×

Numerical simulation of annular flow hydrodynamics in microchannels. (English) Zbl 1390.76869

Summary: Annular flow is the dominant flow regime in microchannel flow boiling because it appears at very low vapor quality and persists until dryout at high quality. This flow regime is hydrodynamically unstable, as the phase interfaces are subject to instabilities triggered by flow perturbations. In this work, a computational fluid dynamics (CFD) model is proposed and verified for the studies of annular flow hydrodynamics in microchannels, using the commercial software ANSYS Fluent. Verification of the model is performed by comparing simulation results with existing analytical theories. The potential for the application of this model to microchannel annular flow boiling has been demonstrated.

MSC:

76T10 Liquid-gas two-phase flows, bubbly flows
76E17 Interfacial stability and instability in hydrodynamic stability
76F65 Direct numerical and large eddy simulation of turbulence

Software:

ANSYS; FLUENT
Full Text: DOI

References:

[1] Kandlikar, SG, History, advances, and challenges in liquid flow and flow boiling heat transfer in microchannels: a critical review, J Heat Transf, 134, (2012)
[2] Guo, Z; Fletcher, DF; Haynes, BS, A review of computational modelling of flow boiling in microchannels, J Comput Multiphase Flows, 6, 79-110, (2014)
[3] Chen, S; Yang, Z; Duan, Y; Chen, Y; Wu, D, Simulation of condensation flow in a rectangular microchannel, Chem Eng Process, 76, 60-69, (2014)
[4] Da Riva, E; Del Col, D, Numerical simulation of laminar liquid film condensation in a horizontal circular minichannel, J Heat Transf, 134, (2012)
[5] Jesseela, S; Sobhan, CB, Numerical modeling of annular flow with phase change in a microchannel, Int J Therm Sci, 89, 87-99, (2015)
[6] Triplett, KA; Ghiaasiaan, SM; Abdel-Khalik, SI; Sadowski, DL, Gas-liquid two-phase flow in microchannels part I: two-phase flow patterns, Int J Multiphase Flow, 25, 377-394, (1999) · Zbl 1137.76763
[7] Chung, PMY; Kawaji, M, The effect of channel diameter on adiabatic two-phase flow characteristics in microchannels, Int J Multiphase Flow, 30, 735-761, (2004) · Zbl 1136.76486
[8] Coleman, JW; Garimella, S, Characterization of two-phase flow patterns in small diameter round and rectangular tubes, Int J Heat Mass Transf, 42, 2869-2881, (1999)
[9] Ide, H; Kariyasaki, A; Fukano, T, Fundamental data on the gas-liquid two-phase flow in minichannels, Int J Therm Sci, 46, 519-530, (2007)
[10] Mishima, K; Hibiki, T, Some characteristics of air-water two-phase flow in small diameter vertical tubes, Int J Multiphase Flow, 22, 703-712, (1996) · Zbl 1135.76498
[11] Yang, C-Y; Shieh, C-C, Flow pattern of air-water and two-phase R-134a in small circular tubes, Int J Multiphase Flow, 27, 1163-1177, (2001) · Zbl 1137.76791
[12] Lamb, H, Hydrodynamics, (1953), Cambridge university press · JFM 26.0868.02
[13] Benjamin, TB, Shearing flow over a wavy boundary, J Fluid Mech, 6, 161-205, (1959) · Zbl 0093.19106
[14] Miles, JW, On the generation of surface waves by shear flows part 3. Kelvin-Helmholtz instability, J Fluid Mech, 6, 583-598, (1959) · Zbl 0090.42102
[15] Azzopardi, BJ, Drops in annular two-phase flow, Int J Multiphase Flow, 23, 1-53, (1997) · Zbl 1135.76352
[16] Ishii, M; Mishima, K, Droplet entrainment correlation in annular two-phase flow, Int J Heat Mass Transf, 32, 1835-1846, (1989)
[17] McCoy, DD; Hanratty, TJ, Rate of deposition of droplets in annular two-phase flow, Int J Multiphase Flow, 3, 319-331, (1977)
[18] Fouilland, TS; Fletcher, DF; Haynes, BS, Film and slug behaviour in intermittent slug-annular microchannel flows, Chem Eng Sci, 65, 5344-5355, (2010)
[19] Wehinger, GD; Peeters, J; Muzaferija, S; Eppinger, T; Kraume, M, Numerical simulation of vertical liquid-film wave dynamics, Chem Eng Sci, 104, 934-944, (2013)
[20] Hirt, CW; Nichols, BD, Volume of fluid (VOF) method for the dynamics of free boundaries, J Comput Phys, 39, 201-225, (1981) · Zbl 0462.76020
[21] Muzaferija, S; Peric, M, Computation of free-surface flows using interface tracking and interface-capturing methods, Adv Fluid Mech, 24, 59-100, (1999)
[22] Guo, Z; Haynes, BS; Fletcher, DF, Numerical simulation of annular flow boiling in microchannels, J Comput Multiphase Flows, (2016), accepted
[23] Ong, CL; Thome, JR, Macro-to-microchannel transition in two-phase flow: part 1 - two-phase flow patterns and film thickness measurements, Exp Therm Fluid Sci, 35, 37-47, (2011)
[24] Brackbill, JU; Kothe, DB; Zemach, C, A continuum method for modeling surface tension, J Comput Phys, 100, 335-354, (1992) · Zbl 0775.76110
[25] Gupta, R, CFD simulations of gas-liquid flow in microchannels, (2010), The University of Sydney, [Ph.D. Thesis]
[26] Park, J-C; Kim, M-H; Miyata, H, Fully non-linear free-surface simulations by a 3D viscous numerical wave tank, Int J Numer Methods Fluids, 29, 685-703, (1999) · Zbl 0947.76063
[27] Youngs, DL, Time-dependent multi-material flow with large fluid distortion, Numer Meth Fluid Dyn, 24, 273-285, (1982) · Zbl 0537.76071
[28] ANSYS fluent 15.0 theory guide, (2013), ANSYS Inc Canonsburg, PA
[29] Guo, Z; Fletcher, DF; Haynes, BS, Implementation of a height function method to alleviate spurious currents in CFD modelling of annular flow in microchannels, Appl Math Modell, 39, 4665-4686, (2015) · Zbl 1443.76036
[30] Meier, M; Yadigaroglu, G; Smith, BL, A novel technique for including surface tension in PLIC-VOF methods, Eur J Mech B Fluids, 21, 61-73, (2002) · Zbl 1064.76084
[31] ANSYS fluent 15.0 UDF manual, (2013), ANSYS Inc Canonsburg, PA
[32] Patankar, SV, Numerical heat transfer and fluid flow, (1980), USA: Hemisphere Publishing Corporation · Zbl 0521.76003
[33] Kawaji, M; Chung, PMY, Adiabatic gas-liquid flow in microchannels, Microscale Thermophys Eng, 8, 239-257, (2004)
[34] Gupta, R; Fletcher, DF; Haynes, BS, On the CFD modelling of Taylor flow in microchannels, Chem Eng Sci, 64, 2941-2950, (2009)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.