ICCM2015: study on elastic matrix model of the bi-modulus finite element numerical method. (English) Zbl 1359.74458
Summary: Bi-modulus materials exhibit the different modulus in tension and compression. The value of elastic modulus and Poisson ratio of every point in the bi-modulus elastic body not only depend on the material itself, but also the stress state and the strain state of the point. The uncertainty and nonlinearity of the elastic constitutive relation result in that the bi-modulus elastic problem is the complicated nonlinear problem This paper aims at studying the bi-modulus elastic constitutive equation employed in the bi-modulus finite element numerical method (FEM). The new elastic matrix model is proposed based on Ye’s principal strain criterion with the assumption that the Poisson ratio maintain constant whenever in tension or in compression, and the elastic matrix is symmetric by equivalent transmitting. The shear modulus expression of this elastic matrix model is derived to enable the elastic matrix completely and improve the convergence of the FEM calculation. The statically indeterminate bi-modulus beam is analyzed by means of FEM employing the proposed elastic matrix model. The effects of the tensile modulus to compressive modulus ratio and the boundary condition on the stress and deflection of the bi-modulus beam is studied.
MSC:
| 74S05 | Finite element methods applied to problems in solid mechanics |
| 74B20 | Nonlinear elasticity |
| 65N30 | Finite element, Rayleigh-Ritz and Galerkin methods for boundary value problems involving PDEs |
References:
| [1] | Ambartsumyan, S. A. [1986] Elasticity Theory of Different Moduli (Trans. by Wu, R. F. and Zhang, Y. Z.). (China Railway Publishing House, Beijing, China). |
| [2] | He, X. T., Chen, S. L. and Sun, J. Y. [2007] ” Elasticity solution of simple beams with different modulus under uniformly distributed load,” Eng. Mech. (in Chinese)24(10), 51-56. |
| [3] | He, X., Zheng, Z. and Sun, J. [2009] ” Convergence analysis of a finite element method based on different moduli in tension and compression,” Int. J. Solids Struct.46, 3734-3740. genRefLink(16, ’S021987621641019XBIB003’, ’10.1016 · Zbl 1183.74282 |
| [4] | Johns, R. M. [1977] ” Stress-strain relations for materials with different moduli in tension and compression,” AIAA J.15(1), 16-23. genRefLink(16, ’S021987621641019XBIB004’, ’10.2514 |
| [5] | Liu, X. [2001] ” Analysis of the dam’s stress and shift using finite element method with different elastic modula,” Mech. Eng.23(4), 39-42. |
| [6] | Liu, X. and Zhang, Y. [2000a] ” Initial stress technique under condition of {\(\theta\)} and accelerate convergence of bi-moduli problem,” Eng. Mech. (in Chinese)A1, 182-186. |
| [7] | Liu, X. and Zhang, Y. [2000b] ” Modulus of elasticity in shear and accelerate convergence of different extension-compression elastic modulus finite element method,” J. Dalian Univ. Technol. (in Chinese)40(5), 526-530. · Zbl 1168.74458 |
| [8] | Vijayakumar, K. and Rao, K. P. [1987] ” Stress-strain relation for composites with different stiffness in tension and compression-a new model,” Int. J. Comput. Mech.1(2), 167-175. genRefLink(16, ’S021987621641019XBIB008’, ’10.1007 · Zbl 0699.73046 |
| [9] | Wu, X., Huang, C. and Sun, J. [2012] ” Kantorovich solution of bi-modulus cantilever beam under distributed loads,” J. Hunan Univ. Sci. Technol. (in Chinese)27(2), 55-59. |
| [10] | Yang, Q., Zheng, B. L., Zhang, K. et al. [2014] ” Elastic solutions of a functionally graded cantilever beam with different modulus in tension and compression under bending loads,” Appl. Math Model.27(2), 1403-1416. genRefLink(16, ’S021987621641019XBIB010’, ’10.1016 · Zbl 1427.74100 |
| [11] | Yao, W. J. and Ye, Z. M. [2004] ” Analytical solution for bending beam subject to lateral force with different modulus,” Appl. Math. Mech. (English Edition)25(10), 1107-1117. genRefLink(16, ’S021987621641019XBIB011’, ’10.1007 · Zbl 1137.74390 |
| [12] | Ye, Z. M. [1997] ” A new finite element formulation for planar elastic deformation,” Int. J. Numer. Methods Eng.40, 2579-2591. genRefLink(16, ’S021987621641019XBIB012’, ’10.1002 · Zbl 0890.73075 |
| [13] | Ye, Z. M., Chen, T. and Yao, W. J. [2004] ” Progress of theory and finite element method on different modulus elasticity,” Mech. Eng. (in Chinese)26(2), 9-14. |
| [14] | Ye, Z. M., Yu, H. R. and Yao, W. J. [2001a] ” A new elasticity and finite element formulation for different Young’s modulus when tension and compression loading,” J. Shanghai Univ. (English Edition)5(2), 89-92. genRefLink(16, ’S021987621641019XBIB014’, ’10.1007 · Zbl 1068.74610 |
| [15] | Ye, Z. M., Yu, H. R. and Yao, W. J. [2001b] ” A finite element formulation for different Young’s modulus when tension and compression loading,” Proc. Com2 Mac Conf. Computational Mathematics, South Korea, Pohang University of Science and Technology. · Zbl 1068.74610 |
| [16] | Zhang, Y. Z. and Wang, Z. F. [1989] ” The finite element method for elasticity with different moduli in tension and compression,” Comput. Struct. Mech. Appl. (in Chinese), 6(1), 236-246. |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
