File:ER core assembly exploded.png

DescriptionER core assembly exploded.png	exploded view of a ER core-based inductor
Date	24 June 2006
Source	Own work
Author	Cyril BUTTAY
Permission (Reusing this file)	as licensed
Other versions	This technology image could be re-created using vector graphics as an SVG file. This has several advantages; see Commons:Media for cleanup for more information. If an SVG form of this image is available, please upload it and afterwards replace this template with {{vector version available|new image name}}. It is recommended to name the SVG file “ER core assembly exploded.svg”—then the template Vector version available (or Vva) does not need the new image name parameter.

I, the copyright holder of this work, hereby publish it under the following licenses:

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue

	This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.
	You are free: to share – to copy, distribute and transmit the work to remix – to adapt the work Under the following conditions: attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
	This licensing tag was added to this file as part of the GFDL licensing update.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue

This file is licensed under the Creative Commons Attribution-Share Alike 2.5 Generic, 2.0 Generic and 1.0 Generic license.

You are free:

• to share – to copy, distribute and transmit the work
• to remix – to adapt the work

Under the following conditions:

• attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
• share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.

https://creativecommons.org/licenses/by-sa/2.5CC BY-SA 2.5 Creative Commons Attribution-Share Alike 2.5 truetrue

You may select the license of your choice.

made using povray 3.5 and the following source:

#declare RAD = on;   // use radiosity?
#declare Exploded=on; // exploded view or not?
#declare CoilLength = 2.6;

#include "functions.inc"
#include "metals.inc"
#include "colors.inc"
global_settings {
  #if(RAD)
    radiosity {
      brightness 0.60 
      count 100
      error_bound 0.2
      gray_threshold 0.0
      low_error_factor 0.2
      minimum_reuse 0.015
      nearest_count 10
      recursion_limit 1
      #if (version>3.1)
        adc_bailout 0.01
        max_sample -1.0
        media off
        normal off
        always_sample 1
        pretrace_start 0.08
        pretrace_end 0.01
      #end
    }
  #end
}

background { color White }

// declarations for the magnetic core------------------------------------------------
#declare corner = lathe { // a quarter of cyclindic volume used to "round" the corners
    linear_spline
    6
    <0,0>,<0.05,0>, <0.1,0.05>, <0.1,0.95>,<0.05,1>, <0,1>
    rotate 90*x 
}
#declare side =  prism { // the extrusions of the volume
  linear_sweep
  linear_spline
  0, 1, 9,
  <0.05,0>, <0,0.05>, <0,0.95>, <0.05,1>, <0.45,1>, <0.5,0.95>, <0.5,0.05>, <0.45,0>, <0.05,0>
}
#declare bottom = prism { // The bottom of the core
  linear_sweep
  linear_spline
  0, 1, 9,
  <0.25,0>, <0,0.05>, <0,0.95>, <0.25,1>, <0.35,1>, <0.4,0.95>, <0.4,0.05>, <0.35,0>, <0.25,0>
}
#declare middle =  cylinder { // the extrusion of the middle leg
  <0,0,0>,<0,1,0>,0.5
}
#declare core = union {
  difference{
    union{
      object {side scale <1,1.7,1> translate -1.7*x  }
      object {side scale <1,1.7,1> translate 1.2*x  }
    }
    cylinder{<0,-10,0.5>,<0,10,0.5>,1.3 translate 0.3*y}
  }
  object {bottom scale <1,3.2,1> rotate -90*z translate <-1.6,0.3,0> }
  object {corner translate -1.6*x}
  object {corner translate 1.6*x} 
  object {middle scale <1,1.7,1> translate <0,0,0.5>  }
  pigment { Gray50}
}

//declaration of the coil element-------------------------------------------------------- 
#declare coil = isosurface {
  function {f_helix1(x,y,z, 1, 60, 0.05, 1, 1, 1, 0)}
  contained_by { box { -CoilLength/2, CoilLength/2 }}
  pigment { P_Copper4 }
  finish {F_MetalB}//C
}

//declarations for the bobbin-------------------------------------------------------------
declare pin = union {
  box{<0,-0.3,-1>,<0.3,0,0> pigment {Gray20 } 
    translate<-0.15,0,0>
  }
  cylinder{<0,-0.15,-1.5>,<0,-0.15,0>,0.05 
    pigment{ P_Copper4 }
    finish {F_MetalB}
  }
}
#declare bobin_extremity = difference{
  union {
    cylinder{<0,0,0>,<0,0.1,0>,1.15}
    box {<-1.8,-0.3,-0.6>,<1.8,0.1,0.6>}
    prism {
      linear_sweep
      linear_spline
      0, 0.2, 4,
      <1.8,0>,<1.92,0.15>,<-1.92,0.15>,<-1.8,0>
      rotate -90*x
      translate <0,-0.15,0.1>
    } 
    #declare Index = 0.3;
    #while(Index <= 1.7)
      object{pin translate <-Index,0,0>}
      object{pin translate <Index,0,0>}
      #declare Index = Index + 0.6;
    #end
  }
  merge {
    box {<-1.1501,-1,-0.55>,<1.1501,0,0.55>}
    box {<-1.75,-1,-0.55>,<-1.15,1,0.55>}
    box {<1.75,-1,-0.55>,<1.15,1,0.55>}
  }
}
#declare bobbin = difference {
  union {
    cylinder{<0,-0.1,0>,<0,CoilLength+0.1,0>,0.6}
    object{bobin_extremity translate <0,-0.1,0>}
    object{bobin_extremity rotate 180*z translate <0,CoilLength+0.1,0>}
  }
  cylinder{<0,-10,0>,<0,10,0>,0.55 pigment { Gray20 } }
  pigment { Gray20 } 
}

//declarations for the clip
#declare halfclip = difference { 
  prism {
    linear_sweep
    bezier_spline
    0, 1, 32, 
    <0,0>,<1.2,0>,<0,0>,<1.2,0>,
    <1.2,0>,<1.3,0>,<1.6,-0.2>,<1.7,-0.2>,
    <1.7,-0.2>,<1.8,-0.2>,<1.8,-0.2>,<1.8,0.5>,
    <1.8,0.5>,<1.9,0.5>,<1.8,0.5>,<1.9,0.5>,
    <1.9,0.5>,<1.9,-0.3>,<1.9,-0.3>,<1.7,-0.3>,
    <1.7,-0.3>,<1.6,-0.3>,<1.3,-0.1>,<1.2,-0.1>,
    <1.2,-0.1>,<0,-0.1>,<1.2,-0.1>,<0,-0.1>,
    <0,-0.1>,<0,0>,<0,-0.1>,<0,0>
    pigment {P_Chrome1}
    finish {F_MetalC}
  }
  box {<0,0.2,0.25>,<10,0.8,0.4>
    pigment {P_Chrome1}
    finish {F_MetalC}
  }
}
#declare completeclip = union {
  object{halfclip scale 0.5*y}
  object{halfclip scale 0.5*y rotate 180*z translate 0.5*y} 
}

// the final union-------------------------------------------------
union {
  object {bobbin rotate -90*x translate <0,0.5,-0.4>}
  object {coil rotate -90*x translate <0,0.5,-CoilLength/2-0.4>}
  object {core rotate -90*x translate <0,0,0>}
  #if(Exploded)  
    object {core rotate 90*x translate <0,1,-6.5>} 
    object {completeclip translate <0,0.25,-8>}
  #else
    object {core rotate 90*x translate <0,1,-3.4>} 
    object {completeclip translate <0,0.25,-3.5>}
  #end
  object {completeclip rotate 180*y  translate <0,0.25,0.1>}
  rotate <0, 30, 0>
  finish {
    #if(RAD)  
      ambient 0
      diffuse 0.7 
    #else
      ambient 0.8 
      diffuse 0.5      
    #end   
    phong 1
    phong_size 60
  } 
}
light_source { <0, 14, -10> color White}
light_source { <2, 4, -10> color White}
#if(Exploded)  
  camera {location <1,10,-15> look_at <-3.3,-3.5> angle 33}
#else
  camera {location <1,10,-15> look_at <-1.25,-1,0> angle 20}
#end
<pre>

And then compiled using the following command:
<pre>
povray -IER_core_assembly_exploded.pov +a -Q11 -W1280 -H960