Processing and characterization of epitaxial GaAs radiation detectors
Abstract
GaAs devices have relatively high atomic numbers (Z=31, 33) and thus extend the X-ray absorption edge beyond that of Si (Z=14) devices. In this study, radiation detectors were processed on GaAs substrates with 110 - 130 μm thick epitaxial absorption volume. Thick undoped and heavily doped p+ epitaxial layers were grown using a custom-made horizontal Chloride Vapor Phase Epitaxy (CVPE) reactor, the growth rate of which was about 10 μm / h. The GaAs p+/i/n+ detectors were characterized by Capacitance Voltage (CV), Current Voltage (IV), Transient Current Technique (TCT) and Deep Level Transient Spectroscopy (DLTS) measurements. The full depletion voltage (Vfd) of the detectors with 110 μm epi-layer thickness is in the range of 8-15 V and the leakage current density is about 10 nA/cm2. The signal transit time determined by TCT is about 5 ns when the bias voltage is well above the value that produces the peak saturation drift velocity of electrons in GaAs at a given thickness. Numerical simulations with an appropriate defect model agree with the experimental results.
- Publication:
-
Nuclear Instruments and Methods in Physics Research A
- Pub Date:
- October 2015
- DOI:
- 10.1016/j.nima.2015.03.028
- arXiv:
- arXiv:1503.04009
- Bibcode:
- 2015NIMPA.796...51W
- Keywords:
-
- GaAs;
- Solid state radiation detectors;
- Wafer processing;
- Defect characterization;
- TCAD simulations;
- Physics - Instrumentation and Detectors
- E-Print:
- 7 pages, 10 figures, 10th International Conference on Radiation Effects on Semiconductor Materials, Detectors and Devices (RESMDD14), 8-10 October, Firenze, Italy