-
Ultralow friction of ink-jet printed graphene flakes
Authors:
R. Buzio,
A. Gerbi,
S. Uttiya,
C. Bernini,
A. E. Del Rio Castillo,
F. Palazon,
A. S. Siri,
V. Pellegrini,
L. Pellegrino,
F. Bonaccorso
Abstract:
We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies in…
▽ More
We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies indicate reduced surface contamination by solvents after a vacuum annealing procedure. Notably, the printed FLG flakes show ultralow friction comparable with micromechanically exfoliated graphene flakes. Lubricity is retained on flakes with lateral size of a few tens of nanometres, and with thickness as small as ~ 2 nm, confirming the high crystalline quality and low defects density in the FLG basal plane. Surface exposed step edges exhibit the highest friction values, representing preferential sites for originating secondary dissipative processes related to edge straining, wear or lateral displacement of the flakes. Our work demonstrates that LPE enables fundamental studies on graphene friction to the single-flake level. The capability to deliver ultralow-friction-graphene over technologically relevant substrates, using a scalable production route and a high-throughput, large-area printing technique, may also open up new opportunities in the lubrication of micro- and nano-electromechanical systems.
△ Less
Submitted 3 May, 2018;
originally announced May 2018.
-
Programmable Mechanical Resonances in MEMS by Localized Joule Heating of Phase Change Materials
Authors:
Nicola Manca,
Luca Pellegrino,
Teruo Kanki,
Syouta Yamasaki,
Hidekazu Tanaka,
Antonio Sergio Siri,
Daniele Marré
Abstract:
A programmable micromechanical resonator based on a VO2 thin film is reported. Multiple mechanical eigenfrequency states are programmed using Joule heating as local power source, gradually driving the phase transition of VO2 around its Metal-Insulator transition temperature. Phase coexistence of domains is used to tune the stiffness of the device via local control of internal stresses and mechanic…
▽ More
A programmable micromechanical resonator based on a VO2 thin film is reported. Multiple mechanical eigenfrequency states are programmed using Joule heating as local power source, gradually driving the phase transition of VO2 around its Metal-Insulator transition temperature. Phase coexistence of domains is used to tune the stiffness of the device via local control of internal stresses and mechanical properties. This study opens perspectives for developing mechanically configurable nanostructure arrays.
△ Less
Submitted 7 February, 2017;
originally announced February 2017.
-
Grain size determination of superconducting MgB2 powders from magnetization curve, image analysis and surface area measurement
Authors:
Maurizio Vignolo,
Gianmarco Bovone,
Emilio Bellingeri,
Cristina Bernini,
Gennaro Romano,
Mariateresa Buscaglia,
Vincenzo Buscaglia,
Antonio Sergio Siri
Abstract:
The present article reports a method for the average grain size evaluation of superconducting nano-particles through their magnetic properties. The use of SQUID magnetometry to determine the average MgB2 particle size was investigated and the results compared with those achieved through other techniques. In particular the data obtained from zero field cooled magnetization measurement as function o…
▽ More
The present article reports a method for the average grain size evaluation of superconducting nano-particles through their magnetic properties. The use of SQUID magnetometry to determine the average MgB2 particle size was investigated and the results compared with those achieved through other techniques. In particular the data obtained from zero field cooled magnetization measurement as function of the temperature were compared with the results obtained by scanning electron microscopy and Brunauer-Emmett-Teller techniques. The particle magnetization was measured by a commercial SQUID magnetometer in magnetic field (1 mT) and temperatures ranging from 5 to 50 K dispersing the powders in a grease medium. The grain size is obtained by fitting the data taking into account the Ginzburg-Landau temperature dependence of the London penetration depth. Variations on typical modeling parameters were explored in order to gain a better picture of the average grain size and the effectiveness of various measurement techniques. We find that it is possible to use the magnetization measurements to determine the average grain size even if the SEM image analysis allows extracting more information about the grain size distribution. Furthermore a Matlab routine has been developed in order to get automatic analysis of SEM images.
△ Less
Submitted 19 May, 2014;
originally announced May 2014.
-
A novel process to produce amorphous nano-sized B useful for MgB2 phase synthesis
Authors:
Maurizio Vignolo,
Gennaro Romano,
Cristina Bernini,
Alberto Martinelli,
Antonio Sergio Siri
Abstract:
In this paper we report a new synthesis route to produce boron powders characterized as being amorphous and having very fine particle size. This route has been developed to improve the performances of superconducting MgB2 powders, which can be directly synthesized from this nano-structured boron precursor by following the ex-situ or the in-situ P.I.T. method during the manufacturing of tapes, wire…
▽ More
In this paper we report a new synthesis route to produce boron powders characterized as being amorphous and having very fine particle size. This route has been developed to improve the performances of superconducting MgB2 powders, which can be directly synthesized from this nano-structured boron precursor by following the ex-situ or the in-situ P.I.T. method during the manufacturing of tapes, wires and cables. All the procedure steps are explained and the chemical-physical characterization of the boron powder, using x-ray diffraction (Xrd), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques, is reported. Furthermore, a comparison with commercial boron is given. Preliminary results of the magnetic and electrical characterization, such as the critical temperature (TC) and the transport critical current density (JC t), for the MgB2 tape are reported and compared with the tape prepared with commercial boron.
△ Less
Submitted 16 May, 2014;
originally announced May 2014.
-
High temperature heat treatment of B precursor and P.I.T. process optimization to increase Jc performances of MgB2-based conductor
Authors:
Maurizio Vignolo,
Gianmarco Bovone,
Cristina Bernini,
Shrikant Kawale,
Andrea Palenzona,
Gennaro Romano,
Antonio Sergio Siri
Abstract:
Promising results reported in our previous works led us to think that production of B powder plays a crucial role in MgB2 synthesis. A new method for boron preparation has been developed in our laboratory. This particular process is based on magnesiothermic reaction (Moissan process) with the addition of an initial step that gives boron powder with nano-metric grain size. In this paper we report o…
▽ More
Promising results reported in our previous works led us to think that production of B powder plays a crucial role in MgB2 synthesis. A new method for boron preparation has been developed in our laboratory. This particular process is based on magnesiothermic reaction (Moissan process) with the addition of an initial step that gives boron powder with nano-metric grain size. In this paper we report our efforts regarding optimization of PIT method for these nanometric powders and the resolution of problems previously highlighted such as the difficulty in powder packaging and the high friction phenomena occurring during cold working. This increases cracking during the tape and wire manufacturing leading to its failure. Packaging problems are related to the amorphous nature of boron synthesized in our laboratory, so a crystallization treatment was applied to improve crystallinity of B powder. To prevent excessive friction phenomena we synthesized non-stoichiometric MgB2 and using magnesium as lubricant. Our goal is the Jc improvement, but a global physical-chemical characterization was also made to analyze the improvement given by our treatments: this characterization includes X-ray diffraction, resistivity vs. temperature measurement, SEM image, besides magnetic and transport Jc measurements.
△ Less
Submitted 16 May, 2014;
originally announced May 2014.
-
Long- to short-range magnetic order in fluorine-doped CeFeAsO
Authors:
T. Shiroka,
G. Lamura,
S. Sanna,
G. Prando,
R. De Renzi,
M. Tropeano,
M. R. Cimberle,
A. Martinelli,
C. Bernini,
A. Palenzona,
R. Fittipaldi,
A. Vecchione,
P. Carretta,
A. S. Siri,
C. Ferdeghini,
M. Putti
Abstract:
The evolution of the antiferromagnetic order parameter in CeFeAsO_{1-x}F_{x} as a function of the fluorine content x was investigated primarily via zero-field muon-spin spectroscopy. The long-range magnetic order observed in the undoped compound gradually turns into a short-range order at x=0.04, seemingly accompanied/induced by a drastic reduction of the magnetic moment of the iron ions. Supercon…
▽ More
The evolution of the antiferromagnetic order parameter in CeFeAsO_{1-x}F_{x} as a function of the fluorine content x was investigated primarily via zero-field muon-spin spectroscopy. The long-range magnetic order observed in the undoped compound gradually turns into a short-range order at x=0.04, seemingly accompanied/induced by a drastic reduction of the magnetic moment of the iron ions. Superconductivity appears upon a further increase in doping (x>0.04) when, unlike in the cuprates, the Fe magnetic moments become even weaker. The resulting phase diagram evidences the presence of a crossover region, where the superconducting and the magnetic order parameters coexist on a nanoscopic range.
△ Less
Submitted 14 September, 2011;
originally announced September 2011.
-
Cu_{2}O as nonmagnetic semiconductor for spin transport in crystalline oxide electronics
Authors:
I. Pallecchi,
L. Pellegrino,
N. Banerjee,
M. Cantoni,
A. Gadaleta,
A. S. Siri,
D. Marré
Abstract:
We probe spin transport in Cu_{2}O by measuring spin valve effect in La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co and La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/La_{0.7}Sr_{0.3}MnO_{3} epitaxial heterostructures. In La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co systems we find that a fraction of out-of-equilibrium spin polarized carrier actually travel across the Cu_{2}O layer up to distances of almost 100 nm at low temperature.…
▽ More
We probe spin transport in Cu_{2}O by measuring spin valve effect in La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co and La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/La_{0.7}Sr_{0.3}MnO_{3} epitaxial heterostructures. In La_{0.7}Sr_{0.3}MnO_{3}/Cu_{2}O/Co systems we find that a fraction of out-of-equilibrium spin polarized carrier actually travel across the Cu_{2}O layer up to distances of almost 100 nm at low temperature. The corresponding spin diffusion length dspin is estimated around 40 nm. Furthermore, we find that the insertion of a SrTiO_{3} tunneling barrier does not improve spin injection, likely due to the matching of resistances at the interfaces. Our result on dspin may be likely improved, both in terms of Cu_{2}O crystalline quality and sub-micrometric morphology and in terms of device geometry, indicating that Cu_{2}O is a potential material for efficient spin transport in devices based on crystalline oxides.
△ Less
Submitted 19 April, 2010;
originally announced April 2010.
-
High quality epitaxial FeSe0.5Te0.5 thin films grown on SrTiO3 substrates by pulsed laser deposition
Authors:
E. Bellingeri,
R. Buzio,
A. Gerbi,
D. Marre',
S. Congiu,
M. R. Cimberle,
M. Tropeano,
A. S. Siri,
A. Palenzona C. Ferdeghini
Abstract:
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental techniques: X-rays diffraction, reflection high energy electron diffraction, scanning tunnelling microscopy and atomic force microscopy. The substrate temperature dur…
▽ More
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental techniques: X-rays diffraction, reflection high energy electron diffraction, scanning tunnelling microscopy and atomic force microscopy. The substrate temperature during the deposition was found to be the main parameter governing sample morphology and superconducting critical temperature. Films obtained in the optimal conditions show an epitaxial growth with c axis perpendicular to the film surface and the a and b axis parallel to the substrates one, without the evidence of any other orientation. Moreover, such films show a metallic behavior over the whole measured temperature range and critical temperature above 17K, which is higher than the target one.
△ Less
Submitted 17 June, 2009;
originally announced June 2009.
-
Magnetic characterization of undoped and 15%F doped LaFeAsO and SmFeAsO compounds
Authors:
M. R. Cimberle,
F. Canepa,
M. Ferretti,
A. Martinelli,
A. Palenzona,
A. S. Siri,
C. Tarantini,
M. Tropeano,
C. Ferdeghini
Abstract:
In this paper the magnetic behaviour of undoped and 15% F doped SmFeAsO (Sm-1111) and LaFeAsO (La-1111) samples is presented and discussed. Magnetization measurements are not a simple tool to use for the characterisation of the new family of Fe-based superconductors because magnetic impurities can be easily formed during the preparation procedure and may affect the magnetic signal. In spite of t…
▽ More
In this paper the magnetic behaviour of undoped and 15% F doped SmFeAsO (Sm-1111) and LaFeAsO (La-1111) samples is presented and discussed. Magnetization measurements are not a simple tool to use for the characterisation of the new family of Fe-based superconductors because magnetic impurities can be easily formed during the preparation procedure and may affect the magnetic signal. In spite of this problem bulk magnetization measurements, properly treated, may give very useful information. In the undoped samples we gathered the main aspects of the physical behavior of the 1111 phase, i.e. the onset of the Spin Density Wave (SDW), the antiferromagnetic ordering at the Sm sublattice and the susceptibility increase with increasing temperature above the SDW temperature, and, in addition, we were able to estimate the Pauli contribution to susceptibility and therein the Wilson ratio both for LaFeAsO and SmFeAsO compounds, and the amplitude of the jump at the SDW temperature. In the doped samples, while the presence of magnetic signals due to impurities is dominating in the normal state, the superconducting behavior may be clearly observed and studied. In particular, in the Sm-1111 superconducting sample the coexistence-competition between superconductivity and antiferromagnetic ordering of the Sm ions was clearly observed.
△ Less
Submitted 28 April, 2009;
originally announced April 2009.
-
Transport and infrared properties of SmFeAs(O1-xFx): from SDW to superconducting ordering
Authors:
M. Tropeano,
C. Fanciulli,
C. Ferdeghini,
D. Marre',
A. S. Siri,
M. Putti,
A. Martinelli,
M. Ferretti,
A. Palenzona,
M. R. Cimberle,
C. Mirri,
S. Lupi,
R. Sopracase,
P. Calvani,
A. Perucchi
Abstract:
We report measurements of resistivity, magnetoresistivity, Hall effect, Seebeck coefficient, infrared reflectivity of undoped SmFeAsO and lightly doped SmFeAs(O0.93F0.07) oxypnictides. All the properties measured on SmFeAsO are characterized by clear signatures of the magnetic instability. A self-consistent picture emerges in which below the magnetic transition carrier condensation occurs due to…
▽ More
We report measurements of resistivity, magnetoresistivity, Hall effect, Seebeck coefficient, infrared reflectivity of undoped SmFeAsO and lightly doped SmFeAs(O0.93F0.07) oxypnictides. All the properties measured on SmFeAsO are characterized by clear signatures of the magnetic instability. A self-consistent picture emerges in which below the magnetic transition carrier condensation occurs due to the opening of spin density wave (SDW) gap. This is accompanied by the mobility increase of not gapped carriers due to the suppression of electron-electron scattering. SmFeAs(O0.93F0.07) exhibits an increase of the metallic character on cooling consistent with electron doping, even though at room temperature values of all the properties nearly overlaps with those of SmFeAsO. However, with temperature decrease all anomalies related to the SDW instability are missed and the superconducting transition occurs. This suggests that doping breaks abruptly the symmetries of the Fermi surface inhibiting the SDW formation in favor of the superconducting transition, with no substantial changes in the density of states or in the effective mass.
△ Less
Submitted 22 September, 2008;
originally announced September 2008.
-
Magnetic properties of undoped and 15%F doped SmFeAsO compounds
Authors:
R. Cimberle,
C. Ferdeghini,
F. Canepa,
M. Ferretti,
A. Martinelli,
A. Palenzona,
A. S. Siri,
M. Tropeano
Abstract:
In this paper the magnetic behaviour of SmFeAsO and SmFeAs(O0.85F0.15) samples is presented and discussed. Molar susceptibility of SmFeAsO exhibits a local peak at T around 140K due to the establishment of a long range antiferromagnetic ordering of the Fe moments in Fe-As layers. This feature has already been observed with different techniques, and frequently ascribed to the onset of a Spin Dens…
▽ More
In this paper the magnetic behaviour of SmFeAsO and SmFeAs(O0.85F0.15) samples is presented and discussed. Molar susceptibility of SmFeAsO exhibits a local peak at T around 140K due to the establishment of a long range antiferromagnetic ordering of the Fe moments in Fe-As layers. This feature has already been observed with different techniques, and frequently ascribed to the onset of a Spin Density Wave (SDW). At TN around 6K another peak, which we attribute to the establishment of antiferromagnetic ordering of Sm ion sublattice, is observed. Furthermore, a temperature independent signal (Pauli paramagnetism, Landau and core diamagnetism...) is also present in the magnetic behaviour of this sample. In SmFeAs(O0.85F0.15) the antiferromagnetic ordering in Fe-As plane is suppressed and superconductivity occurs at T = 52 K, whereas the antiferromagnetic ordering of Sm ions at low temperature persists, leading to the coexistence and competition between superconducting and magnetic orderings. Above the transition temperature, after the subtraction of the Sm ion sublattice paramagnetic contribution and of the temperature independent contribution to the experimental susceptibility data, a Curie-Weiss behaviour for Fe is observed, with a magnetic moment of 1.4 Bohr magneton.
△ Less
Submitted 10 July, 2008;
originally announced July 2008.
-
Synthesis, crystal structure, microstructure, transport and magnetic properties of SmFeAsO and SmFeAs(O0.93F0.07)
Authors:
A. Martinelli,
M. Ferretti,
P. Manfrinetti,
A. Palenzona,
M. Tropeano,
M. R. Cimberle,
C. Ferdeghini,
R. Valle,
M. Putti,
A. S. Siri
Abstract:
SmFeAsO and the isostructural superconducting SmFeAs(O0.93F0.07) samples were prepared. Characterization by means of Rietveld refinement of X-ray powder diffraction data, scanning electron microscope observation, transmission electron microscope analysis, resistivity and magnetization measurements were carried out. Sintering treatment strongly improves the grain connectivity, but, on the other h…
▽ More
SmFeAsO and the isostructural superconducting SmFeAs(O0.93F0.07) samples were prepared. Characterization by means of Rietveld refinement of X-ray powder diffraction data, scanning electron microscope observation, transmission electron microscope analysis, resistivity and magnetization measurements were carried out. Sintering treatment strongly improves the grain connectivity, but, on the other hand, induces a competition between the thermodynamic stability of the oxy-pnictide and Sm2O3, hence worsening the purity of the sample. In the pristine sample both magnetization and resistivity measurements clearly indicate that two different sources of magnetism are present: the former related to Fe ordering at 140 K and the latter due to the Sm ions that orders antiferromagnetically at low temperature. The feature at 140 K disappears in the F-substituted sample and, at low temperatures a superconducting transition appears. The magnetoresistivity curves of the F-substituted sample probably indicates very high critical field values.
△ Less
Submitted 13 June, 2008;
originally announced June 2008.
-
Effects of neutron irradiation on polycrystalline Mg11B2
Authors:
C. Tarantini,
H. U. Aebersold,
V. Braccini,
G. Celentano,
C. Ferdeghini,
V. Ferrando,
U. Gambardella,
F. Gatti,
E. Lehmann,
P. Manfrinetti,
D. Marre',
A. Palenzona,
I. Pallecchi,
I. Sheikin,
A. S. Siri,
M. Putti
Abstract:
We studied the influence of the disorder introduced in polycrystalline MgB2 samples by neutron irradiation. To circumvent self shielding effects due to the strong interaction between thermal neutrons and 10B we employed isotopically enriched 11B which contains 40 times less 10B than natural B. The comparison of electrical and structural properties of different series of samples irradiated in dif…
▽ More
We studied the influence of the disorder introduced in polycrystalline MgB2 samples by neutron irradiation. To circumvent self shielding effects due to the strong interaction between thermal neutrons and 10B we employed isotopically enriched 11B which contains 40 times less 10B than natural B. The comparison of electrical and structural properties of different series of samples irradiated in different neutron sources, also using Cd shields, allowed us to conclude that, despite the low 10B content, the main damage mechanisms are caused by thermal neutrons, whereas fast neutrons play a minor role. Irradiation leads to an improvement in both upper critical field and critical current density for an exposure level in the range 1-2x1018 cm-2. With increasing fluence the superconducting properties are depressed. An in-depth analysis of the critical field and current density behaviour has been carried out to identify what scattering and pinning mechanisms come into play. Finally the correlation between some characteristic lengths and the transition widths is analysed.
△ Less
Submitted 11 April, 2006; v1 submitted 2 December, 2005;
originally announced December 2005.
-
Enhanced flux pinning in neutron irradiated MgB2
Authors:
I. Pallecchi,
C. Tarantini,
H. U. Aebersold,
V. Braccini,
C. Fanciulli,
C. Ferdeghini,
F. Gatti,
E. Lehmann,
P. Manfrinetti,
D. Marre',
A. Palenzona,
A. S. Siri,
M. Vignolo,
M. Putti
Abstract:
We study the effect of neutron irradiation on the critical current density Jc of isotopically pure polycrystalline Mg11B2 samples. For fluences in the range 1017-1018 cm-2, Jc is enhanced and its dependence on magnetic field is significantly improved: we demonstrate that, in this regime, point-like pinning centers are effectively introduced in the system proportionally to the neutron fluence. In…
▽ More
We study the effect of neutron irradiation on the critical current density Jc of isotopically pure polycrystalline Mg11B2 samples. For fluences in the range 1017-1018 cm-2, Jc is enhanced and its dependence on magnetic field is significantly improved: we demonstrate that, in this regime, point-like pinning centers are effectively introduced in the system proportionally to the neutron fluence. Instead, for larger fluences, a strong suppression of the critical temperature accompanied by a decrease of both the upper critical field Bc2 and Jc is found.
△ Less
Submitted 29 June, 2005;
originally announced June 2005.
-
Critical Field of MGB2 : Crossover from Clean to Dirty Regimes
Authors:
M. Putti,
V. Braccini,
C. Ferdeghini,
I. Pallecchi,
A. S. Siri,
F. Gatti,
P. Manfrinetti,
A. Palenzona
Abstract:
We have studied the upper critical field, Bc2, in poly-crystalline MgB2 samples in which disorder was varied in a controlled way to carry selectively p and s bands from clean to dirty limit. We have found that the clean regime survives when p bands are dirty and s bands are midway between clean and dirty. In this framework we can explain the anomalous behaviour of Al doped samples, in which Bc2…
▽ More
We have studied the upper critical field, Bc2, in poly-crystalline MgB2 samples in which disorder was varied in a controlled way to carry selectively p and s bands from clean to dirty limit. We have found that the clean regime survives when p bands are dirty and s bands are midway between clean and dirty. In this framework we can explain the anomalous behaviour of Al doped samples, in which Bc2 decreases as doping increases.
△ Less
Submitted 20 October, 2003;
originally announced October 2003.
-
Thermal conductivity of MgB$_{2}$ in the superconducting state
Authors:
M. Putti,
V. Braccini,
E. Galleani d'Agliano,
F. Napoli,
I. Pallecchi,
A. S. Siri,
P. Manfrinetti,
A. Palenzona
Abstract:
We present thermal conductivity measurements on very pure and dense bulk samples, as indicated by residual resistivity values as low as 0.5 mW cm and thermal conductivity values higher than 200 W/mK. In the normal state we found that the Wiedemann Franz law, in its generalized form, works well suggesting that phonons do not contribute to the heat transport. The thermal conductivity in the superc…
▽ More
We present thermal conductivity measurements on very pure and dense bulk samples, as indicated by residual resistivity values as low as 0.5 mW cm and thermal conductivity values higher than 200 W/mK. In the normal state we found that the Wiedemann Franz law, in its generalized form, works well suggesting that phonons do not contribute to the heat transport. The thermal conductivity in the superconducting state has been analysed by using a two-gap model. Thank to the large gap anisotropy we were able to evaluate quantitatively intraband scattering relaxation times of $π$ and $σ$ bands, which depend on the disorder in different way; namely, as the disorder increases, it reduces more effectively the relaxation times of $π$ than of $σ$ bands, as suggested by a recent calculation [1].
△ Less
Submitted 8 October, 2002;
originally announced October 2002.
-
Two-band effects in transport properties of MgB2
Authors:
M. Putti,
V. Braccini,
E. Galleani,
F. Napoli,
I. Pallecchi,
A. S. Siri,
P. Manfrinetti,
A. Palenzona
Abstract:
We present resistivity and thermal conductivity measurements on bulk samples, prepared either by a standard method or by a one-step technique. The latter samples, due to their high density and purity, show residual resistivity values as low as 0.5 mW cm and thermal conductivity values as high as 215 W/mK, higher than the single crystal ones. Thermal and electrical data of all the samples are ana…
▽ More
We present resistivity and thermal conductivity measurements on bulk samples, prepared either by a standard method or by a one-step technique. The latter samples, due to their high density and purity, show residual resistivity values as low as 0.5 mW cm and thermal conductivity values as high as 215 W/mK, higher than the single crystal ones. Thermal and electrical data of all the samples are analysed in the framework of the Bloch-Gruneisen equation giving reliable parameter values. In particular the temperature resitivity coefficient, obtained both from resistivity and thermal conductivity, in the dirty sample comes out ten time larger than in the clean ones. This result supports the hypothesis of ref. [1] that p and s bands conduct in parallel, prevailing p conduction in clean samples and s conduction in dirty samples .
△ Less
Submitted 4 October, 2002; v1 submitted 2 October, 2002;
originally announced October 2002.
-
Significant enhancement of irreversibility field in clean-limit bulk MgB2
Authors:
V. Braccini,
L. D. Cooley,
S. Patnaik,
P. Manfrinetti,
A. Palenzona,
A. S. Siri,
D. C. Larbalestier
Abstract:
Low resistivity ("clean") MgB2 bulk samples annealed in Mg vapor show an increase in upper critical field Hc2(T) and irreversibility field Hirr(T) by a factor of 2 in both transport and magnetic measurements. The best sample displayed Hirr above 14 T at 4.2 K and 6 T at 20 K. These changes were accompanied by an increase of the 40 K resistivity from 1.0 to 18 microohm-cm and a lowering of the re…
▽ More
Low resistivity ("clean") MgB2 bulk samples annealed in Mg vapor show an increase in upper critical field Hc2(T) and irreversibility field Hirr(T) by a factor of 2 in both transport and magnetic measurements. The best sample displayed Hirr above 14 T at 4.2 K and 6 T at 20 K. These changes were accompanied by an increase of the 40 K resistivity from 1.0 to 18 microohm-cm and a lowering of the resistivity ratio from 15 to 3, while the critical temperature Tc decreased by only 1-2 K. These results point the way to make prepare MgB2 attractive for magnet applications.
△ Less
Submitted 12 August, 2002; v1 submitted 3 August, 2002;
originally announced August 2002.
-
In-situ Magnesium Diboride Superconducting Thin Films grown by Pulsed Laser Deposition
Authors:
G. Grassano,
W. Ramadan,
V. Ferrando,
E. Bellingeri,
D. Marre',
C. Ferdeghini,
G. Grasso,
M. Putti,
A. S. Siri,
P. Manfrinetti,
A Palenzona,
A. Chincarini
Abstract:
Superconducting thin films of MgB2 were deposited by Pulsed Laser Deposition on magnesium oxide and sapphire substrates. Samples grown at 450C in an argon buffer pressure of about 10-2 mbar by using a magnesium enriched target resulted to be superconducting with a transition temperature of about 25 K. Film deposited from a MgB2 sintered pellet target in ultra high vacuum conditions showed poor m…
▽ More
Superconducting thin films of MgB2 were deposited by Pulsed Laser Deposition on magnesium oxide and sapphire substrates. Samples grown at 450C in an argon buffer pressure of about 10-2 mbar by using a magnesium enriched target resulted to be superconducting with a transition temperature of about 25 K. Film deposited from a MgB2 sintered pellet target in ultra high vacuum conditions showed poor metallic or weak semiconducting behavior and they became superconducting only after an ex-situ annealing in Mg vapor atmosphere. Up to now, no difference in the superconducting properties of the films obtained by these two procedures has been evidenced.
△ Less
Submitted 28 March, 2001; v1 submitted 27 March, 2001;
originally announced March 2001.
-
Large transport critical currents in unsintered MgB2 superconducting tapes
Authors:
G. Grasso,
A. Malagoli,
C. Ferdeghini,
S. Roncallo,
V. Braccini,
M. R. Cimberle,
A. S. Siri
Abstract:
The Powder-In-Tube process has been employed to fabricate tape-like conductors with a strong metallic sheath and based on the newly discovered MgB2 superconducting phase. Long superconducting tapes have been prepared by packing reacted MgB2 powders inside pure Ag, Cu and Ni tubes which are then cold worked by drawing and rolling. Such tapes have shown transport properties as good as bulk MgB2 sa…
▽ More
The Powder-In-Tube process has been employed to fabricate tape-like conductors with a strong metallic sheath and based on the newly discovered MgB2 superconducting phase. Long superconducting tapes have been prepared by packing reacted MgB2 powders inside pure Ag, Cu and Ni tubes which are then cold worked by drawing and rolling. Such tapes have shown transport properties as good as bulk MgB2 samples sintered in high pressure and high temperature conditions. At 4.2 K, the highest critical current density of 100000 A/cm2 has been achieved on Nickel-sheathed single-filament conductors. A direct correlation between the sheath tensile strength and the critical current of the unsintered tape has been observed.
△ Less
Submitted 21 May, 2001; v1 submitted 27 March, 2001;
originally announced March 2001.