×

Numerical simulation of single- and multi-mode film boiling using lattice Boltzmann method. (English) Zbl 1443.65259

Summary: In the present article, we extend the dynamic model of Lee to investigate film boiling numerically based on the Lattice Boltzmann method. The phase-change process is modeled by incorporating a proper source term at the phase interface, and then the extension of the classical convective Cahn-Hilliard’s equation in the presence of phase change is employed in the multiphase LB framework of Lee. In the first step, the two-dimensional Rayleigh-Taylor instability is modeled. Comparing the results with the other computational results reveals the consistency of our method. Then the model is extended to simulate single- and multiple-mode film boiling. The results of simulation are compared with the previous analytical correlations. In addition, the effects of Jacob number on the interface dynamic, Nusselt number, film thickness and maximum velocity are illustrated. In this simulation, the bubble temperature is assumed not to be constant, which makes the simulation more usable and realistic.

MSC:

65M75 Probabilistic methods, particle methods, etc. for initial value and initial-boundary value problems involving PDEs
76A20 Thin fluid films
76M28 Particle methods and lattice-gas methods
82C26 Dynamic and nonequilibrium phase transitions (general) in statistical mechanics
Full Text: DOI

References:

[1] Mikic, B. B.; Rohsenow, W. M.; Griffith, P., On bubble growth rates, Int. J. Heat Mass Transfer, 13, 657-666 (1970)
[2] Prosperetti, A.; Plesse, M. S., Vapour-bubble growth in a superheated liquid, J. Fluid Mech., 85, 349-368 (1978)
[3] Lee, R.; Nydahl, J., Numerical calculation of bubble growth in nucleate boiling from inception through departure, J. Heat Transfer, 111, 474-479 (1989)
[4] Welch, S., Direct simulation of vapor bubble growth, Int. J. Heat Mass Transfer, 41, 1655-1666 (1998) · Zbl 0935.76054
[5] Son, G.; Dhi, V.; Ramanujapu, N., Dynamics and heat transfer associated with a single bubble during nucleate boiling on a horizontal surface, J. Heat Transfer, 121, 623-631 (1999)
[6] Kunkelmann, C.; Stephan, P., CFD simulation of boiling flows using the volume-of-fluid method within open FOAM, Numer. Heat Transfer, 56, 631-646 (2009)
[7] Juric, D.; Tryggvason, G., Computations of boiling flows, Int. J. Multiph. Flow, 24, 387-410 (1998) · Zbl 1121.76455
[8] Esmaeeli, A.; Tryggvason, G., Computations of film boiling. Part I: numerical method, Int. J. Heat Mass Transfer, 47, 5451-5461 (2004) · Zbl 1121.76489
[9] Esmaeeli, A.; Tryggvason, G., Computations of film boiling. Part II: multi-mode film boiling, Int. J. Heat Mass Transfer, 47, 5463-5476 (2004) · Zbl 1121.76490
[10] Akhtar, M. W.; Kleis, S. J., Boiling flow simulations on adaptive octree grids, Int. J. Multiph. Flow, 53, 88-99 (2013)
[11] Zhang, R.; Chen, H., Lattice Boltzmann method for simulations of liquid-vapor thermal flows, Phys. Rev. E, 67-066711 (2003)
[12] Hazi, G.; Markus, A., On the bubble departure diameter and release frequency based on numerical simulation results, Int. J. Heat Mass Transferer, 52, 1472-1480 (2009) · Zbl 1157.80335
[13] Shan, X.; Chen, H., Lattice Boltzmann model for simulating flows with multiple phases and components, Phys. Rev. E, 47-1815 (1993)
[14] Dong, Z.; a, W. L.; Song, Y., A numerical investigation of bubble growth on and departure from a superheated wall by lattice Boltzmann method, Int. J. Heat Mass Transfer, 53, 4908-4916 (2010) · Zbl 1197.80037
[15] Ryu, S.; Ko, S., Direct numerical simulation of nucleate pool boiling using a two-dimensional lattice Boltzmann method, Nucl. Eng. Des., 248-262 (2012)
[16] Gong, S.; Cheng, P., Lattice Boltzmann simulation of periodic bubble nucleation, growth and departure from a heated surface in pool boiling, Int. J. Heat Mass Transfer, 64, 122-132 (2013)
[17] Lee, T., Effects of incompressibility on the elimination of parasitic currents in the lattice Boltzmann equation method for binary fluids, Comput. Math. Appl, 58, 5, 987-994 (2009) · Zbl 1189.76414
[18] Safari, H.; Rahimian, M. H.; Krafczyk, M., Extended lattice Boltzmann method for numerical simulation of thermal phase change in two-phase fluid flow, Phys. Rev. E., 88-013304 (2013)
[19] Begmohammadi, A.; Farhadzadeh, M.; Rahimian, M. H., Simulation of pool boiling and periodic bubble release at high density ratio using lattice Boltzmann method, Int. Commun. Heat Mass Transfer, 61, 78-87 (2015)
[20] Lee, T., Effects of incompressibility on the elimination of parasitic currents in the lattice Boltzmann equation method for binary fluids, Comput. Math. Appl., 58, 5, 987-994 (2009) · Zbl 1189.76414
[21] Lee, T.; Liu, L., Lattice Boltzmann simulations of micron-scale drop impact on dry surfaces, J. Comput. Phys., 229, 8045-8063 (2010) · Zbl 1426.76603
[22] Lee, T.; Fischer, P. F., Eliminating parasitic currents in the Lattice Boltzmann equation method for non-ideal gases, Phys. Rev. E, 74-046709 (2006)
[23] Inamuro, T.; Yoshino, M.; Inoue, H.; Mizuno, R.; Ogino, F., A lattice Boltzmann method for a binary miscible fluid mixture and its application to a heat-transfer problem, J. Comput. Phys., 179, 1, 201-215 (2002) · Zbl 1065.76164
[24] Lee, H. G.; Kim, J., Numerical simulation of the three-dimensional Rayleigh-Taylor instability, Comput. Math. Appl., 66, 1466-1474 (2013)
[25] He, X.; Chen, S.; Zhang, R., A lattice Boltzmann scheme for incompressible multiphase flow and its application in simulation of Rayleigh-Taylor instability, J. Comput. Phys., 152, 642-663 (1999) · Zbl 0954.76076
[26] Sharp, D. H., An overview of Rayleigh-Taylor instability, Physica D, 12, 3-10 (1984) · Zbl 0577.76047
[27] Tryggvason, G., Numerical simulations of the Rayleigh-Taylor instability, J. Comput. Phys., 75, 253-282 (1988) · Zbl 0638.76056
[28] Berenson, P. J., Film Boiling heat transfer from a horizontal surface, J. Heat Transfer, 83, 351-358 (1961)
[29] Klimenko, V. V.; Shelepen, A. G., Film boiling on a horizontal plate-a supplementarycommunications, Int. J. Heat Mass Transfer, 25, 1611-1613 (1982)
[30] Zuber, N., On the instabilityof boiling heat transfer, Trans. ASME, 80, 711-720 (1958)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.