-
Multi-feature Compensatory Motion Analysis for Reaching Motions Over a Discretely Sampled Workspace
Authors:
Qihan Yang,
Yuri Gloumakov,
Adam J. Spiers
Abstract:
The absence of functional arm joints, such as the wrist, in upper extremity prostheses leads to compensatory motions in the users' daily activities. Compensatory motions have been previously studied for varying task protocols and evaluation metrics. However, the movement targets' spatial locations in previous protocols were not standardised and incomparable between studies, and the evaluation metr…
▽ More
The absence of functional arm joints, such as the wrist, in upper extremity prostheses leads to compensatory motions in the users' daily activities. Compensatory motions have been previously studied for varying task protocols and evaluation metrics. However, the movement targets' spatial locations in previous protocols were not standardised and incomparable between studies, and the evaluation metrics were rudimentary. This work analysed compensatory motions in the final pose of subjects reaching across a discretely sampled 7*7 2D grid of targets under unbraced (normative) and braced (compensatory) conditions. For the braced condition, a bracing system was applied to simulate a transradial prosthetic limb by restricting participants' wrist joints. A total of 1372 reaching poses were analysed, and a Compensation Index was proposed to indicate the severity level of compensation. This index combined joint spatial location analysis, joint angle analysis, separability analysis, and machine learning (clustering) analysis. The individual analysis results and the final Compensation Index were presented in heatmap format to correspond to the spatial layout of the workspace, revealing the spatial dependency of compensatory motions. The results indicate that compensatory motions occur mainly in a right trapezoid region in the upper left area and a vertical trapezoid region in the middle left area for right-handed subjects reaching horizontally and vertically. Such results might guide motion selection in clinical rehabilitation, occupational therapy, and prosthetic evaluation to help avoid residual limb pain and overuse syndromes.
△ Less
Submitted 23 August, 2024;
originally announced September 2024.
-
Naturalistic Robot Arm Trajectory Generation via Representation Learning
Authors:
Jayjun Lee,
Adam J. Spiers
Abstract:
The integration of manipulator robots in household environments suggests a need for more predictable and human-like robot motion. This holds especially true for wheelchair-mounted assistive robots that can support the independence of people with paralysis. One method of generating naturalistic motion trajectories is via the imitation of human demonstrators. This paper explores a self-supervised im…
▽ More
The integration of manipulator robots in household environments suggests a need for more predictable and human-like robot motion. This holds especially true for wheelchair-mounted assistive robots that can support the independence of people with paralysis. One method of generating naturalistic motion trajectories is via the imitation of human demonstrators. This paper explores a self-supervised imitation learning method using an autoregressive spatio-temporal graph neural network for an assistive drinking task. We address learning from diverse human motion trajectory data that were captured via wearable IMU sensors on a human arm as the action-free task demonstrations. Observed arm motion data from several participants is used to generate natural and functional drinking motion trajectories for a UR5e robot arm.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
InstaGrasp: An Entirely 3D Printed Adaptive Gripper with TPU Soft Elements and Minimal Assembly Time
Authors:
Xin Zhou,
Adam J. Spiers
Abstract:
Fabricating existing and popular open-source adaptive robotic grippers commonly involves using multiple professional machines, purchasing a wide range of parts, and tedious, time-consuming assembly processes. This poses a significant barrier to entry for some robotics researchers and drives others to opt for expensive commercial alternatives. To provide both parties with an easier and cheaper (und…
▽ More
Fabricating existing and popular open-source adaptive robotic grippers commonly involves using multiple professional machines, purchasing a wide range of parts, and tedious, time-consuming assembly processes. This poses a significant barrier to entry for some robotics researchers and drives others to opt for expensive commercial alternatives. To provide both parties with an easier and cheaper (under 100GBP) solution, we propose a novel adaptive gripper design where every component (with the exception of actuators and the screws that come packaged with them) can be fabricated on a hobby-grade 3D printer, via a combination of inexpensive and readily available PLA and TPU filaments. This approach means that the gripper's tendons, flexure joints and finger pads are now printed, as a replacement for traditional string-tendons and molded urethane flexures and pads. A push-fit systems results in an assembly time of under 10 minutes. The gripper design is also highly modular and requires only a few minutes to replace any part, leading to extremely user-friendly maintenance and part modifications. An extensive stress test has shown a level of durability more than suitable for research, whilst grasping experiments (with perturbations) using items from the YCB object set has also proven its mechanical adaptability to be highly satisfactory.
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
E-TRoll: Tactile Sensing and Classification via A Simple Robotic Gripper for Extended Rolling Manipulations
Authors:
Xin Zhou,
Adam J. Spiers
Abstract:
Robotic tactile sensing provides a method of recognizing objects and their properties where vision fails. Prior work on tactile perception in robotic manipulation has frequently focused on exploratory procedures (EPs). However, the also-human-inspired technique of in-hand-manipulation can glean rich data in a fraction of the time of EPs. We propose a simple 3-DOF robotic hand design, optimized for…
▽ More
Robotic tactile sensing provides a method of recognizing objects and their properties where vision fails. Prior work on tactile perception in robotic manipulation has frequently focused on exploratory procedures (EPs). However, the also-human-inspired technique of in-hand-manipulation can glean rich data in a fraction of the time of EPs. We propose a simple 3-DOF robotic hand design, optimized for object rolling tasks via a variable-width palm and associated control system. This system dynamically adjusts the distance between the finger bases in response to object behavior. Compared to fixed finger bases, this technique significantly increases the area of the object that is exposed to finger-mounted tactile arrays during a single rolling motion (an increase of over 60% was observed for a cylinder with a 30-millimeter diameter). In addition, this paper presents a feature extraction algorithm for the collected spatiotemporal dataset, which focuses on object corner identification, analysis, and compact representation. This technique drastically reduces the dimensionality of each data sample from 10 x 1500 time series data to 80 features, which was further reduced by Principal Component Analysis (PCA) to 22 components. An ensemble subspace k-nearest neighbors (KNN) classification model was trained with 90 observations on rolling three different geometric objects, resulting in a three-fold cross-validation accuracy of 95.6% for object shape recognition.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Region-Based Planning for 3D Within-Hand-Manipulation via Variable Friction Robot Fingers and Extrinsic Contacts
Authors:
Alp Sahin,
Adam J. Spiers,
Berk Calli
Abstract:
Attempts to achieve robotic Within-Hand-Manipulation (WIHM) generally utilize either high-DOF robotic hands with elaborate sensing apparatus or multi-arm robotic systems. In prior work we presented a simple robot hand with variable friction robot fingers, which allow a low-complexity approach to within-hand object translation and rotation, though this manipulation was limited to planar actions. In…
▽ More
Attempts to achieve robotic Within-Hand-Manipulation (WIHM) generally utilize either high-DOF robotic hands with elaborate sensing apparatus or multi-arm robotic systems. In prior work we presented a simple robot hand with variable friction robot fingers, which allow a low-complexity approach to within-hand object translation and rotation, though this manipulation was limited to planar actions. In this work we extend the capabilities of this system to 3D manipulation with a novel region-based WIHM planning algorithm and utilizing extrinsic contacts. The ability to modulate finger friction enhances extrinsic dexterity for three-dimensional WIHM, and allows us to operate in the quasi-static level. The region-based planner automatically generates 3D manipulation sequences with a modified A* formulation that navigates the contact regions between the fingers and the object surface to reach desired regions. Central to this method is a set of object-motion primitives (i.e. within-hand sliding, rotation and pivoting), which can easily be achieved via changing contact friction. A wide range of goal regions can be achieved via this approach, which is demonstrated via real robot experiments following a standardized in-hand manipulation benchmarking protocol.
△ Less
Submitted 20 May, 2021; v1 submitted 13 November, 2020;
originally announced November 2020.
-
Dimensionality Reduction and Motion Clustering during Activities of Daily Living: 3, 4, and 7 Degree-of-Freedom Arm Movements
Authors:
Yuri Gloumakov,
Adam J. Spiers,
Aaron M. Dollar
Abstract:
The wide variety of motions performed by the human arm during daily tasks makes it desirable to find representative subsets to reduce the dimensionality of these movements for a variety of applications, including the design and control of robotic and prosthetic devices. This paper presents a novel method and the results of an extensive human subjects study to obtain representative arm joint angle…
▽ More
The wide variety of motions performed by the human arm during daily tasks makes it desirable to find representative subsets to reduce the dimensionality of these movements for a variety of applications, including the design and control of robotic and prosthetic devices. This paper presents a novel method and the results of an extensive human subjects study to obtain representative arm joint angle trajectories that span naturalistic motions during Activities of Daily Living (ADLs). In particular, we seek to identify sets of useful motion trajectories of the upper limb that are functions of a single variable, allowing, for instance, an entire prosthetic or robotic arm to be controlled with a single input from a user, along with a means to select between motions for different tasks. Data driven approaches are used to obtain clusters as well as representative motion averages for the full-arm 7 degree of freedom (DOF), elbow-wrist 4 DOF, and wrist-only 3 DOF motions. The proposed method makes use of well-known techniques such as dynamic time warping (DTW) to obtain a divergence measure between motion segments, DTW barycenter averaging (DBA) to obtain averages, Ward's distance criterion to build hierarchical trees, batch-DTW to simultaneously align multiple motion data, and functional principal component analysis (fPCA) to evaluate cluster variability. The clusters that emerge associate various recorded motions into primarily hand start and end location for the full-arm system, motion direction for the wrist-only system, and an intermediate between the two qualities for the elbow-wrist system. The proposed clustering methodology is justified by comparing results against alternative approaches.
△ Less
Submitted 16 February, 2020;
originally announced March 2020.
