How an added mass matrix estimation may dramatically improve FSI calculations for moving foils. (English) Zbl 1480.74065
Summary: This paper presents a corrected partitioned scheme for investigating fluid-structure interaction (FSI) that may be encountered by lifting devices immersed in heavy fluid such as liquids. The purpose of this model is to counteract the penalizing impact of the added mass effect on the classical partitioned FSI coupling scheme. This work is based on an added mass corrected version of the classical strongly coupled partitioned scheme presented in [M. D. Song et al., Comput. Fluids 84, 190–202 (2013; Zbl 1290.76074)]. Results show that this corrected version systematically allows convergence to the coupled solution. The fluid flow model considered here uses a non-stationary potential approach, commonly termed the Panel Method. The advantage of this kind of approach is twofold: first, in restricting itself to a boundary method and, second, in allowing an added mass matrix to be estimated as a post-processing phase. Whereas the classical scheme encounters an acceptable (no numerical oscillation) convergence limit for fluid densities higher than 8 kg/m\(^3\) for the considered case, our corrected scheme is not dependent on fluid density and converges with only 6 iterations. This makes it possible to investigate the dynamic behavior of a 2D foil immersed in heavy fluids such as water. For example, it recognizes that frequency shifting may occur as the consequence of a strong added mass effect.
MSC:
| 74F10 | Fluid-solid interactions (including aero- and hydro-elasticity, porosity, etc.) |
Citations:
Zbl 1290.76074Software:
XFOILReferences:
| [1] | Hartwanger, D.; Horvat, A., 3D modelling of a wind turbine using CFD, Proceedings of NAFEMS UK Conference, Engineering Simulation: Effective Use and Best Practice, Cheltenham, UK (2008) |
| [3] | Lynch, C., Advanced CFD methods for wind turbine analysis (2011), Georgia Institute of Technology, (Ph.D. thesis) |
| [4] | Digraskar, D., Simulations of flow over wind turbines (2010), University of Massachusetts, (Ph.D. thesis) |
| [5] | Lobitz, D.; Veers, P., Aeroelastic behavior of twist-coupled HAWT blades, Proceedings of 36th Aerospace Sciences Meeting and Exhibit, and 1998 ASME Wind Energy Symposium, Reno, NV, AIAA-98-0029 (1998) |
| [6] | De Goeij, W.; van Tooren, M.; Beukers, A., Implementation of bending-torsion coupling in the design of a wind turbine rotor blade, Appl. Energy, 63, 191-207 (1999) |
| [7] | Maheri, A.; Noroozi, S.; Vinney, J., Application of combined analytical/FEA coupled aerostructure simulation in design of wind turbine adaptive blades, Renew. Energy, 32, 2011-2018 (2007) |
| [8] | Larwood, S.; Zuteck, M., Swept wind turbine blade aeroelastic modeling for loads and dynamic behavior, Proceedings of WINDPOWER 2006, Pittsburgh, PA (2006) |
| [9] | Stäblein, A. R.; Hansen, H. M.; Pirrung, G., Fundamental aeroelastic properties of a bendtwist coupled blade section, J. Fluids Struct., 68, 72-89 (2017) |
| [10] | Yu, D.; Kwon, O., Predicting wind turbine blade loads and aeroelastic response using a coupled CFD-CSD method, Renew. Energy, 70, 184-196 (2014) |
| [11] | Carrion, M.; Steijl, R.; Woodgate, M.; Barakos, G.; Munduate, X.; Gomez-Iradi, S., Aeroelastic analysis of wind turbines using a tightly coupled CFD-CSD method, J. Fluids Struct., 50, 392-415 (2014) |
| [12] | Mantia, M. L.; Dabnichki, P., Unsteady panel method for flapping foil, Eng. Anal. Bound. Elem., 33, 4, 572-580 (2009) · Zbl 1244.76050 |
| [13] | Mantia, M. L.; Dabnichki, P., Influence of the wake model on the thrust of oscillating foil, Eng. Anal. Bound. Elem., 35, 3, 404-414 (2011) · Zbl 1259.76003 |
| [14] | Piperno, S.; Farhat, C.; Larrouturou, B., Partitioned procedures for the transient solution of coupled aeroelastic problems. Part I: model problem, theory and two-dimensional application, Comput. Methods Appl. Mech. Eng., 124, 79-112 (1995) · Zbl 1067.74521 |
| [15] | Felippa, C.; Park, K.; Farhat, C., Partitioned analysis of coupled mechanical systems, Comput. Methods Appl. Mech. Eng., 190, 24-25, 3247-3270 (2001) · Zbl 0985.76075 |
| [16] | Idelsohn, S.; Pin, F. D.; Rossi, R.; Oñate, E., Fluid-structure interaction problems with strong added-mass effect, Int. J. Numer. Methods Eng., 80, 10, 1261-1294 (2009) · Zbl 1183.74059 |
| [17] | Stokes, G., On the effect of internal friction of fluids on the motion of pendulums, Trans. Camb. Philos. Soc., 9, 8 (1851) |
| [18] | Morand, H.-P.; Ohayon, R., Fluid-Structure Interaction: Applied Numerical Methods (1995), Wiley · Zbl 0834.73002 |
| [19] | Causin, P.; Gerbeau, J. F.; Nobile, F., Added-mass effect in the design of partitioned algorithms for fluid-structure problems, Comput. Methods Appl. Mech. Eng., 194, 42-44, 4506-4527 (2005) · Zbl 1101.74027 |
| [20] | Brennen, C. E., A Review of Added Mass and Fluid Inertial Forces, Technical Report: Report Number CR 82.010 (1982), Naval Civil Engineering Laboratory: Naval Civil Engineering Laboratory Port Hueneme, California, USA |
| [21] | van Brummelen, E., Added mass effects of compressible and incompressible flows in fluid-structure interaction, J. Appl. Mech., 76, 2, 021206-021206-7 (2009) |
| [22] | Fernández, M.; Gerbeau, J.-F.; Grandmont, C., A projection semi-implicit scheme for the coupling of an elastic structure with an incompressible fluid, Int. J. Numer. Methods Eng., 69, 4, 794-821 (2005) · Zbl 1194.74393 |
| [23] | Küttler, U.; Wall, W., Fixed-point fluid-structure interaction solvers with dynamic relaxation, Comput. Mech., 43, 1, 61-72 (2008) · Zbl 1236.74284 |
| [24] | Badia, S.; Nobile, F.; Vergara, C., Fluid-structure partitioned procedures based on robin transmission conditions, J. Comput. Phys., 227, 7027-7051 (2008) · Zbl 1140.74010 |
| [25] | Baek, H.; Karniadakis, G., A convergence study of a new partitioned fluid-structure interaction algorithm based on fictitious mass and damping, J. Comput. Phys., 231, 2, 629-652 (2012) · Zbl 1426.76496 |
| [26] | Song, M.; Lefrançois, E.; Rachik, M., Development of a partitioned algorithm for fluid-structure coupling with no fluid density dependency, Comput. Fluids, 84, 190-202 (2013) · Zbl 1290.76074 |
| [27] | Lefrançois, E.; Brandely, A.; Mottelet, S., Strongly coupling partitioned scheme for enhanced added mass computation in 2D fluid-structure interaction, Coupled Syst. Mech. Int. J., 5, 3, 235-254 (2016) |
| [28] | Alderf, N.; Lefrançois, E.; Sergent, P.; Debaillon, P., Transition effects on ship sinkage in highly restricted waterways, J. Eng. Marit. Environ., 224, 2, 141-153 (2010) |
| [29] | Katz, J.; Plotkin, A., Low-Speed Aerodynamics, Cambridge Aerospace Series (2001), Cambridge University Press · Zbl 0976.76003 |
| [30] | Bertin, J.; Cummings, R., Aerodynamics for Engineers (2014), Pearson Edition |
| [31] | Mantia, M. L.; Dabnichki, P., Note on the physical basis of the Kutta condition in unsteady two-dimensional panel methods, Math. Probl. Eng., 708541 (2015) |
| [32] | Currie, I. G., Fundamental Mechanics of Fluids (1993), McGraw-Hill · Zbl 0353.76002 |
| [33] | Mantia, M. L.; Dabnichki, P., Added mass effect on flapping foil, Eng. Anal. Bound. Elem., 36, 4, 579-590 (2012) · Zbl 1351.76328 |
| [34] | Smith, A.; Hess, J., Calculation of Non-Lifting Potential Flow About Arbitrary Three-Dimensional Bodies, Technical Report E.S. 40622 (1962), Douglas Aircraft Company, Inc.: Douglas Aircraft Company, Inc. Long Beach, CA |
| [35] | Cebeci, T.; Platzer, M.; Chen, H.; Chang, K.-C.; Shao, J., Analysis of Low-Speed Unsteady Airfoil Flows (2005), Springer, Horizons Publishing |
| [36] | Loitsyanskiy, L., Mechanics of Liquids and Gases (1995), Begell House |
| [37] | Dhatt, G.; Touzot, G.; Lefrançois, E., Finite Element Method (2012), Wiley-IST · Zbl 1386.65002 |
| [38] | Thomson, W., On vortex motion, Trans. R. Soc. Edinb., 25, 1, 217-260 (1968) · JFM 01.0341.02 |
| [39] | Drela, M., XFOIL. Software Package, Ver. 6.97 (2008), MIT: MIT Cambridge, USA |
| [40] | Abbott, I.; von Doenhoff, A., Theory of Wing Sections (1959), Dover Publications |
| [41] | Jones, K.; Lund, T.; Platzer, M., Experimental and computational investigation of flapping wing propulsion for micro air vehicles, Progress in Astronautics and Aeronautics (2001), AIAA |
| [42] | Jones, K.; Platzer, M., Numerical computation of flapping-wing propulsion and power extraction, Proceedings of the 35th Aerospace Sciences Meeting Exhibit, Reno, NV, AIAA-97-0826 (1997) |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
