Abstract
This paper presents a novel optimization approach that is a new hybrid optimization approach based on the particle swarm optimization algorithm and receptor editing property of immune system. The aim of the present research is to develop a new optimization approach and then to apply it in the solution of optimization problems in both the design and manufacturing areas. A single-objective test problem, tension spring problem, pressure vessel design optimization problem taken from the literature and two case studies for multi-pass turning operations are solved by the proposed new hybrid approach to evaluate performance of the approach. The results obtained by the proposed approach for the case studies are compared with a hybrid genetic algorithm, scatter search algorithm, genetic algorithm, and integration of simulated annealing and Hooke-Jeeves pattern search.
Similar content being viewed by others
References
Gilbert WW (1950) Economics of machining theory and practice. American Society Metals, Cleveland, OH
Okushima K, Hitomi K (1964) A study of economic machining: an analysis of maximum profit cutting speed. Int J Prod Res 3:73–78
Ermer DS (1971) Optimization of the constrained machining economics problem by geometric programming. Trans ASME J Eng Ind 93:1067–1072
Boothroyd G, Rusek P (1976) Maximum rate of profit criteria in machining. Trans ASME J Eng Ind 98:217–220
Chen MC, Tsai DM (1996) A simulated annealing approach for optimization of multi-pass turning operations. Int J Prod Res 34:2803–2825
Iwata K, Murotsu Y, Iwatsubo T, Oba F (1977) Optimization of cutting conditions for multi-pass operations considering probabilistic nature in machining conditions. J Eng Ind Trans ASME 99:211–217
Lambert BK, Walvekar AG (1978) Optimization of multi-pass machining operations. Int J Prod Res 16:259–265
Shin YC, Joo YS (1992) Optimization of machining conditions with practical constraints. Int J Prod Res 30:2907–2919
Ermer DS, Kromodihardo S (1981) Optimization of multipass turning with constraints. J Eng Ind Trans ASME 103:462–468
Gopalkrishan B, Khayyal FA (1991) Machining parameter selection for turning with constraints: an analytical approach based on geometric programming. Int J Prod Res 29:1897–1908
Gupta R, Batra JL, Lal GK (1995) Determination of optimal subdivision of depth of cut in multi-pass turning with constraints. Int J Prod Res 33:2555–2565
Hati SK, Rao SS (1976) Determination of optimum machining conditions deterministic probabilistic approaches. Trans ASME J Eng Ind 98:354–359
Tan FP, Creese RC (1995) A generalized multi-pass machining model for machining parameter selection in turning. Int J Prod Res 33:1467–1487
Wang ZG, Rahman M, Wong YS, Sun J (2005) Optimization of multi-pass milling using parallel genetic algorithm and parallel genetic simulated annealing. Int J Mach Tools Manuf 45:1726–1734
Holland HJ (1975) Adaptation in natural and artificial systems an introductory analysis with application to biology control and artificial intelligence. The University of Michigan Press, Ann Arbor, USA
Lyu N, Saitou K (2005) Topology optimization of multi-component structures via decomposition-based assembly synthesis. Transactions of ASME. J Mec Design 127:170–183
Singh D, Rao PV (2007) Optimization of tool geometry and cutting parameters for hard turning. Mater Manuf Process 22:15–21
Yildiz AR, Ozturk F (2006) Hybrid enhanced genetic algorithm to select optimal machining parameters in turning operation. Proc Inst Mech Eng, B J Eng Manuf 220:2041–2053
Tandon V, El-Mounayri H, Kishawy H (2002) NC end milling optimization using evolutionary computation. Int J Mach Tools Manuf 42:595–605
Fourie PC, Groenwold AA (2002) The particle swarm optimization algorithm in size shape optimization. Struct Multidiscipl Optim 23:259–267
Yıldız AR, Özturk N, Kaya N, Özturk F (2007) Hybrid multi-objective shape design optimization using Taguchi’s method and genetic algorithm. Struct Multidiscipl Optim 34:277–365
Yildiz AR, Saitou K (2008) Topology synthesis of multi-component structural assemblies in continuum domains. In: Proc. ASME International Design Engineering Technical Conferences IDETC/CIE 2008 New York, USA, August 3–6, 2008
Onwubolu GC, Clerc M (2004) Optimal path for automated drilling operations by a new heuristic approach using particle swarm optimization. Int J Prod Res 42:473–491
Yildiz AR (2008) A novel hybrid immune algorithm for global optimization in design and manufacturing. Robot Compute Integr Manuf DOI 10.1016/j.rcim.2007.08.002 (in press)
Camp CV, Bichon BJ, Stovall SP (2005) Design of steel frames using ant colony optimization. ASCE-J Struct Eng 131:367–525
Karpat Y, Özel T (2006) Swarm-intelligent neural network system (SINNS) based multi-objective optimization of hard-turning. Trans NAMRI/SME 34:1–8
Onwubolu GC, Kumalo T (2001) Optimization of multi-pass turning operation with genetic algorithm. Int J Prod Res 39:3727–3745
Vijayakumar K, Prabhaharan G, Asokan P, Saravanan R (2003) Optimization of multi-pass turning operation using ant colony system. Int J Mach Tools Manuf 43:1633–1639
Chen MC, Chen KY (2003) Optimization of multipass turning operations with genetic algorithms: a note. Int J Prod Res 41:3385–3388
Chen MC (2004) Optimizing machining economics models of turning operations using the scatter search approach. Int J Prod Res 42:2611–2625
Haq AN, Sivakumar K, Saravanan R, Karthikeyan K (2006) Particle swarm optimization algorithm for optimal machining allocation of clutch assembly. Int J Adv Manuf Technol 27:865–869
El-Mounayri H, Dugla Z, Deng H (2003) Prediction of surface roughness in end milling using swarm intelligence. In: Proc IEEE Swarm Intelligence Symposium 2003
Venter G, Sobieszczanski-Sobieski J (2004) Multidisciplinary optimization of a transport aircraft wing using particle swarm optimization. Struct Multidiscipl Optim 26:121–131
Asokan P, Baskar N, Babu K, Prabhaharan G, Saravanan R (2005) Optimization of surface grinding operations using particle swarm optimization technique. J Manuf Sci Eng - Trans ASME 127:885–892
Bochenek B, Forys P (2006) Structural optimization for post-buckling behavior using particle swarms. Struct Multidiscipl Optim 32:521–531
Andres C, Lozano S (2006) A particle swarm optimization algorithm for part-machine grouping. Robot Compute Integr Manuf 22:468–474
Adly AA, Abd-El-Hafiz SK (2006) Using the particle swarm evolutionary approach in shape optimization field analysis of devices involving nonlinear magnetic media. IEEE Trans Magn 42:3150–3152
Goudos SK, Sahalos JN (2006) Microwave absorber optimal design using multi-objective particle swarm optimization. Microw Optic Technol Lett 48:1553–1558
Natarajan U, Saravanan R, Periasamy VM (2006) Application of particle swarm optimisation in artificial neural network for the prediction of tool life. Int J Adv Manuf Technol 28:1084–1088
Vahed ARR, Mirghorbani SM (2007) A multi-objective particle swarm for a flow shop scheduling problem. J Comb Optim 13:79–102
Fan SSK, Liang YC, Zahara E (2004) Hybrid simplex search particle swarm optimization for the global optimization of multimodal functions. Eng Optim 36:401–418
Xia WJ, Wu ZM (2006) A hybrid particle swarm optimization approach for the job-shop scheduling problem. Int J Adv Manuf Technol 29:360–366
Yoo J, Hajela P (1999) Immune network simulations in multicriterion design. Struct Multidisciplin Optimi 1:8:85–94
Coello CAC, Cortes NC (2004) Hybridizing a genetic algorithm with an artificial immune system for global optimization. Eng Optim 36:607–634
Kaya N (2006) Optimal design of an automotive diaphragm spring with high fatigue resistance. Int J Veh Des 40:126–143
Eberhart R, Kennedy J (1995) A new optimizer using particle swarm theory. In: Proc IEEE Sixth International Symposium on Micro Machine Human Science. Nagoya, Japan, pp 39-43
De Castro LN, Von Zuben FJ (1999) Artificial immune systems. Part 1, Basic theory applications. Tech Rep TR-DCA 01/99
George AJT, Gray D (1999) Receptor editing during affinity maturation. Immunol Today 20:196
De Castro LN, Von Zuben FJ (2000) The clonal selection algorithm with engineering applications. In: Proc Workshop on GECCO 2000 Las Vegas July 8–12 2000
De Castro LN, Von Zuben FJ (2002) Learning and optimization using the clonal selection principle. IEEE Trans Evol Comput 6:239–251
Hamida SB, Schoenauer M (2002) ASCHEA:New results using adaptive segregational constraint handling. In: Proc Congr Evolutionary Computation 1:884–889
Koziel S, Michalewicz Z (1999) Evolutionary algorithms homomorphous mappings and constrained parameter optimization. Evol Comput 71:19–44
Hadj-Alouane AB, Bean JC (1997) A genetic algorithm for the multiple-choice integer program. Oper Res 45:92–101
Michalewicz Z, Attia N (1994) Evolutionary optimization of constrained problems. Proc 3rd Annual Conference on Evolutionary Programming World Scientific 1994, pp 98–108
Belegundu AD (1992) A study of mathematical programming methods for structural optimization. Department of Civil and Environmental Engineering University of Iowa, Iowa City, Iowa
Arora JS (1989) Introduction to optimum design. McGraw-Hill, New York
Coello CAC (2004) Use of a self-adaptive penalty approach for engineering optimization problems. Comput Ind 41:113–127
Coello CAC, Montes EM (2002) Constraint-handling in genetic algorithms through the use of dominance-based tournament selection. Adv Eng Informatics 16:193–203
Kannan BK, Kramer SN (1994) An augmented Lagrange multiplier based method for mixed integer discrete continuous optimization and its applications to mechanical design. ASME J Mech Des 116:318–320
Sandgren E (1998) Nonlinear integer discrete programming in mechanical design. In: Proc ASME Design Technology Conference, Kissimmee, FL, USA
Deb K (1997) GeneAS: a robust optimal design technique for mechanical component design. In: Proc Evolutionary Algorithms in Engineering Applications. Springer, Berlin Heidelberg New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yıldız, A.R. A novel particle swarm optimization approach for product design and manufacturing. Int J Adv Manuf Technol 40, 617–628 (2009). https://doi.org/10.1007/s00170-008-1453-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-008-1453-1