-
Theoretical models of Rashba spin splitting in asymmetric SrTiO3-based heterostructures
Authors:
L. W. van Heeringen,
A. McCollam,
G. A. de Wijs,
A. Fasolino
Abstract:
Rashba spin splitting in two-dimensional (2D) semiconductor systems is generally calculated in a ${\bf k} \cdot {\bf p}$ Luttinger-Kohn approach where the spin splitting due to asymmetry emerges naturally from the bulk band structure. In recent years, several new classes of 2D systems have been discovered where electronic correlations are believed to have an important role. In these correlated sys…
▽ More
Rashba spin splitting in two-dimensional (2D) semiconductor systems is generally calculated in a ${\bf k} \cdot {\bf p}$ Luttinger-Kohn approach where the spin splitting due to asymmetry emerges naturally from the bulk band structure. In recent years, several new classes of 2D systems have been discovered where electronic correlations are believed to have an important role. In these correlated systems, the effects of asymmetry leading to Rashba splitting have typically been treated phenomenologically. We compare these two approaches for the case of 2D electron systems in SrTiO$_3$-based heterostructures, and find that the two models produce fundamentally different behavior in regions of the Brillouin zone that are particularly relevant for magnetotransport. Our results demonstrate the importance of identifying the correct approach in the quantitative interpretation of experimental data, and are likely to be relevant to a range of 2D systems in correlated materials.
△ Less
Submitted 3 April, 2017;
originally announced April 2017.
-
Band offsets at the crystalline/amorphous silicon interface from first-principles
Authors:
K. Jarolimek,
E. Hazrati,
R. A. de Groot,
G. A. de Wijs
Abstract:
The band offsets between crystalline and hydrogenated amorphous silicon (a-Si:H) are key parameters governing the charge transport in modern silicon hetrojunction solar cells. They are an important input for macroscopic simulators that are used to further optimize the solar cell. Past experimental studies, using X-ray photoelectron spectroscopy (XPS) and capacitance-voltage measurements, have yiel…
▽ More
The band offsets between crystalline and hydrogenated amorphous silicon (a-Si:H) are key parameters governing the charge transport in modern silicon hetrojunction solar cells. They are an important input for macroscopic simulators that are used to further optimize the solar cell. Past experimental studies, using X-ray photoelectron spectroscopy (XPS) and capacitance-voltage measurements, have yielded conflicting results on the band offset. Here we present a computational study on the band offsets. It is based on atomistic models and density-functional theory (DFT). The amorphous part of the interface is obtained by relatively long DFT first-principles molecular-dynamics (MD) runs at an elevated temperature on 30 statistically independent samples. In order to obtain a realistic conduction band position the electronic structure of the interface is calculated with a hybrid functional. We find a slight asymmetry in the band offsets, where the offset in the valence band (0.30 eV) is larger than in the conduction band (0.17 eV). Our results are in agreement with the latest XPS measurements that report a valence band offset of 0.3 eV [M. Liebhaber et al., Appl. Phys. Lett. 106, 031601 (2015)].
△ Less
Submitted 13 October, 2016;
originally announced October 2016.
-
NMR shieldings from density functional perturbation theory: GIPAW versus all-electron calculations
Authors:
G. A. de Wijs,
R. Laskowski,
P. Blaha,
R. W. A. Havenith,
G. Kresse,
M. Marsman
Abstract:
We present a benchmark of the density functional linear response calculation of NMR shieldings within the Gauge-Including Projector-Augmented-Wave method against all-electron Augmented-Plane-Wave$+$local-orbital and uncontracted Gaussian basis set results for NMR shieldings in molecular and solid state systems. In general, excellent agreement between the aforementioned methods is obtained. Scalar…
▽ More
We present a benchmark of the density functional linear response calculation of NMR shieldings within the Gauge-Including Projector-Augmented-Wave method against all-electron Augmented-Plane-Wave$+$local-orbital and uncontracted Gaussian basis set results for NMR shieldings in molecular and solid state systems. In general, excellent agreement between the aforementioned methods is obtained. Scalar relativistic effects are shown to be quite large for nuclei in molecules in the deshielded limit. The small component makes up a substantial part of the relativistic corrections.
△ Less
Submitted 13 September, 2016;
originally announced September 2016.
-
Geometric, electronic and magnetic structure of Fe$_{x}$O$_{y}^{+}$ clusters
Authors:
R. Logemann,
G. A. de Wijs,
M. I. Katsnelson,
A. Kirilyuk
Abstract:
Correlation between geometry, electronic structure and magnetism of solids is both intriguing and elusive. This is particularly strongly manifested in small clusters, where a vast number of unusual structures appear. Here, we employ density functional theory in combination with a genetic search algorithm, GGA$+U$ and a hybrid functional to determine the structure of gas phase Fe$_{x}$O…
▽ More
Correlation between geometry, electronic structure and magnetism of solids is both intriguing and elusive. This is particularly strongly manifested in small clusters, where a vast number of unusual structures appear. Here, we employ density functional theory in combination with a genetic search algorithm, GGA$+U$ and a hybrid functional to determine the structure of gas phase Fe$_{x}$O$_{y}^{+/0}$ clusters. For Fe$_{x}$O$_{y}$ cation clusters we also calculate the corresponding vibration spectra and compare them with experiments. We successfully identify Fe$_{3}$O$_{4}^{+}$, Fe$_{4}$O$_{5}^{+}$, Fe$_{4}$O$_{6}^{+}$, Fe$_{5}$O$_{7}^{+}$ and propose structures for Fe$_{6}$O$_{8}^{+}$. Within the triangular geometric structure of Fe$_{3}$O$_{4}^{+}$ a non-collinear, ferrimagnetic and ferromagnetic state are comparable in energy. Fe$_{4}$O$_{5}^{+}$ and Fe$_{4}$O$_{6}^{+}$ are ferrimagnetic with a residual magnetic moment of 1~\muB{} due to ionization. Fe$_{5}$O$_{7}^{+}$ is ferrimagnetic due to the odd number of Fe atoms. We compare the electronic structure with bulk magnetite and find Fe$_{4}$O$_{5}^{+}$, Fe$_{4}$O$_{6}^{+}$, Fe$_{6}$O$_{8}^{+}$ to be mixed valence clusters. In contrast, in Fe$_{3}$O$_{4}^{+}$ and Fe$_{5}$O$_{7}^{+}$ all Fe are found to be trivalent.
△ Less
Submitted 20 November, 2015; v1 submitted 8 June, 2015;
originally announced June 2015.
-
Li intercalation in graphite: a van der Waals density-functional study
Authors:
E. Hazrati,
G. A. de Wijs,
G. Brocks
Abstract:
Modeling layered intercalation compounds from first principles poses a problem, as many of their properties are determined by a subtle balance between van der Waals interactions and chemical or Madelung terms, and a good description of van der Waals interactions is often lacking. Using van der Waals density functionals we study the structures, phonons and energetics of the archetype layered interc…
▽ More
Modeling layered intercalation compounds from first principles poses a problem, as many of their properties are determined by a subtle balance between van der Waals interactions and chemical or Madelung terms, and a good description of van der Waals interactions is often lacking. Using van der Waals density functionals we study the structures, phonons and energetics of the archetype layered intercalation compound Li-graphite. Intercalation of Li in graphite leads to stable systems with calculated intercalation energies of $-0.2$ to $-0.3$~eV/Li atom, (referred to bulk graphite and Li metal). The fully loaded stage 1 and stage 2 compounds LiC$_6$ and Li$_{1/2}$C$_6$ are stable, corresponding to two-dimensional $\sqrt3\times\sqrt3$ lattices of Li atoms intercalated between two graphene planes. Stage $N>2$ structures are unstable compared to dilute stage 2 compounds with the same concentration. At elevated temperatures dilute stage 2 compounds easily become disordered, but the structure of Li$_{3/16}$C$_6$ is relatively stable, corresponding to a $\sqrt7\times\sqrt7$ in-plane packing of Li atoms. First-principles calculations, along with a Bethe-Peierls model of finite temperature effects, allow for a microscopic description of the observed voltage profiles.
△ Less
Submitted 21 October, 2014;
originally announced October 2014.
-
Phonons and electron-phonon coupling in graphene-h-BN heterostructures
Authors:
Guus J. Slotman,
Gilles A. de Wijs,
Annalisa Fasolino,
Mikhail I. Katsnelson
Abstract:
First principle calculations of the phonons of graphene-BN heterostructures are presented and compared to those of the constituents. We show that AA and AB' stacking are not only energetically less favoured than AB but also dynamically unstable. We have identified low energy flat phonon branches of BN character with out of plane displacement and evaluated their coupling to electrons in graphene.
First principle calculations of the phonons of graphene-BN heterostructures are presented and compared to those of the constituents. We show that AA and AB' stacking are not only energetically less favoured than AB but also dynamically unstable. We have identified low energy flat phonon branches of BN character with out of plane displacement and evaluated their coupling to electrons in graphene.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
Interactions of adsorbed CO$_2$ on water ice at low temperatures
Authors:
L. J. Karssemeijer,
G. A. de Wijs,
H. M. Cuppen
Abstract:
We present a computational study into the adsorption properties of CO$_2$ on amorphous and crystalline water surfaces under astrophysically relevant conditions. Water and carbon dioxide are two of the most dominant species in the icy mantles of interstellar dust grains and a thorough understanding of their solid phase interactions at low temperatures is crucial for understanding the structural evo…
▽ More
We present a computational study into the adsorption properties of CO$_2$ on amorphous and crystalline water surfaces under astrophysically relevant conditions. Water and carbon dioxide are two of the most dominant species in the icy mantles of interstellar dust grains and a thorough understanding of their solid phase interactions at low temperatures is crucial for understanding the structural evolution of the ices due to thermal segregation. In this paper, a new H$_2$O-CO$_2$ interaction potential is proposed and used to model the ballistic deposition of CO$_2$ layers on water ice surfaces, and to study the individual binding sites at low coverages. Contrary to recent experimental results, we do not observe CO$_2$ island formation on any type of water substrate. Additionally, density functional theory calculations are performed to assess the importance of induced electrostatic interactions.
△ Less
Submitted 24 June, 2014;
originally announced June 2014.
-
k.p subband structure of the LaAlO3/SrTiO3 interface
Authors:
L. W. van Heeringen,
G. A. de Wijs,
A. McCollam,
J. C. Maan,
A. Fasolino
Abstract:
Heterostructures made of transition metal oxides are new tailor-made materials which are attracting much attention. We have constructed a 6-band k.p Hamiltonian and used it within the envelope function method to calculate the subband structure of a variety of LaAlO3/SrTiO3 heterostructures. By use of density functional calculations, we determine the k.p parameters describing the conduction band ed…
▽ More
Heterostructures made of transition metal oxides are new tailor-made materials which are attracting much attention. We have constructed a 6-band k.p Hamiltonian and used it within the envelope function method to calculate the subband structure of a variety of LaAlO3/SrTiO3 heterostructures. By use of density functional calculations, we determine the k.p parameters describing the conduction band edge of SrTiO3: the three effective mass parameters, L=0.6104 eV AA^2, M=9.73 eV AA^2, N=-1.616 eV AA^2, the spin orbit splitting Delta_SO=28.5 meV and the low temperature tetragonal distortion energy splitting Delta_T=2.1 meV. For confined systems we find strongly anisotropic non-parabolic subbands. As an application we calculate bands, density of states and magnetic energy levels and compare the results to Shubnikov-de Haas quantum oscillations observed in high magnetic fields. For typical heterostructures we find that electric field strength at the interface of F = 0.1 meV/AA for a carrier density of 7.2 10^{12} cm^-2 results in a subband structure that is similar to experimental results.
△ Less
Submitted 8 January, 2014; v1 submitted 28 March, 2013;
originally announced March 2013.
-
Mixed Magnetism for Refrigeration and Energy Conversion
Authors:
N. H. Dung,
Z. Q. Ou,
L. Caron,
L. Zhang,
D. T. Cam Thanh,
G. A. de Wijs,
R. A. de Groot,
K. H. J. Buschow,
E. Brück
Abstract:
The efficient coupling between lattice degrees of freedom and spin degrees of freedom in magnetic materials can be used for refrigeration and energy conversion. This coupling is enhanced in materials exhibiting the giant magnetocaloric effect. First principle electronic structure calculations on hexagonal MnFe(P, Si) reveal a new form of magnetism: the coexistence of strong and weak magnetism in a…
▽ More
The efficient coupling between lattice degrees of freedom and spin degrees of freedom in magnetic materials can be used for refrigeration and energy conversion. This coupling is enhanced in materials exhibiting the giant magnetocaloric effect. First principle electronic structure calculations on hexagonal MnFe(P, Si) reveal a new form of magnetism: the coexistence of strong and weak magnetism in alternate atomic layers. The weak magnetism of Fe layers (disappearance of local magnetic moments at the Curie temperature) is responsible for a strong coupling with the crystal lattice while the strong magnetism in adjacent Mn-layers ensures Curie temperatures high enough to enable operation at and above room temperature. Varying the composition on these magnetic sublattices gives a handle to tune the working temperature and to achieve a strong reduction of the undesired thermal hysteresis. In this way we design novel materials based on abundantly available elements with properties matched to the requirements of an efficient refrigeration or energy-conversion cycle.
△ Less
Submitted 28 May, 2012; v1 submitted 2 March, 2012;
originally announced March 2012.
-
First principles modelling of magnesium titanium hydrides
Authors:
Süleyman Er,
Michiel J. van Setten,
Gilles A. de Wijs,
Geert Brocks
Abstract:
Mixing Mg with Ti leads to a hydride Mg(x)Ti(1-x)H2 with markedly improved (de)hydrogenation properties for x < 0.8, as compared to MgH2. Optically, thin films of Mg(x)Ti(1-x)H2 have a black appearance, which is remarkable for a hydride material. In this paper we study the structure and stability of Mg(x)Ti(1-x)H2, x= 0-1 by first-principles calculations at the level of density functional theory…
▽ More
Mixing Mg with Ti leads to a hydride Mg(x)Ti(1-x)H2 with markedly improved (de)hydrogenation properties for x < 0.8, as compared to MgH2. Optically, thin films of Mg(x)Ti(1-x)H2 have a black appearance, which is remarkable for a hydride material. In this paper we study the structure and stability of Mg(x)Ti(1-x)H2, x= 0-1 by first-principles calculations at the level of density functional theory. We give evidence for a fluorite to rutile phase transition at a critical composition x(c)= 0.8-0.9, which correlates with the experimentally observed sharp decrease in (de)hydrogenation rates at this composition. The densities of states of Mg(x)Ti(1-x)H2 have a peak at the Fermi level, composed of Ti d states. Disorder in the positions of the Ti atoms easily destroys the metallic plasma, however, which suppresses the optical reflection. Interband transitions result in a featureless optical absorption over a large energy range, causing the black appearance of Mg(x)Ti(1-x)H2.
△ Less
Submitted 6 October, 2009;
originally announced October 2009.
-
DFT Study of Planar Boron Sheets: A New Template for Hydrogen Storage
Authors:
Süleyman Er,
Gilles A. de Wijs,
Geert Brocks
Abstract:
We study the hydrogen storage properties of planar boron sheets and compare them to those of graphene. The binding of molecular hydrogen to the boron sheet (0.05 eV) is stronger than that to graphene. We find that dispersion of alkali metal (AM = Li, Na, and K) atoms onto the boron sheet markedly increases hydrogen binding energies and storage capacities. The unique structure of the boron sheet…
▽ More
We study the hydrogen storage properties of planar boron sheets and compare them to those of graphene. The binding of molecular hydrogen to the boron sheet (0.05 eV) is stronger than that to graphene. We find that dispersion of alkali metal (AM = Li, Na, and K) atoms onto the boron sheet markedly increases hydrogen binding energies and storage capacities. The unique structure of the boron sheet presents a template for creating a stable lattice of strongly bonded metal atoms with a large nearest neighbor distance. In contrast, AM atoms dispersed on graphene tend to cluster to form a bulk metal. In particular the boron-Li system is found to be a good candidate for hydrogen storage purposes. In the fully loaded case this compound can contain up to 10.7 wt. % molecular hydrogen with an average binding energy of 0.15 eV/H2.
△ Less
Submitted 6 October, 2009;
originally announced October 2009.
-
Hydrogen Storage by Polylithiated Molecules and Nanostructures
Authors:
Süleyman Er,
Gilles A. de Wijs,
Geert Brocks
Abstract:
We study polylithiated molecules as building blocks for hydrogen storage materials, using first-principles calculations. $\clifour$ and $\olitwo$ bind 12 and 10 hydrogen molecules, respectively, with an average binding energy of 0.10 and 0.13 eV, leading to gravimetric densities of 37.8 and 40.3 weight % H. Bonding between Li and C or O is strongly polar and $\hyd$ molecules attach to the partia…
▽ More
We study polylithiated molecules as building blocks for hydrogen storage materials, using first-principles calculations. $\clifour$ and $\olitwo$ bind 12 and 10 hydrogen molecules, respectively, with an average binding energy of 0.10 and 0.13 eV, leading to gravimetric densities of 37.8 and 40.3 weight % H. Bonding between Li and C or O is strongly polar and $\hyd$ molecules attach to the partially charged Li atoms without dissociating, which is favorable for (de)hydrogenation kinetics. CLi$_n$ and OLi$_m$ molecules can be chemically bonded to graphene sheets to hinder the aggregation of such molecules. In particular B or Be doped graphene strongly bind the molecules without seriously affecting the hydrogen binding energy. It still leads to a hydrogen storage capacity in the range 5-8.5 wt % H.
△ Less
Submitted 13 February, 2009;
originally announced February 2009.
-
Tunable Hydrogen Storage in Magnesium - Transition Metal Compounds
Authors:
Suleyman Er,
Dhirendra Tiwari,
Gilles A. de Wijs,
Geert Brocks
Abstract:
Magnesium dihydride ($\mgh$) stores 7.7 weight % hydrogen, but it suffers from a high thermodynamic stability and slow (de)hydrogenation kinetics. Alloying Mg with lightweight transition metals (TM = Sc, Ti, V, Cr) aims at improving the thermodynamic and kinetic properties. We study the structure and stability of Mg$_x$TM$_{1-x}$H$_2$ compounds, $x=[0$-1], by first-principles calculations at the…
▽ More
Magnesium dihydride ($\mgh$) stores 7.7 weight % hydrogen, but it suffers from a high thermodynamic stability and slow (de)hydrogenation kinetics. Alloying Mg with lightweight transition metals (TM = Sc, Ti, V, Cr) aims at improving the thermodynamic and kinetic properties. We study the structure and stability of Mg$_x$TM$_{1-x}$H$_2$ compounds, $x=[0$-1], by first-principles calculations at the level of density functional theory. We find that the experimentally observed sharp decrease in hydrogenation rates for $x\gtrsim0.8$ correlates with a phase transition of Mg$_x$TM$_{1-x}$H$_2$ from a fluorite to a rutile phase. The stability of these compounds decreases along the series Sc, Ti, V, Cr. Varying the transition metal (TM) and the composition $x$, the formation enthalpy of Mg$_x$TM$_{1-x}$H$_2$ can be tuned over the substantial range 0-2 eV/f.u. Assuming however that the alloy Mg$_x$TM$_{1-x}$ does not decompose upon dehydrogenation, the enthalpy associated with reversible hydrogenation of compounds with a high magnesium content ($x=0.75$) is close to that of pure Mg.
△ Less
Submitted 13 October, 2008;
originally announced October 2008.
-
First-principles study of the optical properties of MgxTi(1-x)H2
Authors:
M. J. van Setten,
S. Er,
G. Brocks,
R. A. de Groot,
G. A. de Wijs
Abstract:
The optical and electronic properties of Mg-Ti hydrides are studied using first-principles density functional theory. Dielectric functions are calculated for MgxTi(1-x)H2 with compositions x = 0.5, 0.75, and 0.875. The structure is that of fluorite TiH2 where both Mg and Ti atoms reside at the Ti positions of the lattice. In order to assess the effect of randomness in the Mg and Ti occupations w…
▽ More
The optical and electronic properties of Mg-Ti hydrides are studied using first-principles density functional theory. Dielectric functions are calculated for MgxTi(1-x)H2 with compositions x = 0.5, 0.75, and 0.875. The structure is that of fluorite TiH2 where both Mg and Ti atoms reside at the Ti positions of the lattice. In order to assess the effect of randomness in the Mg and Ti occupations we consider both highly ordered structures, modeled with simple unit cells of minimal size, and models of random alloys. These are simulated by super cells containing up to 64 formula units (Z = 64). All compositions and structural models turn out metallic, hence the dielectric functions contain interband and intraband free electron contributions. The former are calculated in the independent particle random phase approximation. The latter are modeled based upon the intraband plasma frequencies, which are also calculated from first-principles. Only for the models of the random alloys we obtain a black state, i.e. low reflection and transmission in the energy range from 1 to 6 eV.
△ Less
Submitted 2 April, 2008;
originally announced April 2008.
-
Spin tunneling in junctions with disordered ferromagnets
Authors:
P. V. Paluskar,
J. J. Attema,
G. A. de Wijs,
S. Fiddy,
E. Snoeck,
J. T. Kohlhepp,
H. J. M. Swagten,
R. A. de Groot,
B. Koopmans
Abstract:
We provide compelling evidence to establish that, contrary to one's elementary guess, the tunneling spin polarization (TSP) of amorphous CoFeB is larger than that of highly textured fcc CoFeB. First principles atomic and electronic structure calculations reveal striking agreement between the measured TSP and the predicted s-electron spin polarization. Given the disordered structure of the ternar…
▽ More
We provide compelling evidence to establish that, contrary to one's elementary guess, the tunneling spin polarization (TSP) of amorphous CoFeB is larger than that of highly textured fcc CoFeB. First principles atomic and electronic structure calculations reveal striking agreement between the measured TSP and the predicted s-electron spin polarization. Given the disordered structure of the ternary alloy, not only do these results strongly endorse our communal understanding of tunneling through AlOx, but they also portray the key concepts that demand primary consideration in such complex systems.
△ Less
Submitted 17 December, 2007;
originally announced December 2007.
-
A first-principles study of the electronic structure and stability of Be(BH4)2
Authors:
M. J. van Setten,
G. A. de Wijs,
G. Brocks
Abstract:
Alanates and boranates are studied intensively because of their potential use as hydrogen storage materials. In this paper we present a first-principles study of the electronic structure and the energetics of beryllium boranate, Be(BH4)2. From total energy calculations we show that - in contrast to the other boranates and alanates - hydrogen desorption directly to the elements is likely, and is…
▽ More
Alanates and boranates are studied intensively because of their potential use as hydrogen storage materials. In this paper we present a first-principles study of the electronic structure and the energetics of beryllium boranate, Be(BH4)2. From total energy calculations we show that - in contrast to the other boranates and alanates - hydrogen desorption directly to the elements is likely, and is at least competitive with desorption to the elemental hydride (BeH2). The formation enthalpy of Be(BH4)2 is only -0.12 eV/H2 (at T=0K). This low value can be rationalized by the participation of all atoms in the covalent bonding, in contrast to the ionic bonding observed in other boranates. From calculations of thermodynamic properties at finite temperature we estimate a decomposition temperature of 162 K at a pressure of 1 bar.
△ Less
Submitted 6 December, 2007;
originally announced December 2007.
-
Ab initio study on the effects of transition metal doping of Mg2NiH4
Authors:
M. J. van Setten,
G. A. de Wijs,
G. Brocks
Abstract:
Mg2NiH4 is a promising hydrogen storage material with fast (de)hydrogenation kinetics. Its hydrogen desorption enthalpy, however, is too large for practical applications. In this paper we study the effects of transition metal doping by first-principles density functional theory calculations. We show that the hydrogen desorption enthalpy can be reduced by ~0.1 eV/H2 if one in eight Ni atoms is re…
▽ More
Mg2NiH4 is a promising hydrogen storage material with fast (de)hydrogenation kinetics. Its hydrogen desorption enthalpy, however, is too large for practical applications. In this paper we study the effects of transition metal doping by first-principles density functional theory calculations. We show that the hydrogen desorption enthalpy can be reduced by ~0.1 eV/H2 if one in eight Ni atoms is replaced by Cu or Fe. Replacing Ni by Co atoms, however, increases the hydrogen desorption enthalpy. We study the thermodynamic stability of the dopants in the hydrogenated and dehydrogenated phases. Doping with Co or Cu leads to marginally stable compounds, whereas doping with Fe leads to an unstable compound. The optical response of Mg2NiH4 is also substantially affected by doping. The optical gap in Mg2NiH4 is ~1.7 eV. Doping with Co, Fe or Cu leads to impurity bands that reduce the optical gap by up to 0.5 eV.
△ Less
Submitted 21 March, 2007;
originally announced March 2007.
-
A model for the formation energies of alanates and boranates
Authors:
M. J. van Setten,
G. A. de Wijs,
G. Brocks
Abstract:
We develop a simple model for the formation energies (FEs) of alkali and lkaline earth alanates and boranates, based upon ionic bonding between metal cations and (AlH4)- or (BH4)- anions. The FEs agree well with values obtained from first principles calculations and with experimental FEs. The model shows that details of the crystal structure are relatively unimportant. The small size of the (BH4…
▽ More
We develop a simple model for the formation energies (FEs) of alkali and lkaline earth alanates and boranates, based upon ionic bonding between metal cations and (AlH4)- or (BH4)- anions. The FEs agree well with values obtained from first principles calculations and with experimental FEs. The model shows that details of the crystal structure are relatively unimportant. The small size of the (BH4)- anion causes a strong bonding in the crystal, which makes boranates more stable than alanates. Smaller alkali or alkaline earth cations do not give an increased FE. They involve a larger ionization potential that compensates for the increased crystal bonding.
△ Less
Submitted 27 November, 2006;
originally announced November 2006.
-
Electronic structure and optical properties of lightweight metal hydrides
Authors:
M. J. van Setten,
V. A. Popa,
G. A. de Wijs,
G. Brocks
Abstract:
We study the electronic structures and dielectric functions of the simple hydrides LiH, NaH, MgH2 and AlH3, and the complex hydrides Li3AlH6, Na3AlH6, LiAlH4, NaAlH4 and Mg(AlH4)2, using first principles density functional theory and GW calculations. All these compounds are large gap insulators with GW single particle band gaps varying from 3.5 eV in AlH3 to 6.5 eV in the MAlH4 compounds. The va…
▽ More
We study the electronic structures and dielectric functions of the simple hydrides LiH, NaH, MgH2 and AlH3, and the complex hydrides Li3AlH6, Na3AlH6, LiAlH4, NaAlH4 and Mg(AlH4)2, using first principles density functional theory and GW calculations. All these compounds are large gap insulators with GW single particle band gaps varying from 3.5 eV in AlH3 to 6.5 eV in the MAlH4 compounds. The valence bands are dominated by the hydrogen atoms, whereas the conduction bands have mixed contributions from the hydrogens and the metal cations. The electronic structure of the aluminium compounds is determined mainly by aluminium hydride complexes and their mutual interactions. Despite considerable differences between the band structures and the band gaps of the various compounds, their optical responses are qualitatively similar. In most of the spectra the optical absorption rises sharply above 6 eV and has a strong peak around 8 eV. The quantitative differences in the optical spectra are interpreted in terms of the structure and the electronic structure of the compounds.
△ Less
Submitted 8 September, 2006;
originally announced September 2006.
-
Interrelation of work function and surface stability: the case of BaAl4
Authors:
M. A. Uijttewaal,
G. A. de Wijs,
R. A. de Groot,
R. Coehoorn,
V. van Elsbergen,
C. H. L. Weijtens
Abstract:
The relationship between the work function (Phi) and the surface stability of compounds is, to our knowledge, unknown, but very important for applications such as organic light-emitting diodes. This relation is studied using first-principles calculations on various surfaces of BaAl4. The most stable surface [Ba terminated (001)] has the lowest Phi (1.95 eV), which is lower than that of any eleme…
▽ More
The relationship between the work function (Phi) and the surface stability of compounds is, to our knowledge, unknown, but very important for applications such as organic light-emitting diodes. This relation is studied using first-principles calculations on various surfaces of BaAl4. The most stable surface [Ba terminated (001)] has the lowest Phi (1.95 eV), which is lower than that of any elemental metal including Ba. Adding barium to this surface neither increases its stability nor lowers its work function. BaAl4 is also strongly bound. These results run counter to the common perception that stability and a low Phi are incompatible. Furthermore, a large anisotropy and a stable low-work-function surface are predicted for intermetallic compounds with polar surfaces.
△ Less
Submitted 25 May, 2005;
originally announced May 2005.
-
Ab initio study of magnesium alanate, Mg(AlH4)2
Authors:
M. J. van Setten,
G. A. de Wijs,
V. A. Popa,
G. Brocks
Abstract:
Magnesium alanate Mg(AlH4)2 has recently raised interest as a potential material for hydrogen storage. We apply ab initio calculations to characterize structural, electronic and energetic properties of Mg(AlH4)2. Density functional theory calculations within the generalized gradient approximation (GGA) are used to optimize the geometry and obtain the electronic structure. The latter is also stud…
▽ More
Magnesium alanate Mg(AlH4)2 has recently raised interest as a potential material for hydrogen storage. We apply ab initio calculations to characterize structural, electronic and energetic properties of Mg(AlH4)2. Density functional theory calculations within the generalized gradient approximation (GGA) are used to optimize the geometry and obtain the electronic structure. The latter is also studied by quasi-particle calculations at the GW level. Mg(AlH4)2 is a large band gap insulator with a fundamental band gap of 6.5 eV. The hydrogen atoms are bonded in AlH4 complexes, whose states dominate both the valence and the conduction bands. On the basis of total energies, the formation enthalpy of Mg(AlH4)2 with respect to bulk magnesium, bulk aluminum and hydrogen gas is 0.17 eV/H2 (at T = 0). Including corrections due to the zero point vibrations of the hydrogen atoms this number decreases to 0.10 eV/H2. The enthalpy of the dehydrogenation reaction Mg(AlH4)2 -> MgH2 +2Al+3H2(g) is close to zero, which impairs the potential usefulness of magnesium alanate as a hydrogen storage material.
△ Less
Submitted 25 May, 2005;
originally announced May 2005.
-
Tunable spin transport in CrAs: role of correlation effects
Authors:
L. Chioncel,
M. I. Katsnelson,
G. A. de Wijs,
R. A. de Groot,
A. I. Lichtenstein
Abstract:
Correlation effects on the electronic structure of half-metallic CrAs in zinc-blende structure are studied for different substrate lattice constants. Depending on the substrate the spectral weight of the non-quasiparticle states might be tuned from a well developed value in the case of InAs substrate to an almost negligible contribution for the GaAs one. A piezoelectric material that would allow…
▽ More
Correlation effects on the electronic structure of half-metallic CrAs in zinc-blende structure are studied for different substrate lattice constants. Depending on the substrate the spectral weight of the non-quasiparticle states might be tuned from a well developed value in the case of InAs substrate to an almost negligible contribution for the GaAs one. A piezoelectric material that would allow the change in the substrate lattice parameters opens the possibility for practical investigations of the switchable (tunable) non-quasiparticle states. Since the latter are important for the tunneling magnetoresistance and related phenomena it creates new opportunities in spintronics.
△ Less
Submitted 12 January, 2005;
originally announced January 2005.
-
Low work function of the (1000) Ca2N surface
Authors:
M. A. Uijttewaal,
G. A. de Wijs,
R. A. de Groot
Abstract:
Polymer diodes require cathodes that do not corrode the polymer but do have low work function to minimize the electron injection barrier. First-principles calculations demonstrate that the work function of the (1000) surface of the compound Ca2N is half an eV lower than that of the elemental metal Ca (2.35 vs. 2.87 eV). Moreover its reactivity is expected to be smaller. This makes Ca2N an intere…
▽ More
Polymer diodes require cathodes that do not corrode the polymer but do have low work function to minimize the electron injection barrier. First-principles calculations demonstrate that the work function of the (1000) surface of the compound Ca2N is half an eV lower than that of the elemental metal Ca (2.35 vs. 2.87 eV). Moreover its reactivity is expected to be smaller. This makes Ca2N an interesting candidate to replace calcium as cathode material for polymer light emitting diode devices.
△ Less
Submitted 17 May, 2004; v1 submitted 6 November, 2003;
originally announced November 2003.
-
Anisotropy of the Mobility of Pentacene from Frustration
Authors:
Gilles A. de Wijs,
Christine C. Mattheus,
Robert A. de Groot,
Thomas T. M. Palstra
Abstract:
The bandstructure of pentacene is calculated using first-principles density functional theory. A large anisotropy of the hole and electron effective masses within the molecular planes is found. The band dispersion of the HOMO and the LUMO is analyzed with the help of a tight-binding fit. The anisotropy is shown to be intimately related to the herringbone structure.
The bandstructure of pentacene is calculated using first-principles density functional theory. A large anisotropy of the hole and electron effective masses within the molecular planes is found. The band dispersion of the HOMO and the LUMO is analyzed with the help of a tight-binding fit. The anisotropy is shown to be intimately related to the herringbone structure.
△ Less
Submitted 7 January, 2003;
originally announced January 2003.
