PT boat

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "PT boat" – news · newspapers · books · scholar · JSTOR (January 2013) (Learn how and when to remove this message)

PT boats were a variety of torpedo-armed fast attack craft used by the United States Navy in World War II to attack larger surface ships. "PT" is the US hull classification symbol for "Patrol Torpedo". The PT boat squadrons were nicknamed "the mosquito fleet". The Japanese called them "devil boats".

The original pre–World War I torpedo boats were designed with "displacement" hulls. They displaced up to 300 tons and the top speed was 25 to 27 kn (29 to 31 mph; 46 to 50 km/h). The PT boats used in World War II were built using the planing-type hull form developed for racing boats. They were much smaller (30–75 tons) and faster (35 to 40 kn (40 to 46 mph; 65 to 74 km/h)). Both types were designed to strike at larger warships with torpedoes, using relatively high speed to get close, and small size to avoid being spotted and hit by gunfire. They were much less expensive than large warships. PT boats were much faster, smaller, and cheaper than conventional (displacement hull) vessels.

During World War II, American PT boats engaged enemy destroyers and numerous other surface craft, ranging from small boats to large supply ships. PT boats also operated as gunboats against enemy small craft, such as armored barges used by the Japanese forces for inter-island transport.

The primary anti-ship armament was two to four Mark 8 torpedoes, which each weighed 2,600 pounds (1,179 kg) and contained a 466-pound (211 kg) TNT warhead. These torpedoes were launched by Mark 18 21-inch (530 mm) steel torpedo tubes. Mark 8 torpedoes had a range of 16,000 yards (14,630 m) at 36 knots (41 mph). Common to all US PT boats were two twin M2 .50 cal (12.7 mm) machine guns. Another automatic weapon commonly mounted on PT boats was the Oerlikon 20 mm cannon. All U.S. PT boats were powered by three 12-cylinder gasoline-fueled engines running on high octane aviation gasoline (AvGas). These engines were built by the Packard Motor Car Company, and were a modified design of the 3A-2500 V-12 liquid-cooled aircraft engine.

The first mention of high speed motor boats for the US Navy was in 1916 when a Michigan boat designer offered to build in numbers for $20,000 each, a 55mph boat, that mounted on the bow a torpedo and two machine guns. Nothing became of this private offer.^[1] But as early as 1922, the US Navy reconsidered using small internal combustion engine powered torpedo boats. As a result, two types of WW1 vintage British Royal Navy Coastal Motor Boats were obtained for testing. After failing the testing period, the small boats were rejected from further consideration.^[2] Then 17 years later, in 1939, the U.S. Navy renewed their investigation into the concept by requesting competitive bids for several different types of motor torpedo boats. This competition led to eight prototype boats built to compete in two different classes. The first class was for 55-foot (17 m) boats, and the second class was for 70-foot (21 m) boats. The resulting PT boat designs were the product of a small cadre of respected naval architects and the Navy.

On 8 June 1939, contracts were let to the Fogal Boat Yard, Inc., later known as the Miami Shipbuilding Co., of Miami, Florida, for PT-1 and -2 "Crash Boats",^[3] and to the Fisher Boat Works, Detroit, Michigan, for PT-3 and -4.^[4] These four boats were essentially the Crouch design, modified in some details by the Bureau of Ships.

Then were the three boats built by Andrew Jackson Higgins of Higgins Industries in New Orleans. These boats were PT-5 and PT-6 (built using government-required Sparkman and Stephens design, scaled to an overall length of 81 feet (25 m)) and then PT-6 "Prime" which was redesigned by Andrew Higgins personally using his own methods. Later that same year, Higgins was to build PT-70 that incorporated slight improvements over PT-6 Prime.

The Philadelphia Navy Yard simultaneously began construction of two other boats (PT-7 and PT-8), created by designers at the Navy Yard and the Navy Bureau of Ships. These boats were constructed mainly out of aluminum and had 4 engines.

Henry R. Stuphen of Electric Launch Company (Elco) and his designers (Irwin Chase, Bill Fleming, and Glenville Tremaine) visited the United Kingdom to see British motor torpedo boat designs. While visiting the British Power Boat Company, they purchased a 70-foot (21 m) design (PV70) (later renamed PT-9 during the competition), designed by Hubert Scott-Paine. This boat PT-9 was to serve as the prototype for all future Elco designed PT Boats.

The final competitor for the contract was Huckins Yacht Corporation of Jacksonville, Florida, which came up with competing 72-foot (22 m) boat class designs. PT-69

The competition monetary prizes for each of the designs were paid to all of these competitors by the US government. However, rigorous testing performed on each design revealed problems that had to be fixed before they could meet required performance specifications. As a result, the Navy ordered further investigation and refinement of the existing designs until a satisfactory working design could be obtained.

Background

Back in March 1941, during a heavy weather run from Key West to New York by MTBRon 2, Elco 70-footers pounded heavily in 8 to 10 foot waves even at moderate speeds, and seas continuously broke high over the bows. Operating personnel reported extreme discomfort and fatigue. All boats suffered from some sort of structural failure (forward chine guards ripped away, bottom framing under bows broken, side planking cracked (indicating lack of longitudinal strength), and other weaknesses). In April 1941, MTBRon 1 reported enthusiasm over the 81-foot Higgins (PT-6) and with the Higgins showing such good seakeeping, that further purchase of Scott-Paine boats was unnecessary. And, in early 1941, BuShips lent Packard engines to both Huckins and Higgins, which wanted to build competitive boats at their own expense.

An OPNAV PT Conference held in May 1941, convened to discussed future PT characteristics. All PTs prior to the 77 ft Elcos had been found defective, and it was probable that the extended 70 ft Elco would not be an improvement. This conference, that included representatives from BuShips, BuOrd, MTBRons, Interior Control Board, and OPNAV, recommended a series of comparative tests to evaluate what turned out to be five new designs of motor torpedo boats. Of note, the conference strongly recommended that no more Elco 77-footers be ordered until the tests had shown that they were indeed satisfactory.

The Board of Inspection and Survey, headed by Rear Admiral J.W. Wilcox, conducted these comparative service tests^[5] off New London, 21 to 24 July 1941, using the following boats:

• PT-6: 81 ft (25 m) Higgins; 3 Packard 1,200-hp engines.
• PT-8: 81 ft (25 m) Philadelphia Navy Yard; aluminum hull; 2 Allison 2,000-hp engines, 1 Hall-Scott 550-hp engine.
• PT-20: 77 ft (23 m) Elco; 3 Packard 1,200-hp engines; equipped with special propellers; special strengthening added to hull framing and deck.
• PT-26, -30, -31, -33: Same as PT-20, except with standard propellers and without special strengthening.
• PT-69: 72 ft (22 m) Huckins; 4 Packard 1,200-hp engines.
• PT-70: 76 ft (23 m) Higgins; 3 Packard 1,200-hp engines.
• One 70 ft (21 m) MRB (Motor Rescue Boat) boat built for the Dutch Navy by Higgins; 3 Hall-Scott 900-hp engines.

Each member of the Board conducted an independent inspection of every boat class, evaluating them for structural sufficiency, habitability, access, arrangement for attack control, and communication facilities.^[5]

Boats were also evaluated under two conditions of armament loading; The first loaded and fully equipped with four 21" torpedoes and sufficient fuel to operate 500 NM at 20 knots; and the other fully loaded with two 21 inch torpedoes and ten 300 lb depth charges with sufficient fuel to operate 500 NM at 20 knots.^[5]

Boats would have their tactical diameters of each design determined by photographs from an airship.^[5]

Lastly, there was a demonstration of seakeeping qualities and hull strength by making a run at maximum sustained speed in the open ocean. Accelerometers were installed in the pilot house of each design to record "pounding". This open-sea run of 190 NM at full throttle would forever after be referred to by PT personnel as the "Plywood Derby." The course started from the mouth of New London Harbor, to Sarah Ledge, then led around the eastern end of Block Island, then around Fire Island Lightship, finishing at Montauk Point Whistling Buoy.^[5]

At the time, only the Elco 77-footers had the actual ordnance loadout. The rest of the competitors had copper ingots added topside (mostly in the turrets) to make up the difference. This resulted in severe conditions for several of the boats during the final 190 NM course and accounted for the transverse failure in PT-70 main deck and subsequent hull failure as the copper plunged into the hull.

Nine boats participated in the 190 NM run (PT-26 had previously developed deck failures while conducting standardization trials of Block Island on July 21, 1941), and six boats completed the run (PT-33 suffered structural damage off Block Island and withdrew, PT-70 suffered its damage from the ingots and withdrew, and MRB developed engine trouble at the start of the run and withdrew).^[5]

By Class, the Elco 77-footer (23 m) (PT-20) came in first with an average speed of 39.72 kn (45.71 mph), followed by (PT-31) with an average speed of 37.01 kn (42.59 mph), then the Huckins 72-foot (22 m) boat (PT-69) with an average speed of 33.83 kn (38.93 mph) (note the Huckins experienced a high pressure oil failure and was DIW for some of the time during the repair), the Higgins 81-footer (25 m) (PT-6) with an average speed of 31.4 kn (36.1 mph), and the Philadelphia Navy Yard boat (PT-8) last with 30.75 kn (35.39 mph). The other two Elco boats, PT-30 and PT 23 (Standby Boat) followed PT-31, placing before PT-69. The Accelerometers ranked the boats as follows: First was the Philadelphia Navy Yard PT-8 with the least pounding, Second was the Huckins PT-69, Third was the Higgins PT-6, and last were the Elco 77-footers with the greatest pounding.^[5]

Due to the problem with ingot loading, a second 185 NM run (with PTs fully fitted out) was conducted several weeks later on August 12, 1941. Four boats returned PT-8, PT-69, PT-70 and MRB, and Elco sent two new boats PT-21 and PT-29. During this run, boats faced heavier seas with waves as high as 16 feet encountered. All except the Huckins (PT-69) completed the run. The Huckins withdrew due to bilge stringer failure. The Higgins 76-footer (PT-70) completed the entire run but also suffered structural failures, attachments between planking and web frames pulling loose, and deck fastenings in the neighborhood of engine hatches showing extensive failures. PT-21 suffered minor crack in the deck in the same location (but not to the same extent) as previously observed in PT-26, PT-30, and PT-33. PT-29 was assigned as a pace boat with PT-8 in order to generate a pounding comparison.^[5]

The average speed results from the 185 NM course were as follows: Elco 77-footer (PT-21) with 27.5 kn (31.6 mph), Higgins 76-footer (PT-70) with 27.2 kn (31.3 mph), Higgins MRB and Philadelphia Navy Yard boat (PT-8) with 24.8 kn (28.5 mph). Accelerometers were again installed in the pilot house of each boat, but the readings were incomplete because the violent motion of the boats made observations extremely difficult and in some cases necessitated abandonment of the observing stations. Further, many of those taken were beyond the normal range of the instruments and were considered inaccurate. Elco boats were found to pound heavily and confirmed previous reports of their discomfort.^[5]

The Elco 77-Footer Design Demonstrates:^[5]

1. Ability to make a maximum sustained speed of 39.7 knots; maximum speed 44.1 knots with heavy ordnance load.
2. Maneuverability satisfactory except for a large turning circle of 432 yards.
3. Space available for four 21" torpedo tubes.
4. Structural weaknesses resulting in transverse fractures of deck planking.
5. Tendency to pound heavily in a seaway.
6. Fittings and finish unnecessarily refined.
7. Cost to the Government fully equipped $302,100.

The Huckins 72-Foot Design Demonstrates:^[5]

1. Ability to make a maximum sustained speed of 33.8 knots; maximum speed 43.8 knots with light ordnance load.
2. Maneuverability satisfactory with a turning circle of 336 yards.
3. Space available for two 21" torpedo tubes and ten 300 lb. depth charges.
4. Structural weaknesses resulting in fracture of bilge stringers.
5. Very little tendency to pound in a seaway.
6. Fittings and finish appropriate for a motor torpedo boat.
7. Cost to the Government fully equipped $263,500.

The Navy Yard Philadelphia 81-Foot Design Demonstrates:^[5]

1. Ability to make a maximum sustained speed of 30.7 knots; maximum speed 33.9 knots with light ordnance load.
2. Maneuverability unsatisfactory due to inability to reverse outboard engines with a large turning circle of 443 yards.
3. Space available for two 21" torpedo tubes and ten 300 lb. depth charges.
4. Structural strength is adequate.
5. Tendency to pound severely in a seaway.
6. Fittings (Navy standard for combatant ships) entirely too heavy and cumbersome for this type of craft. Finish adequate.
7. Cost to the Government fully equipped $756,400.

The Higgins 81-Foot Design Demonstrates:^[5]

1. Ability to make a maximum sustained speed of 31.4 knots; maximum speed 34.3 knots with heavy ordnance load.
2. Maneuverability satisfactory with a turning circle of 368 yards.
3. Space available for four 21" torpedo tubes.
4. Structural strength adequate.
5. Moderate tendency to pound in a seaway.
6. Fittings and finish satisfactory.
7. Cost to the Government fully equipped $206,600.

The Higgins 76-Foot Design Demonstrates:^[5]

1. Maximum sustained speed of 27.2 knots in rough seas; maximum speed 40.9 knots.
2. Maneuverability satisfactory, turning circle not determined photographically, estimated 300 yards.
3. Space available for four 21" torpedo tubes.
4. Structural weaknesses caused failures in transverse bottom framing, separation of side planking from framing and extensive failures of deck fastenings.
5. Moderate tendency to pound in a seaway.
6. Fittings and finish satisfactory.
7. Cost to the Government fully equipped $265,500.

The Board arrived at the following recommendations:^[5]

1. That the Packard power plant having been found highly satisfactory be adopted as standard for future construction.
2. That the ordnance installation of future motor torpedo boats consist of two torpedo tubes, machine guns and depth charges.
3. That the Huckins 72-Foot (PT-69) design be considered acceptable for immediate construction.
4. That the Higgins 81-Foot (PT-6) design suitably reduced in size to carry such ordnance loads as are required by our Navy be considered acceptable for immediate construction.
5. That the Elco 77-Foot design be considered acceptable for fur future construction provided changes in the lines are made to reduce the tendency to pound in a seaway, and the structure is strengthened in a manner acceptable to the Bureau of Ships.
6. That the Philadelphia 81-Foot boat (PT-8) be stripped of excess weight and be re-engined with three Packard engines.

The Board also had the following opinion on structural sufficiency: "During the first series of tests (July 21–24) the Huckins design (PT-69), the Philadelphia design (PT-8) and the Higgins design (PT-6) completed the open sea endurance run without structural damage. The Higgins 70' (British) boat did not complete this run because of engine trouble. The Higgins 76' (PT-70) and boats of the Elco 77' (PT-20 Class) developed structural failures even under moderate weather conditions prevailing. In the interval between the first and second test periods the PT-70 was repaired and an effort made to eliminate the causes of the structural failures. However, during the second endurance run, which was made in a very rough sea for this size boat, structural failures again occurred in PT-70. PT-69 and PT-21 experienced structural failures during the second run though these were much localized as compared with those found on PT70. The Board is of the opinion that certain changes in design are required to enable PT-69 and boats of the PT-20 Class to carry safely their military loads in rough weather."^[5]

The Board results provided very important benchmarks in the infancy of PT Boat development. This type of craft presented design challenges that were still issues decades after, but there are some significant conclusions from the above recommendations and their order of merit. Those are:^[5]

1. The Packard engines were the engines of choice.
2. The Huckins 72-foot (PT-69) and a reduced Higgins 81-foot (PT-6) were to be placed into production. Following an October 1941 BuShips conference and its new set of navy design requirements which included room to support four 21" torpedoes and an upper length restriction of 82', the next two orders for pre-war PT Boats would go to Higgins and Huckins.
3. Even though the Elco 77-Footers posted the fastest speeds, all seven Elco's suffered from structural damage and severe pounding causing the Board to recommend a re-design to correct these deficiencies. Elco received the next pre-war PT boat order after Higgins and Huckins. This was to be their new Elco 80-foot design.

The Elco Naval Division boats were the longest of the three types of PT boats built for the Navy used during World War II. By war's end, more of the Elco 80 ft (24 m) boats were built than any other type of motor torpedo boat (326 of their 80 ft (24 m) boats were built). The 80 ft (24 m) wooden-hulled craft were classified as boats in comparison with much larger steel-hulled destroyers, but were comparable in size to many wooden sailing ships in history. They had a 20 ft 8 in (6.30 m) beam. Though often said to be made of plywood, they were actually made of two diagonal layered 1 in (25 mm) thick mahogany planks, with a glue-impregnated layer of canvas in between. Holding all this together were thousands of bronze screws and copper rivets. This type of construction made it possible for damage to the wooden hulls of these boats to be easily repaired at the front lines by base force personnel. Five Elco Boats were manufactured in knock-down kit form and sent to Long Beach Boatworks for assembly on the West Coast as part of an experiment and as a proof of concept.

Higgins Industries of New Orleans, Louisiana produced 199 78 ft (24 m) boats of the PT-71 or PT-235 or PT-625 classes. The Higgins boats had the same beam, full load displacement, engine, generators, shaft power, trial speed, armament, and crew accommodation as the 80 ft (24 m) Elco boats. Many Higgins boats were sent to the Soviet Union and Great Britain at the beginning of the war, so many of the lower-numbered squadrons in the U.S. Navy were made up exclusively of Elcos. US PT boats were organized into Motor Torpedo Boat Squadrons (MTBRONs or simply RONs). The first Higgins boats for the U.S. Navy were used in the Battle for the Aleutian Islands (Attu and Kiska) as part of Squadrons 13 and 16, and others (RON15 and RON22) in the Mediterranean against the Germans. They were also used during the D-Day landings on 6 June 1944.

Even though only half as many Higgins boats were produced, far more survive (seven hulls, three of which have been restored to their World War II configuration) than the more numerous Elco boats. Of the Elco boats, only three hulls (one restored) are known to exist at this time.

Frank Pembroke Huckins and his innovative Quadraconic hull design were late players to the PT Boat design. Not invited to participate in the original design competition, by late 1940, Frank Huckins had a meeting with CAPT James M. Irish, Chief of Design of BuShips, and offered to build a "planing seagoing hull" PT boat, on the condition that Navy would loan Huckins engines and agree to look at the Huckins boat. In early July 1941, the Navy accepted PT-69. After obtaining excellent testing results at the Plywood Derby, the US Navy awarded Huckins Yacht Corporation a PT design contract in 1941 for 8 boats, and later added 10 more. The design was enlarged and modified to meet the new mandatory Navy requirements. The first three of the new design (PT-95 thru PT-97) were initially kept in the Jacksonville area for testing, resulting in several important modifications to the overall design of the boats (these boats were later assigned to Squadron 4 in 1942). Huckins ended up building just two squadrons of PT boats during World War II. Five 78-foot (24 m) boats were assigned to Squadron 14 (PT-98 thru PT-102) which was commissioned in early 1943; and ten boats assigned to Squadron 26 (PT-255 thru PT-264) which was commissioned in mid 1943. They were assigned to specific outposts in the Panama Canal Zone, Miami, Florida, the Hawaiian Sea Frontier at Pearl Harbor and Midway, and a training center in Melville, Rhode Island.

Although not used in any other PT Boat design, the patriotic Huckins licensed the use of his patented Quadraconic hull in his PT boat construction. Huckins also granted permission for Elco, Higgins and the Philadelphia Navy Yard to use his patented laminated keel, which increased hull strength, although neither Elco nor Higgins ever chose to use the Huckins design on their boats; they instead used designs of their own. Most probably due to the lateness in joining the PT Boat program and unlike Elco and Higgins, the Huckins yard was never provided any government support to construct a larger facility prior to the war. The handcrafted Huckins PT was produced at their civilian facility at a speed of one per month. During the Board of Survey testing, the Elco 77-Footers made the best speed showing with Elco edging the Huckins PT-69 in light and heavy loaded speed tests (45.3 kn (52.1 mph) versus 43.8 kn (50.4 mph)),^[6] however the Huckins had a tighter turning circle (Huckins 336-P/368-S yards in diameter compared to Elco 432-P/382-S yards in diameter) and pounding factor (Elco pounded 61% more than Huckins). The success and ruggedness of the Huckins' 78-Foot seagoing design, is evident by Squadron 26's constant ready-boat operations and Fleet torpedo boat training in the oceans around Midway and Hawaii during the last two years of the war.

During World War II, the Vosper Boat Company of Great Britain arranged for several boatyards in the U.S. to build British-designed 70 ft (21 m) motor torpedo boats under license to help the war effort. The boatyards were located in Annapolis, City Island NY, Miami and Los Angeles. 146 boats, armed with 18 in (460 mm) torpedoes, were built for Lend Lease, exported to Allied powers such as Canada, Britain, Norway, and the Soviet Union. They were never used by the U.S. Navy, and only about 50 were used by the Royal Navy, and most were passed to other countries.

In addition, the Canadian Power Boat Company produced four Scott-Paine designed PTs for the U.S., which were also to be Lend Lease to the Dutch forces, but were re-requistioned to USN as PT 368-371.

With accommodation for three officers and 14 enlisted men, the crew varied from 12 to 17, depending upon the number and type of weapons installed. Full-load displacement late in the war was 56 tons.

The hull shape of a PT boat was similar to the "planing hull" found in pleasure boats of the time (and still in use today): a sharp V at the bow softening to a flat bottom at the stern. PT boats were intended to plane at higher speeds, just like pleasure boats. The Elco and Higgins companies both used lightweight techniques of hull construction which included two layers of double diagonal mahogany planking utilizing a glue-impregnated cloth layer between inner and outer planks. These planks were held together by thousands of copper rivets and bronze screws. The overall result was an extremely light and strong hull, yet it could be easily repaired from battle damage at the front lines.

As a testament to the strength of this type of construction, several PT boats withstood catastrophic battle damage and still remained afloat. For example, the forward half of future President John F. Kennedy's PT-109 (Elco) stayed afloat for 12 hours after she was cut in half by the Japanese destroyer Amagiri. PT-323 (Elco) was cut in half by a kamikaze aircraft on 10 December 1944 off Leyte, yet remained floating for several hours. PT-308 (Higgins) had her stern sheared off by a collision with PT-304 during a night mission in the Mediterranean on 9 March 1945 and yet returned to base for repairs. PT-167 (Elco) was holed through the bow off Bougainville on 5 November 1943, by a torpedo which failed to detonate; the boat remained in action and was repaired the next day.

In 1943, an inquiry was held by the Navy to discuss planing, hull design, and fuel consumption issues, but no major modifications were made before the end of the war. (Wooden Boat Forum) During the war, both Elco and Higgins came up with stepped hull designs which achieved significant increases in top speed, ("ElcoPlane" and "Higgins Hellcat") but the Navy rejected them for full production due to their increased fuel consumption and other considerations.

After the war Lindsay Lord, who was stationed in Hawaii during the war, recorded the Navy's planing hull research and findings in the book "Naval Architecture of Planing Hulls". This is the single best source of information on PT Boat hull design and construction, and provides hull test data as well as detailed analysis of the various PT Boat designs.^[7]

The primary anti-ship armament was two to four Mark 8 torpedoes, which weighed 2,600 pounds (1,179 kg) and contained a 466-pound (211 kg) TNT warhead. These torpedoes were launched by Mark 18 21-inch (530 mm) steel torpedo tubes. Mark 8 torpedoes had a range of 16,000 yards (14,630 m) at 36 knots (41 mph). These torpedoes and tubes were replaced in mid-1943 by four lightweight 22.5-inch-diameter (570 mm) Mark 13 torpedoes, which weighed 2,216 pounds (1,005 kg) and contained a 600-pound (270 kg) Torpex-filled warhead. These torpedoes were carried on lightweight Mark 1 roll-off style torpedo launching racks. The Mk13 torpedo had a range of 6,300 yards (5,800 m) and a speed of 33.5 knots (38.6 mph).

PT boats were also well armed with numerous automatic weapons. Common to all US PT boats were the two twin M2 .50 cal (12.7 mm) machine guns. Early PT boats (Elco PT20 through PT44) mounted Dewandre plexiglas-enclosed hydraulically operated rotating turrets.^[8] Almost immediately after the attack on Pearl Harbor, the Dewandre turrets were replaced on the entire PT boat fleet with open ring twin mounts. The ring mount was designed by both Elco and Bell, and designated Mark 17 Twin 50 caliber aircraft mount.^[9] Part of the Mark 17 Mod 1 and Mod 2 ring mount consisted of the Bell Mark 9 twin cradle.^[10][11] Another automatic weapon commonly mounted on PT boats was the 20 mm Oerlikon cannon. On early series of boats, this cannon was mounted on the stern. Later in the war, several more of these 20 mm cannons were added amidships and on the forward deck.

Forward of the chart house of some early Elco 77-foot (23 m) boats (PT20 through PT44) were twin .30 cal (7.62 mm) Lewis machine guns on pedestal mounts. Beginning in mid-1943, some boats were fitted with one or two .30 cal Browning machine guns on the forward torpedo racks on pedestal mounts.

Occasionally, some front line PT boats received ad hoc up-fits at forward bases, where they mounted such weapons as 37mm aircraft cannons, rocket launchers, or mortars. When these weapons were found to be successful, they were incorporated onto the PT boats as original armament. One such field modification was made to Kennedy's PT-109, which was equipped with a single-shot Army M3 37mm anti-tank gun that her crew had commandeered; they removed the wheels and lashed it to 2x8 timbers placed on the bow only one night before she was lost. The larger punch of the 37mm round was desirable, but the crews looked for something that could fire faster than the single-shot army anti-tank weapon. Their answer was found in the 37mm Oldsmobile M4 aircraft automatic cannon cannibalized from crashed P-39 Airacobra fighter planes on Henderson Field, Guadalcanal. After having demonstrated its value on board PT boats, the M4 (and later M9) cannon was installed at the factory. The M4/M9 37mm auto cannon had a relatively high rate of fire (125 rounds per minute) and large magazine (30 rounds). These features made it highly desirable due to the PT boat's ever-increasing requirement for increased firepower to deal effectively with the Japanese daihatsu barges, which were largely immune to torpedoes due to their shallow draft. By the war's end, most PTs had these weapons.

The culmination of larger-bore cannons resulted in the installation of the 40mm Bofors gun^[12] on the aft deck. Starting in mid-1943, the installation of this gun had an immediate positive effect on the firepower available from a PT boat. The Bofors cannon had a firing rate of 120 rounds/min (using 4-round clips) and had a range of 5,420 yards (4,960 m). This gun was served by a crew of 4 men, and was used against aircraft targets, as well as shore bombardment or enemy surface craft.

Towards the end of the war, beginning in 1945, PTs received two eight-cell Mark 50 rocket launchers,^[13] launching 5 in (130 mm) spin-stabilized flat trajectory Mark 7 and/or Mark 10 Rockets^[14] with a range of 11,000 yards (10,000 m). These 16 rockets plus 16 reloads gave them as much firepower as a destroyer's 5-inch (130 mm) guns. By war's end, the PT boat had more "firepower-per-ton" than any other vessel in the U.S. Navy.

PT boats also commonly carried between two and eight U.S. Navy Mark 6 depth charges in roll-off racks. Additionally, a few PT boats were equipped to carry naval mines launched from mine racks, but these were not in common usage. Although not a weapon, U.S. Navy PTs also were fitted with Raytheon SO radar, which had about a 17 nm range. Having radar gave Navy PTs a distinct advantage in intercepting enemy supply barges and ships at night.

All U.S. PT boats were powered by three 12-cylinder gasoline-fueled engines. These engines were built by the Packard Motor Car Company, and were a modified design of the 3A-2500 V-12 liquid-cooled aircraft engine. The 3A-2500 was an improved version of the 2A engine used on the Huff-Daland XB-1 Liberty bomber of World War I vintage. Packard modified them for marine use in PTs, hence the "M" designation instead of "A". (i.e., 3A-2500 then 3M-2500). The three successive versions of these engines were designated as 3M-2500, 4M-2500, and 5M-2500, each of which had slight improvements over the previous version. Their aircraft roots gave them many features of aircraft engines, such as superchargers, intercoolers, dual magnetos, two spark plugs per cylinder, and so on. Packard built the Rolls-Royce Merlin aero engine under license alongside the 4M-2500, but with the exception of the PT-9 prototype boat brought from England for Elco to examine and copy, the Merlin was never used in PTs.

The 4M-2500s initially generated 1200 hp (895 kW) each, together roughly the same power as a Boeing B-17 bomber. They were subsequently upgraded in stages to 1500 hp (1,150 kW) each, for a designed speed of 41 knots (76 km/h (47 mph)). The final engine version, the Packard 5M-2500, (late 1945) had a larger supercharger, aftercooler, and power output of 1850 hp. This much power could push the fully loaded boats at 45 to 50 knots (51-57 mph). However, using the older 4M-2500 engines, increases in the weight of the boats due to more weaponry offset the potential increase in top speed. Fuel consumption of these engines was phenomenal; a PT boat carried 3,000 gallons (11,360 liters) of 100 octane avgas. A normal patrol for these boats would last a maximum of 12 hours. The consumption rate for each engine at a cruising speed of 23 knots was about 66 gallons (250 l) per hour (200 gallons [760 l] per hour for all 3 engines). However, at top speed, consumption increased to 166 gallons (628 l) per hour per engine (or 500 gallons [1,890 l] per hour for all 3 engines). Navy acceptance trials for every boat required it be able to demonstrate ability to achieve design speed of 41+ knots. Going at this speed, the 3,000 gallons of fuel would be used in only about 6 hours. Wartime conditions such as hull fouling and engine wear could sometimes cause the boats' top speed to be degraded until maintenance could be performed.

Originally conceived as anti-ship weapons, PT boats were publicly credited with sinking several Japanese warships during the period between December 1941 and the fall of the Philippines in May 1942.^[15] Attacking at night, PT crews may have sometimes failed to note a possible torpedo failure. Although the American Mark 8 torpedo did have problems with porpoising and circular runs, it could and did have success against common classes of targets.^[15] The Mark 3 and Mark 4 exploders were not subject to the same problems as the Mark 6 exploders on U.S. submarines' Mark 14 torpedoes. Introduction of the Mark 13 torpedo to PT boats in mid-1943 all but eliminated the early problems that PT boats had with their obsolete Mark 8s.^[15]

PTs would usually attack at night. The cockpits of PT boats were protected against small arms fire and splinters by armor plate. Direct hits from Japanese guns could and did result in catastrophic gasoline explosions with near-total crew loss.^{[citation needed]} They feared attack by Japanese seaplanes, which were hard to detect even with radar, but which could easily spot the phosphorescent wake left by PT propellers. Bombing attacks killed and wounded crews even with near misses.^[15] There are several recorded instances of PT boats trading fire with friendly aircraft,^[15] a situation also familiar to U.S. submariners. Several PT boats were lost due to "friendly fire" from both Allied aircraft and destroyers.^[15]

Initially, only a few boats were issued primitive radar sets. Later in the war, as more PTs were fitted with dependable radar, they developed superior night-fighting tactics and used them to locate and destroy many enemy targets.^[15] During the Guadalcanal and Solomon Island campaigns in 1942–1943, the PT boats of Squadron (RON) 2, 3, 5 and 6 would lie in wait to ambush a target from torpedo range (generally about 1,000 yards (910 m)).^[15] During some of these nighttime attacks, the PT boats' position may have been given away by a flash of light caused by grease inside the black-powder-actuated Mark XIII torpedo tubes catching fire during the launching sequence. In order to avoid return fire by the enemy ships, the PT boat could deploy a smoke screen using stern-mounted generators as they escaped and evaded the enemy ships. The enemy forces would use searchlights or seaplane-dropped flares to locate the fleeing PT boat, illuminating them for destruction by their heavy-caliber guns.

Sometimes PT boats used depth charges as a last-ditch confusion weapon to scare off pursuing destroyers. They could adjust the depth charge setting to go off at 100 feet (30 m), and by the time it exploded the pursuing destroyer would be right above the explosion. Starting in mid-1943 and thereafter, the old black powder actuated Mk13 Torpedo tubes loaded with Mark 8 torpedoes were removed and replaced with a newer style of torpedo launcher. The new Mark 1 "Roll-off" torpedo launcher rack (which was loaded with an improved Mark 13 aerial torpedo) effectively eliminated the flash of light from burning grease which would give away the position of the PT boat. The new launcher did not use any form of explosive to launch the torpedo, and weighed about 1,000 pounds (450 kg) less than the old tube style launchers.

During the war, a few PT boats were modified to become "PT Gunboats". In the PT Gunboat, the torpedoes were all removed and replaced with more and heavier guns. These versions mounted extra armor, though tests showed this was not very effective.^{[citation needed]}

The effectiveness of PT boats in the Solomon Islands campaign, where there were numerous engagements between PTs and capital ships as well as against Japanese shipborne resupply efforts dubbed "The Tokyo Express" in "the Slot", was substantially undermined by defective Mark 8 torpedoes. The Japanese were initially cautious when operating their capital ships in areas known to have PT boats, since they knew how dangerous their own Type 93s were, and assumed the Americans had equally lethal weapons. The PT boats at Guadalcanal were given credit for several sinkings and successes against the vaunted Tokyo Express. In several engagements, the mere presence of PTs was sufficient to disrupt heavily escorted Japanese resupply activities at Guadalcanal.^[15] Afterwards, the PT mission in the Solomon Islands was deemed a success.^[15]

Throughout World War II, PTs operated in the southern, western, and northern Pacific, as well as in the Mediterranean Sea and the English Channel. Some served during the Battle of Normandy. During the D-Day invasion, PTs patrolled the "Mason Line", forming a barrier against the German S-boats attacking the Allied landing forces.^[15] They also performed lifesaving and anti-shipping mine destruction missions during the invasion.

Perhaps the most effective use of PTs was as "barge busters". Since both the Japanese in the New Guinea area and the Germans in the Mediterranean had lost numerous resupply vessels to Allied air power during daylight hours, each attempted to resupply their troop concentrations by using shallow draft barges at night in very shallow waters. The shallow depth meant Allied destroyers were unable to follow them due to the risk of running aground and the barges could be protected by an umbrella of shore batteries.

The efficiency of the PT boats at sinking the Japanese supply barges was considered a key reason why the Japanese had severe food, ammunition, and replacement problems during the New Guinea and Solomon Island Campaigns, and made the PT boats prime targets for enemy aircraft. The use of PT boat torpedoes was ineffective against these sometimes heavily armed barges, since the minimum depth setting of the torpedo was about 10 feet (3 m) and the barges only drew 5 feet (1.5 m).^[16] To accomplish the task, PTs in the Mediterranean and the Pacific (and RN and RCN MTBs in the Mediterranean) installed more and heavier guns which were able to sink the barges. One captured Japanese soldier's diary described their fear of PT boats by describing them as "the monster that roars, flaps it wings, and shoots torpedoes in all directions."^[17]

Though their primary mission continued to be attack on surface ships and craft, PT boats were also used effectively to lay mines and smoke screens, coordinate in air-sea rescue operations, rescue shipwreck survivors, destroy Japanese suicide boats, destroy floating mines, and to carry out intelligence or raider operations.

After the war, American military interviews with captured veterans of the Imperial Japanese Navy, supplemented by the available partial Japanese war records, were unable to verify that all the PT boat sinking claims were valid.^{[citation needed]} Like many other victory claims by all parties involved (aircraft pilots, surface ships, submarines) this unclear verification was due in part to the Japanese military's policies of destroying military records.^{[citation needed]}

Although they did have a small refrigerator on board, PT boats lacked the larger capacity refrigerators of larger ships to store meat, milk, butter, and eggs, so crews depended on the ingenuity of their cook, who might also be quartermaster and signalman, and what he could do with sandwiches, Spam, Vienna sausage, beans, and orange marmalade. PT boat squadrons were supported by either PT boat tenders or PT boat bases which supplied the boat crews with hot meals cooked aboard the larger command's facilities. The PT boat crews were usually located at the end of the supply chain, and as a result, they became proficient at finding "alternative means" of meeting their needs. PT boat crews would often beg, borrow, or barter with nearby ships or military units for supplies. At the front lines, it was not uncommon to see crewmen fish by aiming rifles or tossing grenades into the water near the boat.

In the Solomon Islands in 1943, three 77-foot (23 m) PT boats, PT-59, PT-60, and PT-61, were converted into "PT gunboats" by stripping them of all original armament except the two twin .50 cal (12.7 mm) gun mounts, then adding two 40mm and four twin .50 cal (12.7 mm) mounts. Lieutenant John F. Kennedy was the first commanding officer of PT-59 after its conversion. On 2 November 1943, PT-59 participated in the rescue of 40 to 50 Marines from Choiseul Island and a foundering landing craft (LCP(R)) which was under fire from Japanese soldiers on the beach.^[18]

In 1944, several Higgins 78-foot (24 m) boats (PT222, PT-283, PT-284, PT-285, and PT-282) were converted, releasing PT-59, PT-60, and PT-61 for transfer back home to the Motor Torpedo Boat Squadron Training Command (MTBSTC) school in Melville, Rhode Island for use in training in hull repair techniques.

Many PT boats became famous during and after World War II:

• PT-41, commanded by Lieutenant John D. Bulkeley, carried General Douglas MacArthur in his escape from Corregidor Island, Philippines. Bulkeley was awarded the Medal of Honor for his operations in the Philippines before rescuing MacArthur. Bulkeley's story inspired the book They Were Expendable, and the movie of the same name. PT-41 was the flagship of Motor Torpedo Boat Squadron Three (MTBRON 3), based in the Philippine Islands 1941–1942 (PT-41, −31, −32, −33, −34, −35).
• Life magazine published an article about the PT boat captains in the battles off Guadalcanal, featuring the exploits of Lieutenants "Stilly" Taylor, Leonard A. Nikoloric, Lester Gamble, and Robert and John Searles; the article mentioned many boats in MTB Squadrons Two and Five (in particular, PT-36, PT-37, PT-39, PT-44, PT-46, PT-48, PT-59, PT-109, PT-115, and PT-123).
• Other PT boats gaining fame during the war were PT-363 and PT-489, the boats used by Lieutenant Commander Murray Preston to rescue a downed aviator in Wasile Bay,^[19] off Halmahera Island, for which Preston was awarded the Medal of Honor.
• PT-109, commanded by future President John F. Kennedy, was made famous through the 1961 book PT 109: John F. Kennedy in World War II by Robert J. Donovan, and the 1963 film based on it.
• PT-157: Commanded by Lieutenant, junior grade, William F. 'Bud' Liebenow, Rescued crew of PT-109, Details in book "FIRST-UP: Chronicles of the PT-157"
• PT-59: Commanded by Lieutenant, junior grade, John F. Kennedy after the loss of PT-109
• PT-105: Commanded by Lieutenant Dick Keresey at the time of the loss of PT-109. Keresey wrote a book by the same name.
• PT-373: Commanded by Lieutenant Belton A. Copp was the first boat, of a two boat squadron, to enter Manila Harbor in order to "test defenses" since the U.S. retreat in 1942. General McArthur honored LT Copp and the crew of PT-373 by using it to carry him back into Manila Harbor on 2 March 1945.

According to the book "At Close Quarters: PT Boats in the United States Navy" ^[20] 99 of the 531 PT boats that served during World War II, were lost to various causes.^[21]

• Accident, friendly fire, sea conditions – 32
• Destroyed by own crew to prevent capture – 27
• Rammed, by the enemy – 8
• Kamikaze – 2
• Naval mines – 9
• Enemy coastal artillery – 6
• Strafing by aircraft – 8
• Enemy naval gunfire – 7

At the end of the war, almost all surviving U.S. PT boats were disposed of shortly after V-J Day. Hundreds of boats were deliberately stripped of all useful equipment and then dragged up on the beach and burned. This was done to minimize the amount of upkeep the Navy would have to do, since wooden boats require much continuous maintenance, and they were not considered worth the effort. The boats also used a lot of high octane gasoline for their size, making them too expensive to operate for a peacetime navy. Much of this destruction (121 boats) occurred at PT Base 17, on Samar, Philippines, near Bobon Point.^[22]

A few (one 80' Elco, one 72' Vosper, and three 78' Higgins) were cut up and destroyed between 1998 and 2008, leaving (a known) total of 11 PT boats, and 2 experimental PT boat hulls in various states of repair, surviving today in the U.S.:

• PT-48

PT-48 is possibly the last surviving 77-foot (23 m) Elco PT boat. In July 1942, PT-48 (nicknamed "Prep Tom" and "Deuce") was assigned to MTB RON 3. This second Squadron 3 was the first to arrive in the Solomons and saw heavy engagement with the "Tokyo Express". PT 48 was one of the first 4 boats to arrive at Tulagi, on 12 October 1942. On the night of 13/14 October 1942, PT-48 engaged a Japanese destroyer at 200 yards (180 m). This Squadron saw action in the Solomon Islands, Guadalcanal, and Funafuti. PT-48 is today in need of major restoration, after having been cut down to 59 feet (18 m) and used as a dinner cruise boat. Because of this boat's extensive combat history, having survived 22 months in the combat zone at Guadalcanal (more time in combat than any other surviving PT boat), a preservation group, "Fleet Obsolete" of Kingston, New York, acquired and transported it to Rondout Creek in 2008 for eventual repair.^{[citation needed]}

• PT-305

PT-305 ("Half Hitch","Barfly", "USS Sudden Jerk") is a Higgins 78-foot (24 m) boat, assigned during the war to RON22, and saw action against the Germans in the Mediterranean Sea. Squadron 22 was operating with the British Coastal Forces, and saw action along the northwest coast of Italy and southern coast of France. In June 1945 the squadron was shipped to the U.S. for refitting and transfer to the Pacific, but the war ended while still in New York. The PT-305 was cut down to 65 feet (20 m) for use as an oyster seed boat in Crisfield, Maryland. PT-305 was acquired by the Defenders of America Naval Museum (DOANM), and then sold in May 2007 to the National World War II Museum in New Orleans. PT-305 is undergoing restoration (as of 2012) to become a permanent display in the new expansion of the museum.^[23][24]

• PT-309

A 78-foot (24 m) Higgins, PT-309 ("Oh Frankie!") was assigned during the war to RON22, and saw action against the Germans in the Mediterranean Sea. The squadron was operating under the British Coastal Forces, and saw action along the northwest cost of Italy and southern coast of France. In April 1945 the squadron was shipped to the U.S. for refitting and transfer to the Pacific, but the war ended while still in New York. Coincidentally, the PT-309 ("Oh Frankie!"), was named in honor of Frank Sinatra, with whom the boats' Commanding Officer met at a nightclub shortly before MTBRON22 left New York for the Mediterranean Theatre. PT-309 is located at the National Museum of the Pacific War / Admiral Nimitz Museum^[25] in Fredericksburg, Texas, which was restored by the (now defunct) Defenders of America Naval Museum (DOANM). PT-309 is restored (but non-operational) in a static diorama display without engines installed. Her external restoration was completed by the Texas group in 2002, and is to a high standard.

• PT-459

PT-459 ("MAHOGANY MENACE") a Higgins 78-foot (24 m) boat, was assigned to MTBRON 30 on 15 February 1944 under the command of LCDR Robert L. Searles. MTBRON 30 saw action in the English Channel as part of the Invasion of Normandy. In late June 1945 the squadron was shipped to the U.S. for refitting and transfer to the Pacific, but the war ended while still in New York. After the war, the ex-PT459 was cut down to 65 feet (20 m) and highly modified into a sightseeing boat and fishing trawler. She was acquired by Fleet Obsolete in June 2008 and moved to Kingston, New York for possible restoration.

• PT-486

PT-486, an 80-foot (24 m) Elco boat, was place in service on 2 December 1943.^[26] It was used in the training squadron (MTBRON)4 in Melville, Rhode Island during World War II until it was placed out of service 16 January 1946. Along with PT-557, the vessel was purchased from BFM Industries (Brooklyn, NY) by Capt. George C. Sinn of Wildwood Crest, NJ on 9 October 1951 for $1,015.00. The vessel was sold in 1952 to Otto Stocker who operated the "Sightseer" as an excursion vessel from Otten's Harbor in Wildwood, New Jersey. The business was later sold to Capt. Charles Schumann in the 1980s. He named the vessel Schumann's "Big Blue" and ran the business until 2002. Remarkably, the PT486 was sold to the son of the original owner, Capt. Ronald G. Sinn, who in 2012 sold the boat to "Fleet Obsolete" of Kingston NY. Plans are for restoring the vessel to recreate the World War II appearance.

• PT-615

PT-615, an 80-foot (24 m) Elco originally assigned to RON 42, was commissioned after the war ended. PT-615 was returned to Elco after being sold and was heavily modified into a yacht, which was leased to actor Clark Gable. He named the boat Tarbaby VI, and used her through the 1950s. The boat was serviced and stored by Elco. She was sold several times, and moved to Kingston for possible restoration.

• PT-617

PT-617 is an 80-foot (24 m) Elco boat located in Battleship Cove Naval Museum in Massachusetts. She was obtained from the backwaters of Florida and moved to its current location by JM "Boats" Newberry, the founder of PT Boats Inc. "Boats" along with the team at Battleship Cove Museum restored her during 1984–89, inside and out, at a cost of US$1 million. The boat is owned by PT Boats, Inc., a World War II PT veterans organization headquartered in Germantown, Tennessee. The quality of the restoration was extremely high, and the boat is on display inside a weatherproof building, on blocks out of the water. She is available for public viewing, and has portions of her hull cut away to display the cramped interior of the crew's quarters. General visitors are not allowed inside the boat in order to help preserve her historic integrity.

• PT-657

PT-657, a Higgins 78-foot (24 m) boat, has been converted into a charter fishing boat. She is located in San Diego and is now named Malahini.

• PT-658

Perhaps the best example of a surviving Higgins 78-foot (24 m) boat is PT-658, which was relaunched after hull restoration from 1995 to 2005. The boat has a website ^[27] with up to date photos and news about the boat. PT-658 is now fully functional and afloat, using the three original Packard V12 5M-2500 gas engines. Restoration and fine tuning of the boats condition and details continues up to present day. It is the only 100% authentically restored U.S. Navy PT boat actually operational today. PT-658 is located in Portland, Oregon, at Vigor Shipyard Pier 308 in Portland's Swan Island Lagoon. The all volunteer group is working to maintain the boat as a living, breathing artifact dedicated to the history of the PT force of the Second World War.^[28] Both the interior and exterior of the PT-658 have been restored to the appearance from the day the boat was accepted by the US Navy on July 31, 1945. This includes all weapons, electronics, equipment and accessories that was included as part of the delivery contract. PT-658 was added to the National Register of Historic Places in 2012.^[29]

• PT-728

PT-728, a surviving Vosper boat built under license at the Annapolis Boat Yard in Maryland, was restored in Key West, Florida. Her deck house was reconfigured to partially resemble an 80-foot (24 m) Elco instead of its original Vosper 70-foot (21 m) configuration. PT-728 was acquired by Fleet Obsolete and moved to Kingston. There PT-728 allows up to 49 tourists the chance to ride on a "PT boat". This boat is the only U.S. Coast Guard regulation-approved PT boat licensed to take passengers for hire, and the only surviving U.S.-built Vosper design. In spring of 2012, PT-728 was acquired by the Liberty Aircraft Museum of Port Clinton, OH for further restoration.

• PT-796

PT-796 ("Tail Ender") is a 78-foot (24 m) Higgins.^[30] After the war ended PT-796 was used in the Key West/Miami area for experimental purposes. She was retired from service in the late 1950s. Shortly after her retirement from service, the PT-796 was used as a float during President John F. Kennedy's inaugural parade to represent PT-109, with the PT-109 hull number painted on the bow, and several of PT-109's surviving crew members manning the boat. Today, PT-796 is located at the Battleship Cove Naval Museum in Fall River, Massachusetts in a Quonset hut-style building, protected from the weather, and up on blocks. The boat is owned by PT Boats, Inc., a World War II PT veterans organization headquartered in Germantown, Tennessee.

• PT-3

Two of the experimental PT-Boats also still survive, PT-3 (built by Fisher Boat Works) in Pennsylvania and PT-8. PT-3 was a 59-foot (18 m) barrel-back boat that was rejected by the Navy during trials in 1941 after being deemed too short to carry 4 torpedoes.^[31] PT-3 and PT-8 were both part of Squadron 1 (RON 1) during the testing period. After testing was completed in 1941, PT-3 was reclassified into a Small Boat and transferred to Harbor Patrol duties for the duration of the war.^[32] Now located in a New Jersey boatyard in very poor condition.^[33]

• PT-8

PT-8 (built at Philadelphia Naval Shipyard) in Louisiana was built entirely from aluminum but did not pass the speed acceptance criteria for use as a PT boat for the U.S. Navy due to its weight. She was reclassified as a harbor patrol boat for the duration of the war.

• UK Vosper

The two Vosper boats in England were built by Vosper itself, and the first is in fairly good condition at Portsmouth. The second UK built boat is in private hands, floating on a canal north of London and being used as a private residence, though it is remarkably intact in its World War II configuration.

Ten Higgins boats were delivered in 1948 for use by the Argentine Navy ("Armada Argentina") during the late 1940s up until the late 1970s.^[34] All of these boats are now retired from naval use, with two still in service today as sightseeing boats on Mar del Plata: the Leonardo da Vinci No. 8 and the Mar de la Plata #9.^[35] The other six boats are in various states of disrepair or sunk or scrapped.

The PT boat design was also exported after the end of the second world war as an unarmed air-sea rescue launch for use by the South African Navy.

The 1963 movie PT-109 used what appears to be five Elco 80-foot (24 m) boats. The engine telegraph shows the Elco name, and the boats resemble Elcos. The boats were converted from Air Force Crash Rescue Boats, due to the unavailability of operational survivors. The 85-foot (26 m) boats were built with only two Packard engines.

The original 1962–66 McHale's Navy TV series used a Vosper boat.

In the 1997 movie McHale's Navy, 63-foot (19 m) Air Sea Rescue boats were used.

Occasionally Vietnam-era PTF boats (Patrol Torpedo Fast) (built at John Trumpy, Annapolis or Nasty class from Norway)^[36] are incorrectly identified as World War II PT boats. Several PTF boats can still be found around the country, including PTF-3 in Florida, PTF-19 in Chesapeake Bay and PTF-26 in California. These should not to be confused with PT boats, as they differ in many key features.

• • Note: Fleet Obsolete Historic PT Boats, who recovers and rebuilds PT boats says this about McHales Navy and PT 109:

Originally powered with 3 Packard/Merlins (Packard was a contractor building the Rolls-Royce Merlin engine), PT-728 was repowered with a pair Detroit Diesel 8V-71TI's for the making of the TV show McHales Navy (PT73). This boat was portrayed as PT 109 in the movie, and several other PT boat roles in movies and TV.

General printed references

• Breuer, William (1987). Devil Boats: The PT War Against Japan. Novato, California, U.S.A.: Presidio Press. ISBN 0-89141-586-6.
• Robert J. Bulkley, At Close Quarters: PT Boats in the United States Navy (Washington: U.S. Government Printing Office, 1962)
• Victor Chun, American PT Boats in World War II: A Pictorial History (Schiffer Publishing, 1997)
• T. Garth Connelly, Don Greer, Tom Tullis, Joe Sewell, Pt Boats in Action (Warships, No 7) (Squadron/Signal Publications, Inc., 1994)
• David Doyle "Elco 80' PT Boat On Deck" (Squadron/Signal Publications, Inc., 2010)
• Michael Green, PT Boats (Land and Sea) (Capstone Press, 1999)
• Keresey, Dick (2003). pt 105. Annapolis, Maryland, U.S.A.: United States Naval Institute. ISBN 978-1-55750-469-2.
• Angus Konstam, PT-Boat Squadrons – US Navy Torpedo Boats (Ian Allan Publishing, June 2005)
• An excellent compendium of information about the Elco PT Boats can be found in "Allied Coastal Forces of World War II" Volume II by John Lambert and Al Ross. ISBN 1-55750-035-5. This book has a detailed history of the development of the various Elco boats, with numerous drawings and photos. It also has sections on PT Boat construction, as well as chapters on the Packard engines and typical weaponry used aboard PT Boats.
• Board of Inspection and Survey, Report of Comparative Services Tests of Motor Torpedo Boats Held July 21–24, 1941 and August 11–12, 1941 at New London, Connecticut (Navy Department, August 14, 1941)
• Lindsay Lord, Naval Architecture of Planing Hulls (Cornell Maritime Press, 1946)

PT-109 story printed references

• Robert J. Donovan, PT 109: John F. Kennedy in WWII, 40th Anniversary Edition, McGraw Hill (reprint), 2001, ISBN 0-07-137643-7
• Richard Tregaskis, John F. Kennedy and PT-109 (Random House, 1962) OCLC 826062
• Robert D. Ballard, Collision With History: The Search for John F. Kennedy's PT 109 (National Geographic, 2002)
• Haruyoshi Kimmatsu, "The night We sank John Kennedy's PT 109" appeared in Argosy Magazine December 1970, Vol. 371 No. 6
• Tameichi Hara, Japanese Destroyer Captain (Ballantine Books, 1978) ISBN 0-345-27894-1
• Duane T. Hove, American Warriors: Five Presidents in the Pacific Theater of World War II, Burd Street Press, (2003) ISBN 1-57249-307-0
• James Michener, Tales of the South Pacific, Fawcett Crest Books, (1947) ISBN 0-449-23852-0
• Official Report on Loss of PT 109

• original Elco movie Giant Killers
• www.pt728.com Home of PT 728, a fully restored 72-foot (22 m) Vospor
• An example of daily life aboard a PT boat, recorded in the deck logs
• PT Boat Museum website
• Save the PT Boat USS PT-658 website
• Project video
• PT-617 Photos of the Elco PT boat PT-617 in Fall River, MA
• PT-796 Photos of the Higgins PT Boat PT-796 in Fall River, MA
• PT-235 Photos of life on board a PT boat in the Pacific in World War II by PT Boat Veteran Milt Donadt of PT-235
• Electric Launch Corp records
• Website dedicated to PT Boats
• PC game about PT Boats
• HNSA Ship Page: PT Boats to visit as museums and memorials
• With The Mosquito Fleet, April 1941 one of the earliest large article on PT Boats in the US
• Elco 103 class PT boat resource site
• PT-728 Touring the East Coast
• Fleet Obsolete Historic PT Boats
• Higgins Industries Motor Torpedo Boat Diagram Collection in the Louisiana Digital Library
• Higgins Industries Collection, University of New Orleans Earl K. Long Library Department of Louisiana and Special Collections