-
Radiated energy fraction of SPI-induced disruptions at ASDEX Upgrade
Authors:
Paul Heinrich,
Gergely Papp,
Stefan Jachmich,
Javier Artola,
Matthias Bernert,
Pascal de Marné,
Mathias Dibon,
Ralph Dux,
Thomas Eberl,
Jörg Hobirk,
Michael Lehnen,
Tobias Peherstorfer,
Nina Schwarz,
Umar Sheikh,
Bernhard Sieglin,
Jakub Svoboda,
the ASDEX Upgrade Team,
the EUROfusion Tokamak Exploitation Team
Abstract:
Future large tokamaks will operate at high plasma currents and high stored plasma energies. To ensure machine protection in case of a sudden loss of plasma confinement (major disruption), a large fraction of the magnetic and thermal energy must be radiated to reduce thermal loads. The disruption mitigation system for ITER is based on massive material injection in the form of shattered pellet injec…
▽ More
Future large tokamaks will operate at high plasma currents and high stored plasma energies. To ensure machine protection in case of a sudden loss of plasma confinement (major disruption), a large fraction of the magnetic and thermal energy must be radiated to reduce thermal loads. The disruption mitigation system for ITER is based on massive material injection in the form of shattered pellet injection (SPI). To support ITER, a versatile SPI system was installed at the tokamak ASDEX Upgrade (AUG). The AUG SPI features three independent pellet generation cells and guide tubes, and each was equipped with different shatter heads for the 2022 experimental campaign. We dedicated over 200 plasma discharges to the study of SPI plasma termination, and in this manuscript report on the results of bolometry (total radiation) analysis. The amount of neon inside the pellets is the dominant factor determining the radiated energy fraction (frad). Large and fast fragments, produced by the $12.5^\circ$ rectangular shatter head, lead to somewhat higher values of frad compared to the $25^\circ$ circular or rectangular heads. This effect is strongest for neon content of $< 4\times10^{20}$ neon atoms injected, where a higher normal velocity component (larger fragments) seems slightly beneficial. While full-sized, 8 mm diameter, pure deuterium (D2) pellets lead to a disruption, the 4 mm or shortened 8 mm pellets of pure D2 did not lead to a disruption. The disruption threshold for pure D2 is found to be around $1\times10^{22}$ deuterium molecules inside the pellet. While the radiated energy fraction of non-disruptive SPI is below 20%, this is increased to 40% during the TQ and VDE phase of the disruptive injections. For deuterium-neon-mix pellets, frad values of $< 90$% are observed, and the curve saturates around 80% for 10% neon mixed into the 8 mm pellets ($2\times10^{21}$ neon atoms).
△ Less
Submitted 1 October, 2024;
originally announced October 2024.
-
First demonstration of Super-X divertor exhaust control for transient heat load management in compact fusion reactors
Authors:
B. Kool,
K. Verhaegh,
G. L. Derks,
T. A. Wijkamp,
N. Lonigro,
R. Doyle,
G. McArdle,
C. Vincent,
J. Lovell,
F. Federici,
S. S. Henderson,
R. T. Osawa,
D. Brida,
H. Reimerdes,
M. van Berkel,
The EUROfusion tokamak exploitation team,
the MAST-U team
Abstract:
Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this…
▽ More
Nuclear fusion could offer clean, abundant energy. However, managing the immense power exhausted from the core fusion plasma towards the divertor remains a major challenge. This is compounded in emerging compact reactor designs which promise more cost-effective pathways towards commercial fusion energy. Alternative divertor configurations (ADCs) are a potential solution to this challenge. In this work, we demonstrate exhaust control in ADCs for the first time, on MAST-U. We employ a novel diagnostic strategy for the neutral gas buffer which shields the target. Our work shows that ADCs tackle key risks and uncertainties in realising fusion energy: 1) an enlarged operating window which 2) improves exhaust control through the absorption of transients which can remove the neutral shield and damage the divertor, 3) isolation of each divertor from other reactor regions, enabling combined control. This showcases real-world benefits of alternative divertors for effective heat load management and control in reactors.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
3D MHD modelling of plasmoid drift following massive material injection in a tokamak
Authors:
M. Kong,
E. Nardon,
D. Bonfiglio,
M. Hoelzl,
D. Hu,
the JOREK team,
JET contributors,
the EUROfusion Tokamak Exploitation Team
Abstract:
Mechanisms of plasmoid drift following massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited at the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theories. The simulations confirm the important role of the propagation of shear Alfvén wave (SAW) packets from both en…
▽ More
Mechanisms of plasmoid drift following massive material injection are studied via 3D non-linear MHD modelling with the JOREK code, using a transient neutral source deposited at the low field side midplane of a JET H-mode plasma to clarify basic processes and compare with existing theories. The simulations confirm the important role of the propagation of shear Alfvén wave (SAW) packets from both ends of the plasmoid (``SAW braking'') and the development of external resistive currents along magnetic field lines (``Pégourié braking'') in limiting charge separation and thus the $\mathbf{E}\times \mathbf{B}$ plasmoid drift, where $\mathbf{E}$ and $\mathbf{B}$ are the electric and magnetic fields, respectively. The drift velocity is found to be limited by the SAW braking on the few microseconds timescale for cases with relatively small source amplitude while the Pégourié braking acting on a longer timescale is shown to set in earlier with larger toroidal extent of the source, both in good agreement with existing theories. The simulations also identify the key role of the size of the $\mathbf{E}\times \mathbf{B}$ flow region on plasmoid drift and show that the saturated velocity caused by dominant SAW braking agrees well with theory when considering an effective pressure within the $\mathbf{E}\times \mathbf{B}$ flow region. The existence of SAWs in the simulations is demonstrated and the 3D picture of plasmoid drift is discussed.
△ Less
Submitted 30 July, 2024; v1 submitted 1 July, 2024;
originally announced July 2024.
-
Measurement of zero-frequency fluctuations generated by coupling between Alfvén modes in the JET tokamak
Authors:
Juan Ruiz Ruiz,
Jeronimo Garcia,
Michael Barnes,
Mykola Dreval,
Carine Giroud,
Valerian H. Hall-Chen,
Michael R. Hardman,
Jon C. Hillesheim,
Yevgen Kazakov,
Samuele Mazzi,
Felix I. Parra,
Bhavin S. Patel,
Alexander A. Schekochihin,
Ziga Stancar,
the JET Contributors,
the EUROfusion Tokamak Exploitation Team
Abstract:
We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with th…
▽ More
We report the first experimental detection of a zero-frequency fluctuation that is pumped by an Alfvén mode in a magnetically confined plasma. Core-localized bidirectional Alfvén modes of frequency inside the toroidicity-induced gap (and its harmonics) exhibit three-wave coupling interactions with a zero-frequency fluctuation. The observation of the zero-frequency fluctuation is consistent with theoretical and numerical predictions of zonal modes pumped by Alfvén modes, and is correlated with an increase in the deep core ion temperature, temperature gradient, and confinement factor $H_{89,P}$. Despite the energetic particle transport induced by the Alfvén eigenmodes, the generation of a zero-frequency fluctuation that can suppress the turbulence leads to an overall improvement of confinement.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
Correlation of the L-mode density limit with edge collisionality
Authors:
Andrew Maris,
Cristina Rea,
Alessandro Pau,
Wenhui Hu,
Bingjia Xiao,
Robert Granetz,
Earl Marmar,
the EUROfusion Tokamak Exploitation team,
the Alcator C-Mod team,
the ASDEX Upgrade team,
the DIII-D team,
the EAST team,
the TCV team
Abstract:
The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwa…
▽ More
The "density limit" is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot plant concepts must operate near or above the widely-used Greenwald limit to achieve their objectives. Evidence has also grown that the Greenwald scaling - in its remarkable simplicity - may not capture the full complexity of the disruptive density limit. In this study, we assemble a multi-machine database to quantify the effectiveness of the Greenwald limit as a predictor of the L-mode density limit and identify alternative stability metrics. We find that a two-parameter dimensionless boundary in the plasma edge, $ν_{*\rm, edge}^{\rm limit} = 3.0 β_{T,{\rm edge}}^{-0.4}$, achieves significantly higher accuracy (true negative rate of 97.7% at a true positive rate of 95%) than the Greenwald limit (true negative rate 86.1% at a true positive rate of 95%) across a multi-machine dataset including metal- and carbon-wall tokamaks (AUG, C-Mod, DIII-D, and TCV). The collisionality boundary presented here can be applied for density limit avoidance in current devices and in ITER, where it can be measured and responded to in real time.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
First 2D electron density measurements using Coherence Imaging Spectroscopy in the MAST-U Super-X divertor
Authors:
N. Lonigro,
R. Doyle,
J. S. Allcock,
B. Lipschultz,
K. Verhaegh,
C. Bowman,
D. Brida,
J. Harrison,
O. Myatra,
S. Silburn,
C. Theiler,
T. A. Wijkamp,
MAST-U Team,
the EUROfusion Tokamak Exploitation Team
Abstract:
2D profiles of electron density and neutral temperature are inferred from multi-delay Coherence Imaging Spectroscopy data of divertor plasmas using a non-linear inversion technique. The inference is based on imaging the spectral line-broadening of Balmer lines and can differentiate between the Doppler and Stark broadening components by measuring the fringe contrast at multiple interferometric dela…
▽ More
2D profiles of electron density and neutral temperature are inferred from multi-delay Coherence Imaging Spectroscopy data of divertor plasmas using a non-linear inversion technique. The inference is based on imaging the spectral line-broadening of Balmer lines and can differentiate between the Doppler and Stark broadening components by measuring the fringe contrast at multiple interferometric delays simultaneously. The model has been applied to images generated from simulated density profiles to evaluate its performance. Typical mean absolute errors of 30 percent are achieved, which are consistent with Monte Carlo uncertainty propagation accounting for noise, uncertainties in the calibrations, and in the model inputs. The analysis has been tested on experimental data from the MAST-U Super-X divertor, where it infers typical electron densities of 2-3 $10^{19}$ m$^{-3}$ and neutral temperatures of 0-2 eV during beam-heated L-mode discharges. The results are shown to be in reasonable agreement with the other available diagnostics.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Expulsion of runaway electrons using ECRH in the TCV tokamak
Authors:
J. Decker,
M. Hoppe,
U. Sheikh,
B. P. Duval,
G. Papp,
L. Simons,
T. Wijkamp,
J. Cazabonne,
S. Coda,
E. Devlaminck,
O. Ficker,
R. Hellinga,
U. Kumar,
Y. Savoye-Peysson,
L. Porte,
C. Reux,
C. Sommariva,
A. Tema Biwolé,
B. Vincent,
L. Votta,
the TCV Team,
the EUROfusion Tokamak Exploitation Team
Abstract:
Runaway electrons (REs) are a concern for tokamak fusion reactors from discharge startup to termination. A sudden localized loss of a multi-megaampere RE beam can inflict severe damage to the first wall. Should a disruption occur, the existence of a RE seed may play a significant role in the formation of a RE beam and the magnitude of its current. The application of central electron cyclotron reso…
▽ More
Runaway electrons (REs) are a concern for tokamak fusion reactors from discharge startup to termination. A sudden localized loss of a multi-megaampere RE beam can inflict severe damage to the first wall. Should a disruption occur, the existence of a RE seed may play a significant role in the formation of a RE beam and the magnitude of its current. The application of central electron cyclotron resonance heating (ECRH) in the Tokamak à Configuration Variable (TCV) reduces an existing RE seed population by up to three orders of magnitude within only a few hundred milliseconds. Applying ECRH before a disruption can also prevent the formation of a post-disruption RE beam in TCV where it would otherwise be expected. The RE expulsion rate and consequent RE current reduction are found to increase with applied ECRH power. Whereas central ECRH is effective in expelling REs, off-axis ECRH has a comparatively limited effect. A simple 0-D model for the evolution of the RE population is presented that explains the effective ECRH-induced RE expulsion results from the combined effects of increased electron temperature and enhanced RE transport.
△ Less
Submitted 22 July, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
Characteristics of the Alfvénic activity during the current quench in ASDEX Upgrade
Authors:
P. Heinrich,
G. Papp,
Ph. Lauber,
G. Pautasso,
M. Dunne,
M. Maraschek,
V. Igochine,
O. Linder,
the ASDEX Upgrade Team,
the EUROfusion Tokamak Exploitation Team
Abstract:
ASDEX Upgrade has developed multiple massive gas injection (MGI) scenarios to investigate runaway electron (RE) dynamics. During the current quench of the MGI induced disruptions, Alfvénic activity is observed in the 300-800 kHz range. With the help of a mode tracing algorithm based on Fourier spectrograms, mode behaviour was classified for 180 discharges. The modes have been identified as global…
▽ More
ASDEX Upgrade has developed multiple massive gas injection (MGI) scenarios to investigate runaway electron (RE) dynamics. During the current quench of the MGI induced disruptions, Alfvénic activity is observed in the 300-800 kHz range. With the help of a mode tracing algorithm based on Fourier spectrograms, mode behaviour was classified for 180 discharges. The modes have been identified as global Alfvén eigenmodes using linear gyrokinetic MHD simulations. Changes in the Alfvén continuum during the quench are proposed as explanation for the strong frequency sweep observed. A systematic statistical analysis shows no significant connection of the mode characteristics to the dynamics of the subsequent runaway electron beams. In our studies, the appearance and amplitude of the modes does not seem to affect the potential subsequent runaway beam. Beyond the scope of the 180 investigated dedicated RE experiments, the Alfvénic activity is also observed in natural disruptions with no RE beam forming.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
Comparison of detachment in Ohmic plasmas with positive and negative triangularity
Authors:
O. Février,
C. K. Tsui,
G. Durr-Legoupil-Nicoud,
C. Theiler,
M. Carpita,
S. Coda,
C. Colandrea,
B. P. Duval,
S. Gorno,
E. Huett,
B. Linehan,
A. Perek,
L. Porte,
H. Reimerdes,
O. Sauter,
E. Tonello,
M. Zurita,
T. Bolzonella,
F. Sciortino,
the TCV Team,
the EUROfusion Tokamak Exploitation Team
Abstract:
In recent years, negative triangularity (NT) has emerged as a potential high-confinement L-mode reactor solution. In this work, detachment is investigated using core density ramps in lower single null Ohmic L-mode plasmas across a wide range of upper, lower, and average triangularity (the mean of upper and lower triangularity: $δ$) in the TCV tokamak. It is universally found that detachment is mor…
▽ More
In recent years, negative triangularity (NT) has emerged as a potential high-confinement L-mode reactor solution. In this work, detachment is investigated using core density ramps in lower single null Ohmic L-mode plasmas across a wide range of upper, lower, and average triangularity (the mean of upper and lower triangularity: $δ$) in the TCV tokamak. It is universally found that detachment is more difficult to access for NT shaping. The outer divertor leg of discharges with $δ\approx -0.3$ could not be cooled to below $5~\mathrm{eV}$ through core density ramps alone. The behavior of the upstream plasma and geometrical divertor effects (e.g. a reduced connection length with negative lower triangularity) do not fully explain the challenges in detaching NT plasmas. Langmuir probe measurements of the target heat flux widths ($λ_q$) were constant to within 30% across an upper triangularity scan, while the spreading factor $S$ was lower by up to 50% for NT, indicating a generally lower integral Scrape-Off Layer width, $λ_{int}$. The line-averaged core density was typically higher for NT discharges for a given fuelling rate, possibly linked to higher particle confinement in NT. Conversely, the divertor neutral pressure and integrated particle fluxes to the targets were typically lower for the same line-averaged density, indicating that NT configurations may be closer to the sheath-limited regime than their PT counterparts, which may explain why NT is more challenging to detach.
△ Less
Submitted 23 January, 2024; v1 submitted 18 October, 2023;
originally announced October 2023.
