Showing 1–50 of 143 results for author: Seo, K

COSINE-100U: Upgrading the COSINE-100 Experiment for Enhanced Sensitivity to Low-Mass Dark Matter Detection

Authors: D. H. Lee, J. Y. Cho, C. Ha, E. J. Jeon, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. J. Ko, H. Lee, H. S. Lee, I. S. Lee, J. Lee, S. H. Lee, S. M. Lee, R. H. Maruyama, J. C. Park, K. S. Park, K. Park, S. D. Park, K. M. Seo, M. K. Son , et al. (1 additional authors not shown)

Abstract: An upgrade of the COSINE-100 experiment, COSINE-100U, has been prepared for installation at Yemilab, a new underground laboratory in Korea, following 6.4 years of operation at the Yangyang Underground Laboratory. The COSINE-100 experiment aimed to investigate the annual modulation signals reported by the DAMA/LIBRA but observed a null result, revealing a more than 3$σ$ discrepancy. COSINE-100U see… ▽ More An upgrade of the COSINE-100 experiment, COSINE-100U, has been prepared for installation at Yemilab, a new underground laboratory in Korea, following 6.4 years of operation at the Yangyang Underground Laboratory. The COSINE-100 experiment aimed to investigate the annual modulation signals reported by the DAMA/LIBRA but observed a null result, revealing a more than 3$σ$ discrepancy. COSINE-100U seeks to explore new parameter spaces for dark matter detection using NaI(Tl) detectors. All eight NaI(Tl) crystals, with a total mass of 99.1 kg, have been upgraded to improve light collection efficiency, significantly enhancing dark matter detection sensitivity. This paper describes the detector upgrades, performance improvements, and the enhanced sensitivity to low-mass dark matter detection in the COSINE-100U experiment. △ Less

Submitted 24 September, 2024; originally announced September 2024.

Comments: 14 pages, 17 figures

Dynamical behavior of passive particles with harmonic, viscous, and correlated Gaussian forces

Authors: Jae Won Jung, Sung Kyu Seo, Kyungsik Kim

Abstract: In this paper, we study the Navier-Stokes equation and the Burgers equation for the dynamical motion of a passive particle with harmonic and viscous forces, subject to an exponentially correlated Gaussian force. As deriving the Fokker-Planck equation for the joint probability density of a passive particle, we find obviously the important solution of the joint probability density by using double Fo… ▽ More In this paper, we study the Navier-Stokes equation and the Burgers equation for the dynamical motion of a passive particle with harmonic and viscous forces, subject to an exponentially correlated Gaussian force. As deriving the Fokker-Planck equation for the joint probability density of a passive particle, we find obviously the important solution of the joint probability density by using double Fourier transforms in three-time domains, and the moments from derived moment equation are numerically calculated. As a result, the dynamical motion of a passive particle with respect to the probability density having two variables of displacement and velocity in the short-time domain has a super-diffusive form, whereas the distribution in the long-time domain is obtained to be Gaussian by analyzing only from the velocity probability density. △ Less

Submitted 21 September, 2024; originally announced September 2024.

Comments: 10 pages, 5 tables

On the motion of passive and active particles with harmonic and viscous forces

Authors: Jae-Won Jung, Sung Kyu Seo, Kyungsik Kim

Abstract: In this paper, we solve the joint probability density for the passive and active particles with harmonic, viscous, and perturbative forces. After deriving the Fokker-Planck equation for a passive and a run-and-tumble particles, we approximately get and analyze the solution for the joint distribution density subject to an exponential correlated Gaussian force in three kinds of time limit domains. M… ▽ More In this paper, we solve the joint probability density for the passive and active particles with harmonic, viscous, and perturbative forces. After deriving the Fokker-Planck equation for a passive and a run-and-tumble particles, we approximately get and analyze the solution for the joint distribution density subject to an exponential correlated Gaussian force in three kinds of time limit domains. Mean squared displacement (velocity) for a particle with harmonic and viscous forces behaviors in the form of super-diffusion, consistent with a particle having viscous and perturbative forces. A passive particle with both harmonic, viscous forces and viscous, perturbative forces has the Gaussian form with mean squared velocity ~t. Particularly, In our case of a run-and-tumble particle, the mean squared displacement scales as super-diffusion, while the mean squared velocity has a normal diffusive form.In addition, the kurtosis, the correlation coefficient, and the moment from moment equation are numerically calculated. △ Less

Submitted 8 September, 2024; originally announced September 2024.

Comments: 20 pages, 3 Tables. arXiv admin note: text overlap with arXiv:2409.02401

Joint probability density with radial, tangential, and perturbative forces

Authors: Jae-Won Jung, Sung Kyu Seo, Sungchul Kwon, Kyungsik Kim

Abstract: We study the Fokker-Planck equation for an active particle with both the radial and tangential forces and the perturbative force. We find the solution of the joint probability density. In the limit of the long-time domain and for the characteristic time=0 domain, the mean squared radial velocity for an active particle leads to a super-diffusive distribution, while the mean squared tangential veloc… ▽ More We study the Fokker-Planck equation for an active particle with both the radial and tangential forces and the perturbative force. We find the solution of the joint probability density. In the limit of the long-time domain and for the characteristic time=0 domain, the mean squared radial velocity for an active particle leads to a super-diffusive distribution, while the mean squared tangential velocity with both the radial and tangential forces and the perturbative force behaviors as the Gaussian diffusion. Compared with the self-propelled particle, the mean squared tangential velocity is matched with the same value to the time ~t^2, while the mean squared radial velocity is the same as the time ~t. △ Less

Submitted 11 October, 2024; v1 submitted 4 September, 2024; originally announced September 2024.

Comments: 10 pages, 2 Tables

Joint probability densities of an active particle coupled to two heat reservoirs

Authors: Jae-Won Jung, Sung Kyu Seo, Kyungsik Kim

Abstract: We derive a Fokker-Planck equation for joint probability density for an active particle coupled two heat reservoirs with harmonic, viscous, random forces. The approximate solution for the joint distribution density of all-to-all and three others topologies is solved, which apply an exponential correlated Gaussian force in three-time regions of correlation time. Mean squared displacement, velocity… ▽ More We derive a Fokker-Planck equation for joint probability density for an active particle coupled two heat reservoirs with harmonic, viscous, random forces. The approximate solution for the joint distribution density of all-to-all and three others topologies is solved, which apply an exponential correlated Gaussian force in three-time regions of correlation time. Mean squared displacement, velocity behaviors in the form of super-diffusion, while the mean squared displacement, velocity has the Gaussian form, normal diffusion. Concomitantly, the Kurtosis, correlation coefficient, and moment from moment equation are approximately and numerically calculated. In this paper, we derive an altered Fokker-Planck equation for an active particle with the harmonic, viscous, and random forces, coupled to two heat reservoirs. We attain the solution for the joint distribution density of our topology, including the center topology, the ring topology, and the chain topology, subject to an exponential correlated Gaussian force. The mean squared displacement and the mean squared velocity behavior as the super-diffusions in the short-time domain and for the characteristic time=0, while those have the Gaussian forms in the long-time domain and for the characteristic time=0. We concomitantly calculate and analyze the non-equilibrium characteristics of the kurtosis, the correlation coefficient, and the moment from the derived moment equation. △ Less

Submitted 11 October, 2024; v1 submitted 3 September, 2024; originally announced September 2024.

Comments: 10 pages, 1 Figure, 3 Tables

Joint probability density of a passive article with force and magnetic field

Authors: Jae-Won Jung, Sung Kyu Seo, Kyungsik Kim

Abstract: We firstly study the Navier-Stokes equation for the motion of a passive particle with harmonic, viscous, perturbative forces, subject to an exponentially correlated Gaussian force. Secondly, from the Fokker-Planck equation in an incompressible conducting fluid of magnetic field, we approximately obtain the solution of the joint probability density by using double Fourier transforms in three-time d… ▽ More We firstly study the Navier-Stokes equation for the motion of a passive particle with harmonic, viscous, perturbative forces, subject to an exponentially correlated Gaussian force. Secondly, from the Fokker-Planck equation in an incompressible conducting fluid of magnetic field, we approximately obtain the solution of the joint probability density by using double Fourier transforms in three-time domains. In addition, the kurtosis, the correlation coefficient, and the moment from moment equation are numerically calculated. △ Less

Submitted 3 September, 2024; originally announced September 2024.

Comments: 19 pages, 5 Tables

Exciton Fission Enhanced Silicon Solar Cell

Authors: Narumi Nagaya, Kangmin Lee, Collin F. Perkinson, Aaron Li, Youri Lee, Xinjue Zhong, Sujin Lee, Leah P. Weisburn, Tomi K. Baikie, Moungi G. Bawendi, Troy Van Voorhis, William A. Tisdale, Antoine Kahn, Kwanyong Seo, Marc A. Baldo

Abstract: While silicon solar cells dominate global photovoltaic energy production, their continued improvement is hindered by the single junction limit. One potential solution is to use molecular singlet exciton fission to generate two electrons from each absorbed high-energy photon. We demonstrate that the long-standing challenge of coupling molecular excited states to silicon solar cells can be overcome… ▽ More While silicon solar cells dominate global photovoltaic energy production, their continued improvement is hindered by the single junction limit. One potential solution is to use molecular singlet exciton fission to generate two electrons from each absorbed high-energy photon. We demonstrate that the long-standing challenge of coupling molecular excited states to silicon solar cells can be overcome using sequential charge transfer. Combining zinc phthalocyanine, aluminum oxide, and a shallow junction crystalline silicon microwire solar cell, the peak charge generation efficiency per photon absorbed in tetracene is (138 +- 6)%, comfortably surpassing the quantum efficiency limit for conventional silicon solar cells and establishing a new, scalable approach to low cost, high efficiency photovoltaics. △ Less

Submitted 30 July, 2024; originally announced July 2024.

Comments: 34 pages, 14 figures

Development of MMC-based lithium molybdate cryogenic calorimeters for AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, H. Bae, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, S. Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev , et al. (84 additional authors not shown)

Abstract: The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is und… ▽ More The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is under construction.This paper discusses the baseline design and characterization of the lithium molybdate cryogenic calorimeters to be used in the AMoRE-II detector modules. The results from prototype setups that incorporate new housing structures and two different crystal masses (316 g and 517 - 521 g), operated at 10 mK temperature, show energy resolutions (FWHM) of 7.55 - 8.82 keV at the 2.615 MeV $^{208}$Tl $γ$ line, and effective light detection of 0.79 - 0.96 keV/MeV. The simultaneous heat and light detection enables clear separation of alpha particles with a discrimination power of 12.37 - 19.50 at the energy region around $^6$Li(n, $α$)$^3$H with Q-value = 4.785 MeV. Promising detector performances were demonstrated at temperatures as high as 30 mK, which relaxes the temperature constraints for operating the large AMoRE-II array. △ Less

Submitted 16 July, 2024; originally announced July 2024.

Revisiting the Impact of Pursuing Modularity for Code Generation

Authors: Deokyeong Kang, Ki Jung Seo, Taeuk Kim

Abstract: Modular programming, which aims to construct the final program by integrating smaller, independent building blocks, has been regarded as a desirable practice in software development. However, with the rise of recent code generation agents built upon large language models (LLMs), a question emerges: is this traditional practice equally effective for these new tools? In this work, we assess the impa… ▽ More Modular programming, which aims to construct the final program by integrating smaller, independent building blocks, has been regarded as a desirable practice in software development. However, with the rise of recent code generation agents built upon large language models (LLMs), a question emerges: is this traditional practice equally effective for these new tools? In this work, we assess the impact of modularity in code generation by introducing a novel metric for its quantitative measurement. Surprisingly, unlike conventional wisdom on the topic, we find that modularity is not a core factor for improving the performance of code generation models. We also explore potential explanations for why LLMs do not exhibit a preference for modular code compared to non-modular code. △ Less

Submitted 7 October, 2024; v1 submitted 16 July, 2024; originally announced July 2024.

Comments: EMNLP 2024 Findings

Improved limit on neutrinoless double beta decay of \mohundred~from AMoRE-I

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (83 additional authors not shown)

Abstract: AMoRE searches for the signature of neutrinoless double beta decay of $^{100}$Mo with a 100 kg sample of enriched $^{100}$Mo. Scintillating molybdate crystals coupled with a metallic magnetic calorimeter operate at milli-Kelvin temperatures to measure the energy of electrons emitted in the decay. As a demonstration of the full-scale AMoRE, we conducted AMoRE-I, a pre-experiment with 18 molybdate c… ▽ More AMoRE searches for the signature of neutrinoless double beta decay of $^{100}$Mo with a 100 kg sample of enriched $^{100}$Mo. Scintillating molybdate crystals coupled with a metallic magnetic calorimeter operate at milli-Kelvin temperatures to measure the energy of electrons emitted in the decay. As a demonstration of the full-scale AMoRE, we conducted AMoRE-I, a pre-experiment with 18 molybdate crystals, at the Yangyang Underground Laboratory for over two years. The exposure was 8.02 kg$\cdot$year (or 3.89 kg$_{\mathrm{^{100}Mo}}\cdot$year) and the total background rate near the Q-value was 0.025 $\pm$ 0.002 counts/keV/kg/year. We observed no indication of $0νββ$ decay and report a new lower limit of the half-life of $^{100}$Mo $0νββ$ decay as $ T^{0ν}_{1/2}>3.0\times10^{24}~\mathrm{years}$ at 90\% confidence level. The effective Majorana mass limit range is $m_{ββ}<$(210--610) meV using nuclear matrix elements estimated in the framework of different models, including the recent shell model calculations. △ Less

Submitted 8 July, 2024; originally announced July 2024.

Comments: 7 pages, 4 figures

Unveiling Implicit Table Knowledge with Question-Then-Pinpoint Reasoner for Insightful Table Summarization

Authors: Kwangwook Seo, Jinyoung Yeo, Dongha Lee

Abstract: Implicit knowledge hidden within the explicit table cells, such as data insights, is the key to generating a high-quality table summary. However, unveiling such implicit knowledge is a non-trivial task. Due to the complex nature of structured tables, it is challenging even for large language models (LLMs) to mine the implicit knowledge in an insightful and faithful manner. To address this challeng… ▽ More Implicit knowledge hidden within the explicit table cells, such as data insights, is the key to generating a high-quality table summary. However, unveiling such implicit knowledge is a non-trivial task. Due to the complex nature of structured tables, it is challenging even for large language models (LLMs) to mine the implicit knowledge in an insightful and faithful manner. To address this challenge, we propose a novel table reasoning framework Question-then-Pinpoint. Our work focuses on building a plug-and-play table reasoner that can self-question the insightful knowledge and answer it by faithfully pinpointing evidence on the table to provide explainable guidance for the summarizer. To train a reliable reasoner, we collect table knowledge by guiding a teacher LLM to follow the coarse-to-fine reasoning paths and refine it through two quality enhancement strategies to selectively distill the high-quality knowledge to the reasoner. Extensive experiments on two table summarization datasets, including our newly proposed InsTaSumm, validate the general effectiveness of our framework. △ Less

Submitted 1 October, 2024; v1 submitted 18 June, 2024; originally announced June 2024.

Comments: Accepted to EMNLP 2024 Findings

Projected background and sensitivity of AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (81 additional authors not shown)

Abstract: AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap… ▽ More AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study. △ Less

Submitted 14 October, 2024; v1 submitted 13 June, 2024; originally announced June 2024.

NeRFFaceSpeech: One-shot Audio-driven 3D Talking Head Synthesis via Generative Prior

Authors: Gihoon Kim, Kwanggyoon Seo, Sihun Cha, Junyong Noh

Abstract: Audio-driven talking head generation is advancing from 2D to 3D content. Notably, Neural Radiance Field (NeRF) is in the spotlight as a means to synthesize high-quality 3D talking head outputs. Unfortunately, this NeRF-based approach typically requires a large number of paired audio-visual data for each identity, thereby limiting the scalability of the method. Although there have been attempts to… ▽ More Audio-driven talking head generation is advancing from 2D to 3D content. Notably, Neural Radiance Field (NeRF) is in the spotlight as a means to synthesize high-quality 3D talking head outputs. Unfortunately, this NeRF-based approach typically requires a large number of paired audio-visual data for each identity, thereby limiting the scalability of the method. Although there have been attempts to generate audio-driven 3D talking head animations with a single image, the results are often unsatisfactory due to insufficient information on obscured regions in the image. In this paper, we mainly focus on addressing the overlooked aspect of 3D consistency in the one-shot, audio-driven domain, where facial animations are synthesized primarily in front-facing perspectives. We propose a novel method, NeRFFaceSpeech, which enables to produce high-quality 3D-aware talking head. Using prior knowledge of generative models combined with NeRF, our method can craft a 3D-consistent facial feature space corresponding to a single image. Our spatial synchronization method employs audio-correlated vertex dynamics of a parametric face model to transform static image features into dynamic visuals through ray deformation, ensuring realistic 3D facial motion. Moreover, we introduce LipaintNet that can replenish the lacking information in the inner-mouth area, which can not be obtained from a given single image. The network is trained in a self-supervised manner by utilizing the generative capabilities without additional data. The comprehensive experiments demonstrate the superiority of our method in generating audio-driven talking heads from a single image with enhanced 3D consistency compared to previous approaches. In addition, we introduce a quantitative way of measuring the robustness of a model against pose changes for the first time, which has been possible only qualitatively. △ Less

Submitted 10 May, 2024; v1 submitted 9 May, 2024; originally announced May 2024.

Comments: 11 pages, 5 figures

HyperCLOVA X Technical Report

Authors: Kang Min Yoo, Jaegeun Han, Sookyo In, Heewon Jeon, Jisu Jeong, Jaewook Kang, Hyunwook Kim, Kyung-Min Kim, Munhyong Kim, Sungju Kim, Donghyun Kwak, Hanock Kwak, Se Jung Kwon, Bado Lee, Dongsoo Lee, Gichang Lee, Jooho Lee, Baeseong Park, Seongjin Shin, Joonsang Yu, Seolki Baek, Sumin Byeon, Eungsup Cho, Dooseok Choe, Jeesung Han , et al. (371 additional authors not shown)

Abstract: We introduce HyperCLOVA X, a family of large language models (LLMs) tailored to the Korean language and culture, along with competitive capabilities in English, math, and coding. HyperCLOVA X was trained on a balanced mix of Korean, English, and code data, followed by instruction-tuning with high-quality human-annotated datasets while abiding by strict safety guidelines reflecting our commitment t… ▽ More We introduce HyperCLOVA X, a family of large language models (LLMs) tailored to the Korean language and culture, along with competitive capabilities in English, math, and coding. HyperCLOVA X was trained on a balanced mix of Korean, English, and code data, followed by instruction-tuning with high-quality human-annotated datasets while abiding by strict safety guidelines reflecting our commitment to responsible AI. The model is evaluated across various benchmarks, including comprehensive reasoning, knowledge, commonsense, factuality, coding, math, chatting, instruction-following, and harmlessness, in both Korean and English. HyperCLOVA X exhibits strong reasoning capabilities in Korean backed by a deep understanding of the language and cultural nuances. Further analysis of the inherent bilingual nature and its extension to multilingualism highlights the model's cross-lingual proficiency and strong generalization ability to untargeted languages, including machine translation between several language pairs and cross-lingual inference tasks. We believe that HyperCLOVA X can provide helpful guidance for regions or countries in developing their sovereign LLMs. △ Less

Submitted 13 April, 2024; v1 submitted 2 April, 2024; originally announced April 2024.

Comments: 44 pages; updated authors list and fixed author names

LeGO: Leveraging a Surface Deformation Network for Animatable Stylized Face Generation with One Example

Authors: Soyeon Yoon, Kwan Yun, Kwanggyoon Seo, Sihun Cha, Jung Eun Yoo, Junyong Noh

Abstract: Recent advances in 3D face stylization have made significant strides in few to zero-shot settings. However, the degree of stylization achieved by existing methods is often not sufficient for practical applications because they are mostly based on statistical 3D Morphable Models (3DMM) with limited variations. To this end, we propose a method that can produce a highly stylized 3D face model with de… ▽ More Recent advances in 3D face stylization have made significant strides in few to zero-shot settings. However, the degree of stylization achieved by existing methods is often not sufficient for practical applications because they are mostly based on statistical 3D Morphable Models (3DMM) with limited variations. To this end, we propose a method that can produce a highly stylized 3D face model with desired topology. Our methods train a surface deformation network with 3DMM and translate its domain to the target style using a paired exemplar. The network achieves stylization of the 3D face mesh by mimicking the style of the target using a differentiable renderer and directional CLIP losses. Additionally, during the inference process, we utilize a Mesh Agnostic Encoder (MAGE) that takes deformation target, a mesh of diverse topologies as input to the stylization process and encodes its shape into our latent space. The resulting stylized face model can be animated by commonly used 3DMM blend shapes. A set of quantitative and qualitative evaluations demonstrate that our method can produce highly stylized face meshes according to a given style and output them in a desired topology. We also demonstrate example applications of our method including image-based stylized avatar generation, linear interpolation of geometric styles, and facial animation of stylized avatars. △ Less

Submitted 22 March, 2024; originally announced March 2024.

Comments: 8 pages

MSC Class: 68T45 ACM Class: I.4.9

StyleCineGAN: Landscape Cinemagraph Generation using a Pre-trained StyleGAN

Authors: Jongwoo Choi, Kwanggyoon Seo, Amirsaman Ashtari, Junyong Noh

Abstract: We propose a method that can generate cinemagraphs automatically from a still landscape image using a pre-trained StyleGAN. Inspired by the success of recent unconditional video generation, we leverage a powerful pre-trained image generator to synthesize high-quality cinemagraphs. Unlike previous approaches that mainly utilize the latent space of a pre-trained StyleGAN, our approach utilizes its d… ▽ More We propose a method that can generate cinemagraphs automatically from a still landscape image using a pre-trained StyleGAN. Inspired by the success of recent unconditional video generation, we leverage a powerful pre-trained image generator to synthesize high-quality cinemagraphs. Unlike previous approaches that mainly utilize the latent space of a pre-trained StyleGAN, our approach utilizes its deep feature space for both GAN inversion and cinemagraph generation. Specifically, we propose multi-scale deep feature warping (MSDFW), which warps the intermediate features of a pre-trained StyleGAN at different resolutions. By using MSDFW, the generated cinemagraphs are of high resolution and exhibit plausible looping animation. We demonstrate the superiority of our method through user studies and quantitative comparisons with state-of-the-art cinemagraph generation methods and a video generation method that uses a pre-trained StyleGAN. △ Less

Submitted 21 March, 2024; originally announced March 2024.

Comments: Project website: https://jeolpyeoni.github.io/stylecinegan_project/

Stylized Face Sketch Extraction via Generative Prior with Limited Data

Authors: Kwan Yun, Kwanggyoon Seo, Chang Wook Seo, Soyeon Yoon, Seongcheol Kim, Soohyun Ji, Amirsaman Ashtari, Junyong Noh

Abstract: Facial sketches are both a concise way of showing the identity of a person and a means to express artistic intention. While a few techniques have recently emerged that allow sketches to be extracted in different styles, they typically rely on a large amount of data that is difficult to obtain. Here, we propose StyleSketch, a method for extracting high-resolution stylized sketches from a face image… ▽ More Facial sketches are both a concise way of showing the identity of a person and a means to express artistic intention. While a few techniques have recently emerged that allow sketches to be extracted in different styles, they typically rely on a large amount of data that is difficult to obtain. Here, we propose StyleSketch, a method for extracting high-resolution stylized sketches from a face image. Using the rich semantics of the deep features from a pretrained StyleGAN, we are able to train a sketch generator with 16 pairs of face and the corresponding sketch images. The sketch generator utilizes part-based losses with two-stage learning for fast convergence during training for high-quality sketch extraction. Through a set of comparisons, we show that StyleSketch outperforms existing state-of-the-art sketch extraction methods and few-shot image adaptation methods for the task of extracting high-resolution abstract face sketches. We further demonstrate the versatility of StyleSketch by extending its use to other domains and explore the possibility of semantic editing. The project page can be found in https://kwanyun.github.io/stylesketch_project. △ Less

Submitted 17 March, 2024; originally announced March 2024.

Comments: 14 pages

MSC Class: 68T45 ACM Class: I.4.9

Radon Concentration Measurement with a High-Sensitivity Radon Detector at the Yemilab

Authors: Kyungmin Seo, Hyunsoo Kim, Yeongduk Kim, Hyeyoung Lee, Jaison Lee, Moo Hyun Lee, Jungho So, Sangcheol Yoon, Youngsoo Yoon

Abstract: The radiation emitted from radon is a critical background in rare event search experiments conducted at the Yemi Underground Laboratory (Yemilab) in Jeongseon, Korea. A Radon Reduction System(RRS) has been developed and installed in Yemilab to reduce radon concentration in the air. The RRS primarily provides a purified air of 50 m3/h to the cleanroom used to assemble crystal detectors in the AMoRE… ▽ More The radiation emitted from radon is a critical background in rare event search experiments conducted at the Yemi Underground Laboratory (Yemilab) in Jeongseon, Korea. A Radon Reduction System(RRS) has been developed and installed in Yemilab to reduce radon concentration in the air. The RRS primarily provides a purified air of 50 m3/h to the cleanroom used to assemble crystal detectors in the AMoRE, a neutrinoless double beta decay search experiment. RRS can reduce the radon level by a factor of 300, so a high-sensitivity radon detector was required. A highly sensitive radon detector was constructed using a 70 L chamber with a large PIN photodiode to measure radon concentration in the purified air. The radon detector shows an excellent resolution of 72 keV (FWHM) for 6.003 MeV alphas from 218Po decay and a sensitivity down to 23.8 +- 2.1 mBq/m3 with a boil-off N2 gas sample. The radon concentration level from the RRS measured by the radon detector was below 0.29 Bq/m3 with a reduction factor of about 300. △ Less

Submitted 7 May, 2024; v1 submitted 12 March, 2024; originally announced March 2024.

Comments: 16 pages, 12 figures, 2 tables, to be published in JINST

VerifiNER: Verification-augmented NER via Knowledge-grounded Reasoning with Large Language Models

Authors: Seoyeon Kim, Kwangwook Seo, Hyungjoo Chae, Jinyoung Yeo, Dongha Lee

Abstract: Recent approaches in domain-specific named entity recognition (NER), such as biomedical NER, have shown remarkable advances. However, they still lack of faithfulness, producing erroneous predictions. We assume that knowledge of entities can be useful in verifying the correctness of the predictions. Despite the usefulness of knowledge, resolving such errors with knowledge is nontrivial, since the k… ▽ More Recent approaches in domain-specific named entity recognition (NER), such as biomedical NER, have shown remarkable advances. However, they still lack of faithfulness, producing erroneous predictions. We assume that knowledge of entities can be useful in verifying the correctness of the predictions. Despite the usefulness of knowledge, resolving such errors with knowledge is nontrivial, since the knowledge itself does not directly indicate the ground-truth label. To this end, we propose VerifiNER, a post-hoc verification framework that identifies errors from existing NER methods using knowledge and revises them into more faithful predictions. Our framework leverages the reasoning abilities of large language models to adequately ground on knowledge and the contextual information in the verification process. We validate effectiveness of VerifiNER through extensive experiments on biomedical datasets. The results suggest that VerifiNER can successfully verify errors from existing models as a model-agnostic approach. Further analyses on out-of-domain and low-resource settings show the usefulness of VerifiNER on real-world applications. △ Less

Submitted 8 June, 2024; v1 submitted 28 February, 2024; originally announced February 2024.

Comments: Accepted to ACL 2024

Background study of the AMoRE-pilot experiment

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Yu. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (83 additional authors not shown)

Abstract: We report a study on the background of the Advanced Molybdenum-Based Rare process Experiment (AMoRE), a search for neutrinoless double beta decay (\znbb) of $^{100}$Mo. The pilot stage of the experiment was conducted using $\sim$1.9 kg of \CAMOO~ crystals at the Yangyang Underground Laboratory, South Korea, from 2015 to 2018. We compared the measured $β/γ$ energy spectra in three experimental conf… ▽ More We report a study on the background of the Advanced Molybdenum-Based Rare process Experiment (AMoRE), a search for neutrinoless double beta decay (\znbb) of $^{100}$Mo. The pilot stage of the experiment was conducted using $\sim$1.9 kg of \CAMOO~ crystals at the Yangyang Underground Laboratory, South Korea, from 2015 to 2018. We compared the measured $β/γ$ energy spectra in three experimental configurations with the results of Monte Carlo simulations and identified the background sources in each configuration. We replaced several detector components and enhanced the neutron shielding to lower the background level between configurations. A limit on the half-life of $0νββ$ decay of $^{100}$Mo was found at $T_{1/2}^{0ν} \ge 3.0\times 10^{23}$ years at 90\% confidence level, based on the measured background and its modeling. Further reduction of the background rate in the AMoRE-I and AMoRE-II are discussed. △ Less

Submitted 7 April, 2024; v1 submitted 15 January, 2024; originally announced January 2024.

Representative Feature Extraction During Diffusion Process for Sketch Extraction with One Example

Authors: Kwan Yun, Youngseo Kim, Kwanggyoon Seo, Chang Wook Seo, Junyong Noh

Abstract: We introduce DiffSketch, a method for generating a variety of stylized sketches from images. Our approach focuses on selecting representative features from the rich semantics of deep features within a pretrained diffusion model. This novel sketch generation method can be trained with one manual drawing. Furthermore, efficient sketch extraction is ensured by distilling a trained generator into a st… ▽ More We introduce DiffSketch, a method for generating a variety of stylized sketches from images. Our approach focuses on selecting representative features from the rich semantics of deep features within a pretrained diffusion model. This novel sketch generation method can be trained with one manual drawing. Furthermore, efficient sketch extraction is ensured by distilling a trained generator into a streamlined extractor. We select denoising diffusion features through analysis and integrate these selected features with VAE features to produce sketches. Additionally, we propose a sampling scheme for training models using a conditional generative approach. Through a series of comparisons, we verify that distilled DiffSketch not only outperforms existing state-of-the-art sketch extraction methods but also surpasses diffusion-based stylization methods in the task of extracting sketches. △ Less

Submitted 9 January, 2024; originally announced January 2024.

Comments: 8 pages(main paper), 8 pages(supplementary material)

MSC Class: 68T01 ACM Class: I.4.9

Strongly Interacting Phases in Twisted Bilayer Graphene at the Magic Angle

Authors: Khagendra Adhikari, Kangjun Seo, K. S. D. Beach, Bruno Uchoa

Abstract: Twisted bilayer graphene near the magic angle is known to have a cascade of insulating phases at integer filling factors of the low-energy bands. In this Letter we address the nature of these phases through an unrestricted, large-scale Hartree-Fock calculation on the lattice that self-consistently accounts for all electronic bands. Using numerically unbiased methods, we show that Coulomb interacti… ▽ More Twisted bilayer graphene near the magic angle is known to have a cascade of insulating phases at integer filling factors of the low-energy bands. In this Letter we address the nature of these phases through an unrestricted, large-scale Hartree-Fock calculation on the lattice that self-consistently accounts for all electronic bands. Using numerically unbiased methods, we show that Coulomb interactions produce ferromagnetic insulating states at integer fillings $ν\in[-3,3]$ with maximal spin polarization $M_{\text{FM}}=4-|ν|$. We find that the $ν=0$ state is a pure ferromagnet, whereas all other insulating states are spin-valley polarized. At odd filling factors $|ν|=1,3$ those states have a quantum anomalous Hall effect with Chern number $\mathcal{C}=1$. Except for the $ν=0,-2$ states, all other integer fillings have insulating phases with additional sublattice symmetry breaking and antiferromagnetism in the remote bands. We map the metal-insulator transitions of these phases as a function of the effective dielectric constant. Our results establish the importance of large-scale lattice calculations to faithfully determine the ground states of TBG at integer fillings. △ Less

Submitted 12 March, 2024; v1 submitted 7 August, 2023; originally announced August 2023.

Comments: 5+1 pages, 3 figures

Journal ref: Phys. Rev. B 110, L121123 (2024)

Neural Representation-Based Method for Metal-induced Artifact Reduction in Dental CBCT Imaging

Authors: Hyoung Suk Park, Kiwan Jeon, Jin Keun Seo

Abstract: This study introduces a novel reconstruction method for dental cone-beam computed tomography (CBCT), focusing on effectively reducing metal-induced artifacts commonly encountered in the presence of prevalent metallic implants. Despite significant progress in metal artifact reduction techniques, challenges persist owing to the intricate physical interactions between polychromatic X-ray beams and me… ▽ More This study introduces a novel reconstruction method for dental cone-beam computed tomography (CBCT), focusing on effectively reducing metal-induced artifacts commonly encountered in the presence of prevalent metallic implants. Despite significant progress in metal artifact reduction techniques, challenges persist owing to the intricate physical interactions between polychromatic X-ray beams and metal objects, which are further compounded by the additional effects associated with metal-tooth interactions and factors specific to the dental CBCT data environment. To overcome these limitations, we propose an implicit neural network that generates two distinct and informative tomographic images. One image represents the monochromatic attenuation distribution at a specific energy level, whereas the other captures the nonlinear beam-hardening factor resulting from the polychromatic nature of X-ray beams. In contrast to existing CT reconstruction techniques, the proposed method relies exclusively on the Beer--Lambert law, effectively preventing the generation of metal-induced artifacts during the backprojection process commonly implemented in conventional methods. Extensive experimental evaluations demonstrate that the proposed method effectively reduces metal artifacts while providing high-quality image reconstructions, thus emphasizing the significance of the second image in capturing the nonlinear beam-hardening factor. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Comments: 10 pages, 5 figures

Automatic 3D Registration of Dental CBCT and Face Scan Data using 2D Projection Images

Authors: Hyoung Suk Park, Chang Min Hyun, Sang-Hwy Lee, Jin Keun Seo, Kiwan Jeon

Abstract: This paper presents a fully automatic registration method of dental cone-beam computed tomography (CBCT) and face scan data. It can be used for a digital platform of 3D jaw-teeth-face models in a variety of applications, including 3D digital treatment planning and orthognathic surgery. Difficulties in accurately merging facial scans and CBCT images are due to the different image acquisition method… ▽ More This paper presents a fully automatic registration method of dental cone-beam computed tomography (CBCT) and face scan data. It can be used for a digital platform of 3D jaw-teeth-face models in a variety of applications, including 3D digital treatment planning and orthognathic surgery. Difficulties in accurately merging facial scans and CBCT images are due to the different image acquisition methods and limited area of correspondence between the two facial surfaces. In addition, it is difficult to use machine learning techniques because they use face-related 3D medical data with radiation exposure, which are difficult to obtain for training. The proposed method addresses these problems by reusing an existing machine-learning-based 2D landmark detection algorithm in an open-source library and developing a novel mathematical algorithm that identifies paired 3D landmarks from knowledge of the corresponding 2D landmarks. A main contribution of this study is that the proposed method does not require annotated training data of facial landmarks because it uses a pre-trained facial landmark detection algorithm that is known to be robust and generalized to various 2D face image models. Note that this reduces a 3D landmark detection problem to a 2D problem of identifying the corresponding landmarks on two 2D projection images generated from two different projection angles. Here, the 3D landmarks for registration were selected from the sub-surfaces with the least geometric change under the CBCT and face scan environments. For the final fine-tuning of the registration, the Iterative Closest Point method was applied, which utilizes geometrical information around the 3D landmarks. The experimental results show that the proposed method achieved an averaged surface distance error of 0.74 mm for three pairs of CBCT and face scan datasets. △ Less

Submitted 26 July, 2023; v1 submitted 17 May, 2023; originally announced May 2023.

Comments: 8 pages, 6 figures, 2 tables

MSC Class: 92C55; 15A04; 62F10

Generating Texture for 3D Human Avatar from a Single Image using Sampling and Refinement Networks

Authors: Sihun Cha, Kwanggyoon Seo, Amirsaman Ashtari, Junyong Noh

Abstract: There has been significant progress in generating an animatable 3D human avatar from a single image. However, recovering texture for the 3D human avatar from a single image has been relatively less addressed. Because the generated 3D human avatar reveals the occluded texture of the given image as it moves, it is critical to synthesize the occluded texture pattern that is unseen from the source ima… ▽ More There has been significant progress in generating an animatable 3D human avatar from a single image. However, recovering texture for the 3D human avatar from a single image has been relatively less addressed. Because the generated 3D human avatar reveals the occluded texture of the given image as it moves, it is critical to synthesize the occluded texture pattern that is unseen from the source image. To generate a plausible texture map for 3D human avatars, the occluded texture pattern needs to be synthesized with respect to the visible texture from the given image. Moreover, the generated texture should align with the surface of the target 3D mesh. In this paper, we propose a texture synthesis method for a 3D human avatar that incorporates geometry information. The proposed method consists of two convolutional networks for the sampling and refining process. The sampler network fills in the occluded regions of the source image and aligns the texture with the surface of the target 3D mesh using the geometry information. The sampled texture is further refined and adjusted by the refiner network. To maintain the clear details in the given image, both sampled and refined texture is blended to produce the final texture map. To effectively guide the sampler network to achieve its goal, we designed a curriculum learning scheme that starts from a simple sampling task and gradually progresses to the task where the alignment needs to be considered. We conducted experiments to show that our method outperforms previous methods qualitatively and quantitatively. △ Less

Submitted 1 May, 2023; originally announced May 2023.

Nonlinear ill-posed problem in low-dose dental cone-beam computed tomography

Authors: Hyoung Suk Park, Chang Min Hyun, Jin Keun Seo

Abstract: This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard comput… ▽ More This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard computed tomography. Despite this severe ill-posedness, the demand for dental CBCT systems is rapidly growing because of their cost competitiveness and low radiation dose. We then describe the limitations of existing methods in the accurate restoration of the morphological structures of teeth using dental CBCT data severely damaged by metal implants. We further discuss the usefulness of panoramic images generated from CBCT data for accurate tooth segmentation. We also discuss the possibility of utilizing radiation-free intra-oral scan data as prior information in CBCT image reconstruction to compensate for the damage to data caused by metal implants. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Option pricing under the normal SABR model with Gaussian quadratures

Authors: Jaehyuk Choi, Byoung Ki Seo

Abstract: The stochastic-alpha-beta-rho (SABR) model has been widely adopted in options trading. In particular, the normal ($β=0$) SABR model is a popular model choice for interest rates because it allows negative asset values. The option price and delta under the SABR model are typically obtained via asymptotic implied volatility approximation, but these are often inaccurate and arbitrageable. Using a rece… ▽ More The stochastic-alpha-beta-rho (SABR) model has been widely adopted in options trading. In particular, the normal ($β=0$) SABR model is a popular model choice for interest rates because it allows negative asset values. The option price and delta under the SABR model are typically obtained via asymptotic implied volatility approximation, but these are often inaccurate and arbitrageable. Using a recently discovered price transition law, we propose a Gaussian quadrature integration scheme for price options under the normal SABR model. The compound Gaussian quadrature sum over only 49 points can calculate a very accurate price and delta that are arbitrage-free. △ Less

Submitted 7 January, 2023; originally announced January 2023.

Shape optimization of superconducting transmon qubit for low surface dielectric loss

Authors: Sungjun Eun, Seong Hyeon Park, Kyungsik Seo, Kibum Choi, Seungyong Hahn

Abstract: Surface dielectric loss of superconducting transmon qubit is believed as one of the dominant sources of decoherence. Reducing surface dielectric loss of superconducting qubit is known to be a great challenge for achieving high quality factor and a long relaxation time ($T_{1}$). Changing the geometry of capacitor pads and junction wire of transmon qubit makes it possible to engineer the surface di… ▽ More Surface dielectric loss of superconducting transmon qubit is believed as one of the dominant sources of decoherence. Reducing surface dielectric loss of superconducting qubit is known to be a great challenge for achieving high quality factor and a long relaxation time ($T_{1}$). Changing the geometry of capacitor pads and junction wire of transmon qubit makes it possible to engineer the surface dielectric loss. In this paper, we present the shape optimization approach for reducing Surface dielectric loss in transmon qubit. The capacitor pad and junction wire of the transmon qubit are shaped as spline curves and optimized through the combination of the finite-element method and global optimization algorithm. Then, we compared the surface participation ratio, which represents the portion of electric energy stored in each dielectric layer and proportional to two-level system (TLS) loss, of optimized structure and existing geometries to show the effectiveness of our approach. The result suggests that the participation ratio of capacitor pad, and junction wire can be reduced by 16% and 26% compared to previous designs through shape optimization, while overall footprint and anharmonicity maintain acceptable value. As a result, the TLS-limited quality factor and corresponding $T_{1}$ were increased by approximately 21.6%. △ Less

Submitted 25 November, 2022; originally announced November 2022.

Status and performance of the AMoRE-I experiment on neutrinoless double beta decay

Authors: H. B. Kim, D. H. Ha, E. J. Jeon, J. A. Jeon, H. S. Jo, C. S. Kang, W. G. Kang, H. S. Kim, S. C. Kim, S. G. Kim, S. K. Kim, S. R. Kim, W. T. Kim, Y. D. Kim, Y. H. Kim, D. H. Kwon, E. S. Lee, H. J. Lee, H. S. Lee, J. S. Lee, M. H. Lee, S. W. Lee, Y. C. Lee, D. S. Leonard, H. S. Lim , et al. (10 additional authors not shown)

Abstract: AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ cryst… ▽ More AMoRE is an international project to search for the neutrinoless double beta decay of $^{100}$Mo using a detection technology consisting of magnetic microcalorimeters (MMCs) and molybdenum-based scintillating crystals. Data collection has begun for the current AMORE-I phase of the project, an upgrade from the previous pilot phase. AMoRE-I employs thirteen $^\mathrm{48depl.}$Ca$^{100}$MoO$_4$ crystals and five Li$_2$$^{100}$MoO$_4$ crystals for a total crystal mass of 6.2 kg. Each detector module contains a scintillating crystal with two MMC channels for heat and light detection. We report the present status of the experiment and the performance of the detector modules. △ Less

Submitted 5 November, 2022; originally announced November 2022.

Comments: 8 pages, 4 figures, published in Journal of Low Temperature Physics (2022)

Radon concentration variations at the Yangyang underground laboratory

Authors: C. Ha, Y. Jeong, W. G. Kang, J. Kim, K. W. Kim, S. K. Kim, Y. D. Kim, H. S. Lee, M. H. Lee, M. J. Lee, Y. J. Lee, K. M. Seo

Abstract: The concentration of radon in the air has been measured in the 700 m-deep Yangyang underground laboratory between October 2004 and May 2022. The average concentrations in two experimental areas, called A6 and A5, were measured to be 53.4$\pm$0.2 Bq/m3 and 33.5$\pm$0.1 Bq/m3, respectively. The lower value in the A5 area reflects the presence of better temperature control and ventilation. The radon… ▽ More The concentration of radon in the air has been measured in the 700 m-deep Yangyang underground laboratory between October 2004 and May 2022. The average concentrations in two experimental areas, called A6 and A5, were measured to be 53.4$\pm$0.2 Bq/m3 and 33.5$\pm$0.1 Bq/m3, respectively. The lower value in the A5 area reflects the presence of better temperature control and ventilation. The radon concentrations sampled within the two A5 experimental rooms' air are found to be correlated to the local surface temperature outside of the rooms, with correlation coefficients r = 0.22 and r = 0.70. Therefore, the radon concentrations display a seasonal variation, because the local temperature driven by the overground season influences air ventilation in the experimental areas. A fit on the annual residual concentrations finds that the amplitude occurs each year on August, 31$\pm$6 days. △ Less

Submitted 21 September, 2022; v1 submitted 30 August, 2022; originally announced September 2022.

Comments: 8 pages, 7 figures

Metal Artifact Reduction with Intra-Oral Scan Data for 3D Low Dose Maxillofacial CBCT Modeling

Authors: Chang Min Hyun, Taigyntuya Bayaraa, Hye Sun Yun, Tae Jun Jang, Hyoung Suk Park, Jin Keun Seo

Abstract: Low-dose dental cone beam computed tomography (CBCT) has been increasingly used for maxillofacial modeling. However, the presence of metallic inserts, such as implants, crowns, and dental filling, causes severe streaking and shading artifacts in a CBCT image and loss of the morphological structures of the teeth, which consequently prevents accurate segmentation of bones. A two-stage metal artifact… ▽ More Low-dose dental cone beam computed tomography (CBCT) has been increasingly used for maxillofacial modeling. However, the presence of metallic inserts, such as implants, crowns, and dental filling, causes severe streaking and shading artifacts in a CBCT image and loss of the morphological structures of the teeth, which consequently prevents accurate segmentation of bones. A two-stage metal artifact reduction method is proposed for accurate 3D low-dose maxillofacial CBCT modeling, where a key idea is to utilize explicit tooth shape prior information from intra-oral scan data whose acquisition does not require any extra radiation exposure. In the first stage, an image-to-image deep learning network is employed to mitigate metal-related artifacts. To improve the learning ability, the proposed network is designed to take advantage of the intra-oral scan data as side-inputs and perform multi-task learning of auxiliary tooth segmentation. In the second stage, a 3D maxillofacial model is constructed by segmenting the bones from the dental CBCT image corrected in the first stage. For accurate bone segmentation, weighted thresholding is applied, wherein the weighting region is determined depending on the geometry of the intra-oral scan data. Because acquiring a paired training dataset of metal-artifact-free and metal artifact-affected dental CBCT images is challenging in clinical practice, an automatic method of generating a realistic dataset according to the CBCT physics model is introduced. Numerical simulations and clinical experiments show the feasibility of the proposed method, which takes advantage of tooth surface information from intra-oral scan data in 3D low dose maxillofacial CBCT modeling. △ Less

Submitted 7 February, 2022; originally announced February 2022.

Modeling bid and ask price dynamics with an extended Hawkes process and its empirical applications for high-frequency stock market data

Authors: Kyungsub Lee, Byoung Ki Seo

Abstract: This study proposes a versatile model for the dynamics of the best bid and ask prices using an extended Hawkes process. The model incorporates the zero intensities of the spread-narrowing processes at the minimum bid-ask spread, spread-dependent intensities, possible negative excitement, and nonnegative intensities. We apply the model to high-frequency best bid and ask price data from US stock mar… ▽ More This study proposes a versatile model for the dynamics of the best bid and ask prices using an extended Hawkes process. The model incorporates the zero intensities of the spread-narrowing processes at the minimum bid-ask spread, spread-dependent intensities, possible negative excitement, and nonnegative intensities. We apply the model to high-frequency best bid and ask price data from US stock markets. The empirical findings demonstrate a spread-narrowing tendency, excitations of the intensities caused by previous events, the impact of flash crashes, characteristic trends in fast trading over time, and the different features of market participants in the various exchanges. △ Less

Submitted 25 January, 2022; originally announced January 2022.

MSC Class: 60G55

Fully automatic integration of dental CBCT images and full-arch intraoral impressions with stitching error correction via individual tooth segmentation and identification

Authors: Tae Jun Jang, Hye Sun Yun, Chang Min Hyun, Jong-Eun Kim, Sang-Hwy Lee, Jin Keun Seo

Abstract: We present a fully automated method of integrating intraoral scan (IOS) and dental cone-beam computerized tomography (CBCT) images into one image by complementing each image's weaknesses. Dental CBCT alone may not be able to delineate precise details of the tooth surface due to limited image resolution and various CBCT artifacts, including metal-induced artifacts. IOS is very accurate for the scan… ▽ More We present a fully automated method of integrating intraoral scan (IOS) and dental cone-beam computerized tomography (CBCT) images into one image by complementing each image's weaknesses. Dental CBCT alone may not be able to delineate precise details of the tooth surface due to limited image resolution and various CBCT artifacts, including metal-induced artifacts. IOS is very accurate for the scanning of narrow areas, but it produces cumulative stitching errors during full-arch scanning. The proposed method is intended not only to compensate the low-quality of CBCT-derived tooth surfaces with IOS, but also to correct the cumulative stitching errors of IOS across the entire dental arch. Moreover, the integration provide both gingival structure of IOS and tooth roots of CBCT in one image. The proposed fully automated method consists of four parts; (i) individual tooth segmentation and identification module for IOS data (TSIM-IOS); (ii) individual tooth segmentation and identification module for CBCT data (TSIM-CBCT); (iii) global-to-local tooth registration between IOS and CBCT; and (iv) stitching error correction of full-arch IOS. The experimental results show that the proposed method achieved landmark and surface distance errors of 112.4 $μ$m and 301.7 $μ$m, respectively. △ Less

Submitted 2 March, 2023; v1 submitted 3 December, 2021; originally announced December 2021.

Chen's conjecture on biharmonic submanifolds in Riemannian manifolds

Authors: Keomkyo Seo, Gabjin Yun

Abstract: We study biharmonic hypersurfaces and biharmonic submanifolds in a Riemannian manifold. One of interesting problems in this direction is Chen's conjecture which says that any biharmonic submanifold in a Euclidean space is minimal. From the invariant equation for biharmonic submanifolds, we derive a fundamental identity involving the mean curvature vector field, and using this, we prove Chen's conj… ▽ More We study biharmonic hypersurfaces and biharmonic submanifolds in a Riemannian manifold. One of interesting problems in this direction is Chen's conjecture which says that any biharmonic submanifold in a Euclidean space is minimal. From the invariant equation for biharmonic submanifolds, we derive a fundamental identity involving the mean curvature vector field, and using this, we prove Chen's conjecture on biharmonic submanifolds in a Euclidean space. More generally, it is proved that any biharmonic submanifold in a space form of nonpositively sectional curvature is minimal. Furthermore we provide affirmative partial answers to the generalized Chen's conjecture and Balmuş-Montaldo-Oniciuc conjecture. △ Less

Submitted 5 October, 2021; v1 submitted 24 August, 2021; originally announced August 2021.

Comments: We withdraw this paper because we found there are some missing steps in proofs

MSC Class: 58E20; 53C42; 53C43

Alpha backgrounds in the AMoRE-Pilot experiment

Authors: V. Alenkov, H. W. Bae, J. Beyer, R. S. Boiko, K. Boonin, O. Buzanov, N. Chanthima, M. K. Cheoun, S. H. Choi, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. Gangapshev, L. Gastaldo, Yu. M. Gavriljuk, A. Gezhaev, V. D. Grigoryeva, V. Gurentsov, D. H. Ha, C. Ha, E. J. Ha, I. Hahn, E. J. Jeon , et al. (81 additional authors not shown)

Abstract: The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit… ▽ More The Advanced Mo-based Rare process Experiment (AMoRE)-Pilot experiment is an initial phase of the AMoRE search for neutrinoless double beta decay of $^{100}$Mo, with the purpose of investigating the level and sources of backgrounds. Searches for neutrinoless double beta decay generally require ultimately low backgrounds. Surface $α$ decays on the crystals themselves or nearby materials can deposit a continuum of energies that can be as high as the $Q$-value of the decay itself and may fall in the region of interest (ROI). To understand these background events, we studied backgrounds from radioactive contaminations internal to and on the surface of the crystals or nearby materials with Geant4-based Monte Carlo simulations. In this study, we report on the measured $α$ energy spectra fitted with the corresponding simulated spectra for six crystal detectors, where sources of background contributions could be identified through high energy $α$ peaks and continuum parts in the energy spectrum for both internal and surface contaminations. We determine the low-energy contributions from internal and surface $α$ contaminations by extrapolating from the $α$ background fitting model. △ Less

Submitted 5 December, 2022; v1 submitted 16 July, 2021; originally announced July 2021.

Free boundary constant mean curvature surfaces in a strictly convex three-manifold

Authors: Sung-Hong Min, Keomkyo Seo

Abstract: Let $C$ be a strictly convex domain in a $3$-dimensional Riemannian manifold with sectional curvature bounded above by a constant and let $Σ$ be a constant mean curvature surface with free boundary in $C$. We provide a pinching condition on the length of the traceless second fundamental form on $Σ$ which guarantees that the surface is homeomorphic to either a disk or an annulus. Furthermore, under… ▽ More Let $C$ be a strictly convex domain in a $3$-dimensional Riemannian manifold with sectional curvature bounded above by a constant and let $Σ$ be a constant mean curvature surface with free boundary in $C$. We provide a pinching condition on the length of the traceless second fundamental form on $Σ$ which guarantees that the surface is homeomorphic to either a disk or an annulus. Furthermore, under the same pinching condition, we prove that if $C$ is a geodesic ball of $3$-dimensional space forms, then $Σ$ is either a spherical cap or a Delaunay surface. △ Less

Submitted 27 July, 2021; v1 submitted 13 July, 2021; originally announced July 2021.

Comments: 23 pages

Fast and Accurate Single-Image Depth Estimation on Mobile Devices, Mobile AI 2021 Challenge: Report

Authors: Andrey Ignatov, Grigory Malivenko, David Plowman, Samarth Shukla, Radu Timofte, Ziyu Zhang, Yicheng Wang, Zilong Huang, Guozhong Luo, Gang Yu, Bin Fu, Yiran Wang, Xingyi Li, Min Shi, Ke Xian, Zhiguo Cao, Jin-Hua Du, Pei-Lin Wu, Chao Ge, Jiaoyang Yao, Fangwen Tu, Bo Li, Jung Eun Yoo, Kwanggyoon Seo, Jialei Xu , et al. (13 additional authors not shown)

Abstract: Depth estimation is an important computer vision problem with many practical applications to mobile devices. While many solutions have been proposed for this task, they are usually very computationally expensive and thus are not applicable for on-device inference. To address this problem, we introduce the first Mobile AI challenge, where the target is to develop an end-to-end deep learning-based d… ▽ More Depth estimation is an important computer vision problem with many practical applications to mobile devices. While many solutions have been proposed for this task, they are usually very computationally expensive and thus are not applicable for on-device inference. To address this problem, we introduce the first Mobile AI challenge, where the target is to develop an end-to-end deep learning-based depth estimation solutions that can demonstrate a nearly real-time performance on smartphones and IoT platforms. For this, the participants were provided with a new large-scale dataset containing RGB-depth image pairs obtained with a dedicated stereo ZED camera producing high-resolution depth maps for objects located at up to 50 meters. The runtime of all models was evaluated on the popular Raspberry Pi 4 platform with a mobile ARM-based Broadcom chipset. The proposed solutions can generate VGA resolution depth maps at up to 10 FPS on the Raspberry Pi 4 while achieving high fidelity results, and are compatible with any Android or Linux-based mobile devices. A detailed description of all models developed in the challenge is provided in this paper. △ Less

Submitted 17 May, 2021; originally announced May 2021.

Comments: Mobile AI 2021 Workshop and Challenges: https://ai-benchmark.com/workshops/mai/2021/. arXiv admin note: text overlap with arXiv:2105.07809

Analytic formula for option margin with liquidity costs under dynamic delta hedging

Authors: Kyungsub Lee, Byoung Ki Seo

Abstract: This study derives the expected liquidity cost when performing the delta hedging process of a European option. This cost is represented by an integration formula that includes European option prices and a certain function depending on the delta process. We first define a unit liquidity cost and then show that the liquidity cost is a multiplication of the unit liquidity cost, stock price, supply cu… ▽ More This study derives the expected liquidity cost when performing the delta hedging process of a European option. This cost is represented by an integration formula that includes European option prices and a certain function depending on the delta process. We first define a unit liquidity cost and then show that the liquidity cost is a multiplication of the unit liquidity cost, stock price, supply curve parameter, and the square of the number of options. Using this formula, the expected liquidity cost before hedging can be calculated much faster than when using a Monte Carlo simulation. Numerically computed distributions of liquidity costs in special cases are also provided. △ Less

Submitted 28 March, 2021; originally announced March 2021.

Non-Fermi liquid behavior in the Sachdev-Ye-Kitaev model for a one dimensional incoherent semimetal

Authors: Geo Jose, Kangjun Seo, Bruno Uchoa

Abstract: Abstract We study a two-band dispersive Sachdev-Ye-Kitaev (SYK) model in 1 + 1 dimension. We suggest a model that describes a semimetal with quadratic dispersion at half-filling. We compute the Green's function at the saddle point using a combination of analytical and numerical methods. Employing a scaling symmetry of the Schwinger-Dyson equations that becomes transparent in the strongly dispersiv… ▽ More Abstract We study a two-band dispersive Sachdev-Ye-Kitaev (SYK) model in 1 + 1 dimension. We suggest a model that describes a semimetal with quadratic dispersion at half-filling. We compute the Green's function at the saddle point using a combination of analytical and numerical methods. Employing a scaling symmetry of the Schwinger-Dyson equations that becomes transparent in the strongly dispersive limit, we show that the exact solution of the problem yields a distinct type of non-Fermi liquid with sublinear $ρ\propto T^{2/5}$ temperature dependence of the resistivity. A scaling analysis indicates that this state corresponds to the fixed point of the dispersive SYK model for a quadratic band touching semimetal. △ Less

Submitted 20 January, 2022; v1 submitted 22 March, 2021; originally announced March 2021.

Journal ref: Phys. Rev. Research 4, 013145 (2022)

A fully automated method for 3D individual tooth identification and segmentation in dental CBCT

Authors: Tae Jun Jang, Kang Cheol Kim, Hyun Cheol Cho, Jin Keun Seo

Abstract: Accurate and automatic segmentation of three-dimensional (3D) individual teeth from cone-beam computerized tomography (CBCT) images is a challenging problem because of the difficulty in separating an individual tooth from adjacent teeth and its surrounding alveolar bone. Thus, this paper proposes a fully automated method of identifying and segmenting 3D individual teeth from dental CBCT images. Th… ▽ More Accurate and automatic segmentation of three-dimensional (3D) individual teeth from cone-beam computerized tomography (CBCT) images is a challenging problem because of the difficulty in separating an individual tooth from adjacent teeth and its surrounding alveolar bone. Thus, this paper proposes a fully automated method of identifying and segmenting 3D individual teeth from dental CBCT images. The proposed method addresses the aforementioned difficulty by developing a deep learning-based hierarchical multi-step model. First, it automatically generates upper and lower jaws panoramic images to overcome the computational complexity caused by high-dimensional data and the curse of dimensionality associated with limited training dataset. The obtained 2D panoramic images are then used to identify 2D individual teeth and capture loose- and tight- regions of interest (ROIs) of 3D individual teeth. Finally, accurate 3D individual tooth segmentation is achieved using both loose and tight ROIs. Experimental results showed that the proposed method achieved an F1-score of 93.35% for tooth identification and a Dice similarity coefficient of 94.79% for individual 3D tooth segmentation. The results demonstrate that the proposed method provides an effective clinical and practical framework for digital dentistry. △ Less

Submitted 3 December, 2021; v1 submitted 11 February, 2021; originally announced February 2021.

Deep Retinex Network for Estimating Illumination Colors with Self-Supervised Learning

Authors: Kouki Seo, Yuma Kinoshita, Hitoshi Kiya

Abstract: We propose a novel Retinex image-decomposition network that can be trained in a self-supervised manner. The Retinex image-decomposition aims to decompose an image into illumination-invariant and illumination-variant components, referred to as "reflectance" and "shading," respectively. Although there are three consistencies that the reflectance and shading should satisfy, most conventional work con… ▽ More We propose a novel Retinex image-decomposition network that can be trained in a self-supervised manner. The Retinex image-decomposition aims to decompose an image into illumination-invariant and illumination-variant components, referred to as "reflectance" and "shading," respectively. Although there are three consistencies that the reflectance and shading should satisfy, most conventional work considers only one or two of the consistencies. For this reason, the three consistencies are considered in the proposed network. In addition, by using generated pseudo-images for training, the proposed network can be trained with self-supervised learning. Experimental results show that our network can decompose images into reflectance and shading components. Furthermore, it is shown that the proposed network can be used for white-balance adjustment. △ Less

Submitted 8 February, 2021; originally announced February 2021.

Comments: Accepted by LifeTech 2021

Dynamical prediction of two meteorological factors using the deep neural network and the long short term memory $(1)$

Authors: Ki Hong Shin, Jae Won Jung, Sung Kyu Seo, Cheol Hwan You, Dong In Lee, Jisun Lee, Ki Ho Chang, Woon Seon Jung, Kyungsik Kim

Abstract: It is important to calculate and analyze temperature and humidity prediction accuracies among quantitative meteorological forecasting. This study manipulates the extant neural network methods to foster the predictive accuracy. To achieve such tasks, we analyze and explore the predictive accuracy and performance in the neural networks using two combined meteorological factors (temperature and humid… ▽ More It is important to calculate and analyze temperature and humidity prediction accuracies among quantitative meteorological forecasting. This study manipulates the extant neural network methods to foster the predictive accuracy. To achieve such tasks, we analyze and explore the predictive accuracy and performance in the neural networks using two combined meteorological factors (temperature and humidity). Simulated studies are performed by applying the artificial neural network (ANN), deep neural network (DNN), extreme learning machine (ELM), long short-term memory (LSTM), and long short-term memory with peephole connections (LSTM-PC) machine learning methods, and the accurate prediction value are compared to that obtained from each other methods. Data are extracted from low frequency time-series of ten metropolitan cities of South Korea from March 2014 to February 2020 to validate our observations. To test the robustness of methods, the error of LSTM is found to outperform that of the other four methods in predictive accuracy. Particularly, as testing results, the temperature prediction of LSTM in summer in Tongyeong has a root mean squared error (RMSE) value of 0.866 lower than that of other neural network methods, while the mean absolute percentage error (MAPE) value of LSTM for humidity prediction is 5.525 in summer in Mokpo, significantly better than other metropolitan cities. △ Less

Submitted 16 January, 2021; originally announced January 2021.

Comments: 33 Pages, 9 figures

Brick partition problems in three dimensions

Authors: Ilkyoo Choi, Minseong Kim, Kiwon Seo

Abstract: A $d$-dimensional brick is a set $I_1\times \cdots \times I_d$ where each $I_i$ is an interval. Given a brick $B$, a brick partition of $B$ is a partition of $B$ into bricks. A brick partition $\mathcal{P}_d$ of a $d$-dimensional brick is $k$-piercing if every axis-parallel line intersects at least $k$ bricks in $\mathcal{P}_d$. Bucic et al. explicitly asked the minimum size $p(d, k)$ of a $k$-pie… ▽ More A $d$-dimensional brick is a set $I_1\times \cdots \times I_d$ where each $I_i$ is an interval. Given a brick $B$, a brick partition of $B$ is a partition of $B$ into bricks. A brick partition $\mathcal{P}_d$ of a $d$-dimensional brick is $k$-piercing if every axis-parallel line intersects at least $k$ bricks in $\mathcal{P}_d$. Bucic et al. explicitly asked the minimum size $p(d, k)$ of a $k$-piercing brick partition of a $d$-dimensional brick. The answer is known to be $4(k-1)$ when $d=2$. Our first result almost determines $p(3, k)$. Namely, we construct a $k$-piercing brick partition of a $3$-dimensional brick with $12k-15$ parts, which is off by only $1$ from the known lower bound. As a generalization of the above question, we also seek the minimum size $s(d, k)$ of a brick partition $\mathcal{P}_d$ of a $d$-dimensional brick where each axis-parallel plane intersects at least $k$ bricks in $\mathcal{P}_d$. We resolve the question in the $3$-dimensional case by determining $s(3, k)$ for all $k$. △ Less

Submitted 20 January, 2021; originally announced January 2021.

Comments: 8 pages, 3 figures

Automated 3D cephalometric landmark identification using computerized tomography

Authors: Hye Sun Yun, Chang Min Hyun, Seong Hyeon Baek, Sang-Hwy Lee, Jin Keun Seo

Abstract: Identification of 3D cephalometric landmarks that serve as proxy to the shape of human skull is the fundamental step in cephalometric analysis. Since manual landmarking from 3D computed tomography (CT) images is a cumbersome task even for the trained experts, automatic 3D landmark detection system is in a great need. Recently, automatic landmarking of 2D cephalograms using deep learning (DL) has a… ▽ More Identification of 3D cephalometric landmarks that serve as proxy to the shape of human skull is the fundamental step in cephalometric analysis. Since manual landmarking from 3D computed tomography (CT) images is a cumbersome task even for the trained experts, automatic 3D landmark detection system is in a great need. Recently, automatic landmarking of 2D cephalograms using deep learning (DL) has achieved great success, but 3D landmarking for more than 80 landmarks has not yet reached a satisfactory level, because of the factors hindering machine learning such as the high dimensionality of the input data and limited amount of training data due to ethical restrictions on the use of medical data. This paper presents a semi-supervised DL method for 3D landmarking that takes advantage of anonymized landmark dataset with paired CT data being removed. The proposed method first detects a small number of easy-to-find reference landmarks, then uses them to provide a rough estimation of the entire landmarks by utilizing the low dimensional representation learned by variational autoencoder (VAE). Anonymized landmark dataset is used for training the VAE. Finally, coarse-to-fine detection is applied to the small bounding box provided by rough estimation, using separate strategies suitable for mandible and cranium. For mandibular landmarks, patch-based 3D CNN is applied to the segmented image of the mandible (separated from the maxilla), in order to capture 3D morphological features of mandible associated with the landmarks. We detect 6 landmarks around the condyle all at once, instead of one by one, because they are closely related to each other. For cranial landmarks, we again use VAE-based latent representation for more accurate annotation. In our experiment, the proposed method achieved an averaged 3D point-to-point error of 2.91 mm for 90 landmarks only with 15 paired training data. △ Less

Submitted 16 December, 2020; originally announced January 2021.

Search for sterile neutrino oscillation using RENO and NEOS data

Authors: Z. Atif, J. H. Choi, B. Y. Han, C. H. Jang, H. I. Jang, J. S. Jang, E. J. Jeon, S. H. Jeon, K. K. Joo, K. Ju, D. E. Jung, H. J. Kim, H. S. Kim, J. G. Kim, J. H. Kim, B. R. Kim, J. Y. Kim, J. Y. Kim, S. B. Kim, S. Y. Kim, W. Kim, Y. D. Kim, Y. J. Ko, E. Kwon, D. H. Lee , et al. (22 additional authors not shown)

Abstract: We present a reactor model independent search for sterile neutrino oscillation using 2\,509\,days of RENO near detector data and 180 days of NEOS data. The reactor related systematic uncertainties are significantly suppressed as both detectors are located at the same reactor complex of Hanbit Nuclear Power Plant. The search is performed by electron antineutrino\,($\overlineν_e$) disappearance betw… ▽ More We present a reactor model independent search for sterile neutrino oscillation using 2\,509\,days of RENO near detector data and 180 days of NEOS data. The reactor related systematic uncertainties are significantly suppressed as both detectors are located at the same reactor complex of Hanbit Nuclear Power Plant. The search is performed by electron antineutrino\,($\overlineν_e$) disappearance between six reactors and two detectors with baselines of 294\,m\,(RENO) and 24\,m\,(NEOS). A spectral comparison of the NEOS prompt-energy spectrum with a no-oscillation prediction from the RENO measurement can explore reactor $\overlineν_e$ oscillations to sterile neutrino. Based on the comparison, we obtain a 95\% C.L. excluded region of $0.1<|Δm_{41}^2|<7$\,eV$^2$. We also obtain a 68\% C.L. allowed region with the best fit of $|Δm_{41}^2|=2.41\,\pm\,0.03\,$\,eV$^2$ and $\sin^2 2θ_{14}$=0.08$\,\pm\,$0.03 with a p-value of 8.2\%. Comparisons of obtained reactor antineutrino spectra at reactor sources are made among RENO, NEOS, and Daya Bay to find a possible spectral variation. △ Less

Submitted 6 September, 2022; v1 submitted 2 November, 2020; originally announced November 2020.

Comments: 6 pages, 5 figures: This manuscript has been significantly revised by the joint reanalysis by RENO and NEOS Collaborations. (In the previous edition, the RENO collaboration used publicly available NEOS data to evaluate the expected neutrino spectrum at NEOS.); auxiliary file for data release including error matrix (RENO_NEOS_data_release.txt)

Journal ref: Phys. Rev. D 105, L111101 (2022)

A two-stage approach for beam hardening artifact reduction in low-dose dental CBCT

Authors: T. Bayaraa, C. M. Hyun, T. J. Jang, S. M. Lee, J. K. Seo

Abstract: This paper presents a two-stage method for beam hardening artifact correction of dental cone beam computerized tomography (CBCT). The proposed artifact reduction method is designed to improve the quality of maxillofacial imaging, where soft tissue details are not required. Compared to standard CT, the additional difficulty of dental CBCT comes from the problems caused by offset detector, FOV trunc… ▽ More This paper presents a two-stage method for beam hardening artifact correction of dental cone beam computerized tomography (CBCT). The proposed artifact reduction method is designed to improve the quality of maxillofacial imaging, where soft tissue details are not required. Compared to standard CT, the additional difficulty of dental CBCT comes from the problems caused by offset detector, FOV truncation, and low signal-to-noise ratio due to low X-ray irradiation. To address these problems, the proposed method primarily performs a sinogram adjustment in the direction of enhancing data consistency, considering the situation according to the FOV truncation and offset detector. This sinogram correction algorithm significantly reduces beam hardening artifacts caused by high-density materials such as teeth, bones, and metal implants, while tending to amplify special types of noise. To suppress such noise, a deep convolutional neural network is complementarily used, where CT images adjusted by the sinogram correction are used as the input of the neural network. Numerous experiments validate that the proposed method successfully reduces beam hardening artifacts and, in particular, has the advantage of improving the image quality of teeth, associated with maxillofacial CBCT imaging. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Neural Crossbreed: Neural Based Image Metamorphosis

Authors: Sanghun Park, Kwanggyoon Seo, Junyong Noh

Abstract: We propose Neural Crossbreed, a feed-forward neural network that can learn a semantic change of input images in a latent space to create the morphing effect. Because the network learns a semantic change, a sequence of meaningful intermediate images can be generated without requiring the user to specify explicit correspondences. In addition, the semantic change learning makes it possible to perform… ▽ More We propose Neural Crossbreed, a feed-forward neural network that can learn a semantic change of input images in a latent space to create the morphing effect. Because the network learns a semantic change, a sequence of meaningful intermediate images can be generated without requiring the user to specify explicit correspondences. In addition, the semantic change learning makes it possible to perform the morphing between the images that contain objects with significantly different poses or camera views. Furthermore, just as in conventional morphing techniques, our morphing network can handle shape and appearance transitions separately by disentangling the content and the style transfer for rich usability. We prepare a training dataset for morphing using a pre-trained BigGAN, which generates an intermediate image by interpolating two latent vectors at an intended morphing value. This is the first attempt to address image morphing using a pre-trained generative model in order to learn semantic transformation. The experiments show that Neural Crossbreed produces high quality morphed images, overcoming various limitations associated with conventional approaches. In addition, Neural Crossbreed can be further extended for diverse applications such as multi-image morphing, appearance transfer, and video frame interpolation. △ Less

Submitted 2 September, 2020; originally announced September 2020.

Comments: 16 pages

Journal ref: ACM Transactions on Graphics (Proceeding of SIGGRAPH Asia), 2020

Radial symmetry and partially overdetermined problems in a convex cone

Authors: Jihye Lee, Keomkyo Seo

Abstract: We obtain the radial symmetry of the solution to a partially overdetermined boundary value problem in a convex cone in space forms by using the maximum principle for a suitable subharmonic function $P$ and integral identities. In dimension $2$, we prove Serrin-type results for partially overdetermined problems outside a convex cone. Furthermore, we obtain a Rellich identity for an eigenvalue probl… ▽ More We obtain the radial symmetry of the solution to a partially overdetermined boundary value problem in a convex cone in space forms by using the maximum principle for a suitable subharmonic function $P$ and integral identities. In dimension $2$, we prove Serrin-type results for partially overdetermined problems outside a convex cone. Furthermore, we obtain a Rellich identity for an eigenvalue problem with mixed boundary conditions in a cone. △ Less

Submitted 1 September, 2020; originally announced September 2020.

MSC Class: 35N25; 35R01; 53C24; 58C40

Hue-Correction Scheme Considering Non-Linear Camera Response for Multi-Exposure Image Fusion

Authors: Kouki Seo, Chihiro Go, Yuma Kinoshita, Hitoshi Kiya

Abstract: We propose a novel hue-correction scheme for multi-exposure image fusion (MEF). Various MEF methods have so far been studied to generate higher-quality images. However, there are few MEF methods considering hue distortion unlike other fields of image processing, due to a lack of a reference image that has correct hue. In the proposed scheme, we generate an HDR image as a reference for hue correcti… ▽ More We propose a novel hue-correction scheme for multi-exposure image fusion (MEF). Various MEF methods have so far been studied to generate higher-quality images. However, there are few MEF methods considering hue distortion unlike other fields of image processing, due to a lack of a reference image that has correct hue. In the proposed scheme, we generate an HDR image as a reference for hue correction, from input multi-exposure images. After that, hue distortion in images fused by an MEF method is removed by using hue information of the HDR one, on the basis of the constant-hue plane in the RGB color space. In simulations, the proposed scheme is demonstrated to be effective to correct hue-distortion caused by conventional MEF methods. Experimental results also show that the proposed scheme can generate high-quality images, regardless of exposure conditions of input multi-exposure images. △ Less

Submitted 18 July, 2020; originally announced July 2020.

Hue Correction Scheme for Multi-Exposure Image Fusion Considering Hue Distortion in Input Images

Authors: Kouki Seo, Chihiro Go, Yuma Kinoshita, Hitoshi Kiya

Abstract: We propose a novel hue-correction scheme for multi-exposure image fusion (MEF). Various MEF methods have so far been studied to generate higher-quality images. However, there are few MEF methods considering hue distortion unlike other fields of image processing, due to a lack of a reference image that has correct hue. In the proposed scheme, we generate an HDR image as a reference for hue correcti… ▽ More We propose a novel hue-correction scheme for multi-exposure image fusion (MEF). Various MEF methods have so far been studied to generate higher-quality images. However, there are few MEF methods considering hue distortion unlike other fields of image processing, due to a lack of a reference image that has correct hue. In the proposed scheme, we generate an HDR image as a reference for hue correction, from input multi-exposure images. After that, hue distortion in an image fused by an MEF method is removed by using hue information of the HDR one, on the basis of the constant-hue plane in the RGB color space. In simulations, the proposed scheme is demonstrated to be effective to correct hue-distortion caused by conventional MEF methods. Experimental results also show that the proposed scheme can generate high-quality images, regardless of exposure conditions of input multi-exposure images. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Comments: 2 pages, 4 figures, accepted by 2020 IEEE ICCE-TW