Showing 1–50 of 73 results for author: Spiropulu, M

High Energy Particle Detection with Large Area Superconducting Microwire Array

Authors: Cristián Peña, Christina Wang, Si Xie, Adolf Bornheim, Matías Barría, Claudio San Martín, Valentina Vega, Artur Apresyan, Emanuel Knehr, Boris Korzh, Lautaro Narváez, Sahil Patel, Matthew Shaw, Maria Spiropulu

Abstract: We present the first detailed study of an 8-channel $2\times2$ mm$^{2}$ WSi superconducting microwire single photon detector (SMSPD) array exposed to 120 GeV proton beam and 8 GeV electron and pion beam at the Fermilab Test Beam Facility. The SMSPD detection efficiency was measured for the first time for protons, electrons, and pions, enabled by the use of a silicon tracking telescope that provide… ▽ More We present the first detailed study of an 8-channel $2\times2$ mm$^{2}$ WSi superconducting microwire single photon detector (SMSPD) array exposed to 120 GeV proton beam and 8 GeV electron and pion beam at the Fermilab Test Beam Facility. The SMSPD detection efficiency was measured for the first time for protons, electrons, and pions, enabled by the use of a silicon tracking telescope that provided precise spatial resolution of 30 $μ$m for 120 GeV protons and 130 $μ$m for 8 GeV electrons and pions. The result demonstrated consistent detection efficiency across pixels and at different bias currents. Time resolution of 1.15 ns was measured for the first time for SMSPD with proton, electron, and pions, enabled by the use of an MCP-PMT which provided a ps-level reference time stamp. The results presented is the first step towards developing SMSPD array systems optimized for high energy particle detection and identification for future accelerator-based experiments. △ Less

Submitted 30 September, 2024; originally announced October 2024.

Free-space quantum information platform on a chip

Authors: Volkan Gurses, Samantha I. Davis, Neil Sinclair, Maria Spiropulu, Ali Hajimiri

Abstract: Emerging technologies that employ quantum physics offer fundamental enhancements in information processing tasks, including sensing, communications, and computing. Here, we introduce the quantum phased array, which generalizes the operating principles of phased arrays and wavefront engineering to quantum fields, and report the first quantum phased array technology demonstration. An integrated phot… ▽ More Emerging technologies that employ quantum physics offer fundamental enhancements in information processing tasks, including sensing, communications, and computing. Here, we introduce the quantum phased array, which generalizes the operating principles of phased arrays and wavefront engineering to quantum fields, and report the first quantum phased array technology demonstration. An integrated photonic-electronic system is used to manipulate free-space quantum information to establish reconfigurable wireless quantum links in a standalone, compact form factor. Such a robust, scalable, and integrated quantum platform can enable broad deployment of quantum technologies with high connectivity, potentially expanding their use cases to real-world applications. We report the first, to our knowledge, free-space-to-chip interface for quantum links, enabled by 32 metamaterial antennas with more than 500,000 sub-wavelength engineered nanophotonic elements over a 550 x 550 $\mathrm{μm}^2$ physical aperture. We implement a 32-channel array of quantum coherent receivers with 30.3 dB shot noise clearance and 90.2 dB common-mode rejection ratio that downconverts the quantum optical information via homodyne detection and processes it coherently in the radio-frequency domain. With our platform, we demonstrate 32-pixel imaging of squeezed light for quantum sensing, reconfigurable free-space links for quantum communications, and proof-of-concept entanglement generation for measurement-based quantum computing. This approach offers targeted, real-time, dynamically-adjustable free-space capabilities to integrated quantum systems that can enable wireless quantum technologies. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Long-range wormhole teleportation

Authors: Joseph D. Lykken, Daniel Jafferis, Alexander Zlokapa, David K. Kolchmeyer, Samantha I. Davis, Hartmut Neven, Maria Spiropulu

Abstract: We extend the protocol of Gao and Jafferis arXiv:1911.07416 to allow wormhole teleportation between two entangled copies of the Sachdev-Ye-Kitaev (SYK) model communicating only through a classical channel. We demonstrate in finite $N$ simulations that the protocol exhibits the characteristic holographic features of wormhole teleportation discussed and summarized in Jafferis et al. https://www.natu… ▽ More We extend the protocol of Gao and Jafferis arXiv:1911.07416 to allow wormhole teleportation between two entangled copies of the Sachdev-Ye-Kitaev (SYK) model communicating only through a classical channel. We demonstrate in finite $N$ simulations that the protocol exhibits the characteristic holographic features of wormhole teleportation discussed and summarized in Jafferis et al. https://www.nature.com/articles/s41586-022-05424-3 . We review and exhibit in detail how these holographic features relate to size winding which, as first shown by Brown et al. arXiv:1911.06314 and Nezami et al. arXiv:2102.01064, encodes a dual description of wormhole teleportation. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 52 pages, 24 figures, for submission to PRX Quantum

Report number: FERMILAB-PUB-24-0184-ETD, CaltechAUTHORS:0b9qh-jt654

Gradient-based Automatic Mixed Precision Quantization for Neural Networks On-Chip

Authors: Chang Sun, Thea K. Årrestad, Vladimir Loncar, Jennifer Ngadiuba, Maria Spiropulu

Abstract: Model size and inference speed at deployment time, are major challenges in many deep learning applications. A promising strategy to overcome these challenges is quantization. However, a straightforward uniform quantization to very low precision can result in significant accuracy loss. Mixed-precision quantization, based on the idea that certain parts of the network can accommodate lower precision… ▽ More Model size and inference speed at deployment time, are major challenges in many deep learning applications. A promising strategy to overcome these challenges is quantization. However, a straightforward uniform quantization to very low precision can result in significant accuracy loss. Mixed-precision quantization, based on the idea that certain parts of the network can accommodate lower precision without compromising performance compared to other parts, offers a potential solution. In this work, we present High Granularity Quantization (HGQ), an innovative quantization-aware training method that could fine-tune the per-weight and per-activation precision by making them optimizable through gradient descent. This approach enables ultra-low latency and low power neural networks on hardware capable of performing arithmetic operations with an arbitrary number of bits, such as FPGAs and ASICs. We demonstrate that HGQ can outperform existing methods by a substantial margin, achieving resource reduction by up to a factor of 20 and latency improvement by a factor of 5 while preserving accuracy. △ Less

Submitted 8 August, 2024; v1 submitted 1 May, 2024; originally announced May 2024.

Comments: Fixed some errors and added more details

Report number: FERMILAB-PUB-24-0213-CMS, CaltechAUTHORS:10.7907/hq8jd-rhg30

Fast Particle-based Anomaly Detection Algorithm with Variational Autoencoder

Authors: Ryan Liu, Abhijith Gandrakota, Jennifer Ngadiuba, Maria Spiropulu, Jean-Roch Vlimant

Abstract: Model-agnostic anomaly detection is one of the promising approaches in the search for new beyond the standard model physics. In this paper, we present Set-VAE, a particle-based variational autoencoder (VAE) anomaly detection algorithm. We demonstrate a 2x signal efficiency gain compared with traditional subjettiness-based jet selection. Furthermore, with an eye to the future deployment to trigger… ▽ More Model-agnostic anomaly detection is one of the promising approaches in the search for new beyond the standard model physics. In this paper, we present Set-VAE, a particle-based variational autoencoder (VAE) anomaly detection algorithm. We demonstrate a 2x signal efficiency gain compared with traditional subjettiness-based jet selection. Furthermore, with an eye to the future deployment to trigger systems, we propose the CLIP-VAE, which reduces the inference-time cost of anomaly detection by using the KL-divergence loss as the anomaly score, resulting in a 2x acceleration in latency and reducing the caching requirement. △ Less

Submitted 28 November, 2023; originally announced November 2023.

Comments: 7 pages, 4 figures, accepted at the Machine Learning and the Physical Sciences Workshop, NeurIPS 2023

Report number: FERMILAB-PUB-23-749-CMS

Efficient and Robust Jet Tagging at the LHC with Knowledge Distillation

Authors: Ryan Liu, Abhijith Gandrakota, Jennifer Ngadiuba, Maria Spiropulu, Jean-Roch Vlimant

Abstract: The challenging environment of real-time data processing systems at the Large Hadron Collider (LHC) strictly limits the computational complexity of algorithms that can be deployed. For deep learning models, this implies that only models with low computational complexity that have weak inductive bias are feasible. To address this issue, we utilize knowledge distillation to leverage both the perform… ▽ More The challenging environment of real-time data processing systems at the Large Hadron Collider (LHC) strictly limits the computational complexity of algorithms that can be deployed. For deep learning models, this implies that only models with low computational complexity that have weak inductive bias are feasible. To address this issue, we utilize knowledge distillation to leverage both the performance of large models and the reduced computational complexity of small ones. In this paper, we present an implementation of knowledge distillation, demonstrating an overall boost in the student models' performance for the task of classifying jets at the LHC. Furthermore, by using a teacher model with a strong inductive bias of Lorentz symmetry, we show that we can induce the same inductive bias in the student model which leads to better robustness against arbitrary Lorentz boost. △ Less

Submitted 23 November, 2023; originally announced November 2023.

Comments: 7 pages, 3 figures, accepted at the Machine Learning and the Physical Sciences Workshop, NeurIPS 2023

Report number: FERMILAB-PUB-23-748-CMS

Quantum Sensors for High Energy Physics

Authors: Aaron Chou, Kent Irwin, Reina H. Maruyama, Oliver K. Baker, Chelsea Bartram, Karl K. Berggren, Gustavo Cancelo, Daniel Carney, Clarence L. Chang, Hsiao-Mei Cho, Maurice Garcia-Sciveres, Peter W. Graham, Salman Habib, Roni Harnik, J. G. E. Harris, Scott A. Hertel, David B. Hume, Rakshya Khatiwada, Timothy L. Kovachy, Noah Kurinsky, Steve K. Lamoreaux, Konrad W. Lehnert, David R. Leibrandt, Dale Li, Ben Loer , et al. (17 additional authors not shown)

Abstract: Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Sta… ▽ More Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Standard Model itself including the Strong CP problem in QCD. Resulting experimental needs typically involve the measurement of very low energy impulses or low power periodic signals that are normally buried under large backgrounds. This report documents the findings of the 2023 Quantum Sensors for High Energy Physics workshop which identified enabling quantum information science technologies that could be utilized in future particle physics experiments, targeting high energy physics science goals. △ Less

Submitted 3 November, 2023; originally announced November 2023.

Comments: 63 pages, 8 figures, Quantum Sensors for HEP workshop report, April 26-28, 2023

Experimental high-dimensional entanglement certification and quantum steering with time-energy measurements

Authors: Kai-Chi Chang, Murat Can Sarihan, Xiang Cheng, Paul Erker, Andrew Mueller, Maria Spiropulu, Matthew D. Shaw, Boris Korzh, Marcus Huber, Chee Wei Wong

Abstract: High-dimensional entanglement provides unique ways of transcending the limitations of current approaches in quantum information processing, quantum communications based on qubits. The generation of time-frequency qudit states offer significantly increased quantum capacities while keeping the number of photons constant, but pose significant challenges regarding the possible measurements for certifi… ▽ More High-dimensional entanglement provides unique ways of transcending the limitations of current approaches in quantum information processing, quantum communications based on qubits. The generation of time-frequency qudit states offer significantly increased quantum capacities while keeping the number of photons constant, but pose significant challenges regarding the possible measurements for certification of entanglement. Here, we develop a new scheme and experimentally demonstrate the certification of 24-dimensional entanglement and a 9-dimensional quantum steering. We then subject our photon-pairs to dispersion conditions equivalent to the transmission through 600-km of fiber and still certify 21-dimensional entanglement. Furthermore, we use a steering inequality to prove 7-dimensional entanglement in a semi-device independent manner, proving that large chromatic dispersion is not an obstacle in distributing and certifying high-dimensional entanglement and quantum steering. Our highly scalable scheme is based on commercial telecommunication optical fiber components and recently developed low-jitter high-efficiency single-photon detectors, thus opening new pathways towards advanced large-scale quantum information processing and high-performance, noise-tolerant quantum communications with time-energy measurements △ Less

Submitted 31 October, 2023; originally announced October 2023.

Comments: 30 pages, 4 figures

High-rate multiplexed entanglement source based on time-bin qubits for advanced quantum networks

Authors: Andrew Mueller, Samantha Davis, Boris Korzh, Raju Valivarthi, Andrew D. Beyer, Rahaf Youssef, Neil Sinclair, Cristián Peña, Matthew D. Shaw, Maria Spiropulu

Abstract: Entanglement distribution based on time-bin qubits is an attractive option for emerging quantum networks. We demonstrate a 4.09 GHz repetition rate source of photon pairs entangled across early and late time bins separated by 80 ps. Simultaneous high rates and high visibilities are achieved through frequency multiplexing the spontaneous parametric down conversion output into 8 time-bin entangled p… ▽ More Entanglement distribution based on time-bin qubits is an attractive option for emerging quantum networks. We demonstrate a 4.09 GHz repetition rate source of photon pairs entangled across early and late time bins separated by 80 ps. Simultaneous high rates and high visibilities are achieved through frequency multiplexing the spontaneous parametric down conversion output into 8 time-bin entangled pairs. We demonstrate entanglement visibilities as high as 99.4%, total entanglement rates up to 3.55e6 coincidences/s, and predict a straightforward path towards achieving up to an order of magnitude improvement in rates without compromising visibility. Finally, we resolve the density matrices of the entangled states for each multiplexed channel and express distillable entanglement rates in ebit/s, thereby quantifying the tradeoff between visibility and coincidence rates that contributes to useful entanglement distribution. This source is a fundamental building block for high-rate entanglement-based quantum key distribution systems or advanced quantum networks. △ Less

Submitted 12 February, 2024; v1 submitted 3 October, 2023; originally announced October 2023.

High-dimensional time-frequency entanglement in a singly-filtered biphoton frequency comb

Authors: Xiang Cheng, Kai-Chi Chang, Murat Can Sarihan, Andrew Mueller, Maria Spiropulu, Matthew D. Shaw, Boris Korzh, Andrei Faraon, Franco N. C. Wong, Jeffrey H. Shapiro, Chee Wei Wong

Abstract: High-dimensional quantum entanglement is a cornerstone for advanced technology enabling large-scale noise-tolerant quantum systems, fault-tolerant quantum computing, and distributed quantum networks. The recently developed biphoton frequency comb (BFC) provides a powerful platform for high-dimensional quantum information processing in its spectral and temporal quantum modes. Here we propose and ge… ▽ More High-dimensional quantum entanglement is a cornerstone for advanced technology enabling large-scale noise-tolerant quantum systems, fault-tolerant quantum computing, and distributed quantum networks. The recently developed biphoton frequency comb (BFC) provides a powerful platform for high-dimensional quantum information processing in its spectral and temporal quantum modes. Here we propose and generate a singly-filtered high-dimensional BFC via spontaneous parametric down-conversion by spectrally shaping only the signal photons with a Fabry-Perot cavity. High-dimensional energy-time entanglement is verified through Franson-interference recurrences and temporal correlation with low-jitter detectors. Frequency- and temporal- entanglement of our singly-filtered BFC is then quantified by Schmidt mode decomposition. Subsequently, we distribute the high-dimensional singly-filtered BFC state over a 10 km fiber link with a post-distribution time-bin dimension lower bounded to be at least 168. Our demonstrations of high-dimensional entanglement and entanglement distribution show the capability of the singly-filtered quantum frequency comb for high-efficiency quantum information processing and high-capacity quantum networks. △ Less

Submitted 11 September, 2023; v1 submitted 11 September, 2023; originally announced September 2023.

Comments: 30 pages, 4 figures

Entangled Photon Pair Source Demonstrator using the Quantum Instrumentation Control Kit System

Authors: Si Xie, Leandro Stefanazzi, Christina Wang, Cristian Pena, Raju Valivarthi, Lautaro Narvaez, Gustavo Cancelo, Keshav Kapoor, Boris Korzh, Matthew Shaw, Panagiotis Spentzouris, Maria Spiropulu

Abstract: We report the first demonstration of using the Quantum Instrumentation and Control Kit (QICK) system on RFSoCFPGA technology to drive an entangled photon pair source and to detect the photon signals. With the QICK system, we achieve high levels of performance metrics including coincidence-to-accidental ratio exceeding 150, and entanglement visibility exceeding 95%, consistent with performance metr… ▽ More We report the first demonstration of using the Quantum Instrumentation and Control Kit (QICK) system on RFSoCFPGA technology to drive an entangled photon pair source and to detect the photon signals. With the QICK system, we achieve high levels of performance metrics including coincidence-to-accidental ratio exceeding 150, and entanglement visibility exceeding 95%, consistent with performance metrics achieved using conventional waveform generators. We also demonstrate simultaneous detector readout using the digitization functional of QICK, achieving internal system synchronization time resolution of 3.2 ps. The work reported in this paper represents an explicit demonstration of the feasibility for replacing commercial waveform generators and time taggers with RFSoC-FPGA technology in the operation of a quantum network, representing a cost reduction of more than an order of magnitude. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Report number: FERMILAB-PUB-23-118-LDRD-QIS

Comment on "Comment on "Traversable wormhole dynamics on a quantum processor" "

Authors: Daniel Jafferis, Alexander Zlokapa, Joseph D. Lykken, David K. Kolchmeyer, Samantha I. Davis, Nikolai Lauk, Hartmut Neven, Maria Spiropulu

Abstract: We observe that the comment of [1, arXiv:2302.07897] is consistent with [2] on key points: i) the microscopic mechanism of the experimentally observed teleportation is size winding and ii) the system thermalizes and scrambles at the time of teleportation. These properties are consistent with a gravitational interpretation of the teleportation dynamics, as opposed to the late-time dynamics. The obj… ▽ More We observe that the comment of [1, arXiv:2302.07897] is consistent with [2] on key points: i) the microscopic mechanism of the experimentally observed teleportation is size winding and ii) the system thermalizes and scrambles at the time of teleportation. These properties are consistent with a gravitational interpretation of the teleportation dynamics, as opposed to the late-time dynamics. The objections of [1] concern counterfactual scenarios outside of the experimentally implemented protocol. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Comments: 5 pages, 4 figures

Large active-area superconducting microwire detector array with single-photon sensitivity in the near-infrared

Authors: Jamie S. Luskin, Ekkehart Schmidt, Boris Korzh, Andrew D. Beyer, Bruce Bumble, Jason P. Allmaras, Alexander B. Walter, Emma E. Wollman, Lautaro Narváez, Varun B. Verma, Sae Woo Nam, Ilya Charaev, Marco Colangelo, Karl K. Berggren, Cristián Peña, Maria Spiropulu, Maurice Garcia-Sciveres, Stephen Derenzo, Matthew D. Shaw

Abstract: Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experime… ▽ More Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experiments. We present 8-pixel $1 mm^2$ superconducting microwire single photon detectors (SMSPDs) with $1\,\mathrm{μm}$-wide wires fabricated from WSi and MoSi films of various stoichiometries using electron-beam and optical lithography. Devices made from all materials and fabrication techniques show saturated internal detection efficiency at 1064 nm in at least one pixel, and the best performing device made from silicon-rich WSi shows single-photon sensitivity in all 8 pixels and saturated internal detection efficiency in 6/8 pixels. This detector is the largest reported active-area SMSPD or SNSPD with near-IR sensitivity published to date, and the first report of an SMSPD array. By further optimizing the photolithography techniques presented in this work, a viable pathway exists to realize larger devices with $cm^2$-scale active area and beyond. △ Less

Submitted 19 March, 2023; originally announced March 2023.

High-speed detection of 1550 nm single photons with superconducting nanowire detectors

Authors: Ioana Craiciu, Boris Korzh, Andrew D. Beyer, Andrew Mueller, Jason P. Allmaras, Lautaro Narváez, Maria Spiropulu, Bruce Bumble, Thomas Lehner, Emma E. Wollman, Matthew D. Shaw

Abstract: Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-cou… ▽ More Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-counts/s at 3 dB compression. The PEACOQ detector (Performance-Enhanced Array for Counting Optical Quanta) comprises a linear array of 32 straight superconducting niobium nitride nanowires which span the mode of an optical fiber. This design supports high count rates with minimal penalties for detection efficiency and timing jitter. We show how these trade-offs can be mitigated by implementing independent read-out for each nanowire and by using a temporal walk correction technique to reduce count-rate dependent timing jitter. These detectors make quantum communication practical on a 10 GHz clock. △ Less

Submitted 20 October, 2022; originally announced October 2022.

Comments: 12 pages, 4 figures

Time-walk and jitter correction in SNSPDs at high count rates

Authors: Andrew Mueller, Emma E. Wollman, Boris Korzh, Andrew D. Beyer, Lautaro Narvaez, Ryan Rogalin, Maria Spiropulu, Matthew D. Shaw

Abstract: Superconducting nanowire single-photon detectors (SNSPDs) are a leading detector type for time correlated single photon counting, especially in the near-infrared. When operated at high count rates, SNSPDs exhibit increased timing jitter caused by internal device properties and features of the RF amplification chain. Variations in RF pulse height and shape lead to variations in the latency of timin… ▽ More Superconducting nanowire single-photon detectors (SNSPDs) are a leading detector type for time correlated single photon counting, especially in the near-infrared. When operated at high count rates, SNSPDs exhibit increased timing jitter caused by internal device properties and features of the RF amplification chain. Variations in RF pulse height and shape lead to variations in the latency of timing measurements. To compensate for this, we demonstrate a calibration method that correlates delays in detection events with the time elapsed between pulses. The increase in jitter at high rates can be largely canceled in software by applying corrections derived from the calibration process. We demonstrate our method with a single-pixel tungsten silicide SNSPD and show it decreases high count rate jitter. The technique is especially effective at removing a long tail that appears in the instrument response function at high count rates. At a count rate of 11.4 MCounts/s we reduce the full width at one percent maximum level (FW1%M) by 45%. The method therefore enables certain quantum communication protocols that are rate-limited by the (FW1%M) metric to operate almost twice as fast. \c{opyright} 2022. All rights reserved. △ Less

Submitted 3 October, 2022; originally announced October 2022.

Comments: 5 pages, 3 figures

Picosecond Synchronization of Photon Pairs through a Fiber Link between Fermilab and Argonne National Laboratories

Authors: Keshav Kapoor, Si Xie, Joaquin Chung, Raju Valivarthi, Cristián Peña, Lautaro Narváez, Neil Sinclair, Jason P. Allmaras, Andrew D. Beyer, Samantha I. Davis, Gabriel Fabre, George Iskander, Gregory S. Kanter, Rajkumar Kettimuthu, Boris Korzh, Prem Kumar, Nikolai Lauk, Andrew Mueller, Matthew Shaw, Panagiotis Spentzouris, Maria Spiropulu, Jordan M. Thomas, Emma E. Wollman

Abstract: We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-t… ▽ More We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-to-accidental ratio (CAR) of the C-band pairs from 51 $\pm$ 2 to 5.3 $\pm$ 0.4 due to Raman scattering of the O-band clock pulses. Despite this reduction, the CAR is nevertheless suitable for quantum networks. △ Less

Submitted 2 August, 2022; originally announced August 2022.

Design and Implementation of the Illinois Express Quantum Metropolitan Area Network

Authors: Joaquin Chung, Ely M. Eastman, Gregory S. Kanter, Keshav Kapoor, Nikolai Lauk, Cristián Peña, Robert Plunkett, Neil Sinclair, Jordan M. Thomas, Raju Valivarthi, Si Xie, Rajkumar Kettimuthu, Prem Kumar, Panagiotis Spentzouris, Maria Spiropulu

Abstract: The Illinois Express Quantum Network (IEQNET) is a program to realize metropolitan scale quantum networking over deployed optical fiber using currently available technology. IEQNET consists of multiple sites that are geographically dispersed in the Chicago metropolitan area. Each site has one or more quantum nodes (Q-nodes) representing the communication parties in a quantum network. Q-nodes gener… ▽ More The Illinois Express Quantum Network (IEQNET) is a program to realize metropolitan scale quantum networking over deployed optical fiber using currently available technology. IEQNET consists of multiple sites that are geographically dispersed in the Chicago metropolitan area. Each site has one or more quantum nodes (Q-nodes) representing the communication parties in a quantum network. Q-nodes generate or measure quantum signals such as entangled photons and communicate the measurement results via standard, classical signals and conventional networking processes. The entangled photons in IEQNET nodes are generated at multiple wavelengths, and are selectively distributed to the desired users via transparent optical switches. Here we describe the network architecture of IEQNET, including the Internet-inspired layered hierarchy that leverages software-defined networking (SDN) technology to perform traditional wavelength routing and assignment between the Q-nodes. Specifically, SDN decouples the control and data planes, with the control plane being entirely implemented in the classical domain. We also discuss the IEQNET processes that address issues associated with synchronization, calibration, network monitoring, and scheduling. An important goal of IEQNET is to demonstrate the extent to which the control plane classical signals can co-propagate with the data plane quantum signals in the same fiber lines (quantum-classical signal "coexistence"). This goal is furthered by the use of tunable narrow-band optical filtering at the receivers and, at least in some cases, a wide wavelength separation between the quantum and classical channels. We envision IEQNET to aid in developing robust and practical quantum networks by demonstrating metro-scale quantum communication tasks such as entanglement distribution and quantum-state teleportation. △ Less

Submitted 7 November, 2022; v1 submitted 19 July, 2022; originally announced July 2022.

Comments: 20 pages, 11 figures. arXiv admin note: text overlap with arXiv:2111.10256

Quantum Networks for High Energy Physics

Authors: Andrei Derevianko, Eden Figueroa, Julián MartÍnez-Rincón, Inder Monga, Andrei Nomerotski, Cristián H. Peña, Nicholas A. Peters, Raphael Pooser, Nageswara Rao, Anze Slosar, Panagiotis Spentzouris, Maria Spiropulu, Paul Stankus, Wenji Wu, Si Xie

Abstract: Quantum networks of quantum objects promise to be exponentially more powerful than the objects considered independently. To live up to this promise will require the development of error mitigation and correction strategies to preserve quantum information as it is initialized, stored, transported, utilized, and measured. The quantum information could be encoded in discrete variables such as qubits,… ▽ More Quantum networks of quantum objects promise to be exponentially more powerful than the objects considered independently. To live up to this promise will require the development of error mitigation and correction strategies to preserve quantum information as it is initialized, stored, transported, utilized, and measured. The quantum information could be encoded in discrete variables such as qubits, in continuous variables, or anything in-between. Quantum computational networks promise to enable simulation of physical phenomena of interest to the HEP community. Quantum sensor networks promise new measurement capability to test for new physics and improve upon existing measurements of fundamental constants. Such networks could exist at multiple scales from the nano-scale to a global-scale quantum network. △ Less

Submitted 31 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Reconstruction of Large Radius Tracks with the Exa.TrkX pipeline

Authors: Chun-Yi Wang, Xiangyang Ju, Shih-Chieh Hsu, Daniel Murnane, Paolo Calafiura, Steven Farrell, Maria Spiropulu, Jean-Roch Vlimant, Adam Aurisano, V Hewes, Giuseppe Cerati, Lindsey Gray, Thomas Klijnsma, Jim Kowalkowski, Markus Atkinson, Mark Neubauer, Gage DeZoort, Savannah Thais, Alexandra Ballow, Alina Lazar, Sylvain Caillou, Charline Rougier, Jan Stark, Alexis Vallier, Jad Sardain

Abstract: Particle tracking is a challenging pattern recognition task at the Large Hadron Collider (LHC) and the High Luminosity-LHC. Conventional algorithms, such as those based on the Kalman Filter, achieve excellent performance in reconstructing the prompt tracks from the collision points. However, they require dedicated configuration and additional computing time to efficiently reconstruct the large rad… ▽ More Particle tracking is a challenging pattern recognition task at the Large Hadron Collider (LHC) and the High Luminosity-LHC. Conventional algorithms, such as those based on the Kalman Filter, achieve excellent performance in reconstructing the prompt tracks from the collision points. However, they require dedicated configuration and additional computing time to efficiently reconstruct the large radius tracks created away from the collision points. We developed an end-to-end machine learning-based track finding algorithm for the HL-LHC, the Exa.TrkX pipeline. The pipeline is designed so as to be agnostic about global track positions. In this work, we study the performance of the Exa.TrkX pipeline for finding large radius tracks. Trained with all tracks in the event, the pipeline simultaneously reconstructs prompt tracks and large radius tracks with high efficiencies. This new capability offered by the Exa.TrkX pipeline may enable us to search for new physics in real time. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: 5 pages, 3 figures. Proceedings of 20th International Workshop on Advanced Computing and Analysis Techniques in Physics Research

Picosecond synchronization system for quantum networks

Authors: Raju Valivarthi, Lautaro Narváez, Samantha I. Davis, Nikolai Lauk, Cristián Peña, Si Xie, Jason P. Allmaras, Andrew D. Beyer, Boris Korzh, Andrew Mueller, Mandy Rominsky, Matthew Shaw, Emma E. Wollman, Panagiotis Spentzouris, Daniel Oblak, Neil Sinclair, Maria Spiropulu

Abstract: The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system… ▽ More The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system with ps-scale timing resolution. Synchronization of the photons is achieved by distributing O-band-wavelength laser pulses between network nodes. Specifically, we distribute photon pairs between three nodes, and measure a reduction of coincidence-to-accidental ratio from 77 to only 42 when the synchronization system is enabled, which permits high-fidelity qubit transmission. Our demonstration sheds light on the role of noise in quantum communication and represents a key step in realizing deployed co-existing classical-quantum networks. △ Less

Submitted 6 March, 2022; originally announced March 2022.

Comments: 7 pages, 7 figures

Accelerating the Inference of the Exa.TrkX Pipeline

Authors: Alina Lazar, Xiangyang Ju, Daniel Murnane, Paolo Calafiura, Steven Farrell, Yaoyuan Xu, Maria Spiropulu, Jean-Roch Vlimant, Giuseppe Cerati, Lindsey Gray, Thomas Klijnsma, Jim Kowalkowski, Markus Atkinson, Mark Neubauer, Gage DeZoort, Savannah Thais, Shih-Chieh Hsu, Adam Aurisano, V Hewes, Alexandra Ballow, Nirajan Acharya, Chun-yi Wang, Emma Liu, Alberto Lucas

Abstract: Recently, graph neural networks (GNNs) have been successfully used for a variety of particle reconstruction problems in high energy physics, including particle tracking. The Exa.TrkX pipeline based on GNNs demonstrated promising performance in reconstructing particle tracks in dense environments. It includes five discrete steps: data encoding, graph building, edge filtering, GNN, and track labelin… ▽ More Recently, graph neural networks (GNNs) have been successfully used for a variety of particle reconstruction problems in high energy physics, including particle tracking. The Exa.TrkX pipeline based on GNNs demonstrated promising performance in reconstructing particle tracks in dense environments. It includes five discrete steps: data encoding, graph building, edge filtering, GNN, and track labeling. All steps were written in Python and run on both GPUs and CPUs. In this work, we accelerate the Python implementation of the pipeline through customized and commercial GPU-enabled software libraries, and develop a C++ implementation for inferencing the pipeline. The implementation features an improved, CUDA-enabled fixed-radius nearest neighbor search for graph building and a weakly connected component graph algorithm for track labeling. GNNs and other trained deep learning models are converted to ONNX and inferenced via the ONNX Runtime C++ API. The complete C++ implementation of the pipeline allows integration with existing tracking software. We report the memory usage and average event latency tracking performance of our implementation applied to the TrackML benchmark dataset. △ Less

Submitted 14 February, 2022; originally announced February 2022.

Comments: Proceedings submission to ACAT2021 Conference, 7 pages

Improved heralded single-photon source with a photon-number-resolving superconducting nanowire detector

Authors: Samantha I. Davis, Andrew Mueller, Raju Valivarthi, Nikolai Lauk, Lautaro Narvaez, Boris Korzh, Andrew D. Beyer, Marco Colangelo, Karl K. Berggren, Matthew D. Shaw, Neil Sinclair, Maria Spiropulu

Abstract: Deterministic generation of single photons is essential for many quantum information technologies. A bulk optical nonlinearity emitting a photon pair, where the measurement of one of the photons heralds the presence of the other, is commonly used with the caveat that the single-photon emission rate is constrained due to a trade-off between multiphoton events and pair emission rate. Using an effici… ▽ More Deterministic generation of single photons is essential for many quantum information technologies. A bulk optical nonlinearity emitting a photon pair, where the measurement of one of the photons heralds the presence of the other, is commonly used with the caveat that the single-photon emission rate is constrained due to a trade-off between multiphoton events and pair emission rate. Using an efficient and low noise photon-number-resolving superconducting nanowire detector we herald, in real time, a single photon at telecommunication wavelength. We perform a second-order photon correlation $g^{2}(0)$ measurement of the signal mode conditioned on the measured photon number of the idler mode for various pump powers and demonstrate an improvement of a heralded single-photon source. We develop an analytical model using a phase-space formalism that encompasses all multiphoton effects and relevant imperfections, such as loss and multiple Schmidt modes. We perform a maximum-likelihood fit to test the agreement of the model to the data and extract the best-fit mean photon number $μ$ of the pair source for each pump power. A maximum reduction of $0.118 \pm 0.012$ in the photon $g^{2}(0)$ correlation function at $μ= 0.327 \pm 0.007$ is obtained, indicating a strong suppression of multiphoton emissions. For a fixed $g^{2}(0) = 7e-3$, we increase the single pair generation probability by 25%. Our experiment, built using fiber-coupled and off-the-shelf components, delineates a path to engineering ideal sources of single photons. △ Less

Submitted 8 January, 2023; v1 submitted 21 December, 2021; originally announced December 2021.

Comments: Model and analysis integrated into main text. Corrected equations. 17 pages, 11 figures

Journal ref: Physical Review Applied 18.6 (2022): 064007

Illinois Express Quantum Network for Distributing and Controlling Entanglement on Metro-Scale

Authors: Wenji Wu, Joaquin Chung, Gregory Kanter, Nikolai Lauk, Raju Valivarthi, Russell R. Ceballos, Cristin Pena, Neil Sinclair, Jordan M. Thomas, Ely M. Eastman, Si Xie, Rajkumar Kettimuthu, Prem Kumar, Panagiotis Spentzouris, Maria Spiropulu

Abstract: We describe an implementation of a quantum network over installed fiber in the Chicago area.We present network topology and control architecture of this network and illustrate preliminary results for quantum teleportation and coexistence of quantum and classical data on the same fiber link. We describe an implementation of a quantum network over installed fiber in the Chicago area.We present network topology and control architecture of this network and illustrate preliminary results for quantum teleportation and coexistence of quantum and classical data on the same fiber link. △ Less

Submitted 19 November, 2021; originally announced November 2021.

Report number: FERMILAB-CONF-21-477-CCD-QIS-SCD

Journal ref: SC21, 2nd International Workshop on Quantum Computing Software, 2021

Review of opportunities for new long-lived particle triggers in Run 3 of the Large Hadron Collider

Authors: Juliette Alimena, James Beacham, Freya Blekman, Adrián Casais Vidal, Xabier Cid Vidal, Matthew Citron, David Curtin, Albert De Roeck, Nishita Desai, Karri Folan Di Petrillo, Yuri Gershtein, Louis Henry, Tova Holmes, Brij Jashal, Philip James Ilten, Sascha Mehlhase, Javier Montejo Berlingen, Arantza Oyanguren, Giovanni Punzi, Murilo Santana Rangel, Federico Leo Redi, Lorenzo Sestini, Emma Torro, Carlos Vázquez Sierra, Maarten van Veghel , et al. (53 additional authors not shown)

Abstract: Long-lived particles (LLPs) are highly motivated signals of physics Beyond the Standard Model (BSM) with great discovery potential and unique experimental challenges. The LLP search programme made great advances during Run 2 of the Large Hadron Collider (LHC), but many important regions of signal space remain unexplored. Dedicated triggers are crucial to improve the potential of LLP searches, and… ▽ More Long-lived particles (LLPs) are highly motivated signals of physics Beyond the Standard Model (BSM) with great discovery potential and unique experimental challenges. The LLP search programme made great advances during Run 2 of the Large Hadron Collider (LHC), but many important regions of signal space remain unexplored. Dedicated triggers are crucial to improve the potential of LLP searches, and their development and expansion is necessary for the full exploitation of the new data. The public discussion of triggers has therefore been a relevant theme in the recent LLP literature, in the meetings of the LLP@LHC Community workshop and in the respective experiments. This paper documents the ideas collected during talks and discussions at these Workshops, benefiting as well from the ideas under development by the trigger community within the experimental collaborations. We summarise the theoretical motivations of various LLP scenarios leading to highly elusive signals, reviewing concrete ideas for triggers that could greatly extend the reach of the LHC experiments. We thus expect this document to encourage further thinking for both the phenomenological and experimental communities, as a stepping stone to further develop the LLP@LHC physics programme. △ Less

Submitted 27 October, 2021; originally announced October 2021.

Comments: Produced for the LPCC Long-Lived Particles Working Group. 43 pages, 1 figure

Report number: CERN-LPCC-2021-01

Impedance-matched differential superconducting nanowire detectors

Authors: Marco Colangelo, Boris Korzh, Jason P. Allmaras, Andrew D. Beyer, Andrew S. Mueller, Ryan M. Briggs, Bruce Bumble, Marcus Runyan, Martin J. Stevens, Adam N. McCaughan, Di Zhu, Stephen Smith, Wolfgang Becker, Lautaro Narváez, Joshua C. Bienfang, Simone Frasca, Angel E. Velasco, Cristián H. Peña, Edward E. Ramirez, Alexander B. Walter, Ekkehart Schmidt, Emma E. Wollman, Maria Spiropulu, Richard Mirin, Sae Woo Nam , et al. (2 additional authors not shown)

Abstract: Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a h… ▽ More Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter, simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our niobium nitride differential SNSPDs achieve $47.3\,\% \pm 2.4\,\%$ system detection efficiency and sub-$10\,\mathrm{ps}$ system jitter at $775\,\mathrm{nm}$, while at $1550\,\mathrm{nm}$ they achieve $71.1\,\% \pm 3.7\,\%$ system detection efficiency and $13.1\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ system jitter. These detectors also achieve sub-100 ps timing response at one one-hundredth maximum level, $30.7\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $775\,\mathrm{nm}$ and $47.6\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $1550\,\mathrm{nm}$, enabling time-correlated single-photon counting with high dynamic range response functions. Furthermore, thanks to the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for many scientific applications. △ Less

Submitted 17 August, 2021; originally announced August 2021.

Source-Agnostic Gravitational-Wave Detection with Recurrent Autoencoders

Authors: Eric A. Moreno, Jean-Roch Vlimant, Maria Spiropulu, Bartlomiej Borzyszkowski, Maurizio Pierini

Abstract: We present an application of anomaly detection techniques based on deep recurrent autoencoders to the problem of detecting gravitational wave signals in laser interferometers. Trained on noise data, this class of algorithms could detect signals using an unsupervised strategy, i.e., without targeting a specific kind of source. We develop a custom architecture to analyze the data from two interferom… ▽ More We present an application of anomaly detection techniques based on deep recurrent autoencoders to the problem of detecting gravitational wave signals in laser interferometers. Trained on noise data, this class of algorithms could detect signals using an unsupervised strategy, i.e., without targeting a specific kind of source. We develop a custom architecture to analyze the data from two interferometers. We compare the obtained performance to that obtained with other autoencoder architectures and with a convolutional classifier. The unsupervised nature of the proposed strategy comes with a cost in terms of accuracy, when compared to more traditional supervised techniques. On the other hand, there is a qualitative gain in generalizing the experimental sensitivity beyond the ensemble of pre-computed signal templates. The recurrent autoencoder outperforms other autoencoders based on different architectures. The class of recurrent autoencoders presented in this paper could complement the search strategy employed for gravitational wave detection and extend the reach of the ongoing detection campaigns. △ Less

Submitted 14 December, 2021; v1 submitted 27 July, 2021; originally announced July 2021.

Comments: 16 pages, 6 figures. Updated version with new datasets, resulting from suggestions received in the MLST referee report

Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector

Authors: R. Abbott, A. Abreu, F. Addesa, M. Alhusseini, T. Anderson, Y. Andreev, A. Apresyan, R. Arcidiacono, M. Arenton, E. Auffray, D. Bastos, L. A. T. Bauerdick, R. Bellan, M. Bellato, A. Benaglia, M. Benettoni, R. Bertoni, M. Besancon, S. Bharthuar, A. Bornheim, E. Brücken, J. N. Butler, C. Campagnari, M. Campana, R. Carlin , et al. (174 additional authors not shown)

Abstract: The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about… ▽ More The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices. △ Less

Submitted 16 July, 2021; v1 submitted 15 April, 2021; originally announced April 2021.

Journal ref: Journal of Instrumentation, Volume 16, July 2021

Illinois Express Quantum Network (IEQNET): Metropolitan-scale experimental quantum networking over deployed optical fiber

Authors: Joaquin Chung, Gregory Kanter, Nikolai Lauk, Raju Valivarthi, Wenji Wu, Russell R. Ceballos, Cristián Peña, Neil Sinclair, Jordan Thomas, Si Xie, Rajkumar Kettimuthu, Prem Kumar, Panagiotis Spentzouris, Maria Spiropulu

Abstract: The Illinois Express Quantum Network (IEQNET) is a program to realize metro-scale quantum networking over deployed optical fiber using currently available technology. IEQNET consists of multiple sites that are geographically dispersed in the Chicago metropolitan area. Each site has one or more quantum nodes (Q-nodes) representing the communication parties in a quantum network. Q-nodes generate or… ▽ More The Illinois Express Quantum Network (IEQNET) is a program to realize metro-scale quantum networking over deployed optical fiber using currently available technology. IEQNET consists of multiple sites that are geographically dispersed in the Chicago metropolitan area. Each site has one or more quantum nodes (Q-nodes) representing the communication parties in a quantum network. Q-nodes generate or measure quantum signals such as entangled photons and communicate the results via standard, classical, means. The entangled photons in IEQNET nodes are generated at multiple wavelengths, and are selectively distributed to the desired users via optical switches. Here we describe the network architecture of IEQNET, including the Internet-inspired layered hierarchy that leverages software-defined-networking (SDN) technology to perform traditional wavelength routing and assignment between the Q-nodes. Specifically, SDN decouples the control and data planes, with the control plane being entirely classical. Issues associated with synchronization, calibration, network monitoring, and scheduling will be discussed. An important goal of IEQNET is demonstrating the extent to which the control plane can coexist with the data plane using the same fiber lines. This goal is furthered by the use of tunable narrow-band optical filtering at the receivers and, at least in some cases, a wide wavelength separation between the quantum and classical channels. We envision IEQNET to aid in developing robust and practical quantum networks by demonstrating metro-scale quantum communication tasks such as entanglement distribution and quantum-state teleportation. △ Less

Submitted 9 April, 2021; originally announced April 2021.

Comments: 9 pages, 4 figures

Performance of a Geometric Deep Learning Pipeline for HL-LHC Particle Tracking

Authors: Xiangyang Ju, Daniel Murnane, Paolo Calafiura, Nicholas Choma, Sean Conlon, Steve Farrell, Yaoyuan Xu, Maria Spiropulu, Jean-Roch Vlimant, Adam Aurisano, V Hewes, Giuseppe Cerati, Lindsey Gray, Thomas Klijnsma, Jim Kowalkowski, Markus Atkinson, Mark Neubauer, Gage DeZoort, Savannah Thais, Aditi Chauhan, Alex Schuy, Shih-Chieh Hsu, Alex Ballow, and Alina Lazar

Abstract: The Exa.TrkX project has applied geometric learning concepts such as metric learning and graph neural networks to HEP particle tracking. Exa.TrkX's tracking pipeline groups detector measurements to form track candidates and filters them. The pipeline, originally developed using the TrackML dataset (a simulation of an LHC-inspired tracking detector), has been demonstrated on other detectors, includ… ▽ More The Exa.TrkX project has applied geometric learning concepts such as metric learning and graph neural networks to HEP particle tracking. Exa.TrkX's tracking pipeline groups detector measurements to form track candidates and filters them. The pipeline, originally developed using the TrackML dataset (a simulation of an LHC-inspired tracking detector), has been demonstrated on other detectors, including DUNE Liquid Argon TPC and CMS High-Granularity Calorimeter. This paper documents new developments needed to study the physics and computing performance of the Exa.TrkX pipeline on the full TrackML dataset, a first step towards validating the pipeline using ATLAS and CMS data. The pipeline achieves tracking efficiency and purity similar to production tracking algorithms. Crucially for future HEP applications, the pipeline benefits significantly from GPU acceleration, and its computational requirements scale close to linearly with the number of particles in the event. △ Less

Submitted 21 September, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Graph Neural Network for Object Reconstruction in Liquid Argon Time Projection Chambers

Authors: V Hewes, Adam Aurisano, Giuseppe Cerati, Jim Kowalkowski, Claire Lee, Wei-keng Liao, Alexandra Day, Ankit Agrawal, Maria Spiropulu, Jean-Roch Vlimant, Lindsey Gray, Thomas Klijnsma, Paolo Calafiura, Sean Conlon, Steve Farrell, Xiangyang Ju, Daniel Murnane

Abstract: This paper presents a graph neural network (GNN) technique for low-level reconstruction of neutrino interactions in a Liquid Argon Time Projection Chamber (LArTPC). GNNs are still a relatively novel technique, and have shown great promise for similar reconstruction tasks in the LHC. In this paper, a multihead attention message passing network is used to classify the relationship between detector… ▽ More This paper presents a graph neural network (GNN) technique for low-level reconstruction of neutrino interactions in a Liquid Argon Time Projection Chamber (LArTPC). GNNs are still a relatively novel technique, and have shown great promise for similar reconstruction tasks in the LHC. In this paper, a multihead attention message passing network is used to classify the relationship between detector hits by labelling graph edges, determining whether hits were produced by the same underlying particle, and if so, the particle type. The trained model is 84% accurate overall, and performs best on the EM shower and muon track classes. The model's strengths and weaknesses are discussed, and plans for developing this technique further are summarised. △ Less

Submitted 11 March, 2021; v1 submitted 10 March, 2021; originally announced March 2021.

Comments: 7 pages, 3 figures, submitted to the 25th International Conference on Computing in High-Energy and Nuclear Physics

MLPF: Efficient machine-learned particle-flow reconstruction using graph neural networks

Authors: Joosep Pata, Javier Duarte, Jean-Roch Vlimant, Maurizio Pierini, Maria Spiropulu

Abstract: In general-purpose particle detectors, the particle-flow algorithm may be used to reconstruct a comprehensive particle-level view of the event by combining information from the calorimeters and the trackers, significantly improving the detector resolution for jets and the missing transverse momentum. In view of the planned high-luminosity upgrade of the CERN Large Hadron Collider (LHC), it is nece… ▽ More In general-purpose particle detectors, the particle-flow algorithm may be used to reconstruct a comprehensive particle-level view of the event by combining information from the calorimeters and the trackers, significantly improving the detector resolution for jets and the missing transverse momentum. In view of the planned high-luminosity upgrade of the CERN Large Hadron Collider (LHC), it is necessary to revisit existing reconstruction algorithms and ensure that both the physics and computational performance are sufficient in an environment with many simultaneous proton-proton interactions (pileup). Machine learning may offer a prospect for computationally efficient event reconstruction that is well-suited to heterogeneous computing platforms, while significantly improving the reconstruction quality over rule-based algorithms for granular detectors. We introduce MLPF, a novel, end-to-end trainable, machine-learned particle-flow algorithm based on parallelizable, computationally efficient, and scalable graph neural networks optimized using a multi-task objective on simulated events. We report the physics and computational performance of the MLPF algorithm on a Monte Carlo dataset of top quark-antiquark pairs produced in proton-proton collisions in conditions similar to those expected for the high-luminosity LHC. The MLPF algorithm improves the physics response with respect to a rule-based benchmark algorithm and demonstrates computationally scalable particle-flow reconstruction in a high-pileup environment. △ Less

Submitted 9 June, 2021; v1 submitted 21 January, 2021; originally announced January 2021.

Comments: 15 pages, 10 figures

Journal ref: Eur. Phys. J. C (2021) 81: 381

Teleportation Systems Towards a Quantum Internet

Authors: Raju Valivarthi, Samantha Davis, Cristian Pena, Si Xie, Nikolai Lauk, Lautaro Narvaez, Jason P. Allmaras, Andrew D. Beyer, Yewon Gim, Meraj Hussein, George Iskander, Hyunseong Linus Kim, Boris Korzh, Andrew Mueller, Mandy Rominsky, Matthew Shaw, Dawn Tang, Emma E. Wollman, Christoph Simon, Panagiotis Spentzouris, Neil Sinclair, Daniel Oblak, Maria Spiropulu

Abstract: Quantum teleportation is essential for many quantum information technologies including long-distance quantum networks. Using fiber-coupled devices, including state-of-the-art low-noise superconducting nanowire single photon detectors and off-the-shelf optics, we achieve quantum teleportation of time-bin qubits at the telecommunication wavelength of 1536.5 nm. We measure teleportation fidelities of… ▽ More Quantum teleportation is essential for many quantum information technologies including long-distance quantum networks. Using fiber-coupled devices, including state-of-the-art low-noise superconducting nanowire single photon detectors and off-the-shelf optics, we achieve quantum teleportation of time-bin qubits at the telecommunication wavelength of 1536.5 nm. We measure teleportation fidelities of >=90% that are consistent with an analytical model of our system, which includes realistic imperfections. To demonstrate the compatibility of our setup with deployed quantum networks, we teleport qubits over 22 km of single-mode fiber while transmitting qubits over an additional 22 km of fiber. Our systems, which are compatible with emerging solid-state quantum devices, provide a realistic foundation for a high-fidelity quantum internet with practical devices. △ Less

Submitted 28 July, 2020; v1 submitted 21 July, 2020; originally announced July 2020.

Comments: 15 pages, 7 Figures ; fixed typos on affiliation of Christoph Simon (Calgary)

Journal ref: PRX Quantum 1, 020317 (2020)

Track Seeding and Labelling with Embedded-space Graph Neural Networks

Authors: Nicholas Choma, Daniel Murnane, Xiangyang Ju, Paolo Calafiura, Sean Conlon, Steven Farrell, Prabhat, Giuseppe Cerati, Lindsey Gray, Thomas Klijnsma, Jim Kowalkowski, Panagiotis Spentzouris, Jean-Roch Vlimant, Maria Spiropulu, Adam Aurisano, V Hewes, Aristeidis Tsaris, Kazuhiro Terao, Tracy Usher

Abstract: To address the unprecedented scale of HL-LHC data, the Exa.TrkX project is investigating a variety of machine learning approaches to particle track reconstruction. The most promising of these solutions, graph neural networks (GNN), process the event as a graph that connects track measurements (detector hits corresponding to nodes) with candidate line segments between the hits (corresponding to edg… ▽ More To address the unprecedented scale of HL-LHC data, the Exa.TrkX project is investigating a variety of machine learning approaches to particle track reconstruction. The most promising of these solutions, graph neural networks (GNN), process the event as a graph that connects track measurements (detector hits corresponding to nodes) with candidate line segments between the hits (corresponding to edges). Detector information can be associated with nodes and edges, enabling a GNN to propagate the embedded parameters around the graph and predict node-, edge- and graph-level observables. Previously, message-passing GNNs have shown success in predicting doublet likelihood, and we here report updates on the state-of-the-art architectures for this task. In addition, the Exa.TrkX project has investigated innovations in both graph construction, and embedded representations, in an effort to achieve fully learned end-to-end track finding. Hence, we present a suite of extensions to the original model, with encouraging results for hitgraph classification. In addition, we explore increased performance by constructing graphs from learned representations which contain non-linear metric structure, allowing for efficient clustering and neighborhood queries of data points. We demonstrate how this framework fits in with both traditional clustering pipelines, and GNN approaches. The embedded graphs feed into high-accuracy doublet and triplet classifiers, or can be used as an end-to-end track classifier by clustering in an embedded space. A set of post-processing methods improve performance with knowledge of the detector physics. Finally, we present numerical results on the TrackML particle tracking challenge dataset, where our framework shows favorable results in both seeding and track finding. △ Less

Submitted 30 June, 2020; originally announced July 2020.

Comments: Proceedings submission in Connecting the Dots Workshop 2020, 10 pages

Graph Neural Networks for Particle Reconstruction in High Energy Physics detectors

Authors: Xiangyang Ju, Steven Farrell, Paolo Calafiura, Daniel Murnane, Prabhat, Lindsey Gray, Thomas Klijnsma, Kevin Pedro, Giuseppe Cerati, Jim Kowalkowski, Gabriel Perdue, Panagiotis Spentzouris, Nhan Tran, Jean-Roch Vlimant, Alexander Zlokapa, Joosep Pata, Maria Spiropulu, Sitong An, Adam Aurisano, V Hewes, Aristeidis Tsaris, Kazuhiro Terao, Tracy Usher

Abstract: Pattern recognition problems in high energy physics are notably different from traditional machine learning applications in computer vision. Reconstruction algorithms identify and measure the kinematic properties of particles produced in high energy collisions and recorded with complex detector systems. Two critical applications are the reconstruction of charged particle trajectories in tracking d… ▽ More Pattern recognition problems in high energy physics are notably different from traditional machine learning applications in computer vision. Reconstruction algorithms identify and measure the kinematic properties of particles produced in high energy collisions and recorded with complex detector systems. Two critical applications are the reconstruction of charged particle trajectories in tracking detectors and the reconstruction of particle showers in calorimeters. These two problems have unique challenges and characteristics, but both have high dimensionality, high degree of sparsity, and complex geometric layouts. Graph Neural Networks (GNNs) are a relatively new class of deep learning architectures which can deal with such data effectively, allowing scientists to incorporate domain knowledge in a graph structure and learn powerful representations leveraging that structure to identify patterns of interest. In this work we demonstrate the applicability of GNNs to these two diverse particle reconstruction problems. △ Less

Submitted 3 June, 2020; v1 submitted 25 March, 2020; originally announced March 2020.

Comments: Presented at NeurIPS 2019 Workshop "Machine Learning and the Physical Sciences"

Calorimetry with Deep Learning: Particle Simulation and Reconstruction for Collider Physics

Authors: Dawit Belayneh, Federico Carminati, Amir Farbin, Benjamin Hooberman, Gulrukh Khattak, Miaoyuan Liu, Junze Liu, Dominick Olivito, Vitória Barin Pacela, Maurizio Pierini, Alexander Schwing, Maria Spiropulu, Sofia Vallecorsa, Jean-Roch Vlimant, Wei Wei, Matt Zhang

Abstract: Using detailed simulations of calorimeter showers as training data, we investigate the use of deep learning algorithms for the simulation and reconstruction of particles produced in high-energy physics collisions. We train neural networks on shower data at the calorimeter-cell level, and show significant improvements for simulation and reconstruction when using these networks compared to methods w… ▽ More Using detailed simulations of calorimeter showers as training data, we investigate the use of deep learning algorithms for the simulation and reconstruction of particles produced in high-energy physics collisions. We train neural networks on shower data at the calorimeter-cell level, and show significant improvements for simulation and reconstruction when using these networks compared to methods which rely on currently-used state-of-the-art algorithms. We define two models: an end-to-end reconstruction network which performs simultaneous particle identification and energy regression of particles when given calorimeter shower data, and a generative network which can provide reasonable modeling of calorimeter showers for different particle types at specified angles and energies. We investigate the optimization of our models with hyperparameter scans. Furthermore, we demonstrate the applicability of the reconstruction model to shower inputs from other detector geometries, specifically ATLAS-like and CMS-like geometries. These networks can serve as fast and computationally light methods for particle shower simulation and reconstruction for current and future experiments at particle colliders. △ Less

Submitted 8 January, 2020; v1 submitted 14 December, 2019; originally announced December 2019.

Comments: 26 pages, 38 figures. Corrected typos and added additional references in v2. Extended Acknowledgements section in v3

Development of Quantum InterConnects for Next-Generation Information Technologies

Authors: David Awschalom, Karl K. Berggren, Hannes Bernien, Sunil Bhave, Lincoln D. Carr, Paul Davids, Sophia E. Economou, Dirk Englund, Andrei Faraon, Marty Fejer, Saikat Guha, Martin V. Gustafsson, Evelyn Hu, Liang Jiang, Jungsang Kim, Boris Korzh, Prem Kumar, Paul G. Kwiat, Marko Lončar, Mikhail D. Lukin, David A. B. Miller, Christopher Monroe, Sae Woo Nam, Prineha Narang, Jason S. Orcutt , et al. (10 additional authors not shown)

Abstract: Just as classical information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the interconnect, a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in opti… ▽ More Just as classical information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the interconnect, a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in optical fiber, or microwave fields. While interconnects have been well engineered for decades in the realm of classical information technology, quantum interconnects (QuICs) present special challenges, as they must allow the transfer of fragile quantum states between different physical parts or degrees of freedom of the system. The diversity of QIT platforms (superconducting, atomic, solid-state color center, optical, etc.) that will form a quantum internet poses additional challenges. As quantum systems scale to larger size, the quantum interconnect bottleneck is imminent, and is emerging as a grand challenge for QIT. For these reasons, it is the position of the community represented by participants of the NSF workshop on Quantum Interconnects that accelerating QuIC research is crucial for sustained development of a national quantum science and technology program. Given the diversity of QIT platforms, materials used, applications, and infrastructure required, a convergent research program including partnership between academia, industry and national laboratories is required. This document is a summary from a U.S. National Science Foundation supported workshop held on 31 October - 1 November 2019 in Alexandria, VA. Attendees were charged to identify the scientific and community needs, opportunities, and significant challenges for quantum interconnects over the next 2-5 years. △ Less

Submitted 2 January, 2020; v1 submitted 13 December, 2019; originally announced December 2019.

Comments: This is an updated version V2, including expanded text and listing of all co-authors. To whom correspondence should be addressed: Marko Lončar: loncar@seas.harvard.edu; Michael G. Raymer: raymer@uoregon.edu

Journal ref: PRX Quantum 2, 017002 (2021)

Particle Generative Adversarial Networks for full-event simulation at the LHC and their application to pileup description

Authors: Jesus Arjona Martinez, Thong Q Nguyen, Maurizio Pierini, Maria Spiropulu, Jean-Roch Vlimant

Abstract: We investigate how a Generative Adversarial Network could be used to generate a list of particle four-momenta from LHC proton collisions, allowing one to define a generative model that could abstract from the irregularities of typical detector geometries. As an example of application, we show how such an architecture could be used as a generator of LHC parasitic collisions (pileup). We present two… ▽ More We investigate how a Generative Adversarial Network could be used to generate a list of particle four-momenta from LHC proton collisions, allowing one to define a generative model that could abstract from the irregularities of typical detector geometries. As an example of application, we show how such an architecture could be used as a generator of LHC parasitic collisions (pileup). We present two approaches to generate the events: unconditional generator and generator conditioned on missing transverse energy. We assess generation performances in a realistic LHC data-analysis environment, with a pileup mitigation algorithm applied. △ Less

Submitted 5 December, 2019; originally announced December 2019.

Comments: 7 pages, 5 figures. To be appeared in Proceedings of the 19th International Workshop on Advanced Computing and Analysis Techniques in Physics Research

Journal ref: J. Phys. : Conf. Ser. 1525 (2020) 012081

Perspectives on quantum transduction

Authors: Nikolai Lauk, Neil Sinclair, Shabir Barzanjeh, Jacob P. Covey, Mark Saffman, Maria Spiropulu, Christoph Simon

Abstract: Quantum transduction, the process of converting quantum signals from one form of energy to another, is an important area of quantum science and technology. The present perspective article reviews quantum transduction between microwave and optical photons, an area that has recently seen a lot of activity and progress because of its relevance for connecting superconducting quantum processors over lo… ▽ More Quantum transduction, the process of converting quantum signals from one form of energy to another, is an important area of quantum science and technology. The present perspective article reviews quantum transduction between microwave and optical photons, an area that has recently seen a lot of activity and progress because of its relevance for connecting superconducting quantum processors over long distances, among other applications. Our review covers the leading approaches to achieving such transduction, with an emphasis on those based on atomic ensembles, opto-electromechanics, and electro-optics. We briefly discuss relevant metrics from the point of view of different applications, as well as challenges for the future. △ Less

Submitted 10 October, 2019; originally announced October 2019.

Comments: 13 pages, 5 figures

Journal ref: Quantum Sci. Technol. 5, 020501 (2020)

Interaction networks for the identification of boosted $H\to b\overline{b}$ decays

Authors: Eric A. Moreno, Thong Q. Nguyen, Jean-Roch Vlimant, Olmo Cerri, Harvey B. Newman, Avikar Periwal, Maria Spiropulu, Javier M. Duarte, Maurizio Pierini

Abstract: We develop an algorithm based on an interaction network to identify high-transverse-momentum Higgs bosons decaying to bottom quark-antiquark pairs and distinguish them from ordinary jets that reflect the configurations of quarks and gluons at short distances. The algorithm's inputs are features of the reconstructed charged particles in a jet and the secondary vertices associated with them. Describ… ▽ More We develop an algorithm based on an interaction network to identify high-transverse-momentum Higgs bosons decaying to bottom quark-antiquark pairs and distinguish them from ordinary jets that reflect the configurations of quarks and gluons at short distances. The algorithm's inputs are features of the reconstructed charged particles in a jet and the secondary vertices associated with them. Describing the jet shower as a combination of particle-to-particle and particle-to-vertex interactions, the model is trained to learn a jet representation on which the classification problem is optimized. The algorithm is trained on simulated samples of realistic LHC collisions, released by the CMS Collaboration on the CERN Open Data Portal. The interaction network achieves a drastic improvement in the identification performance with respect to state-of-the-art algorithms. △ Less

Submitted 28 July, 2020; v1 submitted 26 September, 2019; originally announced September 2019.

Comments: 20 pages, 8 figures, 6 tables, version published in PRD

Report number: FERMILAB-PUB-19-492-CMS-E

Journal ref: Phys. Rev. D 102, 012010 (2020)

JEDI-net: a jet identification algorithm based on interaction networks

Authors: Eric A. Moreno, Olmo Cerri, Javier M. Duarte, Harvey B. Newman, Thong Q. Nguyen, Avikar Periwal, Maurizio Pierini, Aidana Serikova, Maria Spiropulu, Jean-Roch Vlimant

Abstract: We investigate the performance of a jet identification algorithm based on interaction networks (JEDI-net) to identify all-hadronic decays of high-momentum heavy particles produced at the LHC and distinguish them from ordinary jets originating from the hadronization of quarks and gluons. The jet dynamics are described as a set of one-to-one interactions between the jet constituents. Based on a repr… ▽ More We investigate the performance of a jet identification algorithm based on interaction networks (JEDI-net) to identify all-hadronic decays of high-momentum heavy particles produced at the LHC and distinguish them from ordinary jets originating from the hadronization of quarks and gluons. The jet dynamics are described as a set of one-to-one interactions between the jet constituents. Based on a representation learned from these interactions, the jet is associated to one of the considered categories. Unlike other architectures, the JEDI-net models achieve their performance without special handling of the sparse input jet representation, extensive pre-processing, particle ordering, or specific assumptions regarding the underlying detector geometry. The presented models give better results with less model parameters, offering interesting prospects for LHC applications. △ Less

Submitted 27 January, 2020; v1 submitted 14 August, 2019; originally announced August 2019.

Comments: 16 pages, 9 figures, 7 tables

Report number: FERMILAB-PUB-19-360-PPD

Journal ref: Eur. Phys. J. C 80, 58 (2020)

Quantum adiabatic machine learning with zooming

Authors: Alexander Zlokapa, Alex Mott, Joshua Job, Jean-Roch Vlimant, Daniel Lidar, Maria Spiropulu

Abstract: Recent work has shown that quantum annealing for machine learning, referred to as QAML, can perform comparably to state-of-the-art machine learning methods with a specific application to Higgs boson classification. We propose QAML-Z, a novel algorithm that iteratively zooms in on a region of the energy surface by mapping the problem to a continuous space and sequentially applying quantum annealing… ▽ More Recent work has shown that quantum annealing for machine learning, referred to as QAML, can perform comparably to state-of-the-art machine learning methods with a specific application to Higgs boson classification. We propose QAML-Z, a novel algorithm that iteratively zooms in on a region of the energy surface by mapping the problem to a continuous space and sequentially applying quantum annealing to an augmented set of weak classifiers. Results on a programmable quantum annealer show that QAML-Z matches classical deep neural network performance at small training set sizes and reduces the performance margin between QAML and classical deep neural networks by almost 50% at large training set sizes, as measured by area under the ROC curve. The significant improvement of quantum annealing algorithms for machine learning and the use of a discrete quantum algorithm on a continuous optimization problem both opens a new class of problems that can be solved by quantum annealers and suggests the approach in performance of near-term quantum machine learning towards classical benchmarks. △ Less

Submitted 23 October, 2020; v1 submitted 13 August, 2019; originally announced August 2019.

Comments: 9 pages, 5 figures

Journal ref: Phys. Rev. A 102, 062405 (2020)

Charged particle tracking with quantum annealing-inspired optimization

Authors: Alexander Zlokapa, Abhishek Anand, Jean-Roch Vlimant, Javier M. Duarte, Joshua Job, Daniel Lidar, Maria Spiropulu

Abstract: At the High Luminosity Large Hadron Collider (HL-LHC), traditional track reconstruction techniques that are critical for analysis are expected to face challenges due to scaling with track density. Quantum annealing has shown promise in its ability to solve combinatorial optimization problems amidst an ongoing effort to establish evidence of a quantum speedup. As a step towards exploiting such pote… ▽ More At the High Luminosity Large Hadron Collider (HL-LHC), traditional track reconstruction techniques that are critical for analysis are expected to face challenges due to scaling with track density. Quantum annealing has shown promise in its ability to solve combinatorial optimization problems amidst an ongoing effort to establish evidence of a quantum speedup. As a step towards exploiting such potential speedup, we investigate a track reconstruction approach by adapting the existing geometric Denby-Peterson (Hopfield) network method to the quantum annealing framework and to HL-LHC conditions. Furthermore, we develop additional techniques to embed the problem onto existing and near-term quantum annealing hardware. Results using simulated annealing and quantum annealing with the D-Wave 2X system on the TrackML dataset are presented, demonstrating the successful application of a quantum annealing-inspired algorithm to the track reconstruction challenge. We find that combinatorial optimization problems can effectively reconstruct tracks, suggesting possible applications for fast hardware-specific implementations at the LHC while leaving open the possibility of a quantum speedup for tracking. △ Less

Submitted 12 August, 2019; originally announced August 2019.

Comments: 18 pages, 21 figures

Journal ref: Quantum Mach. Intell. 3, 27 (2021)

Processing Columnar Collider Data with GPU-Accelerated Kernels

Authors: Joosep Pata, Maria Spiropulu

Abstract: At high energy physics experiments, processing billions of records of structured numerical data from collider events to a few statistical summaries is a common task. The data processing is typically more complex than standard query languages allow, such that custom numerical codes are used. At present, these codes mostly operate on individual event records and are parallelized in multi-step data r… ▽ More At high energy physics experiments, processing billions of records of structured numerical data from collider events to a few statistical summaries is a common task. The data processing is typically more complex than standard query languages allow, such that custom numerical codes are used. At present, these codes mostly operate on individual event records and are parallelized in multi-step data reduction workflows using batch jobs across CPU farms. Based on a simplified top quark pair analysis with CMS Open Data, we demonstrate that it is possible to carry out significant parts of a collider analysis at a rate of around a million events per second on a single multicore server with optional GPU acceleration. This is achieved by representing HEP event data as memory-mappable sparse arrays of columns, and by expressing common analysis operations as kernels that can be used to process the event data in parallel. We find that only a small number of relatively simple functional kernels are needed for a generic HEP analysis. The approach based on columnar processing of data could speed up and simplify the cycle for delivering physics results at HEP experiments. We release the \texttt{hepaccelerate} prototype library as a demonstrator of such methods. △ Less

Submitted 16 October, 2019; v1 submitted 14 June, 2019; originally announced June 2019.

Variational Autoencoders for New Physics Mining at the Large Hadron Collider

Authors: Olmo Cerri, Thong Q. Nguyen, Maurizio Pierini, Maria Spiropulu, Jean-Roch Vlimant

Abstract: Using variational autoencoders trained on known physics processes, we develop a one-sided threshold test to isolate previously unseen processes as outlier events. Since the autoencoder training does not depend on any specific new physics signature, the proposed procedure doesn't make specific assumptions on the nature of new physics. An event selection based on this algorithm would be complementar… ▽ More Using variational autoencoders trained on known physics processes, we develop a one-sided threshold test to isolate previously unseen processes as outlier events. Since the autoencoder training does not depend on any specific new physics signature, the proposed procedure doesn't make specific assumptions on the nature of new physics. An event selection based on this algorithm would be complementary to classic LHC searches, typically based on model-dependent hypothesis testing. Such an algorithm would deliver a list of anomalous events, that the experimental collaborations could further scrutinize and even release as a catalog, similarly to what is typically done in other scientific domains. Event topologies repeating in this dataset could inspire new-physics model building and new experimental searches. Running in the trigger system of the LHC experiments, such an application could identify anomalous events that would be otherwise lost, extending the scientific reach of the LHC. △ Less

Submitted 13 June, 2019; v1 submitted 26 November, 2018; originally announced November 2018.

Comments: 29 pages, 12 figures, 5 tables

Journal ref: J. High Energ. Phys. (2019) 2019: 36

Pileup mitigation at the Large Hadron Collider with Graph Neural Networks

Authors: Jesus Arjona Martinez, Olmo Cerri, Maurizio Pierini, Maria Spiropulu, Jean-Roch Vlimant

Abstract: At the Large Hadron Collider, the high transverse-momentum events studied by experimental collaborations occur in coincidence with parasitic low transverse-momentum collisions, usually referred to as pileup. Pileup mitigation is a key ingredient of the online and offline event reconstruction as pileup affects the reconstruction accuracy of many physics observables. We present a classifier based on… ▽ More At the Large Hadron Collider, the high transverse-momentum events studied by experimental collaborations occur in coincidence with parasitic low transverse-momentum collisions, usually referred to as pileup. Pileup mitigation is a key ingredient of the online and offline event reconstruction as pileup affects the reconstruction accuracy of many physics observables. We present a classifier based on Graph Neural Networks, trained to retain particles coming from high-transverse-momentum collisions, while rejecting those coming from pileup collisions. This model is designed as a refinement of the PUPPI algorithm, employed in many LHC data analyses since 2015. Thanks to an extended basis of input information and the learning capabilities of the considered network architecture, we show an improvement in pileup-rejection performances with respect to state-of-the-art solutions. △ Less

Submitted 13 June, 2019; v1 submitted 18 October, 2018; originally announced October 2018.

Comments: 12 pages, 11 figures

Novel deep learning methods for track reconstruction

Authors: Steven Farrell, Paolo Calafiura, Mayur Mudigonda, Prabhat, Dustin Anderson, Jean-Roch Vlimant, Stephan Zheng, Josh Bendavid, Maria Spiropulu, Giuseppe Cerati, Lindsey Gray, Jim Kowalkowski, Panagiotis Spentzouris, Aristeidis Tsaris

Abstract: For the past year, the HEP.TrkX project has been investigating machine learning solutions to LHC particle track reconstruction problems. A variety of models were studied that drew inspiration from computer vision applications and operated on an image-like representation of tracking detector data. While these approaches have shown some promise, image-based methods face challenges in scaling up to r… ▽ More For the past year, the HEP.TrkX project has been investigating machine learning solutions to LHC particle track reconstruction problems. A variety of models were studied that drew inspiration from computer vision applications and operated on an image-like representation of tracking detector data. While these approaches have shown some promise, image-based methods face challenges in scaling up to realistic HL-LHC data due to high dimensionality and sparsity. In contrast, models that can operate on the spacepoint representation of track measurements ("hits") can exploit the structure of the data to solve tasks efficiently. In this paper we will show two sets of new deep learning models for reconstructing tracks using space-point data arranged as sequences or connected graphs. In the first set of models, Recurrent Neural Networks (RNNs) are used to extrapolate, build, and evaluate track candidates akin to Kalman Filter algorithms. Such models can express their own uncertainty when trained with an appropriate likelihood loss function. The second set of models use Graph Neural Networks (GNNs) for the tasks of hit classification and segment classification. These models read a graph of connected hits and compute features on the nodes and edges. They adaptively learn which hit connections are important and which are spurious. The models are scaleable with simple architecture and relatively few parameters. Results for all models will be presented on ACTS generic detector simulated data. △ Less

Submitted 14 October, 2018; originally announced October 2018.

Comments: CTD 2018 proceedings

Projection for ZZZ Production Cross Section Measurements at the HL-LHC

Authors: Xiaoling Liu, Jay M. Lawhorn, Maria Spiropulu

Abstract: Triple gauge boson (tri-boson) production is one of the ways to study the Quartic Gauge Couplings (QGC) and the anomalous QGC beyond the Standard Model of particle physics. In particular, we investigated the signal selection criteria for ZZZ production in the High Luminosity Large Hadron Collider (HL-LHC) scenario. We wrote code which selects and reconstructs 3 desired Z bosons from the produced e… ▽ More Triple gauge boson (tri-boson) production is one of the ways to study the Quartic Gauge Couplings (QGC) and the anomalous QGC beyond the Standard Model of particle physics. In particular, we investigated the signal selection criteria for ZZZ production in the High Luminosity Large Hadron Collider (HL-LHC) scenario. We wrote code which selects and reconstructs 3 desired Z bosons from the produced electrons, muons and jets. We ran the code on selected Monte Carlo Simulation samples, including the ZZZ signal samples and other background (e.g. top pair production TT) samples. We made plots of event variables and looked for variables that can potentially separate the signal from the backgrounds. Then we put constraints on these variables to optimize the signal to background ratio for various types of final states of ZZZ and obtained the expected yields of the decays at the HL-LHC. We expect to see 1.42 +/- 0.25 ZZZ event with 0.82 +/- 0.60 background event in the rare fully leptonic channel. Furthermore, signal extraction in the 2 leptonic Z and 1 hadronic Z channel shows potential and is worth further investigation. △ Less

Submitted 15 October, 2018; v1 submitted 6 October, 2018; originally announced October 2018.

Comments: This paper has been withdrawn by the author since it has not gone through the CMS collaboration review

Identification of Long-lived Charged Particles using Time-Of-Flight Systems at the Upgraded LHC detectors

Authors: O. Cerri, S. Xie, Cristian Peña, Maria Spiropulu

Abstract: We study the impact of picosecond precision timing detection systems on the LHC experiments' long-lived particle search program during the HL-LHC era. We develop algorithms that allow us to reconstruct the mass of such charged particles and perform particle identification using the time-of-flight measurement. We investigate the reach for benchmark scenarios as a function of the timing resolution,… ▽ More We study the impact of picosecond precision timing detection systems on the LHC experiments' long-lived particle search program during the HL-LHC era. We develop algorithms that allow us to reconstruct the mass of such charged particles and perform particle identification using the time-of-flight measurement. We investigate the reach for benchmark scenarios as a function of the timing resolution, and find sensitivity improvement of up to a factor of ten, depending on the new heavy particle mass. △ Less

Submitted 10 January, 2019; v1 submitted 14 July, 2018; originally announced July 2018.

Comments: 20 pages, 13 figures

Topology classification with deep learning to improve real-time event selection at the LHC

Authors: Thong Q. Nguyen, Daniel Weitekamp III, Dustin Anderson, Roberto Castello, Olmo Cerri, Maurizio Pierini, Maria Spiropulu, Jean-Roch Vlimant

Abstract: We show how event topology classification based on deep learning could be used to improve the purity of data samples selected in real time at at the Large Hadron Collider. We consider different data representations, on which different kinds of multi-class classifiers are trained. Both raw data and high-level features are utilized. In the considered examples, a filter based on the classifier's scor… ▽ More We show how event topology classification based on deep learning could be used to improve the purity of data samples selected in real time at at the Large Hadron Collider. We consider different data representations, on which different kinds of multi-class classifiers are trained. Both raw data and high-level features are utilized. In the considered examples, a filter based on the classifier's score can be trained to retain ~99% of the interesting events and reduce the false-positive rate by as much as one order of magnitude for certain background processes. By operating such a filter as part of the online event selection infrastructure of the LHC experiments, one could benefit from a more flexible and inclusive selection strategy while reducing the amount of downstream resources wasted in processing false positives. The saved resources could be translated into a reduction of the detector operation cost or into an effective increase of storage and processing capabilities, which could be reinvested to extend the physics reach of the LHC experiments. △ Less

Submitted 2 September, 2019; v1 submitted 29 June, 2018; originally announced July 2018.

Comments: This is a pre-print of an article published in Computing and Software for Big Science. The final authenticated version is available online at: https://doi.org/10.1007/s41781-019-0028-1

Journal ref: Comput Softw Big Sci (2019) 3: 12

An MPI-Based Python Framework for Distributed Training with Keras

Authors: Dustin Anderson, Jean-Roch Vlimant, Maria Spiropulu

Abstract: We present a lightweight Python framework for distributed training of neural networks on multiple GPUs or CPUs. The framework is built on the popular Keras machine learning library. The Message Passing Interface (MPI) protocol is used to coordinate the training process, and the system is well suited for job submission at supercomputing sites. We detail the software's features, describe its use, an… ▽ More We present a lightweight Python framework for distributed training of neural networks on multiple GPUs or CPUs. The framework is built on the popular Keras machine learning library. The Message Passing Interface (MPI) protocol is used to coordinate the training process, and the system is well suited for job submission at supercomputing sites. We detail the software's features, describe its use, and demonstrate its performance on systems of varying sizes on a benchmark problem drawn from high-energy physics research. △ Less

Submitted 15 December, 2017; originally announced December 2017.

Comments: 4 pages, 4 figures, 1 table, DS@HEP, SC17