-
Experimental study of a cryogenic power supply for superconducting DC devices
Authors:
Lauro Ferreira,
Yasmine Baazizi,
Simon Meunier,
Tanguy Phulpin,
Richard Beljio,
Frédéric Trillaud,
Tian-Yong Gong,
Gustavo Henn,
Loïc Quéval
Abstract:
Although a superconductor has no DC losses, a superconducting system does have significant losses, especially when it comes to power supply. Here, we study two different power supply systems. The first, a conventional one, consists of a transformer and a diode bridge operating at room temperature, plus current leads that allow the current to flow from the room-temperature medium to the cryogenic m…
▽ More
Although a superconductor has no DC losses, a superconducting system does have significant losses, especially when it comes to power supply. Here, we study two different power supply systems. The first, a conventional one, consists of a transformer and a diode bridge operating at room temperature, plus current leads that allow the current to flow from the room-temperature medium to the cryogenic medium. The second consists of a transformer with a superconducting secondary winding, combined with a diode bridge operating at cryogenic temperature, thus dispensing with the need for current leads. We are experimentally comparing the performance of conventional and superconducting transformers, as well as the performance of a diode bridge at ambient and cryogenic temperatures. Our results indicate that the prototype superconducting transformer developed has lower winding resistance and secondary leakage inductance than the conventional transformer. In addition, we found that only certain diodes are suitable for operation at cryogenic temperatures. Finally, the diode bridge made from adapted diodes shows reduced losses at cryogenic temperature. This experimental work is the first step towards the realization of a complete power supply system for a superconducting device.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Electromagnetic modeling of large-scale high-temperature superconductor systems
Authors:
Edgar Berrospe-Juarez,
Frederic Trillaud,
Victor M R Zermeno,
Francesco Grilli
Abstract:
The development of the high-temperature superconductors (HTS) conductors has allowed the development of diverse superconductor devices. Some of these devises, like the power generators and high-field magnets, are classified as large-scale HTS systems, because they are made of hundreds or thousands of turns. Mathematical models are required to address the analysis of these kind of systems. This tas…
▽ More
The development of the high-temperature superconductors (HTS) conductors has allowed the development of diverse superconductor devices. Some of these devises, like the power generators and high-field magnets, are classified as large-scale HTS systems, because they are made of hundreds or thousands of turns. Mathematical models are required to address the analysis of these kind of systems. This task cannot be done by means of analytical models, because they are limited to the analysis of simple assemblies. The finite-element models using the H formulation have been extensively used during the last years. Nevertheless, the use of H formulation models to analyze large-scale systems is hindered by the excessive computational load. The recently proposed T-A formulation models have allowed building more efficient models for systems made of HTS tapes. Additionally, the homogenization and multi-scaling methods have been successfully applied in conjunction with the H and T-A formulations, these simplification methods allows reducing the required computational resources. In this article a new simplification method, called densification, is proposed. The strategies emerging from the combined use of the formulations and the simplification methods already mentioned are extensively explored, and the comprehensive validation and comparison of all the resulting strategies is presented.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
Screening Current-Induced Field and Field Drift Study in HTS coils using T-A homogenous model
Authors:
Edgar Berrospe-Juarez,
Frederic Trillaud,
Víctor M R Zermeño,
Francesco Grilli
Abstract:
The emergence of second generation (2G) high-temperature superconductor (HTS) tapes has favored the development of HTS magnets for their applications in areas such as NMR, MRI and high field magnets. The screening current-induced field and the field drift are two major problems hindering the use of HTS tapes in the mentioned areas. Both problems are caused by the screening current, then it is nece…
▽ More
The emergence of second generation (2G) high-temperature superconductor (HTS) tapes has favored the development of HTS magnets for their applications in areas such as NMR, MRI and high field magnets. The screening current-induced field and the field drift are two major problems hindering the use of HTS tapes in the mentioned areas. Both problems are caused by the screening current, then it is necessary to have a modeling strategy capable to estimate such phenomena. Thus far, the H formulation has been the most successful and used approach to model medium-size systems (hundreds of tapes). However, its application to large-scale systems is still impaired by excessive computation times and memory requirements. Homogenization and multi-scaling strategies have been successfully implemented to increase the computational efficiency. In this contribution, we show that using the homogenization technique with the recently developed T-A formulation allows reducing the computation time and the amount of memory up to the point that real-time simulations of slow ramping cycles of large-scale systems are possible. The T-A homogeneous model also allows systematically investigating the screening current using numerical simulations.
△ Less
Submitted 17 August, 2019;
originally announced August 2019.
-
T-A homogenized and multi-scale models with real-time simulation capabilities for large-scale HTS systems
Authors:
Edgar Berrospe-Juarez,
Víctor M R Zermeño,
Frederic Trillaud,
Francesco Grilli
Abstract:
The emergence of second-generation high temperature superconducting tapes has favored the development of large-scale superconductor systems. The mathematical models for superconductors have evolved from simple analytical models to complex numerical models. The available analytical models are just capable of estimating electromagnetic quantities in single wires or small arrays. The numerical models…
▽ More
The emergence of second-generation high temperature superconducting tapes has favored the development of large-scale superconductor systems. The mathematical models for superconductors have evolved from simple analytical models to complex numerical models. The available analytical models are just capable of estimating electromagnetic quantities in single wires or small arrays. The numerical models like the H formulation finite element models are useful for the analysis of more medium-size systems, but their application in large-scale systems is problematic due to the excessive cost in terms of memory and the computation time. Then it is necessary to devise new strategies to tackle this challenge. The homogenization and the multi-scale approach are methodologies that have successfully simplified the description of the systems allowing the study of large-scale systems. Recently, efficient calculations have been achieved using the T-A formulation. In this manuscript, we analyze the adequate order of the elements used in the T-A formulation. More importantly, we propose a series of adaptations to the homogenization and multi-scale methodologies in order to allow their implementation to the T-A formulation models. The proposed strategies are validated by means of comparing them with the H reference model of a racetrack coil. The computation time and memory demand are substantially reduced up to a point that makes it possible to perform real-time simulations for slow ramping cycles. At the same time the comparison demonstrates a very good agreement with respect to the reference model, both at a local and global level, is achieved.
△ Less
Submitted 22 October, 2018;
originally announced December 2018.
-
Real-time simulation of large-scale HTS systems: multi-scale and homogeneous models using T-A formulation
Authors:
Edgar Berrospe-Juarez,
Victor M R Zermeno,
Frederic Trillaud,
Francesco Grilli
Abstract:
The emergence of second-generation high temperature superconducting tapes has favored the development of large-scale superconductor systems. The mathematical models capable of estimating electromagnetic quantities in superconductors have evolved from simple analytical models to complex numerical models. The available analytical models are limited to the analysis of single wires or infinite arrays…
▽ More
The emergence of second-generation high temperature superconducting tapes has favored the development of large-scale superconductor systems. The mathematical models capable of estimating electromagnetic quantities in superconductors have evolved from simple analytical models to complex numerical models. The available analytical models are limited to the analysis of single wires or infinite arrays that, in general, do not represent real devices in real applications. The numerical models based on finite element method using the H formulation of the Maxwells equations are useful for the analysis of medium-size systems, but their application in large-scale systems is problematic due to the excessive computational cost in terms of memory and computation time. Then it is necessary to devise new strategies to make the computation more efficient. The homogenization and the multi-scale methods have successfully simplified the description of the systems allowing the study of large-scale systems. Also, efficient calculations have been achieved using the T-A formulation. In the present work, we propose a series of adaptations to the multi-scale and homogenization methods so that they can be efficiently used in conjunction with the T-A formulation to compute the distribution of current density and hysteresis losses in the superconducting layer of superconducting tapes. The computation time and the amount of memory are substantially reduced up to a point that it is possible to achieve real-time simulations of HTS large-scale systems under slow ramping cycles of practical importance on personal computers.
△ Less
Submitted 27 February, 2019; v1 submitted 22 November, 2018;
originally announced November 2018.
-
Iterative multi-scale method for accurate estimation of current density and hysteresis losses in large scale HTS systems
Authors:
Edgar Berrospe-Juarez,
Victor M. R. Zermeno,
Frederic Trillaud,
Francesco Grilli
Abstract:
In recent years, commercial HTS superconductors have gained an increasing interest for their use in applications involving large-scale superconductor systems. These systems are typically made from hundreds to thousands of turns of conductors. Due to the large number of turns, the simulations of a whole system can become prohibitive in terms of computing time and load. Therefore, an efficient strat…
▽ More
In recent years, commercial HTS superconductors have gained an increasing interest for their use in applications involving large-scale superconductor systems. These systems are typically made from hundreds to thousands of turns of conductors. Due to the large number of turns, the simulations of a whole system can become prohibitive in terms of computing time and load. Therefore, an efficient strategy which does not compromise the accuracy of calculations is needed. Recently, a method, based on a multi-scale approach, showed that the computational load can be lowered by simulating, in detail, only several significant tapes from the system. The main limitation of this approach is the inaccuracy of the estimation of the background magnetic field. To address this issue, we consider the following two complementary strategies. The first strategy consists in the iterative implementation of the multi-scale method. The multi-scale method solves itself a dynamic problem, the iterative implementation proposed here is the iterative application of the multi-scale method, and a dynamic solution is obtained at each iteration. The second strategy is a new interpolation method for current distributions, based on the inverse cumulative density function interpolation technique. With respect to conventional interpolation methods, a more realistic current density distribution is then obtained, which allows for a better estimation of the background magnetic field, and consequently, a better estimation of the hysteresis losses. In contrast with previous works, here we do not focus only on the estimation of the hysteresis losses, but also the estimation of background field and the current density distribution is addressed.
△ Less
Submitted 11 October, 2018; v1 submitted 20 November, 2017;
originally announced November 2017.
-
First Direct-Detection Constraints on eV-Scale Hidden-Photon Dark Matter with DAMIC at SNOLAB
Authors:
A. Aguilar-Arevalo,
D. Amidei,
X. Bertou,
M. Butner,
G. Cancelo,
A. Castañeda Vázquez,
B. A. Cervantes Vergara,
A. E. Chavarria,
C. R. Chavez,
J. R. T. de Mello Neto,
J. C. D'Olivo,
J. Estrada,
G. Fernandez Moroni,
R. Gaïor,
Y. Guardincerri,
K. P. Hernández Torres,
F. Izraelevitch,
A. Kavner,
B. Kilminster,
I. Lawson,
A. Letessier-Selvon,
J. Liao,
A. Matalon,
V. B. B. Mello,
J. Molina
, et al. (13 additional authors not shown)
Abstract:
We present direct detection constraints on the absorption of hidden-photon dark matter with particle masses in the range 1.2-30 eV$c^{-2}$ with the DAMIC experiment at SNOLAB. Under the assumption that the local dark matter is entirely constituted of hidden photons, the sensitivity to the kinetic mixing parameter $κ$ is competitive with constraints from solar emission, reaching a minimum value of…
▽ More
We present direct detection constraints on the absorption of hidden-photon dark matter with particle masses in the range 1.2-30 eV$c^{-2}$ with the DAMIC experiment at SNOLAB. Under the assumption that the local dark matter is entirely constituted of hidden photons, the sensitivity to the kinetic mixing parameter $κ$ is competitive with constraints from solar emission, reaching a minimum value of 2.2$\times$$10^{-14}$ at 17 eV$c^{-2}$. These results are the most stringent direct detection constraints on hidden-photon dark matter in the galactic halo with masses 3-12 eV$c^{-2}$ and the first demonstration of direct experimental sensitivity to ionization signals $<$12 eV from dark matter interactions.
△ Less
Submitted 11 April, 2017; v1 submitted 9 November, 2016;
originally announced November 2016.
-
The CONNIE experiment
Authors:
CONNIE Collaboration,
A. Aguilar-Arevalo,
X. Bertou,
C. Bonifazi,
M. Butner,
G. Cancelo,
A. Castaneda Vazquez,
B. Cervantes Vergara,
C. R. Chavez,
H. Da Motta,
J. C. D'Olivo,
J. Dos Anjos,
J. Estrada,
G. Fernandez Moroni,
R. Ford,
A. Foguel,
K. P. Hernandez Torres,
F. Izraelevitch,
A. Kavner,
B. Kilminster,
K. Kuk,
H. P. Lima Jr.,
M. Makler,
J. Molina,
G. Moreno-Granados
, et al. (6 additional authors not shown)
Abstract:
The CONNIE experiment uses fully depleted, high resistivity CCDs as particle detectors in an attempt to measure for the first time the Coherent Neutrino-Nucleus Elastic Scattering of antineutrinos from a nuclear reactor with silicon nuclei.This talk, given at the XV Mexican Workshop on Particles and Fields (MWPF), discussed the potential of CONNIE to perform this measurement, the installation prog…
▽ More
The CONNIE experiment uses fully depleted, high resistivity CCDs as particle detectors in an attempt to measure for the first time the Coherent Neutrino-Nucleus Elastic Scattering of antineutrinos from a nuclear reactor with silicon nuclei.This talk, given at the XV Mexican Workshop on Particles and Fields (MWPF), discussed the potential of CONNIE to perform this measurement, the installation progress at the Angra dos Reis nuclear power plant, as well as the plans for future upgrades.
△ Less
Submitted 10 October, 2016; v1 submitted 4 August, 2016;
originally announced August 2016.
-
Search for low-mass WIMPs in a 0.6 kg day exposure of the DAMIC experiment at SNOLAB
Authors:
A. Aguilar-Arevalo,
D. Amidei,
X. Bertou,
M. Butner,
G. Cancelo,
A. Castañeda Vázquez,
B. A. Cervantes Vergara,
A. E. Chavarria,
C. R. Chavez,
J. R. T. de Mello Neto,
J. C. D'Olivo,
J. Estrada,
G. Fernandez Moroni,
R. Gaïor,
Y. Guandincerri,
K. P. Hernández Torres,
F. Izraelevitch,
A. Kavner,
B. Kilminster,
I. Lawson,
A. Letessier-Selvon,
J. Liao,
J. Molina,
J. R. Peña,
P. Privitera
, et al. (13 additional authors not shown)
Abstract:
We present results of a dark matter search performed with a 0.6 kg day exposure of the DAMIC experiment at the SNOLAB underground laboratory. We measure the energy spectrum of ionization events in the bulk silicon of charge-coupled devices down to a signal of 60 eV electron equivalent. The data are consistent with radiogenic backgrounds, and constraints on the spin-independent WIMP-nucleon elastic…
▽ More
We present results of a dark matter search performed with a 0.6 kg day exposure of the DAMIC experiment at the SNOLAB underground laboratory. We measure the energy spectrum of ionization events in the bulk silicon of charge-coupled devices down to a signal of 60 eV electron equivalent. The data are consistent with radiogenic backgrounds, and constraints on the spin-independent WIMP-nucleon elastic-scattering cross section are accordingly placed. A region of parameter space relevant to the potential signal from the CDMS-II Si experiment is excluded using the same target for the first time. This result obtained with a limited exposure demonstrates the potential to explore the low-mass WIMP region (<10 GeV/$c^{2}$) of the upcoming DAMIC100, a 100 g detector currently being installed in SNOLAB.
△ Less
Submitted 9 November, 2016; v1 submitted 25 July, 2016;
originally announced July 2016.
-
Results of the engineering run of the Coherent Neutrino Nucleus Interaction Experiment (CONNIE)
Authors:
A. Aguilar-Arevalo,
X. Bertou,
C. Bonifazi,
M. Butner,
G. Cancelo,
A. Castaneda Vazquez,
C. R. Chavez,
H. Da Motta,
J. C. DOlivo,
J. Dos Anjos,
J. Estrada,
G. Fernandez Moroni,
R. Ford,
A. Foguel,
K. P. Hernandez Torres,
F. Izraelevitch,
H. P. Lima Jr.,
B. Kilminster,
K. Kuk,
M. Makler,
J. Molina,
G. Moreno-Granados,
J. M. Moro,
E. E. Paolini,
M. Sofo Haro
, et al. (3 additional authors not shown)
Abstract:
The CONNIE detector prototype is operating at a distance of 30 m from the core of a 3.8 GW$_{\rm th}$ nuclear reactor with the goal of establishing Charge-Coupled Devices (CCD) as a new technology for the detection of coherent elastic neutrino-nucleus scattering. We report on the results of the engineering run with an active mass of 4 g of silicon. The CCD array is described, and the performance o…
▽ More
The CONNIE detector prototype is operating at a distance of 30 m from the core of a 3.8 GW$_{\rm th}$ nuclear reactor with the goal of establishing Charge-Coupled Devices (CCD) as a new technology for the detection of coherent elastic neutrino-nucleus scattering. We report on the results of the engineering run with an active mass of 4 g of silicon. The CCD array is described, and the performance observed during the first year is discussed. A compact passive shield was deployed for the detector, producing an order of magnitude reduction in the background rate. The remaining background observed during the run was stable, and dominated by internal contamination in the detector packaging materials. The {\it in-situ} calibration of the detector using X-ray lines from fluorescence demonstrates good stability of the readout system. The event rates with the reactor on and off are compared, and no excess is observed coming from nuclear fission at the power plant. The upper limit for the neutrino event rate is set two orders of magnitude above the expectations for the standard model. The results demonstrate the cryogenic CCD-based detector can be remotely operated at the reactor site with stable noise below 2 e$^-$ RMS and stable background rates. The success of the engineering test provides a clear path for the upgraded 100 g detector to be deployed during 2016.
△ Less
Submitted 5 April, 2016;
originally announced April 2016.
-
The DAMIC dark matter experiment
Authors:
A. Aguilar-Arevalo,
D. Amidei,
X. Bertou,
D. Bole,
M. Butner,
G. Cancelo,
A. Castañeda Vázquez,
A. E. Chavarria,
J. R. T. de Mello Neto,
S. Dixon,
J. C. D'Olivo,
J. Estrada,
G. Fernandez Moroni,
K. P. Hernández Torres,
F. Izraelevitch,
A. Kavner,
B. Kilminster,
I. Lawson,
J. Liao,
M. López,
J. Molina,
G. Moreno-Granados,
J. Pena,
P. Privitera,
Y. Sarkis
, et al. (8 additional authors not shown)
Abstract:
The DAMIC (Dark Matter in CCDs) experiment uses high resistivity, scientific grade CCDs to search for dark matter. The CCD's low electronic noise allows an unprecedently low energy threshold of a few tens of eV that make it possible to detect silicon recoils resulting from interactions of low mass WIMPs. In addition the CCD's high spatial resolution and the excellent energy response results in ver…
▽ More
The DAMIC (Dark Matter in CCDs) experiment uses high resistivity, scientific grade CCDs to search for dark matter. The CCD's low electronic noise allows an unprecedently low energy threshold of a few tens of eV that make it possible to detect silicon recoils resulting from interactions of low mass WIMPs. In addition the CCD's high spatial resolution and the excellent energy response results in very effective background identification techniques. The experiment has a unique sensitivity to dark matter particles with masses below 10 GeV/c$^2$. Previous results have demonstrated the potential of this technology, motivating the construction of DAMIC100, a 100 grams silicon target detector currently being installed at SNOLAB. In this contribution, the mode of operation and unique imaging capabilities of the CCDs, and how they may be exploited to characterize and suppress backgrounds will be discussed, as well as physics results after one year of data taking.
△ Less
Submitted 7 October, 2015;
originally announced October 2015.
-
Status of the DAMIC direct dark matter search experiment
Authors:
DAMIC Collaboration,
A. Aguilar-Arevalo,
D. Amidei,
X. Bertou,
D. Boule,
M. Butner,
G. Cancelo,
A. Castañeda Vázquez,
A. E. Chavarría,
J. R. T. de Melo Neto,
S. Dixon,
J. C. D'Olivo,
J. Estrada,
G. Fernandez Moroni,
K. P. Hernández Torres,
F. Izraelevitch,
A. Kavner,
B. Kilminster,
I. Lawson,
J. Liao,
M. López,
J. Molina,
G. Moreno-Granados,
J. Pena,
P. Privitera
, et al. (9 additional authors not shown)
Abstract:
The DAMIC experiment uses fully depleted, high resistivity CCDs to search for dark matter particles. With an energy threshold $\sim$50 eV$_{ee}$, and excellent energy and spatial resolutions, the DAMIC CCDs are well-suited to identify and suppress radioactive backgrounds, having an unrivaled sensitivity to WIMPs with masses $<$6 GeV/$c^2$. Early results motivated the construction of a 100 g detect…
▽ More
The DAMIC experiment uses fully depleted, high resistivity CCDs to search for dark matter particles. With an energy threshold $\sim$50 eV$_{ee}$, and excellent energy and spatial resolutions, the DAMIC CCDs are well-suited to identify and suppress radioactive backgrounds, having an unrivaled sensitivity to WIMPs with masses $<$6 GeV/$c^2$. Early results motivated the construction of a 100 g detector, DAMIC100, currently being installed at SNOLAB. This contribution discusses the installation progress, new calibration efforts near the threshold, a preliminary result with 2014 data, and the prospects for physics results after one year of data taking.
△ Less
Submitted 8 December, 2015; v1 submitted 30 September, 2015;
originally announced October 2015.
-
Estimation of hysteretic losses for MgB2 tapes under the operating conditions of a generator
Authors:
Carlos Roberto Vargas-Llanos,
Víctor Manuel Rodríguez Zermeño,
Frederic Trillaud,
Francesco Grilli
Abstract:
Hysteretic losses in MgB2 wound superconducting coils of a 500 kW synchronous hybrid generator were estimated as part of the European project SUPRAPOWER led by the Spanish company Tecnalia Research and Innovation. Particular interest was given to the losses found in tapes in the superconducting rotor caused by the magnetic flux ripples originating from the conventional stator during nominal operat…
▽ More
Hysteretic losses in MgB2 wound superconducting coils of a 500 kW synchronous hybrid generator were estimated as part of the European project SUPRAPOWER led by the Spanish company Tecnalia Research and Innovation. Particular interest was given to the losses found in tapes in the superconducting rotor caused by the magnetic flux ripples originating from the conventional stator during nominal operation. To compute the losses, a 2D Finite Element Method was applied to solve the H-formulation of Maxwell's equations considering the nonlinear properties of both the superconducting material and its surrounding Ni matrix. To be able to model all the different turns composing the winding of the superconducting rotor coils, three geometrical models of single tape cross section of decreasing complexity were studied: 1) the first model reproduced closely the actual cross section obtained from micrographs, 2) the second model was obtained from the computed elastoplastic deformation of a round Ni wire, 3) the last model was based on a simplified elliptic cross section. The last geometry allowed validating the modeling technique by comparing numerical losses with results from well-established analytical expressions. Additionally, the following cases of filament transpositions were studied: no, partial and full transposition. Finally, choosing the right level of geometrical details to predict the expected behavior of individual superconducting tapes in the rotor, the following operational regimes were studied: Bias-DC current, ramping current under ramping background field, and magnetic flux ripples under DC background current and field.
△ Less
Submitted 6 September, 2015;
originally announced September 2015.
-
Measurement of radioactive contamination in the high-resistivity silicon CCDs of the DAMIC experiment
Authors:
A. Aguilar-Arevalo,
D. Amidei,
X. Bertou,
D. Bole,
M. Butner,
G. Cancelo,
A. Castañeda Vázquez,
A. E. Chavarria,
J. R. T. de Mello Neto,
S. Dixon,
J. C. D'Olivo,
J. Estrada,
G. Fernandez Moroni,
K. P. Hernández Torres,
F. Izraelevitch,
A. Kavner,
B. Kilminster,
I. Lawson,
J. Liao,
M. López,
J. Molina,
G. Moreno-Granados,
J. Pena,
P. Privitera,
Y. Sarkis
, et al. (8 additional authors not shown)
Abstract:
We present measurements of radioactive contamination in the high-resistivity silicon charge-coupled devices (CCDs) used by the DAMIC experiment to search for dark matter particles. Novel analysis methods, which exploit the unique spatial resolution of CCDs, were developed to identify $α$ and $β$ particles. Uranium and thorium contamination in the CCD bulk was measured through $α$ spectroscopy, wit…
▽ More
We present measurements of radioactive contamination in the high-resistivity silicon charge-coupled devices (CCDs) used by the DAMIC experiment to search for dark matter particles. Novel analysis methods, which exploit the unique spatial resolution of CCDs, were developed to identify $α$ and $β$ particles. Uranium and thorium contamination in the CCD bulk was measured through $α$ spectroscopy, with an upper limit on the $^{238}$U ($^{232}$Th) decay rate of 5 (15) kg$^{-1}$ d$^{-1}$ at 95% CL. We also searched for pairs of spatially correlated electron tracks separated in time by up to tens of days, as expected from $^{32}$Si-$^{32}$P or $^{210}$Pb-$^{210}$Bi sequences of $β$ decays. The decay rate of $^{32}$Si was found to be $80^{+110}_{-65}$ kg$^{-1}$ d$^{-1}$ (95% CI). An upper limit of $\sim$35 kg$^{-1}$ d$^{-1}$ (95% CL) on the $^{210}$Pb decay rate was obtained independently by $α$ spectroscopy and the $β$ decay sequence search. These levels of radioactive contamination are sufficiently low for the successful operation of CCDs in the forthcoming 100 g DAMIC detector.
△ Less
Submitted 9 July, 2015; v1 submitted 8 June, 2015;
originally announced June 2015.
-
DAMIC at SNOLAB
Authors:
Alvaro Chavarria,
Javier Tiffenberg,
Alexis Aguilar-Arevalo,
Dan Amidei,
Xavier Bertou,
Gustavo Cancelo,
Juan Carlos D'Olivo,
Juan Estrada,
Guillermo Fernandez Moroni,
Federico Izraelevitch,
Ben Kilminster,
Yashmanth Langisetty,
Junhui Liao,
Jorge Molina,
Paolo Privitera,
Carolina Salazar,
Youssef Sarkis,
Vic Scarpine,
Tom Schwarz,
Miguel Sofo Haro,
Frederic Trillaud,
Jing Zhou
Abstract:
We introduce the fully-depleted charge-coupled device (CCD) as a particle detector. We demonstrate its low energy threshold operation, capable of detecting ionizing energy depositions in a single pixel down to 50 eVee. We present results of energy calibrations from 0.3 keVee to 60 keVee, showing that the CCD is a fully active detector with uniform energy response throughout the silicon target, goo…
▽ More
We introduce the fully-depleted charge-coupled device (CCD) as a particle detector. We demonstrate its low energy threshold operation, capable of detecting ionizing energy depositions in a single pixel down to 50 eVee. We present results of energy calibrations from 0.3 keVee to 60 keVee, showing that the CCD is a fully active detector with uniform energy response throughout the silicon target, good resolution (Fano ~0.16), and remarkable linear response to electron energy depositions. We show the capability of the CCD to localize the depth of particle interactions within the silicon target. We discuss the mode of operation and unique imaging capabilities of the CCD, and how they may be exploited to characterize and suppress backgrounds. We present the first results from the deployment of 250 um thick CCDs in SNOLAB, a prototype for the upcoming DAMIC100. DAMIC100 will have a target mass of 0.1 kg and should be able to directly test the CDMS-Si signal within a year of operation.
△ Less
Submitted 30 June, 2014;
originally announced July 2014.
-
DAMIC: a novel dark matter experiment
Authors:
The DAMIC Collaboration,
Alexis A. Aguilar-Arevalo,
Xavier Bertou,
Melissa J. Butner,
Gustavo Cancelo,
Alvaro Chavarria,
Juan Carlos D'Olivo,
Juan Cruz Estrada Vigil,
Guillermo Fernandez Moroni,
Federico Izraelevitch,
Ben Kilminster,
Ian T. Lawson,
Fernando Marsal,
Jorge Molina,
Paolo Privitera,
Tom Schwarz,
Miguel Sofo Haro,
Javier Tiffenberg,
Frederic Trillaud,
Jing Zhou
Abstract:
DAMIC (Dark Matter in CCDs) is a novel dark matter experiment that has unique sensitivity to dark matter particles with masses below 10 GeV. Due to its low electronic readout noise (R.M.S. ~3 e-) this instrument is able to reach a detection threshold below 0.5 keV nuclear recoil energy, making the search for dark matter particles with low masses possible. We report on early results and experience…
▽ More
DAMIC (Dark Matter in CCDs) is a novel dark matter experiment that has unique sensitivity to dark matter particles with masses below 10 GeV. Due to its low electronic readout noise (R.M.S. ~3 e-) this instrument is able to reach a detection threshold below 0.5 keV nuclear recoil energy, making the search for dark matter particles with low masses possible. We report on early results and experience gained from a detector that has been running at SNOLAB from Dec 2012. We also discuss the measured and expected backgrounds and present the plan for future detectors to be installed in 2014.
△ Less
Submitted 24 October, 2013;
originally announced October 2013.
-
An evaluation of the exposure in nadir observation of the JEM-EUSO mission
Authors:
J. H. Adams,
S. Ahmad,
J. -N. Albert,
D. Allard,
M. Ambrosio,
L. Anchordoqui,
A. Anzalone,
Y. Arai,
C. Aramo,
K. Asano,
M. Ave,
P. Barrillon,
T. Batsch,
J. Bayer,
T. Belenguer,
R. Bellotti,
A. A. Berlind,
M. Bertaina,
P. L. Biermann,
S. Biktemerova,
C. Blaksley,
J. Blecki,
S. Blin-Bondil,
J. Bluemer,
P. Bobik
, et al. (236 additional authors not shown)
Abstract:
We evaluate the exposure during nadir observations with JEM-EUSO, the Extreme Universe Space Observatory, on-board the Japanese Experiment Module of the International Space Station. Designed as a mission to explore the extreme energy Universe from space, JEM-EUSO will monitor the Earth's nighttime atmosphere to record the ultraviolet light from tracks generated by extensive air showers initiated b…
▽ More
We evaluate the exposure during nadir observations with JEM-EUSO, the Extreme Universe Space Observatory, on-board the Japanese Experiment Module of the International Space Station. Designed as a mission to explore the extreme energy Universe from space, JEM-EUSO will monitor the Earth's nighttime atmosphere to record the ultraviolet light from tracks generated by extensive air showers initiated by ultra-high energy cosmic rays. In the present work, we discuss the particularities of space-based observation and we compute the annual exposure in nadir observation. The results are based on studies of the expected trigger aperture and observational duty cycle, as well as, on the investigations of the effects of clouds and different types of background light. We show that the annual exposure is about one order of magnitude higher than those of the presently operating ground-based observatories.
△ Less
Submitted 11 May, 2013;
originally announced May 2013.
-
The JEM-EUSO Mission: Status and Prospects in 2011
Authors:
The JEM-EUSO Collaboration,
:,
J. H. Adams Jr,
S. Ahmad,
J. -N. Albert,
D. Allard,
M. Ambrosio,
L. Anchordoqui,
A. Anzalone,
Y. Arai,
C. Aramo,
K. Asano,
P. Barrillon,
T. Batsch,
J. Bayer,
T. Belenguer,
R. Bellotti,
A. A. Berlind,
M. Bertaina,
P. L. Biermann,
S. Biktemerova,
C. Blaksley,
J. Blecki,
S. Blin-Bondil,
J. Bluemer
, et al. (235 additional authors not shown)
Abstract:
Contributions of the JEM-EUSO Collaboration to the 32nd International Cosmic Ray Conference, Beijing, August, 2011.
Contributions of the JEM-EUSO Collaboration to the 32nd International Cosmic Ray Conference, Beijing, August, 2011.
△ Less
Submitted 23 April, 2012;
originally announced April 2012.