×

Nonlinear temperature field near the stack ends of a standing-wave thermoacoustic refrigerator. (English) Zbl 1227.80010

Summary: The nonlinear temperature field in the vicinity of the stack of a standing-wave thermoacoustic refrigerator is investigated both theoretically and experimentally. First, the problem is addressed theoretically by a one-dimensional nonlinear model that predicts the generation of thermal harmonics near the ends of the stack. The model relies on a relaxation-time approximation to describe transverse heat transfer between the stack walls and the working fluid. It extends a previous model proposed by [V. Gusev et al., “Thermal wave harmonics generation in the hydrodynamical heat transport in thermoacoustics”, J. Acoust. Soc. Am. 109, 84–90 (2001; doi:10.1121/1.1332383)], by including the effect of axial conduction on temperature fluctuations. Second, the nonlinear temperature field is investigated experimentally. The amplitude of temperature fluctuations behind the stack at the fundamental frequency and second harmonic are measured using cold-wire anemometry. The measurements rely on a procedure recently developed by the authors that allows a full correction of the thermal inertia of the sensor. Experimental results are in good agreement with the predictions of the model. The generation of thermal harmonics behind the stack is thus validated. The influence of the Péclet number on the thermal field, which depends on the diffusivity of the working fluid and on the acoustic frequency and pressure level, is also demonstrated.

MSC:

80A20 Heat and mass transfer, heat flow (MSC2010)
76Q05 Hydro- and aero-acoustics
80-05 Experimental work for problems pertaining to classical thermodynamics
Full Text: DOI

References:

[1] Berson, A.; Blanc-Benon, Ph.: Nonperiodicity of the flow within the gap of a thermoacoustic couple at high amplitudes, J. acoust. Soc. am. 122, EL122-EL127 (2007)
[2] A. Berson, Vers la miniaturisation des réfrigérateurs thermoacoustiques: Caractérisation du transport non-linéaire de chaleur et des écoulements secondaires, Ph.D dissertation (in French), Ecole Centrale de Lyon, ECL-2007-41 (2007).
[3] A. Berson, Ph. Blanc-Benon, ”Nonlinear heat transport between the stack and the heat-exchangers of standing-wave thermoacoustic refrigerators”, in: Proceedings of the 18th International Symposium on Nonlinear Acoustics, Stockholm, July 7 – 10, 2008, AIP Conference Proc. 1022, p. 359 – 362.
[4] Berson, A.; Blanc-Benon, Ph.; Comte-Bellot, G.: A strategy to eliminate all nonlinear effects in constant-voltage anemometry, Rev. sci. Instrum. 80, 045102 (2009)
[5] Berson, A.; Poignand, G.; Blanc-Benon, Ph.; Comte-Bellot, G.: Capture of instantaneous temperature in oscillating flows: use of constant-voltage anemometry to correct the thermal lag of cold wires operated by constant-current anemometry, Rev. sci. Instrum. 81, 015102 (2010)
[6] Berson, A.; Blanc-Benon, Ph.; Comte-Bellot, G.: On the use of hot-wire anemometry in pulsating flows. A comment on ’A critical review on advanced velocity measurement techniques in pulsating flows’, Meas. sci. Tech. 21, No. 12, 128001 (2010)
[7] Besnoin, E.; Knio, O.: Numerical study of thermoacoustic heat exchangers, Acta acustica united with acustica 90, 432-444 (2004)
[8] Freymuth, P.: Velocity-induced harmonics for the thin-wire resistance thermometer, J. phys. E: sci instrum. 12, 351-352 (1979)
[9] Gusev, V.; Lotton, P.; Bailliet, H.; Job, S.; Bruneau, M.: Relaxation-time approximation for analytical evaluation of temperature field in thermoacoustic stack, J. sound vibr. 235, 711-726 (2000)
[10] Gusev, V.; Lotton, P.; Bailliet, H.; Job, S.; Bruneau, M.: Thermal wave harmonics generation in the hydrodynamical heat transport in thermoacoustics, J. acoust. Soc. am. 109, 84-90 (2001)
[11] Huelsz, G.; Ramos, E.: Temperature measurements inside the oscillatory boundary layer produced by acoustic waves, J. acoust. Soc. am. 103, 1532-1537 (1998)
[12] Karpov, S.; Prosperetti, A.: A nonlinear model of thermoacoustic devices, J. acoust. Soc. am. 112, 1431-1444 (2002)
[13] Liu, J.; Garrett, S. L.: Relationship between Nusselt number and the thermoviscous (Rott) functions, J. acoust. Soc. am. 119, 1457-1462 (2006)
[14] Marx, D.; Blanc-Benon, Ph.: Numerical simulation of stack-heat exchangers coupling in a thermoacoustic refrigerator, Aiaa j. 42, No. 7, 1338-1347 (2004)
[15] Marx, D.; Blanc-Benon, Ph.: Computation of the temperature distortion in the stack of a standing-wave thermoacoustic refrigerator, J. acoust. Soc. am. 118, 2993-2999 (2005)
[16] Matveev, K. I.; Swift, G. W.; Backhaus, S.: Temperatures near the interface between an ideal heat exchanger and a thermal buffer tube or pulse tube, Int. J. Heat mass transfer 49, 868-878 (2006)
[17] Matveev, K. I.; Swift, G. W.; Backhaus, S.: Analytical solution for temperature profiles at the ends of thermal buffer tubes, Int. J. Heat mass transfer 50, 897-901 (2007) · Zbl 1124.80348 · doi:10.1016/j.ijheatmasstransfer.2006.08.004
[18] Mozurkewich, G.: Heat transfer from transverse tubes adjacent to a thermoacoustic stack, J. acoust. Soc. am. 110, 841-847 (2001)
[19] Sarma, G. R.: Transfer function analysis of the constant voltage anemometer, Rev. sci. Instrum. 69, 2385-2391 (1998)
[20] Sarma, G. R.; Lankes, R. W.: Automated constant voltage anemometer with in situ measurements of overheat and time constant of the hot wire, Rev. sci. Instrum. 70, 2384-2386 (1999)
[21] Shi, L.; Mao, X.; Jaworski, A. J.: Application of planar laser induced fluorescence measurement techniques to study heat transfer characteristics of parallel-plate heat exchangers in thermoacoustic devices, Meas. sci. Technol. 21, No. 11, 115405 (2010)
[22] Swift, G. W.: Thermoacoustic engines, J. acoust. Soc. am. 84, 1145-1180 (1988)
[23] Wetzel, M.; Herman, C.: Experimental study of thermoacoustic effect on a single plate part I: Temperature fields, Heat mass transf. 36, 7-20 (2000)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.