Showing 1–50 of 376 results for author: Williams, S

Search for gravitational waves emitted from SN 2023ixf

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, A. G. Abac, R. Abbott, I. Abouelfettouh, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, D. Agarwal, M. Agathos, M. Aghaei Abchouyeh, O. D. Aguiar, I. Aguilar, L. Aiello, A. Ain, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Al-Jodah, C. Alléné, A. Allocca , et al. (1758 additional authors not shown)

Abstract: We present the results of a search for gravitational-wave transients associated with core-collapse supernova SN 2023ixf, which was observed in the galaxy Messier 101 via optical emission on 2023 May 19th, during the LIGO-Virgo-KAGRA 15th Engineering Run. We define a five-day on-source window during which an accompanying gravitational-wave signal may have occurred. No gravitational waves have been… ▽ More We present the results of a search for gravitational-wave transients associated with core-collapse supernova SN 2023ixf, which was observed in the galaxy Messier 101 via optical emission on 2023 May 19th, during the LIGO-Virgo-KAGRA 15th Engineering Run. We define a five-day on-source window during which an accompanying gravitational-wave signal may have occurred. No gravitational waves have been identified in data when at least two gravitational-wave observatories were operating, which covered $\sim 14\%$ of this five-day window. We report the search detection efficiency for various possible gravitational-wave emission models. Considering the distance to M101 (6.7 Mpc), we derive constraints on the gravitational-wave emission mechanism of core-collapse supernovae across a broad frequency spectrum, ranging from 50 Hz to 2 kHz where we assume the GW emission occurred when coincident data are available in the on-source window. Considering an ellipsoid model for a rotating proto-neutron star, our search is sensitive to gravitational-wave energy $1 \times 10^{-5} M_{\odot} c^2$ and luminosity $4 \times 10^{-5} M_{\odot} c^2/\text{s}$ for a source emitting at 50 Hz. These constraints are around an order of magnitude more stringent than those obtained so far with gravitational-wave data. The constraint on the ellipticity of the proto-neutron star that is formed is as low as $1.04$, at frequencies above $1200$ Hz, surpassing results from SN 2019ejj. △ Less

Submitted 21 October, 2024; originally announced October 2024.

Comments: Main paper: 6 pages, 4 figures and 1 table. Total with appendices: 20 pages, 4 figures, and 1 table

Report number: LIGO-P2400125

A search using GEO600 for gravitational waves coincident with fast radio bursts from SGR 1935+2154

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, A. G. Abac, R. Abbott, I. Abouelfettouh, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, D. Agarwal, M. Agathos, M. Aghaei Abchouyeh, O. D. Aguiar, I. Aguilar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Al-Jodah, C. Alléné , et al. (1758 additional authors not shown)

Abstract: The magnetar SGR 1935+2154 is the only known Galactic source of fast radio bursts (FRBs). FRBs from SGR 1935+2154 were first detected by CHIME/FRB and STARE2 in 2020 April, after the conclusion of the LIGO, Virgo, and KAGRA Collaborations' O3 observing run. Here we analyze four periods of gravitational wave (GW) data from the GEO600 detector coincident with four periods of FRB activity detected by… ▽ More The magnetar SGR 1935+2154 is the only known Galactic source of fast radio bursts (FRBs). FRBs from SGR 1935+2154 were first detected by CHIME/FRB and STARE2 in 2020 April, after the conclusion of the LIGO, Virgo, and KAGRA Collaborations' O3 observing run. Here we analyze four periods of gravitational wave (GW) data from the GEO600 detector coincident with four periods of FRB activity detected by CHIME/FRB, as well as X-ray glitches and X-ray bursts detected by NICER and NuSTAR close to the time of one of the FRBs. We do not detect any significant GW emission from any of the events. Instead, using a short-duration GW search (for bursts $\leq$ 1 s) we derive 50\% (90\%) upper limits of $10^{48}$ ($10^{49}$) erg for GWs at 300 Hz and $10^{49}$ ($10^{50}$) erg at 2 kHz, and constrain the GW-to-radio energy ratio to $\leq 10^{14} - 10^{16}$. We also derive upper limits from a long-duration search for bursts with durations between 1 and 10 s. These represent the strictest upper limits on concurrent GW emission from FRBs. △ Less

Submitted 11 October, 2024; originally announced October 2024.

Comments: 15 pages of text including references, 4 figures, 5 tables

Report number: LIGO-P2400192

Comprehensive Performance Modeling and System Design Insights for Foundation Models

Authors: Shashank Subramanian, Ermal Rrapaj, Peter Harrington, Smeet Chheda, Steven Farrell, Brian Austin, Samuel Williams, Nicholas Wright, Wahid Bhimji

Abstract: Generative AI, in particular large transformer models, are increasingly driving HPC system design in science and industry. We analyze performance characteristics of such transformer models and discuss their sensitivity to the transformer type, parallelization strategy, and HPC system features (accelerators and interconnects). We utilize a performance model that allows us to explore this complex de… ▽ More Generative AI, in particular large transformer models, are increasingly driving HPC system design in science and industry. We analyze performance characteristics of such transformer models and discuss their sensitivity to the transformer type, parallelization strategy, and HPC system features (accelerators and interconnects). We utilize a performance model that allows us to explore this complex design space and highlight its key components. We find that different transformer types demand different parallelism and system characteristics at different training regimes. Large Language Models are performant with 3D parallelism and amplify network needs only at pre-training scales with reduced dependence on accelerator capacity and bandwidth. On the other hand, long-sequence transformers, representative of scientific foundation models, place a more uniform dependence on network and capacity with necessary 4D parallelism. Our analysis emphasizes the need for closer performance modeling of different transformer types keeping system features in mind and demonstrates a path towards this. Our code is available as open-source. △ Less

Submitted 30 September, 2024; originally announced October 2024.

Comments: 17 pages, PMBS 2024

Fullerene-encapsulated Cyclic Ozone for the Next Generation of Nano-sized Propellants via Quantum Computation

Authors: Thomas W. Watts, Matthew Otten, Jason T. Necaise, Nam Nguyen, Benjamin Link, Kristen S. Williams, Yuval R. Sanders, Samuel J. Elman, Maria Kieferova, Michael J. Bremner, Kaitlyn J. Morrell, Justin E. Elenewski, Samuel D. Johnson, Luke Mathieson, Kevin M. Obenland, Rashmi Sundareswara, Adam Holmes

Abstract: Cyclic ozone additives have the potential to significantly increase the specific impulse of rocket fuel, which would lead to greater efficiency and reduced costs for space launches, allowing up to one third more payload per rocket. Although practical attempts to capture this isomer have not been successful, cyclic ozone might be stabilized within confined geometries. However, the required syntheti… ▽ More Cyclic ozone additives have the potential to significantly increase the specific impulse of rocket fuel, which would lead to greater efficiency and reduced costs for space launches, allowing up to one third more payload per rocket. Although practical attempts to capture this isomer have not been successful, cyclic ozone might be stabilized within confined geometries. However, the required synthetic methods are challenging to design and need theory-driven inputs that exceed the capabilities of classical methods. Quantum computation could enable these calculations, but the hardware requirements for many practical applications are still unclear. We provide a comprehensive analysis of how quantum methods could aid efforts to isolate cyclic ozone using fullerene encapsulation. Our discussion goes beyond formal complexity analysis, offering both logical and physical overhead estimates for determining ground state energies based on quantum phase estimation (QPE). Together, these data outline a plausible scale for realistic, computationally-assisted molecular design efforts using fault-tolerant quantum computation. △ Less

Submitted 23 August, 2024; originally announced August 2024.

Eight New Substellar Hyades Candidates from the UKIRT Hemisphere Survey

Authors: Adam C. Schneider, Michael C. Cushing, Robert A. Stiller, Jeffrey A. Munn, Frederick J. Vrba, Justice Bruursema, Stephen J. Williams, Michael C. Liu, Alexia Bravo, Jacqueline K. Faherty, Austin Rothermich, Emily Calamari, Dan Caselden, Martin Kabatnik, Arttu Sainio, Thomas P. Bickle, William Pendrill, Nikolaj Stevnbak Andersen, Melina Thevenot

Abstract: We have used the UKIRT Hemisphere Survey (UHS) combined with the UKIDSS Galactic Cluster Survey (GCS), the UKIDSS Galactic Plane Survey (GPS), and the CatWISE2020 catalog to search for new substellar members of the nearest open cluster to the Sun, the Hyades. Eight new substellar Hyades candidate members were identified and observed with the Gemini/GNIRS near-infrared spectrograph. All eight objec… ▽ More We have used the UKIRT Hemisphere Survey (UHS) combined with the UKIDSS Galactic Cluster Survey (GCS), the UKIDSS Galactic Plane Survey (GPS), and the CatWISE2020 catalog to search for new substellar members of the nearest open cluster to the Sun, the Hyades. Eight new substellar Hyades candidate members were identified and observed with the Gemini/GNIRS near-infrared spectrograph. All eight objects are confirmed as brown dwarfs with spectral types ranging from L6 to T5, with two objects showing signs of spectral binarity and/or variability. A kinematic analysis demonstrates that all eight new discoveries likely belong to the Hyades cluster, with future radial velocity and parallax measurements needed to confirm their membership. CWISE J042356.23$+$130414.3, with a spectral type of T5, would be the coldest ($T_{\rm eff}$$\approx$1100 K) and lowest-mass ($M$$\approx$30 $M_{\rm Jup}$) free-floating member of the Hyades yet discovered. We further find that high-probability substellar Hyades members from this work and previous studies have redder near-infrared colors than field-age brown dwarfs, potentially due to lower surface gravities and super-solar metallicities. △ Less

Submitted 19 August, 2024; originally announced August 2024.

Comments: Accepted to AJ

Improved 3D Whole Heart Geometry from Sparse CMR Slices

Authors: Yiyang Xu, Hao Xu, Matthew Sinclair, Esther Puyol-Antón, Steven A Niederer, Amedeo Chiribiri, Steven E Williams, Michelle C Williams, Alistair A Young

Abstract: Cardiac magnetic resonance (CMR) imaging and computed tomography (CT) are two common non-invasive imaging methods for assessing patients with cardiovascular disease. CMR typically acquires multiple sparse 2D slices, with unavoidable respiratory motion artefacts between slices, whereas CT acquires isotropic dense data but uses ionising radiation. In this study, we explore the combination of Slice S… ▽ More Cardiac magnetic resonance (CMR) imaging and computed tomography (CT) are two common non-invasive imaging methods for assessing patients with cardiovascular disease. CMR typically acquires multiple sparse 2D slices, with unavoidable respiratory motion artefacts between slices, whereas CT acquires isotropic dense data but uses ionising radiation. In this study, we explore the combination of Slice Shifting Algorithm (SSA), Spatial Transformer Network (STN), and Label Transformer Network (LTN) to: 1) correct respiratory motion between segmented slices, and 2) transform sparse segmentation data into dense segmentation. All combinations were validated using synthetic motion-corrupted CMR slice segmentation generated from CT in 1699 cases, where the dense CT serves as the ground truth. In 199 testing cases, SSA-LTN achieved the best results for Dice score and Huasdorff distance (94.0% and 4.7 mm respectively, average over 5 labels) but gave topological errors in 8 cases. STN was effective as a plug-in tool for correcting all topological errors with minimal impact on overall performance (93.5% and 5.0 mm respectively). SSA also proves to be a valuable plug-in tool, enhancing performance over both STN-based and LTN-based models. The code for these different combinations is available at https://github.com/XESchong/STACOM2024. △ Less

Submitted 14 August, 2024; originally announced August 2024.

Comments: 13 pages, STACOM2024

First results on new helium based eco-gas mixtures for the Extreme Energy Events Project

Authors: M. Abbrescia, C. Avanzini, L. Baldini, R. Baldini Ferroli, G. Batignani, M. Battaglieri, S. Boi, E. Bossini, F. Carnesecchi, F. Cavazza, C. Cicalò, L. Cifarelli, F. Coccetti, E. Coccia, A. Corvaglia, D. De Gruttola, S. De Pasquale, L. Galante, M. Garbini, I. Gnesi, F. Gramegna, S. Grazzi, D. Hatzifotiadou, P. La Rocca, Z. Liu , et al. (36 additional authors not shown)

Abstract: The Extreme Energy Events (EEE) Project, a joint project of the Centro Fermi (Museo Storico della Fisica e Centro Studi e Ricerche "E.Fermi") and INFN, has a dual purpose: a scientific research program on cosmic rays at ground level and an intense outreach and educational program. The project consists in a network of about 60 tracking detectors, called telescopes, mostly hosted in Italian High Sch… ▽ More The Extreme Energy Events (EEE) Project, a joint project of the Centro Fermi (Museo Storico della Fisica e Centro Studi e Ricerche "E.Fermi") and INFN, has a dual purpose: a scientific research program on cosmic rays at ground level and an intense outreach and educational program. The project consists in a network of about 60 tracking detectors, called telescopes, mostly hosted in Italian High Schools. Each telescope is made by three Multigap Resistive Plate Chambers, operated so far with a gas mixture composed by 98% C$_2$H$_2$F$_4$ and 2% SF$_6$. Due to its high Global Warming Potential, a few years ago the EEE collaboration has started an extensive R&D on alternative mixtures environmentally sustainable and compatible with the current experimental setup and operational environment. Among other gas mixtures, the one with helium and hydrofluoroolefin R1234ze gave the best result during the preliminary tests performed with two of the network telescopes. The detector has proved to reach performance levels comparable to those obtained with previous mixtures, without any modification of the hardware. We will discuss the first results obtained with the new mixture, tested with different percentages of the two components. △ Less

Submitted 28 September, 2024; v1 submitted 3 August, 2024; originally announced August 2024.

Comments: 14 pages, 6 figures, submitted to JINST

Enhancing Quantum Field Theory Simulations on NISQ Devices with Hamiltonian Truncation

Authors: James Ingoldby, Michael Spannowsky, Timur Sypchenko, Simon Williams

Abstract: Quantum computers can efficiently simulate highly entangled quantum systems, offering a solution to challenges facing classical simulation of Quantum Field Theories (QFTs). This paper presents an alternative to traditional methods for simulating the real-time evolution in QFTs by leveraging Hamiltonian Truncation (HT). As a use case, we study the Schwinger model, systematically reducing the comple… ▽ More Quantum computers can efficiently simulate highly entangled quantum systems, offering a solution to challenges facing classical simulation of Quantum Field Theories (QFTs). This paper presents an alternative to traditional methods for simulating the real-time evolution in QFTs by leveraging Hamiltonian Truncation (HT). As a use case, we study the Schwinger model, systematically reducing the complexity of the Hamiltonian via HT while preserving essential physical properties. For the observables studied in this paper, the HT approach converges quickly with the number of qubits, allowing for the interesting physics processes to be captured without needing many qubits. Identifying the truncated free Hamiltonian's eigenbasis with the quantum device's computational basis avoids the need for complicated and costly state preparation routines, reducing the algorithm's overall circuit depth and required coherence time. As a result, the HT approach to simulating QFTs on a quantum device is well suited to Noisy-Intermediate Scale Quantum (NISQ) devices, which have a limited number of qubits and short coherence times. We validate our approach by running simulations on a NISQ device, showcasing strong agreement with theoretical predictions. We highlight the potential of HT for simulating QFTs on quantum hardware. △ Less

Submitted 26 July, 2024; originally announced July 2024.

Comments: 18 pages, 4 figures

Report number: IPPP/24/37

SKAO Observation Execution Tool: Designing for concurrent, responsive observations

Authors: Viivi Pursiainen, Stewart J. Williams, Thaddeus Kenny, Elizabeth S. Bartlett, Andrew D. Biggs, Brendan McCollam, Danilo Acosta, Sean Ellis, Rupert Lung

Abstract: The SKA Observatory, currently in the construction phase, will have two of the world's largest radio telescopes when completed in 2028. The scale of the project introduces unique challenges for the telescope software design and implementation at all levels, from user interfacing software down to the lower-level control of individual telescope elements. The Observation Execution Tool (OET) is part… ▽ More The SKA Observatory, currently in the construction phase, will have two of the world's largest radio telescopes when completed in 2028. The scale of the project introduces unique challenges for the telescope software design and implementation at all levels, from user interfacing software down to the lower-level control of individual telescope elements. The Observation Execution Tool (OET) is part of the Observation Science Operations (OSO) suite of applications and is responsible for orchestrating the highest level of telescope control through the execution of telescope control scripts. One of the main challenges for the OET is creating a design that can robustly run concurrent observations on multiple subarrays while remaining responsive to the user. The Scaled Agile Framework (SAFe) development process followed by the SKA project also means the software should be allow to iterative implementation and easily accommodate new and changing requirements. This paper concentrates on the design decisions and challenges in the development of the OET, how we have solved some of the specific technical problems and details on how we remain flexible for future requirements. △ Less

Submitted 24 July, 2024; originally announced July 2024.

Comments: 6 pages, 2 figures, submitted to 2024 SPIE Astronomical Telescopes + Instrumentation, Software and Cyberinfrastructure for Astronomy VIII conference

Development of the observatory software for the SKAO

Authors: Thaddeus Kenny, Stewart J. Williams, Viivi Pursiainen, Elizabeth S. Bartlett, Brendan McCollam, Andrew D. Biggs, Sean Ellis, Rupert Lung

Abstract: The Observatory Science Operations (OSO) subsystem of the SKAO consists of a range of complex tools which will be used to propose, design, schedule and execute observations. Bridging the gap between the science and telescope domains is the key responsibility of OSO, requiring considerations of usability, performance, availability and accessibility, amongst others. This paper describes the state of… ▽ More The Observatory Science Operations (OSO) subsystem of the SKAO consists of a range of complex tools which will be used to propose, design, schedule and execute observations. Bridging the gap between the science and telescope domains is the key responsibility of OSO, requiring considerations of usability, performance, availability and accessibility, amongst others. This paper describes the state of the observatory software as we approach construction milestones, how the applications meet these requirements using a modern technology architecture, and challenges so far. △ Less

Submitted 24 July, 2024; originally announced July 2024.

Swift-BAT GUANO follow-up of gravitational-wave triggers in the third LIGO-Virgo-KAGRA observing run

Authors: Gayathri Raman, Samuele Ronchini, James Delaunay, Aaron Tohuvavohu, Jamie A. Kennea, Tyler Parsotan, Elena Ambrosi, Maria Grazia Bernardini, Sergio Campana, Giancarlo Cusumano, Antonino D'Ai, Paolo D'Avanzo, Valerio D'Elia, Massimiliano De Pasquale, Simone Dichiara, Phil Evans, Dieter Hartmann, Paul Kuin, Andrea Melandri, Paul O'Brien, Julian P. Osborne, Kim Page, David M. Palmer, Boris Sbarufatti, Gianpiero Tagliaferri , et al. (1797 additional authors not shown)

Abstract: We present results from a search for X-ray/gamma-ray counterparts of gravitational-wave (GW) candidates from the third observing run (O3) of the LIGO-Virgo-KAGRA (LVK) network using the Swift Burst Alert Telescope (Swift-BAT). The search includes 636 GW candidates received in low latency, 86 of which have been confirmed by the offline analysis and included in the third cumulative Gravitational-Wav… ▽ More We present results from a search for X-ray/gamma-ray counterparts of gravitational-wave (GW) candidates from the third observing run (O3) of the LIGO-Virgo-KAGRA (LVK) network using the Swift Burst Alert Telescope (Swift-BAT). The search includes 636 GW candidates received in low latency, 86 of which have been confirmed by the offline analysis and included in the third cumulative Gravitational-Wave Transient Catalogs (GWTC-3). Targeted searches were carried out on the entire GW sample using the maximum--likelihood NITRATES pipeline on the BAT data made available via the GUANO infrastructure. We do not detect any significant electromagnetic emission that is temporally and spatially coincident with any of the GW candidates. We report flux upper limits in the 15-350 keV band as a function of sky position for all the catalog candidates. For GW candidates where the Swift-BAT false alarm rate is less than 10$^{-3}$ Hz, we compute the GW--BAT joint false alarm rate. Finally, the derived Swift-BAT upper limits are used to infer constraints on the putative electromagnetic emission associated with binary black hole mergers. △ Less

Submitted 13 July, 2024; originally announced July 2024.

Comments: 50 pages, 10 figures, 4 tables

Raply: A profanity-mitigated rap generator

Authors: Omar Manil Bendali, Samir Ferroum, Ekaterina Kozachenko, Youssef Parviz, Hanna Shcharbakova, Anna Tokareva, Shemair Williams

Abstract: The task of writing rap is challenging and involves producing complex rhyming schemes, yet meaningful lyrics. In this work, we propose Raply, a fine-tuned GPT-2 model capable of producing meaningful rhyming text in the style of rap. In addition to its rhyming capabilities, the model is able to generate less offensive content. It was achieved through the fine-tuning the model on a new dataset Mitis… ▽ More The task of writing rap is challenging and involves producing complex rhyming schemes, yet meaningful lyrics. In this work, we propose Raply, a fine-tuned GPT-2 model capable of producing meaningful rhyming text in the style of rap. In addition to its rhyming capabilities, the model is able to generate less offensive content. It was achieved through the fine-tuning the model on a new dataset Mitislurs, a profanity-mitigated corpus. We evaluate the output of the model on two criteria: 1) rhyming based on the rhyme density metric; 2) profanity content, using the list of profanities for the English language. To our knowledge, this is the first attempt at profanity mitigation for rap lyrics generation. △ Less

Submitted 9 July, 2024; originally announced July 2024.

Quantum computing for corrosion-resistant materials and anti-corrosive coatings design

Authors: Nam Nguyen, Thomas W. Watts, Benjamin Link, Kristen S. Williams, Yuval R. Sanders, Samuel J. Elman, Maria Kieferova, Michael J. Bremner, Kaitlyn J. Morrell, Justin Elenewski, Eric B. Isaacs, Samuel D. Johnson, Luke Mathieson, Kevin M. Obenland, Matthew Otten, Rashmi Sundareswara, Adam Holmes

Abstract: Recent estimates indicate that the U.S. Department of Defense spends over \$20 billion USD annually on corrosion-related maintenance. This expenditure is accompanied by a substantial loss in asset readiness, ranging from 10% to 30%. Moreover, the global costs associated with corrosion damage have been estimated at an astonishing \$2.5 trillion USD per year, or approximately 3.4% of global GDP in 2… ▽ More Recent estimates indicate that the U.S. Department of Defense spends over \$20 billion USD annually on corrosion-related maintenance. This expenditure is accompanied by a substantial loss in asset readiness, ranging from 10% to 30%. Moreover, the global costs associated with corrosion damage have been estimated at an astonishing \$2.5 trillion USD per year, or approximately 3.4% of global GDP in 2016. This project aims to describe how quantum computers might be leveraged to fundamentally change the way material-environment interactions are modeled for material discovery, selection, and design. This project also seeks to understand the plausibility and utility of replacing portions of classical computing workflows with algorithms optimized for quantum computing hardware. The utility of quantum computers is explored through the lens of two industrially relevant problems: (1) characterizing magnesium alloy corrosion properties in aqueous environments and (2) identifying stable niobium-rich alloys with corrosion resistance at temperatures above 1500K. This paper presents an end-to-end analysis of the complexity of both classical and quantum algorithms used in application workflows. Resource estimates are produced using a custom software package, pyLIQTR, based on the qubitized Quantum Phase Estimation (QPE) algorithm. Estimates for the two aforementioned applications show that industrially-relevant computational models that have the potential to deliver commercial utility require quantum computers with thousands to hundreds of thousands of logical qubits and the ability to execute $10^{13}$ to $10^{19}$ T-gates. These estimates represent an upper bound and motivate continued research into improved quantum algorithms and resource reduction techniques. △ Less

Submitted 26 June, 2024; originally announced June 2024.

LPSim: Large Scale Multi-GPU Parallel Computing based Regional Scale Traffic Simulation Framework

Authors: Xuan Jiang, Raja Sengupta, James Demmel, Samuel Williams

Abstract: Traffic propagation simulation is crucial for urban planning, enabling congestion analysis, travel time estimation, and route optimization. Traditional micro-simulation frameworks are limited to main roads due to the complexity of urban mobility and large-scale data. We introduce the Large Scale Multi-GPU Parallel Computing based Regional Scale Traffic Simulation Framework (LPSim), a scalable tool… ▽ More Traffic propagation simulation is crucial for urban planning, enabling congestion analysis, travel time estimation, and route optimization. Traditional micro-simulation frameworks are limited to main roads due to the complexity of urban mobility and large-scale data. We introduce the Large Scale Multi-GPU Parallel Computing based Regional Scale Traffic Simulation Framework (LPSim), a scalable tool that leverages GPU parallel computing to simulate extensive traffic networks with high fidelity and reduced computation time. LPSim performs millions of vehicle dynamics simulations simultaneously, outperforming CPU-based methods. It can complete simulations of 2.82 million trips in 6.28 minutes using a single GPU, and 9.01 million trips in 21.16 minutes on dual GPUs. LPSim is also tested on dual NVIDIA A100 GPUs, achieving simulations about 113 times faster than traditional CPU methods. This demonstrates its scalability and efficiency for large-scale applications, making LPSim a valuable resource for researchers and planners. Code: https://github.com/Xuan-1998/LPSim △ Less

Submitted 25 April, 2024; originally announced June 2024.

Detecting Endangered Marine Species in Autonomous Underwater Vehicle Imagery Using Point Annotations and Few-Shot Learning

Authors: Heather Doig, Oscar Pizarro, Jacquomo Monk, Stefan Williams

Abstract: One use of Autonomous Underwater Vehicles (AUVs) is the monitoring of habitats associated with threatened, endangered and protected marine species, such as the handfish of Tasmania, Australia. Seafloor imagery collected by AUVs can be used to identify individuals within their broader habitat context, but the sheer volume of imagery collected can overwhelm efforts to locate rare or cryptic individu… ▽ More One use of Autonomous Underwater Vehicles (AUVs) is the monitoring of habitats associated with threatened, endangered and protected marine species, such as the handfish of Tasmania, Australia. Seafloor imagery collected by AUVs can be used to identify individuals within their broader habitat context, but the sheer volume of imagery collected can overwhelm efforts to locate rare or cryptic individuals. Machine learning models can be used to identify the presence of a particular species in images using a trained object detector, but the lack of training examples reduces detection performance, particularly for rare species that may only have a small number of examples in the wild. In this paper, inspired by recent work in few-shot learning, images and annotations of common marine species are exploited to enhance the ability of the detector to identify rare and cryptic species. Annotated images of six common marine species are used in two ways. Firstly, the common species are used in a pre-training step to allow the backbone to create rich features for marine species. Secondly, a copy-paste operation is used with the common species images to augment the training data. While annotations for more common marine species are available in public datasets, they are often in point format, which is unsuitable for training an object detector. A popular semantic segmentation model efficiently generates bounding box annotations for training from the available point annotations. Our proposed framework is applied to AUV images of handfish, increasing average precision by up to 48\% compared to baseline object detection training. This approach can be applied to other objects with low numbers of annotations and promises to increase the ability to actively monitor threatened, endangered and protected species. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Comments: 7 pages, 5 figures. Submitted to the 2024 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2024)

Easy Problems That LLMs Get Wrong

Authors: Sean Williams, James Huckle

Abstract: We introduce a comprehensive Linguistic Benchmark designed to evaluate the limitations of Large Language Models (LLMs) in domains such as logical reasoning, spatial intelligence, and linguistic understanding, among others. Through a series of straightforward questions, it uncovers the significant limitations of well-regarded models to perform tasks that humans manage with ease. It also highlights… ▽ More We introduce a comprehensive Linguistic Benchmark designed to evaluate the limitations of Large Language Models (LLMs) in domains such as logical reasoning, spatial intelligence, and linguistic understanding, among others. Through a series of straightforward questions, it uncovers the significant limitations of well-regarded models to perform tasks that humans manage with ease. It also highlights the potential of prompt engineering to mitigate some errors and underscores the necessity for better training methodologies. Our findings stress the importance of grounding LLMs with human reasoning and common sense, emphasising the need for human-in-the-loop for enterprise applications. We hope this work paves the way for future research to enhance the usefulness and reliability of new models. △ Less

Submitted 31 May, 2024; v1 submitted 29 May, 2024; originally announced May 2024.

Comments: AutogenAI Ltd. GitHub Repo: https://github.com/autogenai/easy-problems-that-llms-get-wrong

Ballistic Energy Transport via Long Alkyl Chains: A New Initiation Mechanism

Authors: Sithara U. Nawagamuwage, Elliot S. Williams, Md Muhaiminul Islam, Igor V. Parshin, Alexander L. Burin, Nathalie Busschaert, Igor V. Rubtsov

Abstract: In an effort to increase the speed and efficiency of ballistic energy transport via oligomeric chains, we performed measurements of the transport in compounds featuring long alkyl chains of up to 37 methylene units. Compounds of the N3-(CH2)n-COOMe type (denoted as aznME) were synthesized with n = 5, 10, 15, 19, 28, 37 and studied using relaxation-assisted two-dimensional infrared spectroscopy. Th… ▽ More In an effort to increase the speed and efficiency of ballistic energy transport via oligomeric chains, we performed measurements of the transport in compounds featuring long alkyl chains of up to 37 methylene units. Compounds of the N3-(CH2)n-COOMe type (denoted as aznME) were synthesized with n = 5, 10, 15, 19, 28, 37 and studied using relaxation-assisted two-dimensional infrared spectroscopy. The speed of the ballistic transport, initiated by the N3 tag excitation, increased ca. 3-fold for the longer chains (n = 19-37) compared to the shorter chains, from 14.7 Å/ps to 48 Å/ps, in line with an earlier prediction (Nawagamuwage et al. 2021, J. Phys. Chem. B, 125, 7546). Modeling, based on solving numerically the Liouville equation, was capable of reproducing the experimental data only if three wavepackets are included, involving CH2 twisting (Tw), wagging (W), and rocking (Ro) chain bands. The approaches for designing molecular systems featuring higher speed and efficiency of energy transport are discussed. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Submitted to JPC

FTL: Transfer Learning Nonlinear Plasma Dynamic Transitions in Low Dimensional Embeddings via Deep Neural Networks

Authors: Zhe Bai, Xishuo Wei, William Tang, Leonid Oliker, Zhihong Lin, Samuel Williams

Abstract: Deep learning algorithms provide a new paradigm to study high-dimensional dynamical behaviors, such as those in fusion plasma systems. Development of novel model reduction methods, coupled with detection of abnormal modes with plasma physics, opens a unique opportunity for building efficient models to identify plasma instabilities for real-time control. Our Fusion Transfer Learning (FTL) model dem… ▽ More Deep learning algorithms provide a new paradigm to study high-dimensional dynamical behaviors, such as those in fusion plasma systems. Development of novel model reduction methods, coupled with detection of abnormal modes with plasma physics, opens a unique opportunity for building efficient models to identify plasma instabilities for real-time control. Our Fusion Transfer Learning (FTL) model demonstrates success in reconstructing nonlinear kink mode structures by learning from a limited amount of nonlinear simulation data. The knowledge transfer process leverages a pre-trained neural encoder-decoder network, initially trained on linear simulations, to effectively capture nonlinear dynamics. The low-dimensional embeddings extract the coherent structures of interest, while preserving the inherent dynamics of the complex system. Experimental results highlight FTL's capacity to capture transitional behaviors and dynamical features in plasma dynamics -- a task often challenging for conventional methods. The model developed in this study is generalizable and can be extended broadly through transfer learning to address various magnetohydrodynamics (MHD) modes. △ Less

Submitted 26 April, 2024; originally announced April 2024.

Comments: 18 pages, 10 figures

MSC Class: 76W05; 68T45 ACM Class: J.2; I.2.10

Observation of Gravitational Waves from the Coalescence of a $2.5\text{-}4.5~M_\odot$ Compact Object and a Neutron Star

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, A. G. Abac, R. Abbott, I. Abouelfettouh, F. Acernese, K. Ackley, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, D. Agarwal, M. Agathos, M. Aghaei Abchouyeh, O. D. Aguiar, I. Aguilar, L. Aiello, A. Ain, P. Ajith, S. Akçay, T. Akutsu, S. Albanesi, R. A. Alfaidi, A. Al-Jodah , et al. (1771 additional authors not shown)

Abstract: We report the observation of a coalescing compact binary with component masses $2.5\text{-}4.5~M_\odot$ and $1.2\text{-}2.0~M_\odot$ (all measurements quoted at the 90% credible level). The gravitational-wave signal GW230529_181500 was observed during the fourth observing run of the LIGO-Virgo-KAGRA detector network on 2023 May 29 by the LIGO Livingston Observatory. The primary component of the so… ▽ More We report the observation of a coalescing compact binary with component masses $2.5\text{-}4.5~M_\odot$ and $1.2\text{-}2.0~M_\odot$ (all measurements quoted at the 90% credible level). The gravitational-wave signal GW230529_181500 was observed during the fourth observing run of the LIGO-Virgo-KAGRA detector network on 2023 May 29 by the LIGO Livingston Observatory. The primary component of the source has a mass less than $5~M_\odot$ at 99% credibility. We cannot definitively determine from gravitational-wave data alone whether either component of the source is a neutron star or a black hole. However, given existing estimates of the maximum neutron star mass, we find the most probable interpretation of the source to be the coalescence of a neutron star with a black hole that has a mass between the most massive neutron stars and the least massive black holes observed in the Galaxy. We provisionally estimate a merger rate density of $55^{+127}_{-47}~\text{Gpc}^{-3}\,\text{yr}^{-1}$ for compact binary coalescences with properties similar to the source of GW230529_181500; assuming that the source is a neutron star-black hole merger, GW230529_181500-like sources constitute about 60% of the total merger rate inferred for neutron star-black hole coalescences. The discovery of this system implies an increase in the expected rate of neutron star-black hole mergers with electromagnetic counterparts and provides further evidence for compact objects existing within the purported lower mass gap. △ Less

Submitted 26 July, 2024; v1 submitted 5 April, 2024; originally announced April 2024.

Comments: 45 pages (10 pages author list, 13 pages main text, 1 page acknowledgements, 13 pages appendices, 8 pages bibliography), 17 figures, 16 tables. Update to match version published in The Astrophysical Journal Letters. Data products available from https://zenodo.org/records/10845779

Report number: LIGO-P2300352

Journal ref: ApJL 970, L34 (2024)

I Did Not Notice: A Comparison of Immersive Analytics with Augmented and Virtual Reality

Authors: Xiaoyan Zhou, Anil Ufuk Batmaz, Adam S. Williams, Dylan Schreiber, Francisco Ortega

Abstract: Immersive environments enable users to engage in embodied interaction, enhancing the sensemaking processes involved in completing tasks such as immersive analytics. Previous comparative studies on immersive analytics using augmented and virtual realities have revealed that users employ different strategies for data interpretation and text-based analytics depending on the environment. Our study see… ▽ More Immersive environments enable users to engage in embodied interaction, enhancing the sensemaking processes involved in completing tasks such as immersive analytics. Previous comparative studies on immersive analytics using augmented and virtual realities have revealed that users employ different strategies for data interpretation and text-based analytics depending on the environment. Our study seeks to investigate how augmented and virtual reality influences sensemaking processes in quantitative immersive analytics. Our results, derived from a diverse group of participants, indicate that users demonstrate comparable performance in both environments. However, it was observed that users exhibit a higher tolerance for cognitive load in VR and travel further in AR. Based on our findings, we recommend providing users with the option to switch between AR and VR, thereby enabling them to select an environment that aligns with their preferences and task requirements. △ Less

Submitted 4 April, 2024; originally announced April 2024.

A Non-Terminating Game of Beggar-My-Neighbor

Authors: Brayden Casella, Philip M. Anderson, Michael Kleber, Richard P. Mann, Reed Nessler, William Rucklidge, Samuel G. Williams, Nicolas Wu

Abstract: We demonstrate the existence of a non-terminating game of Beggar-My-Neighbor, discovered by lead author Brayden Casella. We detail the method for constructing this game and identify a cyclical structure of 62 tricks that is reached by 30 distinct starting hands. We further present a short history of the search for this solution since the problem was posed, and a record of previously found longest… ▽ More We demonstrate the existence of a non-terminating game of Beggar-My-Neighbor, discovered by lead author Brayden Casella. We detail the method for constructing this game and identify a cyclical structure of 62 tricks that is reached by 30 distinct starting hands. We further present a short history of the search for this solution since the problem was posed, and a record of previously found longest terminating games. The existence of this non-terminating game provides a solution to a long-standing question which John H. Conway called an `anti-Hilbert problem.' △ Less

Submitted 19 March, 2024; originally announced March 2024.

Simulating quantum field theories on continuous-variable quantum computers

Authors: Steven Abel, Michael Spannowsky, Simon Williams

Abstract: We delve into the use of photonic quantum computing to simulate quantum mechanics and extend its application towards quantum field theory. We develop and prove a method that leverages this form of Continuous-Variable Quantum Computing (CVQC) to reproduce the time evolution of quantum-mechanical states under arbitrary Hamiltonians, and we demonstrate the method's remarkable efficacy with various po… ▽ More We delve into the use of photonic quantum computing to simulate quantum mechanics and extend its application towards quantum field theory. We develop and prove a method that leverages this form of Continuous-Variable Quantum Computing (CVQC) to reproduce the time evolution of quantum-mechanical states under arbitrary Hamiltonians, and we demonstrate the method's remarkable efficacy with various potentials. Our method centres on constructing an evolver-state, a specially prepared quantum state that induces the desired time-evolution on the target state. This is achieved by introducing a non-Gaussian operation using a measurement-based quantum computing approach, enhanced by machine learning. Furthermore, we propose a framework in which these methods can be extended to encode field theories in CVQC without discretising the field values, thus preserving the continuous nature of the fields. This opens new avenues for quantum computing applications in quantum field theory. △ Less

Submitted 10 July, 2024; v1 submitted 15 March, 2024; originally announced March 2024.

Comments: 22 pages, 13 figures

Report number: IPPP/24/10

Journal ref: Phys. Rev. A 110 (2024) 1, 012607

Ultralight vector dark matter search using data from the KAGRA O3GK run

Authors: The LIGO Scientific Collaboration, the Virgo Collaboration, the KAGRA Collaboration, A. G. Abac, R. Abbott, H. Abe, I. Abouelfettouh, F. Acernese, K. Ackley, C. Adamcewicz, S. Adhicary, N. Adhikari, R. X. Adhikari, V. K. Adkins, V. B. Adya, C. Affeldt, D. Agarwal, M. Agathos, O. D. Aguiar, I. Aguilar, L. Aiello, A. Ain, P. Ajith, T. Akutsu, S. Albanesi , et al. (1778 additional authors not shown)

Abstract: Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we prese… ▽ More Among the various candidates for dark matter (DM), ultralight vector DM can be probed by laser interferometric gravitational wave detectors through the measurement of oscillating length changes in the arm cavities. In this context, KAGRA has a unique feature due to differing compositions of its mirrors, enhancing the signal of vector DM in the length change in the auxiliary channels. Here we present the result of a search for $U(1)_{B-L}$ gauge boson DM using the KAGRA data from auxiliary length channels during the first joint observation run together with GEO600. By applying our search pipeline, which takes into account the stochastic nature of ultralight DM, upper bounds on the coupling strength between the $U(1)_{B-L}$ gauge boson and ordinary matter are obtained for a range of DM masses. While our constraints are less stringent than those derived from previous experiments, this study demonstrates the applicability of our method to the lower-mass vector DM search, which is made difficult in this measurement by the short observation time compared to the auto-correlation time scale of DM. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 20 pages, 5 figures

Report number: LIGO-P2300250

Feature Alignment: Rethinking Efficient Active Learning via Proxy in the Context of Pre-trained Models

Authors: Ziting Wen, Oscar Pizarro, Stefan Williams

Abstract: Fine-tuning the pre-trained model with active learning holds promise for reducing annotation costs. However, this combination introduces significant computational costs, particularly with the growing scale of pre-trained models. Recent research has proposed proxy-based active learning, which pre-computes features to reduce computational costs. Yet, this approach often incurs a significant loss in… ▽ More Fine-tuning the pre-trained model with active learning holds promise for reducing annotation costs. However, this combination introduces significant computational costs, particularly with the growing scale of pre-trained models. Recent research has proposed proxy-based active learning, which pre-computes features to reduce computational costs. Yet, this approach often incurs a significant loss in active learning performance, which may even outweigh the computational cost savings. In this paper, we argue the performance drop stems not only from pre-computed features' inability to distinguish between categories of labeled samples, resulting in the selection of redundant samples but also from the tendency to compromise valuable pre-trained information when fine-tuning with samples selected through the proxy model. To address this issue, we propose a novel method called aligned selection via proxy to update pre-computed features while selecting a proper training method to inherit valuable pre-training information. Extensive experiments validate that our method significantly improves the total cost of efficient active learning while maintaining computational efficiency. △ Less

Submitted 2 March, 2024; originally announced March 2024.

Mitigating Distributional Shift in Semantic Segmentation via Uncertainty Estimation from Unlabelled Data

Authors: David S. W. Williams, Daniele De Martini, Matthew Gadd, Paul Newman

Abstract: Knowing when a trained segmentation model is encountering data that is different to its training data is important. Understanding and mitigating the effects of this play an important part in their application from a performance and assurance perspective - this being a safety concern in applications such as autonomous vehicles (AVs). This work presents a segmentation network that can detect errors… ▽ More Knowing when a trained segmentation model is encountering data that is different to its training data is important. Understanding and mitigating the effects of this play an important part in their application from a performance and assurance perspective - this being a safety concern in applications such as autonomous vehicles (AVs). This work presents a segmentation network that can detect errors caused by challenging test domains without any additional annotation in a single forward pass. As annotation costs limit the diversity of labelled datasets, we use easy-to-obtain, uncurated and unlabelled data to learn to perform uncertainty estimation by selectively enforcing consistency over data augmentation. To this end, a novel segmentation benchmark based on the SAX Dataset is used, which includes labelled test data spanning three autonomous-driving domains, ranging in appearance from dense urban to off-road. The proposed method, named Gamma-SSL, consistently outperforms uncertainty estimation and Out-of-Distribution (OoD) techniques on this difficult benchmark - by up to 10.7% in area under the receiver operating characteristic (ROC) curve and 19.2% in area under the precision-recall (PR) curve in the most challenging of the three scenarios. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Comments: Accepted for publication in IEEE Transactions on Robotics (T-RO)

Masked Gamma-SSL: Learning Uncertainty Estimation via Masked Image Modeling

Authors: David S. W. Williams, Matthew Gadd, Paul Newman, Daniele De Martini

Abstract: This work proposes a semantic segmentation network that produces high-quality uncertainty estimates in a single forward pass. We exploit general representations from foundation models and unlabelled datasets through a Masked Image Modeling (MIM) approach, which is robust to augmentation hyper-parameters and simpler than previous techniques. For neural networks used in safety-critical applications,… ▽ More This work proposes a semantic segmentation network that produces high-quality uncertainty estimates in a single forward pass. We exploit general representations from foundation models and unlabelled datasets through a Masked Image Modeling (MIM) approach, which is robust to augmentation hyper-parameters and simpler than previous techniques. For neural networks used in safety-critical applications, bias in the training data can lead to errors; therefore it is crucial to understand a network's limitations at run time and act accordingly. To this end, we test our proposed method on a number of test domains including the SAX Segmentation benchmark, which includes labelled test data from dense urban, rural and off-road driving domains. The proposed method consistently outperforms uncertainty estimation and Out-of-Distribution (OoD) techniques on this difficult benchmark. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Comments: Accepted for publication at 2024 IEEE International Conference on Robotics and Automation (ICRA)

Abrasion-fission reactions at intermediate energies

Authors: M. Bowry, O. B. Tarasov, J. S. Berryman, V. Bader, D. Bazin, T. Chupp, H. L. Crawford, A. Gade, E. Lunderberg, A. Ratkiewicz, F. Recchia, B. M. Sherrill, D. Smalley, A. Stolz, S. R. Stroberg, D. Weisshaar, S. Williams, K. Wimmer, J. Yurkon

Abstract: The availability of high-intensity, heavy-ion beams coupled to sensitive, large solid-angleacceptance spectrometers has enabled a detailed examination of the fission fragments produced in induced-fission reactions. The abrasion-fission process involves the formation of projectile-like prefragments in violent nuclear collisions at relative energies in excess of 100 MeV/u. At intermediate energies b… ▽ More The availability of high-intensity, heavy-ion beams coupled to sensitive, large solid-angleacceptance spectrometers has enabled a detailed examination of the fission fragments produced in induced-fission reactions. The abrasion-fission process involves the formation of projectile-like prefragments in violent nuclear collisions at relative energies in excess of 100 MeV/u. At intermediate energies below this threshold, experiments suggest a change in the prefragment kinematic qualities. Information regarding the influence of this transitional phase upon the evolution of nuclei approaching the point of scission is scarce. In this article, data are presented for over 200 nuclei from nickel to palladium produced in abrasion-fission reactions of a 80 MeV/u 238U beam. Cross sections were obtained following yield measurements performed for the principal charge states of the identified fission fragments and a detailed analysis of the ion transmission. A full kinematic analysis of the fission fragments has been performed using the LISE++ software package, where the trajectory of an ion passing through a spectrometer can be reconstructed based upon measurements at the focal plane. The results obtained at the S800 spectrograph are compared with predictions obtained with a three-fission progenitor (3EER) model. Systematic studies of fission-fragment properties continue to provide a valuable experimental benchmark for theoretical efforts directed toward describing this complex decay channel, that is important in the context of planning experiments to explore the neutron-rich region of the nuclear chart at rare-isotope beam facilities. △ Less

Submitted 31 January, 2024; originally announced January 2024.

Comments: 14 pages, 18 figures

Journal ref: Phys. Rev. C 108, 034604 (2023)

FedFair^3: Unlocking Threefold Fairness in Federated Learning

Authors: Simin Javaherian, Sanjeev Panta, Shelby Williams, Md Sirajul Islam, Li Chen

Abstract: Federated Learning (FL) is an emerging paradigm in machine learning without exposing clients' raw data. In practical scenarios with numerous clients, encouraging fair and efficient client participation in federated learning is of utmost importance, which is also challenging given the heterogeneity in data distribution and device properties. Existing works have proposed different client-selection m… ▽ More Federated Learning (FL) is an emerging paradigm in machine learning without exposing clients' raw data. In practical scenarios with numerous clients, encouraging fair and efficient client participation in federated learning is of utmost importance, which is also challenging given the heterogeneity in data distribution and device properties. Existing works have proposed different client-selection methods that consider fairness; however, they fail to select clients with high utilities while simultaneously achieving fair accuracy levels. In this paper, we propose a fair client-selection approach that unlocks threefold fairness in federated learning. In addition to having a fair client-selection strategy, we enforce an equitable number of rounds for client participation and ensure a fair accuracy distribution over the clients. The experimental results demonstrate that FedFair^3, in comparison to the state-of-the-art baselines, achieves 18.15% less accuracy variance on the IID data and 54.78% on the non-IID data, without decreasing the global accuracy. Furthermore, it shows 24.36% less wall-clock training time on average. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Health Text Simplification: An Annotated Corpus for Digestive Cancer Education and Novel Strategies for Reinforcement Learning

Authors: Md Mushfiqur Rahman, Mohammad Sabik Irbaz, Kai North, Michelle S. Williams, Marcos Zampieri, Kevin Lybarger

Abstract: Objective: The reading level of health educational materials significantly influences the understandability and accessibility of the information, particularly for minoritized populations. Many patient educational resources surpass the reading level and complexity of widely accepted standards. There is a critical need for high-performing text simplification models in health information to enhance d… ▽ More Objective: The reading level of health educational materials significantly influences the understandability and accessibility of the information, particularly for minoritized populations. Many patient educational resources surpass the reading level and complexity of widely accepted standards. There is a critical need for high-performing text simplification models in health information to enhance dissemination and literacy. This need is particularly acute in cancer education, where effective prevention and screening education can substantially reduce morbidity and mortality. Methods: We introduce Simplified Digestive Cancer (SimpleDC), a parallel corpus of cancer education materials tailored for health text simplification research, comprising educational content from the American Cancer Society, Centers for Disease Control and Prevention, and National Cancer Institute. Utilizing SimpleDC alongside the existing Med-EASi corpus, we explore Large Language Model (LLM)-based simplification methods, including fine-tuning, reinforcement learning (RL), reinforcement learning with human feedback (RLHF), domain adaptation, and prompt-based approaches. Our experimentation encompasses Llama 2 and GPT-4. A novel RLHF reward function is introduced, featuring a lightweight model adept at distinguishing between original and simplified texts, thereby enhancing the model's effectiveness with unlabeled data. Results: Fine-tuned Llama 2 models demonstrated high performance across various metrics. Our innovative RLHF reward function surpassed existing RL text simplification reward functions in effectiveness. The results underscore that RL/RLHF can augment fine-tuning, facilitating model training on unlabeled text and improving performance. △ Less

Submitted 29 March, 2024; v1 submitted 26 January, 2024; originally announced January 2024.

FAT-GEMs: (Field Assisted) Transparent Gaseous-Electroluminescence Multipliers

Authors: S. Leardini, A. Sáa-Hernández, M. Kuźniak, D. González-Díaz, C. D. R. Azevedo, F. Lucas, P. Amedo, A. F. V. Cortez, D. Fernández-Posada, B. Mehl, G. Nieradka, R. de Oliveira, V. Peskov, T. Sworobowicz, S. Williams

Abstract: The idea of implementing electroluminescence-based amplification through transparent multi-hole structures (FAT-GEMs) has been entertained for some time. Arguably, for such a technology to be attractive it should perform at least at a level comparable to conventional alternatives based on wires or meshes. We present now a detailed calorimetric study carried out for 5.9~keV X-rays in xenon, for pre… ▽ More The idea of implementing electroluminescence-based amplification through transparent multi-hole structures (FAT-GEMs) has been entertained for some time. Arguably, for such a technology to be attractive it should perform at least at a level comparable to conventional alternatives based on wires or meshes. We present now a detailed calorimetric study carried out for 5.9~keV X-rays in xenon, for pressures ranging from 2 to 10~bar, resorting to different geometries, production and post-processing techniques. At a reference voltage 5~times above the electroluminescence threshold ($E_{EL,th}\sim0.7$~kV/cm/bar), the number of photoelectrons measured for the best structure was found to be just 18\%~below that obtained for a double-mesh with the same thickness and at the same distance. The energy resolution stayed within 10\% (relative) of the double-mesh value. An innovative characteristic of the structure is that vacuum ultraviolet (VUV) transparency of the polymethyl methacrylate (PMMA) substrate was achieved, effectively, through tetraphenylbutadiene (TPB) coating of the electroluminescence channels combined with indium tin oxide (ITO) coating of the electrodes. This resulted in a $\times 2.25$-increased optical yield (compared to the bare structure), that was found to be in good agreement with simulations if assuming a TPB wavelength-shifting-efficiency at the level of WLSE=0.74-1.28, compatible with expected values. This result, combined with the stability demonstrated for the TPB coating under electric field (over 20~h of continuous operation), shows great potential to revolutionize electroluminescence-based instrumentation. △ Less

Submitted 28 February, 2024; v1 submitted 18 January, 2024; originally announced January 2024.

Journal ref: Front. Detect. Sci. Technol 2, 1373235 (2024)

Extreme Metastability of Diamond and its Transformation to BC8 Post-Diamond Phase of Carbon

Authors: Kien Nguyen-Cong, Jonathan T. Willman, Joseph M. Gonzalez, Ashley S. Williams, Anatoly B. Belonoshko, Stan G. Moore, Aidan P. Thompson, Mitchell A. Wood, Jon H. Eggert, Marius Millot, Luis A. Zepeda-Ruiz, Ivan I. Oleynik

Abstract: Diamond possesses exceptional physical properties due to its remarkably strong carbon-carbon bonding, leading to significant resilience to structural transformations at very high pressures and temperatures. Despite several experimental attempts, synthesis and recovery of the theoretically predicted post-diamond BC8 phase remains elusive. Through quantum accurate, multi-million atom molecular dynam… ▽ More Diamond possesses exceptional physical properties due to its remarkably strong carbon-carbon bonding, leading to significant resilience to structural transformations at very high pressures and temperatures. Despite several experimental attempts, synthesis and recovery of the theoretically predicted post-diamond BC8 phase remains elusive. Through quantum accurate, multi-million atom molecular dynamics (MD) simulations, we have uncovered the extreme metastability of diamond at very high pressures, significantly exceeding its range of thermodynamic stability. We predict the post-diamond BC8 phase to be experimentally accessible only within a narrow high pressure-temperature region of the carbon phase diagram. The diamond to BC8 transformation proceeds through pre-melting followed by BC8 nucleation and growth in the metastable carbon liquid. We propose a double-shock compression pathway to achieve BC8 synthesis, which is currently being explored in theory-inspired experiments at the National Ignition Facility. △ Less

Submitted 22 January, 2024; v1 submitted 16 January, 2024; originally announced January 2024.

Observations of type Ia supernova SN 2020nlb up to 600 days after explosion, and the distance to M85

Authors: S. C. Williams, R. Kotak, P. Lundqvist, S. Mattila, P. A. Mazzali, A. Pastorello, A. Reguitti, M. D. Stritzinger, A. Fiore, I. M. Hook, S. Moran, I. Salmaso

Abstract: The type Ia supernova (SN Ia) SN 2020nlb was discovered in the Virgo Cluster galaxy M85 shortly after explosion. Here we present observations that include one of the earliest high-quality spectra and some of the earliest multi-colour photometry of a SN Ia to date. We calculated that SN 2020nlb faded 1.28 +/- 0.02 mag in the B band in the first 15 d after maximum brightness. We independently fitted… ▽ More The type Ia supernova (SN Ia) SN 2020nlb was discovered in the Virgo Cluster galaxy M85 shortly after explosion. Here we present observations that include one of the earliest high-quality spectra and some of the earliest multi-colour photometry of a SN Ia to date. We calculated that SN 2020nlb faded 1.28 +/- 0.02 mag in the B band in the first 15 d after maximum brightness. We independently fitted a power-law rise to the early flux in each filter, and found that the optical filters all give a consistent first light date estimate. In contrast to the earliest spectra of SN 2011fe, those of SN 2020nlb show strong absorption features from singly ionised metals, including Fe II and Ti II, indicating lower-excitation ejecta at the earliest times. These earliest spectra show some similarities to maximum-light spectra of 1991bg-like SNe Ia. The spectra of SN 2020nlb then evolve to become hotter and more similar to SN 2011fe as it brightens towards peak. We also obtained a sequence of nebular spectra that extend up to 594 days after maximum light, a phase out to which SNe Ia are rarely followed. The [Fe III]/[Fe II] flux ratio (as measured from emission lines in the optical spectra) begins to fall around 300 days after peak; by the +594 d spectrum, the ionisation balance of the emitting region of the ejecta has shifted dramatically, with [Fe III] by then being completely absent. The final spectrum is almost identical to SN 2011fe at a similar epoch. Comparing our data to other SN Ia nebular spectra, there is a possible trend where SNe that were more luminous at peak tend to have a higher [Fe III]/[Fe II] flux ratio in the nebular phase, but there is a notable outlier in SN 2003hv. Finally, using light-curve fitting on our data, we estimate the distance modulus for M85 to be 30.99 +/- 0.19 mag, corresponding to a distance of $15.8^{+1.4}_{-1.3}$ Mpc. △ Less

Submitted 29 February, 2024; v1 submitted 16 January, 2024; originally announced January 2024.

Comments: Accepted for publication in A&A. New version which removes reference to an archival nebular spectrum of SN 1994D, as the spectrum has since been found to have been incorrectly associated with that supernova

Focus topics for the ECFA study on Higgs / Top / EW factories

Authors: Jorge de Blas, Patrick Koppenburg, Jenny List, Fabio Maltoni, Juan Alcaraz Maestre, Juliette Alimena, John Alison, Patrizia Azzi, Paolo Azzurri, Emanuele Bagnaschi, Timothy Barklow, Matthew J. Basso, Josh Bendavid, Martin Beneke, Eli Ben-Haim, Mikael Berggren, Marzia Bordone, Ivanka Bozovic, Valentina Cairo, Nuno Filipe Castro, Marina Cobal, Paula Collins, Mogens Dam, Valerio Dao, Matteo Defranchis , et al. (83 additional authors not shown)

Abstract: In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document. In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document. △ Less

Submitted 18 January, 2024; v1 submitted 15 January, 2024; originally announced January 2024.

Comments: v3: fixed spelling of two authors

Growth, catalysis and faceting of $α$-Ga$_2$O$_3$ and $α$-(In$_x$Ga$_{1-x}$)$_2$O$_3$ on $m$-plane $α$-Al$_2$O$_3$ by molecular beam epitaxy

Authors: Martin S. Williams, Manuel Alonso-Orts, Marco Schowalter, Alexander Karg, Sushma Raghuvansy, Jon P. McCandless, Debdeep Jena, Andreas Rosenauer, Martin Eickhoff, Patrick Vogt

Abstract: The growth of $α$-Ga$_2$O$_3$ and $α$-(In$_x$Ga$_{1-x}$)$_2$O$_3$ on $m$-plane $α$-Al$_2$O$_3$(10$\bar{1}$0) by molecular beam epitaxy (MBE) and metal-oxide-catalyzed epitaxy (MOCATAXY) is investigated. By systematically exploring the parameter space accessed by MBE and MOCATAXY, phase-pure $α$-Ga$_2$O$_3$(10$\bar{1}$0) and $α$-(In$_x$Ga$_{1-x}$)$_2$O$_3$(10$\bar{1}$0) thin films are realized. The… ▽ More The growth of $α$-Ga$_2$O$_3$ and $α$-(In$_x$Ga$_{1-x}$)$_2$O$_3$ on $m$-plane $α$-Al$_2$O$_3$(10$\bar{1}$0) by molecular beam epitaxy (MBE) and metal-oxide-catalyzed epitaxy (MOCATAXY) is investigated. By systematically exploring the parameter space accessed by MBE and MOCATAXY, phase-pure $α$-Ga$_2$O$_3$(10$\bar{1}$0) and $α$-(In$_x$Ga$_{1-x}$)$_2$O$_3$(10$\bar{1}$0) thin films are realized. The presence of In on the $α$-Ga$_2$O$_3$ growth surface remarkably expands its growth window far into the metal-rich flux regime and to higher growth temperatures. With increasing O-to-Ga flux ratio ($R_{\text{O}}$), In incorporates into $α$-(In$_x$Ga$_{1-x}$)$_2$O$_3$ up to $x \leq 0.08$. Upon a critical thickness, $β$-(In$_x$Ga$_{1-x}$)$_2$O$_3$ nucleates and subsequently heteroepitaxially grows on top of $α$-(In$_x$Ga$_{1-x}$)$_2$O$_3$ facets. Metal-rich MOCATAXY growth conditions, where $α$-Ga$_2$O$_3$ would not conventionally stabilize, lead to single-crystalline $α$-Ga$_2$O$_3$ with negligible In incorporation and improved surface morphology. Higher $T_{\text{G}}$ further results in single-crystalline $α$-Ga$_2$O$_3$ with well-defined terraces and step edges at their surfaces. For $R_{\text{O}} \leq 0.53$, In acts as a surfactant on the $α$-Ga$_2$O$_3$ growth surface by favoring step edges, while for $R_{\text{O}} \geq 0.8$, In incorporates and leads to a-plane $α$-(In$_x$Ga$_{1-x}$)$_2$O$_3$ faceting and the subsequent ($\bar{2}$01) $β$-(In$_x$Ga$_{1-x}$)$_2$O$_3$ growth on top. Thin film analysis by STEM reveals highly crystalline $α$-Ga$_2$O$_3$ layers and interfaces. We provide a phase diagram to guide the MBE and MOCATAXY growth of single-crystalline $α$-Ga$_2$O$_3$ on $α$-Al$_2$O$_3$(10$\bar{1}$0). △ Less

Submitted 21 November, 2023; originally announced November 2023.

Core groups

Authors: Daniel S. Silver, Lorenzo Traldi, Susan G. Williams

Abstract: The core group of a classical link was introduced independently by A.J. Kelly in 1991 and M. Wada in 1992. It is a link invariant defined by a presentation involving the arcs and crossings of a diagram, related to Wirtinger's presentation of the fundamental group of a link complement. Two close relatives of the core group are defined by presentations involving regions rather than arcs; one of them… ▽ More The core group of a classical link was introduced independently by A.J. Kelly in 1991 and M. Wada in 1992. It is a link invariant defined by a presentation involving the arcs and crossings of a diagram, related to Wirtinger's presentation of the fundamental group of a link complement. Two close relatives of the core group are defined by presentations involving regions rather than arcs; one of them is related to Dehn's presentation of a link group. The definitions are extended to virtual link diagrams and properties of the resulting invariants are discussed. △ Less

Submitted 1 June, 2024; v1 submitted 3 November, 2023; originally announced November 2023.

Comments: v1: 20 pages, 7 figures. v2: final prepublication version. Further changes may be made before publication in the Journal of Knot Theory and its Ramifications

Quantum Pathways for Charged Track Finding in High-Energy Collisions

Authors: Christopher Brown, Michael Spannowsky, Alexander Tapper, Simon Williams, Ioannis Xiotidis

Abstract: In high-energy particle collisions, charged track finding is a complex yet crucial endeavour. We propose a quantum algorithm, specifically quantum template matching, to enhance the accuracy and efficiency of track finding. Abstracting the Quantum Amplitude Amplification routine by introducing a data register, and utilising a novel oracle construction, allows data to be parsed to the circuit and ma… ▽ More In high-energy particle collisions, charged track finding is a complex yet crucial endeavour. We propose a quantum algorithm, specifically quantum template matching, to enhance the accuracy and efficiency of track finding. Abstracting the Quantum Amplitude Amplification routine by introducing a data register, and utilising a novel oracle construction, allows data to be parsed to the circuit and matched with a hit-pattern template, without prior knowledge of the input data. Furthermore, we address the challenges posed by missing hit data, demonstrating the ability of the quantum template matching algorithm to successfully identify charged-particle tracks from hit patterns with missing hits. Our findings therefore propose quantum methodologies tailored for real-world applications and underline the potential of quantum computing in collider physics. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 16 pages, 5 figues

Report number: IPPP/23/61

Journal ref: Front. Artif. Intell. 7:1339785 (2024)

Metrically Scaled Monocular Depth Estimation through Sparse Priors for Underwater Robots

Authors: Luca Ebner, Gideon Billings, Stefan Williams

Abstract: In this work, we address the problem of real-time dense depth estimation from monocular images for mobile underwater vehicles. We formulate a deep learning model that fuses sparse depth measurements from triangulated features to improve the depth predictions and solve the problem of scale ambiguity. To allow prior inputs of arbitrary sparsity, we apply a dense parameterization method. Our model ex… ▽ More In this work, we address the problem of real-time dense depth estimation from monocular images for mobile underwater vehicles. We formulate a deep learning model that fuses sparse depth measurements from triangulated features to improve the depth predictions and solve the problem of scale ambiguity. To allow prior inputs of arbitrary sparsity, we apply a dense parameterization method. Our model extends recent state-of-the-art approaches to monocular image based depth estimation, using an efficient encoder-decoder backbone and modern lightweight transformer optimization stage to encode global context. The network is trained in a supervised fashion on the forward-looking underwater dataset, FLSea. Evaluation results on this dataset demonstrate significant improvement in depth prediction accuracy by the fusion of the sparse feature priors. In addition, without any retraining, our method achieves similar depth prediction accuracy on a downward looking dataset we collected with a diver operated camera rig, conducting a survey of a coral reef. The method achieves real-time performance, running at 160 FPS on a laptop GPU and 7 FPS on a single CPU core and is suitable for direct deployment on embedded systems. The implementation of this work is made publicly available at https://github.com/ebnerluca/uw_depth. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Comments: Submitted to ICRA 2024

Ecological transition for the gas mixtures of the MRPC cosmic ray telescopes of the EEE Project

Authors: C. Ripoli, M. Abbrescia, C. Avanzini, L. Baldini, R. Baldini Ferroli, G. Batignani, M. Battaglieri, S. Boi, E. Bossini, F. Carnesecchi, D. Cavazza, C. Cicalò, L. Cifarelli, F. Coccetti, E. Coccia, A. Corvaglia, D. De Gruttola, S. De Pasquale, L. Galante, M. Garbini, I. Gnesi, E. Gramstad, S. Grazzi, E. S. Håland, D. Hatzifotiadou , et al. (40 additional authors not shown)

Abstract: The Extreme Energy Events (EEE) Collaboration is fully involved in an ecological transition. The use of the standard gas mixture, \ce{C_{2}H_{2}F_{4}}+ \ce{SF_{6}}, has stopped in favor of an alternative green mixture based on \ce{C_{3}H_{2}F_{4}} with the addition of He or \ce{CO_{2}}. The choise of these new mixtures is motivated by the significant lower Global Warming Potential (GWP) to reduce… ▽ More The Extreme Energy Events (EEE) Collaboration is fully involved in an ecological transition. The use of the standard gas mixture, \ce{C_{2}H_{2}F_{4}}+ \ce{SF_{6}}, has stopped in favor of an alternative green mixture based on \ce{C_{3}H_{2}F_{4}} with the addition of He or \ce{CO_{2}}. The choise of these new mixtures is motivated by the significant lower Global Warming Potential (GWP) to reduce the emission of gases potentially contributing to the greenhouse effect. The EEE experiment consists of 61 muon telescopes based on Multigap Resistive Plate Chambers (MRPCs), each telescope composed of 3 chambers filled with gas. Several EEE detectors are today completely fluxed with the new ecological mixture. This contribution will report recent results about the telescope performance obtained from studies with the eco-friendly alternative mixture carried out in the last years. △ Less

Submitted 29 September, 2023; originally announced September 2023.

MMST-ViT: Climate Change-aware Crop Yield Prediction via Multi-Modal Spatial-Temporal Vision Transformer

Authors: Fudong Lin, Summer Crawford, Kaleb Guillot, Yihe Zhang, Yan Chen, Xu Yuan, Li Chen, Shelby Williams, Robert Minvielle, Xiangming Xiao, Drew Gholson, Nicolas Ashwell, Tri Setiyono, Brenda Tubana, Lu Peng, Magdy Bayoumi, Nian-Feng Tzeng

Abstract: Precise crop yield prediction provides valuable information for agricultural planning and decision-making processes. However, timely predicting crop yields remains challenging as crop growth is sensitive to growing season weather variation and climate change. In this work, we develop a deep learning-based solution, namely Multi-Modal Spatial-Temporal Vision Transformer (MMST-ViT), for predicting c… ▽ More Precise crop yield prediction provides valuable information for agricultural planning and decision-making processes. However, timely predicting crop yields remains challenging as crop growth is sensitive to growing season weather variation and climate change. In this work, we develop a deep learning-based solution, namely Multi-Modal Spatial-Temporal Vision Transformer (MMST-ViT), for predicting crop yields at the county level across the United States, by considering the effects of short-term meteorological variations during the growing season and the long-term climate change on crops. Specifically, our MMST-ViT consists of a Multi-Modal Transformer, a Spatial Transformer, and a Temporal Transformer. The Multi-Modal Transformer leverages both visual remote sensing data and short-term meteorological data for modeling the effect of growing season weather variations on crop growth. The Spatial Transformer learns the high-resolution spatial dependency among counties for accurate agricultural tracking. The Temporal Transformer captures the long-range temporal dependency for learning the impact of long-term climate change on crops. Meanwhile, we also devise a novel multi-modal contrastive learning technique to pre-train our model without extensive human supervision. Hence, our MMST-ViT captures the impacts of both short-term weather variations and long-term climate change on crops by leveraging both satellite images and meteorological data. We have conducted extensive experiments on over 200 counties in the United States, with the experimental results exhibiting that our MMST-ViT outperforms its counterparts under three performance metrics of interest. △ Less

Submitted 19 September, 2023; v1 submitted 16 September, 2023; originally announced September 2023.

Journal ref: ICCV 2023

A flexible and efficient approach for missing transverse momentum reconstruction

Authors: William Balunas, Donatella Cavalli, Teng Jian Khoo, Matthew Klein, Peter Loch, Federica Piazza, Caterina Pizio, Silvia Resconi, Douglas Schaefer, Russell Smith, Sarah Williams

Abstract: Missing transverse momentum is a crucial observable for physics at hadron colliders, being the only constraint on the kinematics of "invisible" objects such as neutrinos and hypothetical dark matter particles. Computing missing transverse momentum at the highest possible precision, particularly in experiments at the energy frontier, can be a challenging procedure due to ambiguities in the distribu… ▽ More Missing transverse momentum is a crucial observable for physics at hadron colliders, being the only constraint on the kinematics of "invisible" objects such as neutrinos and hypothetical dark matter particles. Computing missing transverse momentum at the highest possible precision, particularly in experiments at the energy frontier, can be a challenging procedure due to ambiguities in the distribution of energy and momentum between many reconstructed particle candidates. This paper describes a novel solution for efficiently encoding information required for the computation of missing transverse momentum given arbitrary selection criteria for the constituent reconstructed objects. Pileup suppression using information from both the calorimeter and the inner detector is an integral component of the reconstruction procedure. Energy calibration and systematic variations are naturally supported. Following this strategy, the ATLAS Collaboration has been able to optimise the use of missing transverse momentum in diverse analyses throughout Runs 2 and 3 of the Large Hadron Collider and for future analyses. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Comments: 17 pages, 2 figures

LegalBench: A Collaboratively Built Benchmark for Measuring Legal Reasoning in Large Language Models

Authors: Neel Guha, Julian Nyarko, Daniel E. Ho, Christopher Ré, Adam Chilton, Aditya Narayana, Alex Chohlas-Wood, Austin Peters, Brandon Waldon, Daniel N. Rockmore, Diego Zambrano, Dmitry Talisman, Enam Hoque, Faiz Surani, Frank Fagan, Galit Sarfaty, Gregory M. Dickinson, Haggai Porat, Jason Hegland, Jessica Wu, Joe Nudell, Joel Niklaus, John Nay, Jonathan H. Choi, Kevin Tobia , et al. (15 additional authors not shown)

Abstract: The advent of large language models (LLMs) and their adoption by the legal community has given rise to the question: what types of legal reasoning can LLMs perform? To enable greater study of this question, we present LegalBench: a collaboratively constructed legal reasoning benchmark consisting of 162 tasks covering six different types of legal reasoning. LegalBench was built through an interdisc… ▽ More The advent of large language models (LLMs) and their adoption by the legal community has given rise to the question: what types of legal reasoning can LLMs perform? To enable greater study of this question, we present LegalBench: a collaboratively constructed legal reasoning benchmark consisting of 162 tasks covering six different types of legal reasoning. LegalBench was built through an interdisciplinary process, in which we collected tasks designed and hand-crafted by legal professionals. Because these subject matter experts took a leading role in construction, tasks either measure legal reasoning capabilities that are practically useful, or measure reasoning skills that lawyers find interesting. To enable cross-disciplinary conversations about LLMs in the law, we additionally show how popular legal frameworks for describing legal reasoning -- which distinguish between its many forms -- correspond to LegalBench tasks, thus giving lawyers and LLM developers a common vocabulary. This paper describes LegalBench, presents an empirical evaluation of 20 open-source and commercial LLMs, and illustrates the types of research explorations LegalBench enables. △ Less

Submitted 20 August, 2023; originally announced August 2023.

Comments: 143 pages, 79 tables, 4 figures

Using 4MOST to refine the measurement of galaxy properties: A case study of Supernova hosts

Authors: J. Dumayne, I. M. Hook, S. C. Williams, G. A. Lowes, D. Head, A. Fritz, O. Graur, B. Holwerda, A. Humphrey, A. Milligan, M. Nicholl, B. F. Roukema, P. Wiseman

Abstract: The Rubin Observatory's 10-year Legacy Survey of Space and Time will observe near to 20 billion galaxies. For each galaxy the properties can be inferred. Approximately $10^5$ galaxies observed per year will contain Type Ia supernovae (SNe), allowing SN host-galaxy properties to be calculated on a large scale. Measuring the properties of SN host-galaxies serves two main purposes. The first is that… ▽ More The Rubin Observatory's 10-year Legacy Survey of Space and Time will observe near to 20 billion galaxies. For each galaxy the properties can be inferred. Approximately $10^5$ galaxies observed per year will contain Type Ia supernovae (SNe), allowing SN host-galaxy properties to be calculated on a large scale. Measuring the properties of SN host-galaxies serves two main purposes. The first is that there are known correlations between host-galaxy type and supernova type, which can be used to aid in the classification of SNe. Secondly, Type Ia SNe exhibit correlations between host-galaxy properties and the peak luminosities of the SNe, which has implications for their use as standardisable candles in cosmology. We have used simulations to quantify the improvement in host-galaxy stellar mass ($M_\ast$) measurements when supplementing photometry from Rubin with spectroscopy from the 4-metre Multi-Object Spectroscopic Telescope (4MOST) instrument. We provide results in the form of expected uncertainties in $M_\ast$ for galaxies with 0.1 < $z$ < 0.9 and 18 < $r_{AB}$ < 25. We show that for galaxies mag 22 and brighter, combining Rubin and 4MOST data reduces the uncertainty measurements of galaxy $M_\ast$ by more than a factor of 2 compared with Rubin data alone. This applies for elliptical and Sc type hosts. We demonstrate that the reduced uncertainties in $M_\ast$ lead to an improvement of 7\% in the precision of the "mass step" correction. We expect our improved measurements of host-galaxy properties to aid in the photometric classification of SNe observed by Rubin. △ Less

Submitted 9 August, 2023; originally announced August 2023.

Comments: To be published in RASTI. 18 pages. 16 figures

Astrometry and Photometry for $\approx$1000 L, T, and Y Dwarfs from the UKIRT Hemisphere Survey

Authors: Adam C. Schneider, Jeffrey A. Munn, Frederick J. Vrba, Justice Bruursema, Scott E. Dahm, Stephen J. Williams, Michael C. Liu, Bryan N. Dorland

Abstract: We present positions, proper motions, and near-infrared photometry for 966 known objects with spectral types later than M observed as part of the the UKIRT Hemisphere Survey (UHS). We augment the photometry and astrometry from UHS with information from Gaia DR3, Pan-STARRS DR2, and CatWISE 2020 to produce a database of homogeneous photometry and astrometry for this sample. The multi-epoch survey s… ▽ More We present positions, proper motions, and near-infrared photometry for 966 known objects with spectral types later than M observed as part of the the UKIRT Hemisphere Survey (UHS). We augment the photometry and astrometry from UHS with information from Gaia DR3, Pan-STARRS DR2, and CatWISE 2020 to produce a database of homogeneous photometry and astrometry for this sample. The multi-epoch survey strategy of UHS allows us to determine proper motions for most sources, with a median proper motion uncertainty of $\sim$3.6 mas yr$^{-1}$. Our UHS proper motion measurements are generally in good agreement with those from Gaia DR3, Pan-STARRS, and CatWISE 2020, with UHS proper motions typically more precise than those from CatWISE 2020 and Pan-STARRS but not Gaia DR3. We critically analyze publicly available spectra for 406 members of this sample and provide updated near-infrared spectral types for $\sim$100 objects. We determine typical colors as a function of spectral type and provide absolute magnitude vs. spectral type relations for UHS $J$- and $K$-band photometry. Using newly determined proper motions, we highlight several objects of interest, such as objects with large tangential velocities, widely separated co-moving companions, and potential members of young nearby associations. △ Less

Submitted 21 July, 2023; originally announced July 2023.

Comments: Accepted to AJ

The ALMA Interferometric Pipeline Heuristics

Authors: Todd R. Hunter, Remy Indebetouw, Crystal L. Brogan, Kristin Berry, Chin-Shin Chang, Harold Francke, Vincent C. Geers, Laura Gómez, John E. Hibbard, Elizabeth M. Humphreys, Brian R. Kent, Amanda A. Kepley, Devaky Kunneriath, Andrew Lipnicky, Ryan A. Loomis, Brian S. Mason, Joseph S. Masters, Luke T. Maud, Dirk Muders, Jose Sabater, Kanako Sugimoto, László Szűcs, Eugene Vasiliev, Liza Videla, Eric Villard , et al. (3 additional authors not shown)

Abstract: We describe the calibration and imaging heuristics developed and deployed in the ALMA interferometric data processing pipeline, as of ALMA Cycle 9. The pipeline software framework is written in Python, with each data reduction stage layered on top of tasks and toolkit functions provided by the Common Astronomy Software Applications package. This framework supports a variety of tasks for observator… ▽ More We describe the calibration and imaging heuristics developed and deployed in the ALMA interferometric data processing pipeline, as of ALMA Cycle 9. The pipeline software framework is written in Python, with each data reduction stage layered on top of tasks and toolkit functions provided by the Common Astronomy Software Applications package. This framework supports a variety of tasks for observatory operations, including science data quality assurance, observing mode commissioning, and user reprocessing. It supports ALMA and VLA interferometric data along with ALMA and NRO45m single dish data, via different stages and heuristics. In addition to producing calibration tables, calibrated measurement sets, and cleaned images, the pipeline creates a WebLog which serves as the primary interface for verifying the data quality assurance by the observatory and for examining the contents of the data by the user. Following the adoption of the pipeline by ALMA Operations in 2014, the heuristics have been refined through annual development cycles, culminating in a new pipeline release aligned with the start of each ALMA Cycle of observations. Initial development focused on basic calibration and flagging heuristics (Cycles 2-3), followed by imaging heuristics (Cycles 4-5), refinement of the flagging and imaging heuristics with parallel processing (Cycles 6-7), addition of the moment difference analysis to improve continuum channel identification (2020 release), addition of a spectral renormalization stage (Cycle 8), and improvement in low SNR calibration heuristics (Cycle 9). In the two most recent Cycles, 97% of ALMA datasets were calibrated and imaged with the pipeline, ensuring long-term automated reproducibility. We conclude with a brief description of plans for future additions, including self-calibration, multi-configuration imaging, and calibration and imaging of full polarization data. △ Less

Submitted 25 July, 2023; v1 submitted 12 June, 2023; originally announced June 2023.

Comments: Accepted for publication by Publications of the Astronomical Society of the Pacific, 65 pages, 20 figures, 10 tables, 2 appendices. Small corrections and additions from the proof stage have been applied

Journal ref: Publications of the Astronomical Society of the Pacific, volume 135, number 1049, 074501, 2023 July 24

A Semi-supervised Object Detection Algorithm for Underwater Imagery

Authors: Suraj Bijjahalli, Oscar Pizarro, Stefan B. Williams

Abstract: Detection of artificial objects from underwater imagery gathered by Autonomous Underwater Vehicles (AUVs) is a key requirement for many subsea applications. Real-world AUV image datasets tend to be very large and unlabelled. Furthermore, such datasets are typically imbalanced, containing few instances of objects of interest, particularly when searching for unusual objects in a scene. It is therefo… ▽ More Detection of artificial objects from underwater imagery gathered by Autonomous Underwater Vehicles (AUVs) is a key requirement for many subsea applications. Real-world AUV image datasets tend to be very large and unlabelled. Furthermore, such datasets are typically imbalanced, containing few instances of objects of interest, particularly when searching for unusual objects in a scene. It is therefore, difficult to fit models capable of reliably detecting these objects. Given these factors, we propose to treat artificial objects as anomalies and detect them through a semi-supervised framework based on Variational Autoencoders (VAEs). We develop a method which clusters image data in a learned low-dimensional latent space and extracts images that are likely to contain anomalous features. We also devise an anomaly score based on extracting poorly reconstructed regions of an image. We demonstrate that by applying both methods on large image datasets, human operators can be shown candidate anomalous samples with a low false positive rate to identify objects of interest. We apply our approach to real seafloor imagery gathered by an AUV and evaluate its sensitivity to the dimensionality of the latent representation used by the VAE. We evaluate the precision-recall tradeoff and demonstrate that by choosing an appropriate latent dimensionality and threshold, we are able to achieve an average precision of 0.64 on unlabelled datasets. △ Less

Submitted 7 June, 2023; originally announced June 2023.

Comments: 8 pages, 9 figures, submitted to IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2023

NTKCPL: Active Learning on Top of Self-Supervised Model by Estimating True Coverage

Authors: Ziting Wen, Oscar Pizarro, Stefan Williams

Abstract: High annotation cost for training machine learning classifiers has driven extensive research in active learning and self-supervised learning. Recent research has shown that in the context of supervised learning different active learning strategies need to be applied at various stages of the training process to ensure improved performance over the random baseline. We refer to the point where the nu… ▽ More High annotation cost for training machine learning classifiers has driven extensive research in active learning and self-supervised learning. Recent research has shown that in the context of supervised learning different active learning strategies need to be applied at various stages of the training process to ensure improved performance over the random baseline. We refer to the point where the number of available annotations changes the suitable active learning strategy as the phase transition point. In this paper, we establish that when combining active learning with self-supervised models to achieve improved performance, the phase transition point occurs earlier. It becomes challenging to determine which strategy should be used for previously unseen datasets. We argue that existing active learning algorithms are heavily influenced by the phase transition because the empirical risk over the entire active learning pool estimated by these algorithms is inaccurate and influenced by the number of labeled samples. To address this issue, we propose a novel active learning strategy, neural tangent kernel clustering-pseudo-labels (NTKCPL). It estimates empirical risk based on pseudo-labels and the model prediction with NTK approximation. We analyze the factors affecting this approximation error and design a pseudo-label clustering generation method to reduce the approximation error. We validate our method on five datasets, empirically demonstrating that it outperforms the baseline methods in most cases and is valid over a wider range of training budgets. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Evaluating the Potential of Disaggregated Memory Systems for HPC applications

Authors: Nan Ding, Pieter Maris, Hai Ah Nam, Taylor Groves, Muaaz Gul Awan, LeAnn Lindsey, Christopher Daley, Oguz Selvitopi, Leonid Oliker, Nicholas Wright, Samuel Williams

Abstract: Disaggregated memory is a promising approach that addresses the limitations of traditional memory architectures by enabling memory to be decoupled from compute nodes and shared across a data center. Cloud platforms have deployed such systems to improve overall system memory utilization, but performance can vary across workloads. High-performance computing (HPC) is crucial in scientific and enginee… ▽ More Disaggregated memory is a promising approach that addresses the limitations of traditional memory architectures by enabling memory to be decoupled from compute nodes and shared across a data center. Cloud platforms have deployed such systems to improve overall system memory utilization, but performance can vary across workloads. High-performance computing (HPC) is crucial in scientific and engineering applications, where HPC machines also face the issue of underutilized memory. As a result, improving system memory utilization while understanding workload performance is essential for HPC operators. Therefore, learning the potential of a disaggregated memory system before deployment is a critical step. This paper proposes a methodology for exploring the design space of a disaggregated memory system. It incorporates key metrics that affect performance on disaggregated memory systems: memory capacity, local and remote memory access ratio, injection bandwidth, and bisection bandwidth, providing an intuitive approach to guide machine configurations based on technology trends and workload characteristics. We apply our methodology to analyze thirteen diverse workloads, including AI training, data analysis, genomics, protein, fusion, atomic nuclei, and traditional HPC bookends. Our methodology demonstrates the ability to comprehend the potential and pitfalls of a disaggregated memory system and provides motivation for machine configurations. Our results show that eleven of our thirteen applications can leverage injection bandwidth disaggregated memory without affecting performance, while one pays a rack bisection bandwidth penalty and two pay the system-wide bisection bandwidth penalty. In addition, we also show that intra-rack memory disaggregation would meet the application's memory requirement and provide enough remote memory bandwidth. △ Less

Submitted 16 June, 2023; v1 submitted 6 June, 2023; originally announced June 2023.

Comments: The submission builds on the following conference paper: N. Ding, S. Williams, H.A. Nam, et al. Methodology for Evaluating the Potential of Disaggregated Memory Systems,2nd International Workshop on RESource DISaggregation in High-Performance Computing (RESDIS), November 18, 2022. It is now submitted to the CCPE journal for review

Enhanced piezoelectric response at nanoscale vortex structures in ferroelectrics

Authors: Xiaowen Shi, Nimish Prashant Nazirkar, Ravi Kashikar, Dmitry Karpov, Shola Folarin, Zachary Barringer, Skye Williams, Boris Kiefer, Ross Harder, Wonsuk Cha, Ruihao Yuan, Zhen Liu, Dezhen Xue, Turab Lookman, Inna Ponomareva, Edwin Fohtung

Abstract: The piezoelectric response is a measure of the sensitivity of a material's polarization to stress or its strain to an applied field. Using in-operando x-ray Bragg coherent diffraction imaging, we observe that topological vortices are the source of a five-fold enhancement of the piezoelectric response near the vortex core. The vortices form where several low symmetry ferroelectric phases and phase… ▽ More The piezoelectric response is a measure of the sensitivity of a material's polarization to stress or its strain to an applied field. Using in-operando x-ray Bragg coherent diffraction imaging, we observe that topological vortices are the source of a five-fold enhancement of the piezoelectric response near the vortex core. The vortices form where several low symmetry ferroelectric phases and phase boundaries coalesce. Unlike bulk ferroelectric solid solutions in which a large piezoelectric response is associated with coexisting phases in the proximity of the triple point, the largest responses for pure BaTiO3 at the nanoscale are in spatial regions of extremely small spontaneous polarization at vortex cores. The response decays inversely with polarization away from the vortex, analogous to the behavior in bulk ceramics as the cation compositions are varied away from the triple point. We use first-principles-based molecular dynamics to augment our observations, and our results suggest that nanoscale piezoelectric materials with large piezoelectric response can be designed within a parameter space governed by vortex cores. Our findings have implications for the development of next-generation nanoscale piezoelectric materials. △ Less

Submitted 22 May, 2023; originally announced May 2023.

Comments: 13 pages, 5 figures

Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies

Authors: James Paul Mason, Alexandra Werth, Colin G. West, Allison A. Youngblood, Donald L. Woodraska, Courtney Peck, Kevin Lacjak, Florian G. Frick, Moutamen Gabir, Reema A. Alsinan, Thomas Jacobsen, Mohammad Alrubaie, Kayla M. Chizmar, Benjamin P. Lau, Lizbeth Montoya Dominguez, David Price, Dylan R. Butler, Connor J. Biron, Nikita Feoktistov, Kai Dewey, N. E. Loomis, Michal Bodzianowski, Connor Kuybus, Henry Dietrick, Aubrey M. Wolfe , et al. (977 additional authors not shown)

Abstract: Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms th… ▽ More Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counter-intuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, $α=2$ as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed $>$600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: pre-flare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that $α= 1.63 \pm 0.03$. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating. △ Less

Submitted 9 May, 2023; originally announced May 2023.

Comments: 1,002 authors, 14 pages, 4 figures, 3 tables, published by The Astrophysical Journal on 2023-05-09, volume 948, page 71

Contactless hand tremor amplitude measurement using smartphones: development and pilot evaluation

Authors: James Bungay, Osasenaga Emokpae, Samuel D. Relton, Jane Alty, Stefan Williams, Hui Fang, David C. Wong

Abstract: Background: Physiological tremor is defined as an involuntary and rhythmic shaking. Tremor of the hand is a key symptom of multiple neurological diseases, and its frequency and amplitude differs according to both disease type and disease progression. In routine clinical practice, tremor frequency and amplitude are assessed by expert rating using a 0 to 4 integer scale. Such ratings are subjective… ▽ More Background: Physiological tremor is defined as an involuntary and rhythmic shaking. Tremor of the hand is a key symptom of multiple neurological diseases, and its frequency and amplitude differs according to both disease type and disease progression. In routine clinical practice, tremor frequency and amplitude are assessed by expert rating using a 0 to 4 integer scale. Such ratings are subjective and have poor inter-rater reliability. There is thus a clinical need for a practical and accurate method for objectively assessing hand tremor. Objective: to develop a proof of principle method to measure hand tremor amplitude from smartphone videos. Methods: We created a computer vision pipeline that automatically extracts salient points on the hand and produces a 1-D time series of movement due to tremor, in pixels. Using the smartphones' depth measurement, we convert this measure into real distance units. We assessed the accuracy of the method using 60 videos of simulated tremor of different amplitudes from two healthy adults. Videos were taken at distances of 50, 75 and 100 cm between hand and camera. The participants had skin tone II and VI on the Fitzpatrick scale. We compared our method to a gold-standard measurement from a slide rule. Bland-Altman methods agreement analysis indicated a bias of 0.04 cm and 95% limits of agreement from -1.27 to 1.20 cm. Furthermore, we qualitatively observed that the method was robust to differences in skin tone and limited occlusion, such as a band-aid affixed to the participant's hand. Clinical relevance: We have demonstrated how tremor amplitude can be measured from smartphone videos. In conjunction with tremor frequency, this approach could be used to help diagnose and monitor neurological diseases △ Less

Submitted 28 April, 2023; originally announced April 2023.

Comments: Accepted to IEEE EMBC 2023, Sydney (pre-refereed version)