Robust \(\mu\)-synthesis controllers for suppressing stick-slip induced vibrations in oil well drill strings. (English) Zbl 1379.74017
Summary: Stick-slip friction is a major cause of drill-string failure. This paper addresses the problem of suppressing stick-slip induced oscillations in oil well drill strings using a control design technique known as \(\mu\)-synthesis. This technique allows for the inclusion of modeling errors in the control design process in terms of uncertainty weights. The dynamic model of the drill string with stick-slip friction is highly nonlinear and has to be linearized around an operating point in order to use \(\mu \)-synthesis. The difference between the linear and nonlinear models is characterized in terms of uncertainty weights and included in the control design process. The designed controllers are robust to uncertainty in the dynamic model, spillover, actuator uncertainty, and noise. Two controllers were designed using \(\mu\)-synthesis and the simulation results are presented and discussed here. The first controller assumes no measurement delay; however, the second controller includes a sensor time delay in the measurements. Both controllers are robust and performed well.
MSC:
| 74M05 | Control, switches and devices (“smart materials”) in solid mechanics |
| 74B20 | Nonlinear elasticity |
| 74K10 | Rods (beams, columns, shafts, arches, rings, etc.) |
| 93B50 | Synthesis problems |
| 93B51 | Design techniques (robust design, computer-aided design, etc.) |
Software:
Mu Analysis and Synthesis ToolboxReferences:
| [1] | Abdulgalil, F., Siguerdidjane, H.: Backstepping design for controlling rotary drilling system. In: Proceedings of 2005 IEEE Conference on Control Applications, pp. 120–124 (2005) |
| [2] | Abdulgalil, F., Siguerdidjane, H.: PID based on sliding mode control for rotary drilling system. In: Proceedings of EUROCON 2005 Conference, pp. 262–265 (2005) |
| [3] | Al-Hiddabi, S.A., Samanta, B., Seibi, A.: Nonlinear control of torsional and bending vibrations of oil well drill strings. J. Sound Vib. 265, 401–415 (2003) · Zbl 1236.74098 · doi:10.1016/S0022-460X(02)01456-6 |
| [4] | Balas, G.J., Doyle, J.C., Glover, K., Packard, A., Smith, R.: {\(\mu\)} Analysis and Synthesis Toolbox. MUSYN and the Mathworks Inc. (1995) |
| [5] | Brett, J.F.: The genesis of torsional drill string vibrations. In: SPE Drilling Engineering, pp. 168–174 (1992) |
| [6] | Canudas-de-Wit, C., Corchero, M.A., Rubio, F.R., Navarro-Lopez, E.: D-OSKIL: a new mechanism for suppressing stick-slip in oil well drill strings. In: 44th IEEE Conference on Decision and Control and 2005 European Control Conference, CDC-ECC ’05, pp. 8260–8265 (2005) |
| [7] | Chevallier, A.: Nonlinear stochastic drilling vibrations. PhD Thesis, Rice University, Department of Mechanical Engineering and Material Science, Houston, Texas (2000) |
| [8] | Christoforou, A.P., Yigit, A.S.: Fully coupled vibrations of actively controlled drilstrings. J. Sound Vib. 267, 1029–1045 (2003) · doi:10.1016/S0022-460X(03)00359-6 |
| [9] | Doyle, J.C.: Analysis of feedback systems with structured uncertainties. Proc. IEEE, D 129, 242–250 (1982) |
| [10] | Hernandez-Suarez, R., Puebla, H., Aguilar-Lopez, R., Hernandez-Martinez, E.: An integral high-order sliding mode control approach for stick-slip. J. Petroleum Sci. Technol. 27, 788–800 (2009) · doi:10.1080/10916460802455483 |
| [11] | Jansen, J.D., van den Steen, L.: Active damping of self-excited torsional vibrations in oil well drill strings. J. Sound Vib. 179(4), 647–668 (1995) · doi:10.1006/jsvi.1995.0042 |
| [12] | Karkoub, M.A.: Robust control of a flexible slider-crank mechanism using {\(\mu\)}-synthesis. Mechatronics J. 10(6), 649–668 (2000) · doi:10.1016/S0957-4158(99)00083-5 |
| [13] | Leine, R.I., van Campen, D.H., Keultjes, W.J.G.: Stick-slip whirl interaction in drill string dynamics. J. Vib. Acoust. 124, 209–220 (2002) · doi:10.1115/1.1452745 |
| [14] | Mihajlovic, N., Van Veggel, A.A., Van de Wouw, N., Nijmeijer, H.: Analysis of friction-induced limit cycling in an experimental drill-string system. ASME J. Dyn. Syst. Meas. Control 126, 709–720 (2004) · doi:10.1115/1.1850535 |
| [15] | Mihajlovic, N., Van de Wouw, N., Rosielle, P.C.J.N., Nijmeijer, H.: Interaction between torsional and lateral vibrations in flexible rotor systems with discontinuous friction. Non. Dyn., author pre-print (2007) |
| [16] | Navarro-Lopez, E.M., Suarez, R.: Practical approach to modeling and controlling stick-slip oscillations in oil well drill strings. In: Proceedings of the 2004 IEEE International Conference on Control Applications, vol. 2, pp. 1454–1460 (2004) |
| [17] | Pavone, D.R., Desplans, J.P.: Application of high sampling rate downhole measurements for analysis and cure of stick-slip in drilling, SPE 28324. Paper presented at the SPE 69th Annual Technical Conference and Exhibition held in New Orleans, 25–28 September 1994 |
| [18] | Placido, J.C.R., Santos, H.M.R., Galeano, Y.D.: Drill string vibration and wellbore instability. J. Energy Resour. Technol. 124 (2002) |
| [19] | Serrarens, A.F.A.: H control as applied to torsional drill-string dynamics. MSc. thesis, Eidhoven University of Technology, The Netherlands (2002) |
| [20] | Smit, A.T.: Using of optimal control techniques to dampen torsional drill strings vibrations. PhD thesis, University of Twente (1999) |
| [21] | Spanos, P.D., Chevallier, A.M., Politis, N.P., Payne, M.L.: Oil and gas well drilling: a vibrations perspective. The Shock Vib. Dig. 35, 85–103 (2003) · doi:10.1177/0583102403035002564 |
| [22] | Tucker, R.W., Wang, C.: On the effective control of torsional vibrations in drilling systems. J. Sound Vib. 224(1), 101–122 (1999) · doi:10.1006/jsvi.1999.2172 |
| [23] | Van den Steen, L.: Suppressing stick-slip-induced drill string oscillations: a hyperstability approach. Ph.D. Thesis, University of Twente, Faculty of Electrical Enginiering and Applied Physics (1997) |
| [24] | Vinnecombe, G.: Measuring robustness of feedback systems. PhD dissertation, Department of Engineering, Cambridge (1993) |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
