A two-stage multi-damage detection approach for composite structures using MKECR-Tikhonov regularization iterative method and model updating procedure. (English) Zbl 1481.74645
Summary: Modal kinetic energy (MKE)-based feature has been widely employed for the selection of optimal sensor layout; however, its development to the field of structural damage identification has still received less attention. The article hence is performed to fill in this research gap by proposing a two-stage multi-damage detection approach for composite structures by using MKE change ratio (MKECR) and model updating procedure, taking into consideration both spatially-incomplete measurements and noise. In the first stage, the MKECR-based method is used to construct the damage equation set and then a Tikhonov regularization-based iterative technique is employed to solve this equation set for the purpose of damage localization. In the second stage, the model updating procedure using Lightning Attachment Procedure Optimization (LAPO) algorithm is established and implemented for damage severity estimation, in which the MKE feature is introduced here as an objective function for the first time. Finally, the performance of the proposed two-stage damage detection approach is investigated through two numerical examples of different composite structures (beam and plate). The obtained results from the simulation examples reveal that the proposed identification approach can identify multi-damage locations and estimate their damage severities with satisfactory accuracy, even under spatially-incomplete measurements and high measurement noise.
MSC:
| 74R05 | Brittle damage |
| 65N21 | Numerical methods for inverse problems for boundary value problems involving PDEs |
Keywords:
two-stage approach; damage detection; modal kinetic energy; Tikhonov regularization; lightning attachment procedure optimization (LAPO); model updatingReferences:
| [1] | Gomes, G. F.; Alí, Y.; Mendéz, D.; Lopes, S.; Simões, S.; Carlos, A., The use of intelligent computational tools for damage detection and identification with an emphasis on composites – a review, Compos. Struct, 196, 44-54 (2018) |
| [2] | Gomes, G. F.; Mendez, Y. A.D.; da Silva Lopes Alexandrino, P.; da Cunha, S. S.; Ancelotti, A. C., A review of vibration based inverse methods for damage detection and identification in mechanical structures using optimization algorithms and ANN, Arch. Comput. Methods Eng., 4, 1-15 (2018) |
| [3] | Vosoughi, A. R.; Gerist, S., New hybrid FE-PSO-CGAs sensitivity base technique for damage detection of laminated composite beams, Compos. Struct., 118, 68-73 (2014) |
| [4] | Gomes, G. F.; da Cunha, S. S.; Ancelotti, A. C., A sunflower optimization (SFO) algorithm applied to damage identification on laminated composite plates, Eng. Comput., 35, 619-626 (2019) |
| [5] | Gomes, G. F.; de Almeida, F. A.; Junqueira, D. M.; da Cunha, S. S.; Ancelotti, A. C., Optimized damage identification in CFRP plates by reduced mode shapes and GA-ANN methods, Eng. Struct., 181, 111-123 (2019) |
| [6] | Dinh-Cong, D.; Vo-Duy, T.; Ho-Huu, V.; Nguyen-Thoi, T., Damage assessment in plate-like structures using a two-stage method based on modal strain energy change and Jaya algorithm, Inverse Probl. Sci. Eng., 27, 166-189 (2019) · Zbl 1464.74142 |
| [7] | Kumar, M.; Shenoi, R. A.; Cox, S. J., Experimental validation of modal strain energies based damage identification method for a composite sandwich beam, Compos. Sci. Technol., 69, 1635-1643 (2009) |
| [8] | Dinh-Cong, D.; Dang-Trung, H.; Nguyen-Thoi, T., An efficient approach for optimal sensor placement and damage identification in laminated composite structures, Adv. Eng. Softw., 119, 48-59 (2018) |
| [9] | Dinh-Cong, D.; Vo-Duy, T.; Nguyen-Minh, N.; Ho-Huu, V.; Nguyen-Thoi, T., A two-stage assessment method using damage locating vector method and differential evolution algorithm for damage identification of cross-ply laminated composite beams, Adv. Struct. Eng., 20, 1807-1827 (2017) |
| [10] | Montalvao, D., A review of vibration-based structural health monitoring with special emphasis on composite materials, Shock Vib. Dig., 38, 295-324 (2006) |
| [11] | Kim, J. T.; Ryu, Y. S.; Cho, H. M.; Stubbs, N., Damage identification in beam-type structures: frequency-based method vs mode-shape-based method, Eng. Struct., 25, 57-67 (2003) |
| [12] | Alvandi, A.; Cremona, C., Assessment of vibration-based damage identification techniques, J. Sound Vib., 292, 179-202 (2006) |
| [13] | Li, Y. Y., Hypersensitivity of strain-based indicators for structural damage identification: a review, Mech. Syst. Signal Process, 24, 653-664 (2010) |
| [14] | Stubbs, C. R.; Kim, N.; Farrar, J. T., Field verification of a nondestructive damage localization and severity estimation algorithm, (Proceedings of the 13th Int. Modal Anal. Conf. (IMAC XIII), 182 (1995)), 210-218 |
| [15] | Stubbs, N.; Kim, J.-T., Damage localization in structures without baseline modal parameters, AIAA J., 34, 1644-1649 (1996) · Zbl 0899.73393 |
| [16] | Shi, Z. Y.; Law, S. S.; Zhang, L. M., Structural damage localization from modal strain energy change, J. Sound Vib., 218, 825-844 (1998) |
| [17] | Hu, S. J.; Wang, S.; Li, H., Cross-modal strain energy method for estimating damage severity, J. Eng. Mech., 132, 429 (2006) |
| [18] | Seyedpoor, S. M., A two stage method for structural damage detection using a modal strain energy based index and particle swarm optimization, Int. J. Non. Linear. Mech., 47, 1-8 (2012) |
| [19] | Guo, H. Y.; Li, Z. L., Structural multi-damage identification based on modal strain energy equivalence index method, Int. J. Struct. Stab. Dyn., 14, Article 1450028 pp. (2014) |
| [20] | Li, Y.; Zhang, M.; Yang, W., Numerical and experimental investigation of modal-energy-based damage localization for offshore wind turbine structures, Adv. Struct. Eng., 21, 1510-1525 (2018) |
| [21] | Hu, H.; Wang, B.-T.; Lee, C.-H.; Su, J.-S., Damage detection of surface cracks in composite laminates using modal analysis and strain energy method, Compos. Struct., 74, 399-405 (2006) |
| [22] | Pradeep, K. R.; Rao, B. N.; Srinivasan, S. M.; Balasubramaniam, K., Modal strain energy change ratio for damage identification in honeycomb sandwich structures, Can. J. Basic Appl. Sci., 02, 10-24 (2014) |
| [23] | Vo-Duy, T.; Ho-Huu, V.; Dang-Trung, H.; Dinh-Cong, D.; Nguyen-Thoi, T., Damage detection in laminated composite plates using modal strain energy and improved differential evolution algorithm, Procedia Eng., 142, 181-188 (2016) |
| [24] | Yan, W.; Huang, T.; Ren, W., Damage detection method based on element modal strain energy sensitivity, Adv. Struct. Eng., 13, 1075-1088 (2010) |
| [25] | Entezami, A.; Shariatmadar, H., Damage detection in structural systems by improved sensitivity of modal strain energy and Tikhonov regularization method, Int. J. Dyn. Control., 2, 509-520 (2014) |
| [26] | Hadjian Shahri, A. H.; Ghorbani-Tanha, A. K., Damage detection via closed-form sensitivity matrix of modal kinetic energy change ratio, J. Sound Vib, 401, 268-281 (2017) |
| [27] | Dinh-Cong, D.; Vo-Van, L.; Nguyen-Quoc, D.; Nguyen-Thoi, T., Modal kinetic energy change ratio-based damage assessment of laminated composite beams using noisy and incomplete measurements, J. Adv. Eng. Comput., 3, 452-462 (2019) |
| [28] | Dinh-Cong, D.; Nguyen-Thoi, T.; Vinyas, M.; Nguyen, D. T., Two-stage structural damage assessment by combining modal kinetic energy change with symbiotic organisms search, Int. J. Struct. Stab. Dyn., 19, Article 1950120 pp. (2019) |
| [29] | Wang, S.; Xu, M.; Xia, Z.; Li, Y., A novel Tikhonov regularization-based iterative method for structural damage identification of offshore platforms, J. Mar. Sci. Technol., 24, 575-592 (2019) |
| [30] | A.N. Tikhonov, A. V. Goncharsky, V. V. Stepanov, A.G. Yagola, Numerical methods for the solution of ill-posed problems, 1995. doi:10.1007/978-94-015-8480-7. · Zbl 0831.65059 |
| [31] | Golub, G. H.; Hansen, P. C.; O’Leary, D. P., Tikhonov regularization and total least squares, SIAM J. Matrix Anal. Appl., 21, 185-194 (2003) · Zbl 0945.65042 |
| [32] | Fallah, N.; Vaez, S. R.H.; Fasihi, H., Damage identification in laminated composite plates using a new multi-step approach, Steel Compos. Struct., 29, 139-149 (2018) |
| [33] | Nematollahi, A. F.; Rahiminejad, A.; Vahidi, B., A novel physical based meta-heuristic optimization method known as Lightning Attachment Procedure Optimization, Appl. Soft Comput., 59, 596-621 (2017) |
| [34] | Meng, H. P.; Lin, X. Y., Damage orientation method based on the modal kinetic energy, Appl. Mech. Mater., 256-259, 1112-1116 (2012), doi:10.4028/www.scientific.net/AMM.256-259.1112 |
| [35] | Friswell, M. I.; Garvey, S. D.; Penny, J. E.T., Model reduction using dynamic and iterated IRS techniques, J. Sound Vib., 186, 311-323 (1995) · Zbl 1049.74725 |
| [36] | Lee, I.-W.; Jung, G.-H., An efficient algebraic method for the computation of natural frequency and mode shape sensitivities—Part I. Distinct natural frequencies, Comput. Struct., 62, 429-435 (1997) · Zbl 0912.73080 |
| [37] | Abdalla, M., Matrix norms and their sensitivity to noise a computational study, (Proceeding of the 5th WSEAS/IASME Int. Conf. Syst. Theory Sci. Comput (2015)), 238-242 |
| [38] | Mohamed, M.; Youssef, A.-R.; Kamel, S.; Ebeed, M., Lightning attachment procedure optimization algorithm for nonlinear non-convex short-term hydrothermal generation scheduling, Soft Comput., 2 (2020) |
| [39] | Dinh-Cong, D.; Van Hoa, N.; Nguyen-Thoi, T., An effective optimization-based parameterized interval analysis approach for static structural response with multiple uncertain parameters, Eng. Comput. (2019) |
| [40] | Foroughi Nematollahi, A.; Rahiminejad, A.; Vahidi, B.; Askarian, H.; Safaei, A., A new evolutionary-analytical two-step optimization method for optimal wind turbine allocation considering maximum capacity, J. Renew. Sustain. Energy., 10, Article 043312 pp. (2018) |
| [41] | Tran, N. T.; Le Chau, N.; Dao, T. P., An Effective Hybrid Approach of Desirability, Fuzzy Logic, ANFIS and LAPO Algorithm for Optimizing Compliant Mechanism (2020), Springer: Springer London |
| [42] | Tran, N. T.; Le Chau, N.; Dao, T. P., A hybrid computational method of desirability, fuzzy logic, ANFIS, and LAPO algorithm for multiobjective optimization design of scott russell compliant mechanism, Math. Probl. Eng., 2020 (2020) |
| [43] | Dinh-Cong, D.; Pham-Toan, T.; Nguyen-Thai, D.; Nguyen-Thoi, T., Structural damage assessment with incomplete and noisy modal data using model reduction technique and LAPO algorithm, Struct. Infrastruct. Eng., 15, 1436-1449 (2019) |
| [44] | Vo-Duy, T.; Nguyen-Minh, N.; Dang-Trung, H.; Tran-Viet, A.; Nguyen-Thoi, T., Damage assessment of laminated composite beam structures using damage locating vector (DLV) method, J. Contemp. Phys., 50, 457-465 (2015) |
| [45] | Reddy, J., Mechanics of Laminated Composite Plates and Shells: Theory and Analysis (2003), CRC Press |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
