ZAMP, 34, 668-696 (1983) · Zbl 0539.76022
[21] Evans, D.; Linton, C., Sloshing frequencies, Q. J. Mech. Appl. Math., 46, 71-87 (1993) · Zbl 0774.76015
[22] Papaspyrou, S.; Karamanos, S.; Valougeorgis, D., Response of half-full horizontal cylinders under transverse excitation, J. Fluids Struct., 19, 985-1003 (2004) · Zbl 1111.74588
[23] Hasheminejad, S. M.; Aghabeigi, M., Liquid sloshing in half-full horizontal elliptical tanks, J. Sound Vib., 324, 332-349 (2009)
[24] Hasheminejad, S. M.; Aghabeigi, M., Transient sloshing in half-full horizontal elliptical tanks under lateral excitation, J. Sound Vib., 330, 3507-3525 (2011)
[25] Hasheminejad, S. M.; Aghabeigi, M., Sloshing characteristics in half-full horizontal elliptical tanks with vertical baffles, Appl. Math. Modell., 36, 57-71 (2012)
[26] Budiansky, B., Sloshing of liquids in circular canals and spherical tanks, J. Aerosp. Sci. Technol., 27, 161-173 (1960)
[27] McIver, P., Sloshing frequencies for cylindrical and spherical containers filled to an arbitrary depth, J. Fluid Mech., 201, 243-257 (1989) · Zbl 0667.76024
[28] Patkas, L. A.; Karamanos, S. A., Variational solutions for externally induced sloshing in horizontal-cylindrical and spherical vessels, J. Eng. Mech., 133, 641-655 (2007)
[29] Faltinsen, O. M.; Timokha, A. N., A multimodal method for liquid sloshing in a two-dimensional circular tank, J. Fluid Mech., 665, 457-479 (2010) · Zbl 1225.76048
[30] Kolaei, A.; Rakheja, S.; Richard, M. J., Range of applicability of the linear fluid slosh theory for predicting transient lateral slosh and roll stability of tank vehicles, J. Sound Vib., 333, 263-282 (2014)
[31] Kolaei, A.; Rakheja, S.; Richard, M. J., Effects of tank cross-section on dynamic fluid slosh loads and roll stability of a partly-filled tank truck, Eur. J. Mech. B. Fluids, 46, 46-58 (2014) · Zbl 1297.76023
[32] Kobayashi, N.; Mieda, T.; Shibata, H.; Shinozaki, Y., A study of the liquid slosh response in horizontal cylindrical tanks, J. Press. Vessel Technol. USA, 111, 32-38 (1989)
[33] McIver, P.; McIver, M., Sloshing frequencies of longitudinal modes for a liquid contained in a trough, J. Fluid Mech., 252, 525-541 (1993) · Zbl 0777.76010
[34] Papaspyrou, S.; Valougeorgis, D.; Karamanos, S., Sloshing effects in half-full horizontal cylindrical vessels under longitudinal excitation, J. Appl. Mech., 71, 255-265 (2004) · Zbl 1111.74588
[35] Xu, L., Fluid Dynamics in Horizontal Cylindrical Containers and Liquid Cargo Vehicle Dynamics (2005), University of Regina: University of Regina Saskatchewan, Canada
[36] Karamanos, S. A.; Patkas, L. A.; Platyrrachos, M. A., Sloshing effects on the seismic design of horizontal-cylindrical and spherical industrial vessels, J. Press. Vessel Technol., 128, 328-340 (2006)
[37] Magnus, W.; Oberhettinger, F.; Soni, R., Formulas and Theorems for the Special Functions of Mathematical Physics (2013), Springer Science & Business Media · Zbl 0143.08502
[38] Ashtiani, I. H.; Abedi, M., Effects of Liquid Cargo on Lateral Stability of B-Train Combination (2014), SAE, Technical Paper
[40] Abramowitz, M.; Stegun, I. A., Handbook of Mathematical Functions: With Formulas, Graphs, and Mathematical Tables (1964), Courier Corporation · Zbl 0171.38503
[41] Bernardin, L.; Chin, P.; DeMarco, P.; Geddes, K.; Hare, D.; Heal, K.; Labahn, G.; May, J.; McCarron, J.; Monagan, M., Maple programming guide (2011), Maplesoft, a division of waterloo maple Inc, ISBN 978-1-926902-08-1. www. maplesoft. com
[42] Lundberg, P. A.; Nilsson, J. A., Analytical studies of sloshing in half-cylindrical tanks, (Proceedings of the Institution of Civil Engineers-Engineering and Computational Mechanics, 166 (2013)), 204-210
[43] McCarty, J. L.; Stephens, D. G., Investigation of the Natural Frequencies of Fluids in Spherical and Cylindrical Tanks (1960), National Aeronautics and Space Administration
[44] Bauer, H., Dynamic behaviour of an elastic separating wall in vehicle containers: Part 1, Int. J. Veh. Des., 2, 44-77 (1981)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.