Theoretical analysis of five-point bending and springback for preforming process of ERW pipe FFX forming. (English) Zbl 1435.74014
Summary: Flexible forming excellent (FFX) forming of electric resistance welding (ERW) pipe is an advanced roll forming method. In order to understand FFX forming mechanism and set reasonable roll parameters, five-point bending process and springback process for preforming section of ERW pipe FFX forming are analyzed. Under various assumptions, the bending process of sheet metal is divided into full elastic bending stage and elastic-plastic bending stage by analyzing the forming law and simplifying the contact state model of roll bending process. Based on the theory of plane bending theory, the five-point bending springback model is established. Mathematical expressions of bending curvature and rotation angle of arbitrary particle on plate under arbitrary state are derived. The curvature calculation formulas of each particle on plate after springback are obtained, and then the calculation formulas of bending angle and rebound angle after springback are obtained. The theoretical analysis results are verified by the wide plate five-point bending experiment. The theoretical value of springback angle agrees well with the experimental results. The maximum deviation of springback angle is 0.42 degrees. The results show that the five-point bending model is reasonable. It provides theoretical support for the preforming model of flexible roll forming.
MSC:
| 74C99 | Plastic materials, materials of stress-rate and internal-variable type |
| 74S99 | Numerical and other methods in solid mechanics |
References:
| [1] | Peng, Z., Development trend of straight welded pipe mills both at home and abroad, Steel Pipe, 4, 13-18 (1998) |
| [2] | Jiang, J.; Li, D.; Peng, Y., Research on strip deformation in the cage roll-forming process of ERW round pipes, Journal of Materials Processing Technology, 209, 10, 4850-4856 (2009) · doi:10.1016/j.jmatprotec.2009.01.011 |
| [3] | Lindgren, L. E., Roll forming, Handbook of Manufacturing Engineering and Technology, 13, 285-307 (2016) |
| [4] | Cai, Z. Y.; Sui, Z.; Cai, F. X., Continuous flexible roll forming for three-dimensional surface part and the forming process control, The International Journal of Advanced Manufacturing Technology, 66, 1-4, 393-400 (2013) · doi:10.1007/s00170-012-4333-7 |
| [5] | Joo, B. D.; Han, S. W.; Shin, S. G. R.; Moon, Y. H., Flexible roll forming process design for variable cross-section profile, International Journal of Automotive Technology, 16, 1, 83-88 (2015) · doi:10.1007/s12239-015-0009-2 |
| [6] | Mäntyjärvi, K.; Merklein, M.; Karjalainen, J. A., UHS steel formability in flexible roll forming, Key Engineering Materials, 410-411, 661-668 (2009) · doi:10.4028/www.scientific.net/KEM.410-411.661 |
| [7] | Hu, Z.; Li, M.; Cai, Z., Continuous flexible forming of three-dimensional surface parts using bendable rollers, Materials Science and Engineering: A Structural, 499, 1-2, 234-237 (2009) · doi:10.1016/j.msea.2007.11.107 |
| [8] | Heo, S.-C.; Seo, Y.-H.; Park, J.-W.; Ku, T.-W.; Kim, J.; Kang, B.-S., Application of flexible forming process to hull structure forming, Journal of Mechanical Science and Technology, 24, 1, 137-140 (2010) · doi:10.1007/s12206-009-1119-4 |
| [9] | Abeyrathna, B.; Rolfe, B.; Pan, L.; Ge, R.; Weiss, M., Flexible roll forming of an automotive component with variable depth, Advances in Materials and Processing Technologies, 2, 4, 527-538 (2016) · doi:10.1080/2374068X.2016.1247234 |
| [10] | Hu, S., Discussing technical innovation of national ERW pipe based on Japanese developments of welded pipe technology, Welded Pipe, 29, 6, 53-57 (2006) |
| [11] | Ji, X.; Zhang, H.; Ma, H., Discussion on the development and research of the technology of large diameter HFW pipe in abroad and domestic, Welded Pipe, 32, 8, 10-15 (2009) |
| [12] | Li, M.; Liu, Y.; Su, S.; Li, G., Multi-point forming: a flexible manufacturing method for a 3-d surface sheet, Journal of Materials Processing Technology, 87, 1-3, 277-280 (1999) · doi:10.1016/S0924-0136(98)00364-1 |
| [13] | Wagoner, R. H.; Lim, H.; Lee, M.-G., Advanced issues in springback, International Journal of Plasticity, 45, 3-20 (2013) · doi:10.1016/j.ijplas.2012.08.006 |
| [14] | Carden, W. D.; Geng, L. M.; Matlock, D. K.; Wagoner, R. H., Measurement of springback, International Journal of Mechanical Sciences, 44, 1, 79-101 (2002) · Zbl 0986.74503 · doi:10.1016/S0020-7403(01)00082-0 |
| [15] | Chen, L., Finite element simulation of springback in sheet metal forming, Applied Mechanics and Materials, 50-51, 615-618 (2011) · doi:10.4028/www.scientific.net/AMM.50-51.615 |
| [16] | Wagoner, R. H.; Li, M., Simulation of springback: through-thickness integration, International Journal of Plasticity, 23, 3, 345-360 (2007) · Zbl 1349.74378 · doi:10.1016/j.ijplas.2006.04.005 |
| [17] | Zhao, J.; Yin, J.; Ma, R.; Ma, L., Springback equation of small curvature plane bending, Science China Technological Sciences, 54, 9, 2386-2396 (2011) · Zbl 1237.74016 · doi:10.1007/s11431-011-4447-4 |
| [18] | Zhao, J.; Zhai, R.; Qian, Z.; Ma, R., A study on springback of profile plane stretch-bending in the loading method of pretension and moment, International Journal of Mechanical Sciences, 75, 10, 45-54 (2013) · doi:10.1016/j.ijmecsci.2013.06.008 |
| [19] | Zhao, J.; Zhan, P.; Ma, R.; Zhai, R., Prediction and control of springback in setting round process for pipe-end of large pipe, International Journal of Pressure Vessels and Piping, 116, 1, 56-64 (2014) · doi:10.1016/j.ijpvp.2014.01.006 |
| [20] | Liu, C.; Yue, T.; Li, D., A springback prediction method for a cylindrical workpiece bent with the multi-point forming method, The International Journal of Advanced Manufacturing Technology, 12, 1-13 (2018) |
| [21] | Jun, Z.; Jian, L.; Xiaoyang, Q.; Gang, W.; Honglei, S.; Rui, M., Study on intelligent control technology for forming steel pipe of pipeline with JCO process, Science China Technological Sciences, 54, 10, 2754-2759 (2011) · Zbl 1239.93077 · doi:10.1007/s11431-011-4532-8 |
| [22] | Sun, H.; Song, X.; Ma, R.; Zhao, J., Theoretical analysis of JCO forming and springback for sheet metal four-point bending in manufacture of LSAW pipe, Journal of Mechanical Engineering, 25, 2, 257-262 (2014) |
| [23] | Li, Y.; Zhao, J.; Zhan, P., Theoretical analysis of sheet metal free bending and springback, Journal of Plastic Engineering, 16, 4, 1-6 (2009) |
| [24] | Li, J., Research on JCO intelligent control technology for forming the large diameter longitudinal-seam submerged Arc welded pipe with JCO process, Yanshan University, 2009 |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
