-
Boundary Zonal Flow in Rotating Turbulent Rayleigh-Bénard Convection
Authors:
Xuan Zhang,
Dennis P. M. van Gils,
Susanne Horn,
Marcel Wedi,
Lukas Zwirner,
Guenter Ahlers,
Robert E. Ecke,
Stephan Weiss,
Eberhard Bodenschatz,
Olga Shishkina
Abstract:
For rapidly rotating turbulent Rayleigh--Bénard convection in a slender cylindrical cell, experiments and direct numerical simulations reveal a boundary zonal flow (BZF) that replaces the classical large-scale circulation. The BZF is located near the vertical side wall and enables enhanced heat transport there. Although the azimuthal velocity of the BZF is cyclonic (in the rotating frame), the tem…
▽ More
For rapidly rotating turbulent Rayleigh--Bénard convection in a slender cylindrical cell, experiments and direct numerical simulations reveal a boundary zonal flow (BZF) that replaces the classical large-scale circulation. The BZF is located near the vertical side wall and enables enhanced heat transport there. Although the azimuthal velocity of the BZF is cyclonic (in the rotating frame), the temperature is an anticyclonic traveling wave of mode one whose signature is a bimodal temperature distribution near the radial boundary. The BZF width is found to scale like $Ra^{1/4}Ek^{2/3}$ where the Ekman number $Ek$ decreases with increasing rotation rate.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Twente Mass and Heat Transfer Water Tunnel: Temperature controlled turbulent multiphase channel flow with heat and mass transfer
Authors:
Biljana Gvozdić,
On-Yu Dung,
Dennis P. M. van Gils,
Gert-Wim H. Bruggert,
Elise Alméras,
Chao Sun,
Detlef Lohse,
Sander G. Huisman
Abstract:
A new vertical water tunnel with global temperature control and the possibility for bubble and local heat & mass injection has been designed and constructed. The new facility offers the possibility to accurately study heat and mass transfer in turbulent multiphase flow (gas volume fraction up to $8\%$) with a Reynolds-number range from $1.5 \times 10^4$ to $3 \times 10^5$ in the case of water at r…
▽ More
A new vertical water tunnel with global temperature control and the possibility for bubble and local heat & mass injection has been designed and constructed. The new facility offers the possibility to accurately study heat and mass transfer in turbulent multiphase flow (gas volume fraction up to $8\%$) with a Reynolds-number range from $1.5 \times 10^4$ to $3 \times 10^5$ in the case of water at room temperature. The tunnel is made of high-grade stainless steel permitting the use of salt solutions in excess of 15$\%$ mass fraction. The tunnel has a volume of 300 liters. The tunnel has three interchangeable measurement sections of $1$ m height but with different cross sections ($0.3 \times 0.04 m^2$, $0.3 \times 0.06 m^2$, $0.3 \times 0.08 m^2$). The glass vertical measurement sections allow for optical access to the flow, enabling techniques such as laser Doppler anemometry, particle image velocimetry, particle tracking velocimetry, and laser-induced fluorescent imaging. Local sensors can be introduced from the top and can be traversed using a built-in traverse system, allowing for e.g. local temperature, hot-wire, or local phase measurements. Combined with simultaneous velocity measurements, the local heat flux in single phase and two phase turbulent flows can thus be studied quantitatvely and precisely.
△ Less
Submitted 15 February, 2019;
originally announced February 2019.
-
Experimental investigation of heat transport in inhomogeneous bubbly flow
Authors:
Biljana Gvozdic,
On-Yu Dung,
Elise Almeras,
Dennis P. M. van Gils,
Detlef Lohse,
Sander G. Huisman,
Chao Sun
Abstract:
In this work we study the heat transport in inhomogeneous bubbly flow. The experiments were performed in a rectangular bubble column heated from one side wall and cooled from the other, with millimetric bubbles introduced through one half of the injection section (close to the hot wall or close to the cold wall). We characterise the global heat transport while varying two parameters: the gas volum…
▽ More
In this work we study the heat transport in inhomogeneous bubbly flow. The experiments were performed in a rectangular bubble column heated from one side wall and cooled from the other, with millimetric bubbles introduced through one half of the injection section (close to the hot wall or close to the cold wall). We characterise the global heat transport while varying two parameters: the gas volume fraction $α= 0.4\% - 5.1 \%$, and the Rayleigh number $Ra_H=4\times10^9-2.2\times10^{10}$. As captured by imaging and characterised using Laser Doppler Anemometry (LDA), different flow regimes occur with increasing gas flow rates. In the generated inhomogeneous bubbly flow there are three main contributions to the mixing: (\textit{i}) transport by the buoyancy driven recirculation, (\textit{ii}) bubble induced turbulence (BIT) and (\textit{iii}) shear-induced turbulence (SIT). The strength of these contributions and their interplay depends on the gas volume fraction which is reflected in the measured heat transport enhancement. We compare our results with the findings for heat transport in homogeneous bubbly flow from Gvozdi{ć} \emph{et al.} (2018). We find that for the lower gas volume fractions ($α<4\%$), inhomogeneous bubbly injection results in better heat transport due to induced large-scale circulation. In contrast, for $α>4\%$, when the contribution of SIT becomes stronger, but so does the competition between all three contributions, the homogeneous injection is more efficient.
△ Less
Submitted 28 November, 2018;
originally announced November 2018.
-
Experimental investigation of heat transport in homogeneous bubbly flow
Authors:
Biljana Gvozdic,
Elise Almeras,
Varghese Mathai,
Xiaojue Zhu,
Dennis P. M. van Gils,
Roberto Verzicco,
Sander G. Huisman,
Chao Sun,
Detlef Lohse
Abstract:
We present results on the global and local characterisation of heat transport in homogeneous bubbly flow. Experimental measurements were performed with and without the injection of $\sim 2.5$ mm diameter bubbles (corresponding to $Re_b \approx 600$) in a rectangular water column heated from one side and cooled from the other. The gas volume fraction $α$ was varied in the range $0\% - 5\%$, and the…
▽ More
We present results on the global and local characterisation of heat transport in homogeneous bubbly flow. Experimental measurements were performed with and without the injection of $\sim 2.5$ mm diameter bubbles (corresponding to $Re_b \approx 600$) in a rectangular water column heated from one side and cooled from the other. The gas volume fraction $α$ was varied in the range $0\% - 5\%$, and the Rayleigh number $Ra_H$ in the range $4.0 \times 10^9 - 1.2 \times 10^{11}$. We find that the global heat transfer is enhanced up to 20 times due to bubble injection. Interestingly, for bubbly flow, for our lowest concentration $α= 0.5\% $ onwards, the Nusselt number $\overline{Nu}$ is nearly independent of $Ra_H$, and depends solely on the gas volume fraction~$α$. We observe the scaling $\overline{Nu} \propto α^{0.45}$, which is suggestive of a diffusive transport mechanism. Through local temperature measurements, we show that the bubbles induce a huge increase in the strength of liquid temperature fluctuations, e.g. by a factor of 200 for $α= 0.9\%$. Further, we compare the power spectra of the temperature fluctuations for the single- and two-phase cases. In the single-phase cases, most of the spectral power of the temperature fluctuations is concentrated in the large-scale rolls. However, with the injection of bubbles, we observe intense fluctuations over a wide range of scales, extending up to very high frequencies. Thus, while in the single-phase flow the thermal boundary layers control the heat transport, once the bubbles are injected, the bubble-induced liquid agitation governs the process from a very small bubble concentration onwards.
△ Less
Submitted 28 February, 2018;
originally announced February 2018.
-
Logarithmic Spatial Variations and Universal $f^{-1}$ Power Spectra of Temperature Fluctuations in Turbulent Rayleigh-Bénard Convection
Authors:
Xiaozhou He,
Dennis P. M. van Gils,
Eberhard Bodenschatz,
Guenter Ahlers
Abstract:
We report measurements of the temperature variance $σ^2(z,r)$ and frequency power spectrum $P(f,z,r)$ ($z$ is the distance from the sample bottom and $r$ the radial coordinate) in turbulent Rayleigh-Bénard convection (RBC) for Rayleigh numbers $\textrm{Ra} = 1.6\times10^{13}$ and $1.1\times10^{15}$ and for a Prandtl number $\textrm{Pr} \simeq 0.8$ for a sample with a height $L = 224$ cm and aspect…
▽ More
We report measurements of the temperature variance $σ^2(z,r)$ and frequency power spectrum $P(f,z,r)$ ($z$ is the distance from the sample bottom and $r$ the radial coordinate) in turbulent Rayleigh-Bénard convection (RBC) for Rayleigh numbers $\textrm{Ra} = 1.6\times10^{13}$ and $1.1\times10^{15}$ and for a Prandtl number $\textrm{Pr} \simeq 0.8$ for a sample with a height $L = 224$ cm and aspect ratio $D/L = 0.50$ ($D$ is the diameter). For $z/L$ less than or similar to $0.1$ $σ^2(z,r)$ was consistent with a logarithmic dependence on $z$, and there was a universal (independent of $\textrm{Ra}$, $r$, and $z$) normalized spectrum which, for $0.02$ less than or similar to $fτ_0$ less than or similar to $0.2$, had the form $P(fτ_0) = P_0 (fτ_0)^{-1}$ with $P_0 =0.208 \pm 0.008$ a universal constant. Here $τ_0 = \sqrt{2R}$ where $R$ is the radius of curvature of the temperature autocorrelation function $C(τ)$ at $τ= 0$. For $z/L \simeq 0.5$ the measurements yielded $P(fτ_0) \sim (fτ_0)^{-α}$ with $α$ in the range from 3/2 to 5/3. All the results are similar to those for velocity fluctuations in shear flows at sufficiently large Reynolds numbers, suggesting the possibility of an analogy between the flows that is yet to be determined in detail.
△ Less
Submitted 2 May, 2014;
originally announced May 2014.
-
Optimal Taylor-Couette flow: Radius ratio dependence
Authors:
Rodolfo Ostilla Monico,
Sander G. Huisman,
Tim J. G. Jannink,
Dennis P. M. van Gils,
Roberto Verzicco,
Siegfried Grossmann,
Chao Sun,
Detlef Lohse
Abstract:
Taylor-Couette flow with independently rotating inner (i) and outer (o) cylinders is explored numerically and experimentally to determine the effects of the radius ratio η on the system response. Numerical simulations reach Reynolds numbers of up to Re_i=9.5 x 10^3 and Re_o=5x10^3, corresponding to Taylor numbers of up to Ta=10^8 for four different radius ratios η=r_i/r_o between 0.5 and 0.909. Th…
▽ More
Taylor-Couette flow with independently rotating inner (i) and outer (o) cylinders is explored numerically and experimentally to determine the effects of the radius ratio η on the system response. Numerical simulations reach Reynolds numbers of up to Re_i=9.5 x 10^3 and Re_o=5x10^3, corresponding to Taylor numbers of up to Ta=10^8 for four different radius ratios η=r_i/r_o between 0.5 and 0.909. The experiments, performed in the Twente Turbulent Taylor-Couette (T^3C) setup, reach Reynolds numbers of up to Re_i=2x10^6$ and Re_o=1.5x10^6, corresponding to Ta=5x10^{12} for η=0.714-0.909. Effective scaling laws for the torque J^ω(Ta) are found, which for sufficiently large driving Ta are independent of the radius ratio η. As previously reported for η=0.714, optimum transport at a non-zero Rossby number Ro=r_i|ω_i-ω_o|/[2(r_o-r_i)ω_o] is found in both experiments and numerics. Ro_opt is found to depend on the radius ratio and the driving of the system. At a driving in the range between {Ta\sim3\cdot10^8} and {Ta\sim10^{10}}, Ro_opt saturates to an asymptotic η-dependent value. Theoretical predictions for the asymptotic value of Ro_{opt} are compared to the experimental results, and found to differ notably. Furthermore, the local angular velocity profiles from experiments and numerics are compared, and a link between a flat bulk profile and optimum transport for all radius ratios is reported.
△ Less
Submitted 29 October, 2013; v1 submitted 23 April, 2013;
originally announced April 2013.
-
Applying Laser Doppler Anemometry inside a Taylor-Couette geometry - Using a ray-tracer to correct for curvature effects
Authors:
Sander G. Huisman,
Dennis P. M. van Gils,
Chao Sun
Abstract:
In the present work it will be shown how the curvature of the outer cylinder affects Laser Doppler anemometry measurements inside a Taylor-Couette apparatus. The measurement position and the measured velocity are altered by curved surfaces. Conventional methods for curvature correction are not applicable to our setup, and it will be shown how a ray-tracer can be used to solve this complication.…
▽ More
In the present work it will be shown how the curvature of the outer cylinder affects Laser Doppler anemometry measurements inside a Taylor-Couette apparatus. The measurement position and the measured velocity are altered by curved surfaces. Conventional methods for curvature correction are not applicable to our setup, and it will be shown how a ray-tracer can be used to solve this complication.
By using a ray-tracer the focal position can be calculated, and the velocity can be corrected. The results of the ray-tracer are verified by measuring an a priori known velocity field, and after applying refractive corrections good agreement with theoretical predictions are found. The methods described in this paper are applied to measure the azimuthal velocity profiles in high Reynolds number Taylor-Couette flow for the case of outer cylinder rotation.
△ Less
Submitted 30 March, 2012;
originally announced March 2012.
-
Angular momentum transport and turbulence in laboratory models of Keplerian flows
Authors:
M. S. Paoletti,
Dennis P. M. van Gils,
B. Dubrulle,
Chao Sun,
Detlef Lohse,
D. P. Lathrop
Abstract:
We present angular momentum transport (torque) measurements in two recent experimental studies of the turbulent flow between independently rotating cylinders. In addition to these studies, we reanalyze prior torque measurements to expand the range of control parameters for the experimental Taylor-Couette flows. We find that the torque may be described as a product of functions that depend only on…
▽ More
We present angular momentum transport (torque) measurements in two recent experimental studies of the turbulent flow between independently rotating cylinders. In addition to these studies, we reanalyze prior torque measurements to expand the range of control parameters for the experimental Taylor-Couette flows. We find that the torque may be described as a product of functions that depend only on the Reynolds number, which describes the turbulent driving intensity, and the rotation number, which characterizes the effects of global rotation. For a given Reynolds number, the global angular momentum transport for Keplerian-like flow profiles is approximately 14% of the maximum achievable transport rate. We estimate that this level of transport would produce an accretion rate of $\dot{M}/\dot{M_0} \sim 10^{-3}$ in astrophysical disks. We argue that this level of transport from hydrodynamics alone could be significant.
△ Less
Submitted 29 November, 2011;
originally announced November 2011.
-
The importance of bubble deformability for strong drag reduction in bubbly turbulent Taylor-Couette flow
Authors:
Dennis P. M. van Gils,
Daniela Narezo Guzman,
Chao Sun,
Detlef Lohse
Abstract:
Bubbly turbulent Taylor-Couette (TC) flow is globally and locally studied at Reynolds numbers of Re = 5 x 10^5 to 2 x 10^6 with a stationary outer cylinder and a mean bubble diameter around 1 mm. We measure the drag reduction (DR) based on the global dimensional torque as a function of the global gas volume fraction a_global over the range 0% to 4%. We observe a moderate DR of up to 7% for Re = 5.…
▽ More
Bubbly turbulent Taylor-Couette (TC) flow is globally and locally studied at Reynolds numbers of Re = 5 x 10^5 to 2 x 10^6 with a stationary outer cylinder and a mean bubble diameter around 1 mm. We measure the drag reduction (DR) based on the global dimensional torque as a function of the global gas volume fraction a_global over the range 0% to 4%. We observe a moderate DR of up to 7% for Re = 5.1 x 10^5. Significantly stronger DR is achieved for Re = 1.0 x 10^6 and 2.0 x 10^6 with, remarkably, more than 40% of DR at Re = 2.0 x 10^6 and a_global = 4%.
To shed light on the two apparently different regimes of moderate DR and strong DR, we investigate the local liquid flow velocity and the local bubble statistics, in particular the radial gas concentration profiles and the bubble size distribution, for the two different cases; Re = 5.1 x 10^5 in the moderate DR regime and Re = 1.0 x 10^6 in the strong DR regime, both at a_global = 3 +/- 0.5%.
By defining and measuring a local bubble Weber number (We) in the TC gap close to the IC wall, we observe that the crossover from the moderate to the strong DR regime occurs roughly at the crossover of We ~ 1. In the strong DR regime at Re = 1.0 x 10^6 we find We > 1, reaching a value of 9 (+7, -2) when approaching the inner wall, indicating that the bubbles increasingly deform as they draw near the inner wall. In the moderate DR regime at Re = 5.1 x 10^5 we find We ~ 1, indicating more rigid bubbles, even though the mean bubble diameter is larger, namely 1.2 (+0.7, -0.1) mm, as compared to the Re = 1.0 x 10^6 case, where it is 0.9 (+0.6, -0.1) mm. We conclude that bubble deformability is a relevant mechanism behind the observed strong DR. These local results match and extend the conclusions from the global flow experiments as found by van den Berg et al. (2005) and from the numerical simulations by Lu, Fernandez & Tryggvason (2005).
△ Less
Submitted 6 May, 2013; v1 submitted 29 November, 2011;
originally announced November 2011.
-
Optimal Taylor-Couette turbulence
Authors:
Dennis P. M. van Gils,
Sander G. Huisman,
Siegfried Grossmann,
Chao Sun,
Detlef Lohse
Abstract:
Strongly turbulent Taylor-Couette flow with independently rotating inner and outer cylinders with a radius ratio of η= 0.716 is experimentally studied. From global torque measurements, we analyse the dimensionless angular velocity flux Nu_ω(Ta, a) as a function of the Taylor number Ta and the angular velocity ratio a = -ω_o/ω_i in the large-Taylor-number regime 10^{11} \lesssim Ta \lesssim 10^{13}…
▽ More
Strongly turbulent Taylor-Couette flow with independently rotating inner and outer cylinders with a radius ratio of η= 0.716 is experimentally studied. From global torque measurements, we analyse the dimensionless angular velocity flux Nu_ω(Ta, a) as a function of the Taylor number Ta and the angular velocity ratio a = -ω_o/ω_i in the large-Taylor-number regime 10^{11} \lesssim Ta \lesssim 10^{13}. We analyse the data with the common power-law ansatz for the dimensionless angular velocity transport flux Nu_ω(Ta, a) = f(a)Ta^γ, with an amplitude f(a) and an exponent γ. The data are consistent with one effective exponent γ= 0.39\pm0.03 for all a. The amplitude of the angular velocity flux f(a) = Nu_ω(Ta, a)/Ta^0.39 is measured to be maximal at slight counter-rotation, namely at an angular velocity ratio of a_opt = 0.33\pm0.04. This value is theoretically interpreted as the result of a competition between the destabilizing inner cylinder rotation and the stabilizing but shear-enhancing outer cylinder counter-rotation. With the help of laser Doppler anemometry, we provide angular velocity profiles and identify the radial position r_n of the neutral line. While for moderate counter-rotation -0.40 ω_i \lesssim ω_o < 0, the neutral line still remains close to the outer cylinder and the probability distribution function (p.d.f.) of the bulk angular velocity is observed to be monomodal. For stronger counter-rotation the neutral line is pushed inwards towards the inner cylinder; in this regime the p.d.f. of the bulk angular velocity becomes bimodal, reflecting intermittent bursts of turbulent structures beyond the neutral line into the outer flow domain, which otherwise is stabilized by the counter-rotating outer cylinder. Finally, a hypothesis is offered allowing a unifying view for all these various results.
△ Less
Submitted 2 October, 2012; v1 submitted 27 November, 2011;
originally announced November 2011.
-
Ultimate Turbulent Taylor-Couette Flow
Authors:
Sander G. Huisman,
Dennis P. M. van Gils,
Siegfried Grossmann,
Chao Sun,
Detlef Lohse
Abstract:
The flow structure of strongly turbulent Taylor-Couette flow with Reynolds numbers up to Re_i = 2*10^6 of the inner cylinder is experimentally examined with high-speed particle image velocimetry (PIV). The wind Reynolds numbers Re_w of the turbulent Taylor-vortex flow is found to scale as Re_w ~ Ta^(1/2), exactly as predicted for the ultimate turbulence regime, in which the boundary layers are tur…
▽ More
The flow structure of strongly turbulent Taylor-Couette flow with Reynolds numbers up to Re_i = 2*10^6 of the inner cylinder is experimentally examined with high-speed particle image velocimetry (PIV). The wind Reynolds numbers Re_w of the turbulent Taylor-vortex flow is found to scale as Re_w ~ Ta^(1/2), exactly as predicted for the ultimate turbulence regime, in which the boundary layers are turbulent. The dimensionless angular velocity flux has an effective scaling of Nu_ω ~ Ta^0.38, also in correspondence with turbulence in the ultimate regime. The scaling of Nu_ω is confirmed by local angular velocity flux measurements extracted from high-speed PIV measurements: though the flux shows huge fluctuations, its spatial and temporal average nicely agrees with the result from the global torque measurements.
△ Less
Submitted 31 October, 2011;
originally announced November 2011.
-
The Twente turbulent Taylor-Couette (T3C) facility: Strongly turbulent (multiphase) flow between two independently rotating cylinders
Authors:
Dennis P. M. van Gils,
Gert-Wim Bruggert,
Daniel P. Lathrop,
Chao Sun,
Detlef Lohse
Abstract:
A new turbulent Taylor-Couette system consisting of two independently rotating cylinders has been constructed. The gap between the cylinders has a height of 0.927 m, an inner radius of 0.200 m, and a variable outer radius (from 0.279 to 0.220 m). The maximum angular rotation rates of the inner and outer cylinder are 20 and 10 Hz, respectively, resulting in Reynolds numbers up to 3.4 x 10^6 with wa…
▽ More
A new turbulent Taylor-Couette system consisting of two independently rotating cylinders has been constructed. The gap between the cylinders has a height of 0.927 m, an inner radius of 0.200 m, and a variable outer radius (from 0.279 to 0.220 m). The maximum angular rotation rates of the inner and outer cylinder are 20 and 10 Hz, respectively, resulting in Reynolds numbers up to 3.4 x 10^6 with water as working fluid. With this Taylor-Couette system, the parameter space (Re_i, Re_o, η) extends to (2.0 x 10^6, {\pm}1.4 x 10^6, 0.716-0.909). The system is equipped with bubble injectors, temperature control, skin-friction drag sensors, and several local sensors for studying turbulent single-phase and two-phase flows. Inner cylinder load cells detect skin-friction drag via torque measurements. The clear acrylic outer cylinder allows the dynamics of the liquid flow and the dispersed phase (bubbles, particles, fibers, etc.) inside the gap to be investigated with specialized local sensors and nonintrusive optical imaging techniques. The system allows study of both Taylor-Couette flow in a high-Reynolds-number regime, and the mechanisms behind skin-friction drag alterations due to bubble injection, polymer injection, and surface hydrophobicity and roughness.
△ Less
Submitted 23 February, 2011; v1 submitted 6 November, 2010;
originally announced November 2010.
-
Torque Scaling in Turbulent Taylor-Couette Flow with Co- and Counterrotating Cylinders
Authors:
Dennis P. M. van Gils,
Sander G. Huisman,
Gert-Wim Bruggert,
Chao Sun,
Detlef Lohse
Abstract:
We analyze the global transport properties of turbulent Taylor-Couette flow in the strongly turbulent regime for independently rotating outer and inner cylinders, reaching Reynolds numbers of the inner and outer cylinders of Re_i = 2 x 10^6 and Re_o = 1.4 x 10^6, respectively. For all Re_i, Re_o, the dimensionless torque G scales as a function of the Taylor number Ta (which is proportional to the…
▽ More
We analyze the global transport properties of turbulent Taylor-Couette flow in the strongly turbulent regime for independently rotating outer and inner cylinders, reaching Reynolds numbers of the inner and outer cylinders of Re_i = 2 x 10^6 and Re_o = 1.4 x 10^6, respectively. For all Re_i, Re_o, the dimensionless torque G scales as a function of the Taylor number Ta (which is proportional to the square of the difference between the angular velocities of the inner and outer cylinders) with a universal effective scaling law G \propto Ta^{0.88}, corresponding to Nu_omega \propto Ta^{0.38} for the Nusselt number characterizing the angular velocity transport between the inner and outer cylinders. The exponent 0.38 corresponds to the ultimate regime scaling for the analogous Rayleigh-Benard system. The transport is most efficient for the counterrotating case along the diagonal in phase space with omega_o \approx -0.4 omega_i.
△ Less
Submitted 10 February, 2011; v1 submitted 5 October, 2010;
originally announced October 2010.
-
On bubble clustering and energy spectra in pseudo-turbulence
Authors:
J. Martinez,
D. Chehata,
D. P. M. van Gils,
C. Sun,
D. Lohse
Abstract:
3D-Particle Tracking (3D-PTV) and Phase Sensitive Constant Temperature Anemometry in pseudo-turbulence--i.e., flow solely driven by rising bubbles-- were performed to investigate bubble clustering and to obtain the mean bubble rise velocity, distributions of bubble velocities, and energy spectra at dilute gas concentrations ($α\leq2.2$%). To characterize the clustering the pair correlation funct…
▽ More
3D-Particle Tracking (3D-PTV) and Phase Sensitive Constant Temperature Anemometry in pseudo-turbulence--i.e., flow solely driven by rising bubbles-- were performed to investigate bubble clustering and to obtain the mean bubble rise velocity, distributions of bubble velocities, and energy spectra at dilute gas concentrations ($α\leq2.2$%). To characterize the clustering the pair correlation function $G(r,θ)$ was calculated. The deformable bubbles with equivalent bubble diameter $d_b=4-5$ mm were found to cluster within a radial distance of a few bubble radii with a preferred vertical orientation. This vertical alignment was present at both small and large scales. For small distances also some horizontal clustering was found. The large number of data-points and the non intrusiveness of PTV allowed to obtain well-converged Probability Density Functions (PDFs) of the bubble velocity. The PDFs had a non-Gaussian form for all velocity components and intermittency effects could be observed. The energy spectrum of the liquid velocity fluctuations decayed with a power law of -3.2, different from the $\approx -5/3$ found for homogeneous isotropic turbulence, but close to the prediction -3 by \cite{lance} for pseudo-turbulence.
△ Less
Submitted 8 December, 2009;
originally announced December 2009.