Abstract
Safety programmable logic controllers (S-PLCs) provide broad application options and are being used to perform control but primarily safety functions (SFs) on the process control level. An essential part of control systems based on S-PLC is the sensors and actuators. In order to ensure the SF with high safety integrity level (SIL), the control system performing this SF has to dispose of a suitable failure detection mechanism and a mechanism providing its safe reaction in case of a failure detection. The diagnostics provided by S-PLC is mainly focused on its own components, and the diagnostics of sensors and actuators has to be resolved on the application program level while respecting some specific properties of S-PLC. This paper addresses the analysis of the influence of S-PLC parameters and diagnostic parameters on the safety function SIL, which is performed by a safety relevant electronic system. In the practical part is described the implementation of application diagnostics in S-PLC and the results of diagnostic parameters influence on safety integrity of SF for a selected example connected to a practical application.
Similar content being viewed by others
References
Naghshbandy AH, Shanechi HM, Kazemi A et al (2010) Study of fault location effect on the inter-area oscillations in stressed power systems using modal series method. Electr Eng 92(1):17–26. doi:10.1007/s00202-010-0154-6
Urresty JC, Riba JR, Romeral L et al (2015) Mixed resistive unbalance and winding inter-turn faults model of permanent magnet synchronous motors. Electr Eng 97(1):75–85. doi:10.1007/s00202-014-0316-z
Göktaş T, Arkan M, Özgüven ÖF (2015) Detection of rotor fault in three-phase induction motor in case of low-frequency load oscillation. Electr Eng 97(4):337–345. doi:10.1007/s00202-015-0342-5
Moujahed M, Azza HB, Frifita K et al (2016) Fault detection and fault-tolerant control of power converter fed PMSM. Electr Eng 98(2):121–131. doi:10.1007/s00202-015-0350-5
Behjat V, Vahedi A (2013) An experimental approach for investigating low-level interturn winding faults in power transformers. Electr Eng 95(2):135–145. doi:10.1007/s00202-012-0248-4
Stapelberga RF (2009) Handbook of reliability, availability, maintainability and safety in engineering design. Springer, London
Ždánsky J, Rástočný K (2014) Influence of redundancy on safety integrity of SRCS with safety PLC. In: ELEKTRO 2014. ELEKTRO 10th international conference, pp 508–512. ISBN: 978-1-4799-3721-9
Schwarz MH, Borcsok J (2013) Reliable system design with a high degree of diagnostic procedures for embedded systems. In: Signals and systems conference (ISSC 2013), 24th IET irish, pp 1–7. DOI:10.1049/ic.2013.0048
Sammarco JJ (2007) Programmable electronic and hardwired emergency shutdown systems: a quantified safety analysis. IEEE Trans on Ind Appl 43(4):1061–1068. doi:10.1109/TIA.2007.900477
Ždánsky J, Nagy P (2012) Influence of the control system structure with safety PLC on its reliability and safety. In: Proceedings of the 9th international conference ELEKTRO 2012, Rajecké Teplice. IEEE Catalog Number: CFP1248S-ART, p. TA4_25, ISBN 978-1-4673-1178-6
Rástočný K, Ždánsky J (2015) Hazardous failure rate of the safety function. In: Conference: 15th international conference on transport systems telematics (TST), Wroclaw, Poland. Date: APR 15-17, 2015, Tools of Transport telematics book series: communications in computer and information science 531: 284–291, Published: 2015. DOI:10.1007/978-3-319-24577-5_28, Publisher Springer-verlag Berlin. ISBN:978-3-319-24577-5; 978-3-319-24576-8
Bukowski JV, van Beurden I (2009) Impact of proof test effectiveness on safety instrumented system performance. In: Reliability and maintainability symposium, 2009. RAMS 2009. pp 157–163. Annual DOI:10.1109/RAMS.2009.4914668
EN 61 508 (2010) Functional safety of electrical/electronic/programmable electronic safety-related systems
Rástočný K, Ilavský J (2010) Effects of a periodic maintenance on the safety integrity level of a control system. FORMS/FORMAT 2010—formal methods for automation and safety in railway and automotive systems, pp 77–85. ISBN: 978-364214260-4, source type: conference proceeding. Doi:10.1007/978-3-642-14261-1-8D
Ždánsky J, Rástočný K, Hrbček J (2015) Influence of architecture and diagnostic to the safety integrity of SRECS output part. In: 20th International conference on applied electronics, AE 2015, Pilsen, Czech Republic, 8-9 September 2015, pp 297–301. Category number CFP1569A-PRT; Code 117286, ISBN: 978-802610385-1
Rástočný K, Ždánsky J (2012) Specificities of safety PLC based implementation of the safety function. In: Proceedings of international conference applied electronics, AE 2012, Pilsen, pp 229-232. ISBN 978-80-261-0038-6, ISSN 1803-7232
Rástočný K, Franeková M, Zolotová I, Rástočný K Jr (2014) Quantitative assessment of safety integrity level of message transmission between safety-related equipment. J Comput Inf 33:1001–1026 ISSN: 1335-9150
Rástočný K et al. Safety validation of the system NEXUS. Contract for co-operation by the research activities between První Signální Ostrava and University of Žilina, No. 1/2010 and 2/2012
Acknowledgements
This paper has been supported by the Educational Grant Agency of the Slovak Republic (KEGA) Number: 034ŽU-4/2016: implementation of modern technologies focusing on control using the safety PLC into education.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rástočný, K., Ždánsky, J., Balák, J. et al. Diagnostics of an output interface of a safety-related system with safety PLC. Electr Eng 99, 1169–1178 (2017). https://doi.org/10.1007/s00202-017-0624-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00202-017-0624-1