×

Reliability evaluation of a system with active redundancy strategy and load-sharing time-dependent failure rate components using Markov process. (English) Zbl 07710551

Summary: Due to the high sensitivity in applying electronic and mechanical equipment in functional systems, creating conditions to increase a system’s reliability is always critical for system designers. In most of the studies in the reliability area, it is assumed that the failure rates of the system’s components are constant but considering time-dependent failure rates for the components is more realistic and draws the models near to real conditions. This paper presents a framework to use Markov process to obtain the system’s reliability under some assumptions. In this regard, we worked on a load-sharing system with identical time-dependent failure rate components and used Markov process to calculate the system reliability. First, we define the requirements for using Markov process, and it is shown that it is possible to use it to calculate the considered system’s reliability. Then, a formula is presented to calculate the reliability of the considered system using the Markov process through solving the Chapman Kolmogorov equation, when the components’ life has Weibull Distribution. Next, we validate the results of the presented formula using the simulation technique. Finally, we compare the computational time of the proposed model for solving large-size problems with the simulation technique. The results show the superiority of the proposed model in terms of computational time.

MSC:

90-XX Operations research, mathematical programming
74-XX Mechanics of deformable solids
Full Text: DOI

References:

[1] Carrasco, J. M.; Ortega, E. M.; Cordeiro, G. M., A generalized modified Weibull distribution for lifetime modeling, Computational Statistics & Data Analysis, 53, 2, 450-62 (2008) · Zbl 1231.62015 · doi:10.1016/j.csda.2008.08.023
[2] Che, H.; Zeng, S.; Guo, J., A reliability model for load-sharing k-out-of-n systems subject to soft and hard failures with dependent workload and shock effects, Eksploatacja i Niezawodność (2020) · doi:10.17531/ein.2020.2.8
[3] Chen, Z., Component reliability analysis of k-out-of-n systems with censored data, Journal of Statistical Planning and Inference, 116, 1, 305-15 (2003) · Zbl 1020.62093 · doi:10.1016/S0378-3758(02)00179-9
[4] Eryilmaz, S., Reliability of a k-out-of-n system equipped with a single warm standby component, IEEE Transactions on Reliability, 62, 2, 499-503 (2013) · doi:10.1109/TR.2013.2259202
[5] Guilani, P. P.; Sharifi, M.; Niaki, S. T. A.; Zaretalab, A., Reliability evaluation of non-reparable three-state systems using Markov model and its comparison with the UGF and the recursive methods, Reliability Engineering & System Safety, 129, 29-35 (2014) · doi:10.1016/j.ress.2014.04.019
[6] Guilani, P. P.; Zaretalab, A.; A Niaki, S. T.; Pourkarim Guilani, P., A bi-objective model to optimize reliability and cost of k-out-of-n series-parallel systems with tri-state components, Scientia Iranica, 24, 3, 1585-602 (2017) · doi:10.24200/sci.2017.4137
[7] Guilani, P. P.; Azimi, P.; Sharifi, M.; Amiri, M., Redundancy allocation problem with a mixed strategy for a system with k-out-of-n subsystems and time-dependent failure rates based on Weibull distribution: An optimization via simulation approach, Scientia Iranica, 26, 2, 1023-38 (2019)
[8] Guilani, P. P.; Ardakan, M. A.; Guilani, P. P.; Lehdarboni, S. A., An exact Markov chain model for reliability-redundancy allocation problem with a choice of redundancy strategy, Life Cycle Reliability and Safety Engineering (2021) · doi:10.1007/s41872-021-00170-3
[9] Guo, J.; Shen, Y.; Lu, Z.; Che, H.; Liu, Z.; Zeng, S., Reliability modeling for consecutive k‐out‐of‐n: F systems with local load‐sharing components subject to dependent degradation and shock processes, Quality and Reliability Engineering International, 36, 5, 1553-69 (2020) · doi:10.1002/qre.2645
[10] Hajipour, Y.; Taghipour, S., Non-periodic inspection optimization of multi-component and k-out-of-m systems, Reliability Engineering & System Safety, 156, 228-43 (2016) · doi:10.1016/j.ress.2016.08.008
[11] Hisada, K.; Arizino, F., Reliability tests for Weibull distribution with varying shape-parameter, based on complete data, IEEE Transactions on Reliability, 51, 3, 331-36 (2002) · doi:10.1109/TR.2002.801845
[12] Huang, L.; Xu, Q., Lifetime reliability for load-sharing redundant systems with arbitrary failure distributions, IEEE Transactions on Reliability, 59, 2, 319-30 (2010)
[13] Méndez‐González, L. C.; Rodríguez‐Picón, L. A.; Valles‐Rosales, D. J.; Romero‐López, R.; Quezada‐Carreón, A. E., Reliability analysis for electronic devices using beta‐Weibull distribution, Quality and Reliability Engineering International, 33, 8, 2521-30 (2017)
[14] Nourelfath, M.; Châtelet, E.; Nahas, N., Joint redundancy and imperfect preventive maintenance optimization for series-parallel multi-state degraded systems, Reliability Engineering & System Safety, 103, 51-60 (2012) · doi:10.1016/j.ress.2012.03.004
[15] Okasha, H. M.; El-Baz, A. H.; Tarabia, A. M. K.; Basheer, A. M., Extended inverse Weibull distribution with reliability application, Journal of the Egyptian Mathematical Society, 25, 3, 343-49 (2017) · Zbl 1377.62060 · doi:10.1016/j.joems.2017.02.006
[16] Park, C., Parameter estimation for the reliability of load-sharing systems, IIE Transactions, 42, 10, 753-65 (2010) · doi:10.1080/07408171003670991
[17] Peng, X.; Yan, Z., Estimation and application for a new extended Weibull distribution, Reliability Engineering & System Safety, 121, 34-42 (2014) · doi:10.1016/j.ress.2013.07.007
[18] Sharifi, M.; Ganjian, M.; Ghajar, H. R., Expansion of reliability models based on markov chain with consideration of fuzzy failure rates: system with two parallel and identical elements with constant failure rates, International Conference on Computational Intelligence for Modelling, Control and Automation and International Conference on Intelligent Agents, Web Technologies and Internet Commerce (CIMCA-IAWTIC’06), 2, 1022-26 (2005) · doi:10.1109/CIMCA.2005.1631603
[19] Sharifi, M., Memariani, A., and Noorossana, R.. 2009. Real time study of a k-out-of-n system: N identical elements with increasing failure rates.
[20] Sharifi, M.; Mishamandani, S. B.; Haratizadeh, S., Real time redundancy study of a time dependent failure rates model, 448-54 (2010)
[21] Sharifi, M.; Taghipour, S., Optimal inspection interval for a k-out-of-n system with non-identical components, Journal of Manufacturing Systems, 55, 233-47 (2020) · doi:10.1016/j.jmsy.2020.03.007
[22] Sharifi, M.; Taghipour, S.; Abhari, A., Inspection Interval Optimization for a k-out-of-n Load Sharing System under a Hybrid Mixed Redundancy Strategy (2021), Reliability Engineering & System Safety · doi:10.1016/j.ress.2021.107681
[23] Soro, I. W.; Nourelfath, M.; Aït-Kadi, D., Performance evaluation of multi-state degraded systems with minimal repairs and imperfect preventive maintenance, Reliability Engineering & System Safety, 95, 2, 65-69 (2010) · doi:10.1016/j.ress.2009.08.004
[24] Shortle, J. F.; Thompson, J. M.; Gross, D.; Harris, C. M., Fundamentals of queueing theory, 399 (2018), Hoboken, NJ: John Wiley & Sons · Zbl 1387.60001
[25] Wang, L.; Zhang, J.; Chen, W.; Jia, X., Reliability evaluation of a load-sharing parallel system with failure dependence, Communications in Statistics - Simulation and Computation, 45, 9, 3094-113 (2016) · Zbl 1350.60093 · doi:10.1080/03610918.2014.920880
[26] Wang, D.; Jiang, C.; Park, C., Reliability analysis of load-sharing systems with memory (2019) · Zbl 1429.62454 · doi:10.1007/s10985-018-9425-8
[27] Weibull, W., A statistical distribution function of wide applicability, Journal of Applied Mechanics, 18, 3, 293-97 (1951) · Zbl 0042.37903 · doi:10.1115/1.4010337
[28] Zhang, J.; Zhao, Y.; Ma, X., A new reliability analysis method for load-sharing k-out-of-n: F system based on load-strength model, Reliability Engineering & System Safety, 182, 152-65 (2019) · doi:10.1016/j.ress.2018.10.013
[29] Zhang, J.; Zhao, Y.; Ma, X., Reliability modeling methods for load-sharing k-out-of-n system subject to discrete external load, Reliability Engineering & System Safety, 193, 106603, 106603 (2020) · doi:10.1016/j.ress.2019.106603
[30] Zhao, X.; Liu, B.; Liu, Y., Reliability modeling and analysis of load-sharing systems with continuously degrading components, IEEE Transactions on Reliability, 67, 3, 1096-110 (2018) · doi:10.1109/TR.2018.2846649
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.