-
Low-Cost Raspberry Pi Star Sensor for Small Satellites
Authors:
Bharat Chandra P,
Mayuresh Sarpotdar,
Binukumar G. Nair,
Richa Rai,
Rekhesh Mohan,
Joice Mathew,
Margarita Safonova,
Jayant Murthy
Abstract:
We present here a low-cost Raspberry Pi (RPi)-based star sensor StarberrySense using commercial-off-the-shelf (COTS) components, developed and built for applications in small satellites and CubeSat-based missions. A star sensor is one of the essential instruments onboard a satellite for attitude determination. However, most commercially available star sensors are expensive and bulky to be used in…
▽ More
We present here a low-cost Raspberry Pi (RPi)-based star sensor StarberrySense using commercial-off-the-shelf (COTS) components, developed and built for applications in small satellites and CubeSat-based missions. A star sensor is one of the essential instruments onboard a satellite for attitude determination. However, most commercially available star sensors are expensive and bulky to be used in small satellite missions. StarberrySense is a configurable system -- it can operate as an imaging camera, a centroiding camera, or as a star sensor. We describe the algorithms implemented in the sensor, its assembly and calibration. This payload was selected by a recent Announcement of Opportunity call for payloads to fly on the PS4-Orbital Platform by the Indian Space Research Organization (ISRO).
△ Less
Submitted 13 July, 2022; v1 submitted 7 July, 2022;
originally announced July 2022.
-
The Near Ultraviolet Transient Surveyor (NUTS): An ultraviolet telescope to observe variable sources
Authors:
S. Ambily,
Mayuresh Sarpotdar,
Joice Mathew,
Binukumar G. Nair,
A. G. Sreejith,
Nirmal K.,
Jayant Murthy,
Margarita Safonova,
Rekhesh Mohan,
Vinod Kumar Aggarval,
S. Nagabhushanam,
Sachin Jeeragal
Abstract:
Observing the ultraviolet (UV) sky for time-variable phenomena is one of the many exciting science goals that can be achieved by a relatively small aperture telescope in space. The Near Ultraviolet Transient Surveyor (NUTS) is a wide-field ($3^\circ$) imager with a photon-counting detector in the near-UV (NUV, 200-300 nm), to be flown on an upcoming small satellite mission. It has a Ritchey-Chreti…
▽ More
Observing the ultraviolet (UV) sky for time-variable phenomena is one of the many exciting science goals that can be achieved by a relatively small aperture telescope in space. The Near Ultraviolet Transient Surveyor (NUTS) is a wide-field ($3^\circ$) imager with a photon-counting detector in the near-UV (NUV, 200-300 nm), to be flown on an upcoming small satellite mission. It has a Ritchey-Chretien (RC) telescope design with correction optics to enable wide-field observations while minimizing optical aberrations. We have used an intensified CMOS detector with a solar blind photocathode, to be operated in photon-counting mode. The main science goal of the instrument is the observation of transient sources in the UV, including flare stars, supernovae, and active galactic nuclei. NUTS's aperture size and effective area enable observation of relatively unexplored, brighter parts of the UV sky which are usually not accessible to larger missions. We have designed, fabricated, and assembled the instrument, and the final calibrations and environmental tests are being carried out. In this paper, we provide the scientific motivation and technical overview of the instrument and describe the assembly and calibration steps.
△ Less
Submitted 7 January, 2022;
originally announced January 2022.
-
Prospect for UV observations from the Moon. III. Assembly and ground calibration of Lunar Ultraviolet Cosmic Imager (LUCI)
Authors:
Joice Mathew,
B. G. Nair,
Margarita Safonova,
S. Sriram,
Ajin Prakash,
Mayuresh Sarpotdar,
S. Ambily,
Nirmal K.,
A. G. Sreejith,
Jayant Murthy,
P. U. Kamath,
S. Kathiravan,
B. R. Prasad,
Noah Brosch,
Norbert Kappelmann,
Nirmal Suraj Gadde,
Rahul Narayan
Abstract:
The Lunar Ultraviolet Cosmic Imager (LUCI) is a near-ultraviolet (NUV) telescope with all-spherical mirrors, designed and built to fly as a scientific payload on a lunar mission with Team Indus - the original Indian entry to the Google Lunar X-Prize. Observations from the Moon provide a unique opportunity of a stable platform with an unobstructed view of the space at all wavelengths due to the abs…
▽ More
The Lunar Ultraviolet Cosmic Imager (LUCI) is a near-ultraviolet (NUV) telescope with all-spherical mirrors, designed and built to fly as a scientific payload on a lunar mission with Team Indus - the original Indian entry to the Google Lunar X-Prize. Observations from the Moon provide a unique opportunity of a stable platform with an unobstructed view of the space at all wavelengths due to the absence of atmosphere and ionosphere. LUCI is an 80 mm aperture telescope, with a field of view of 27.6'x 20.4' and a spatial resolution of 5'', will scan the sky in the NUV (200-320 nm) domain to look for transient sources. We describe here the assembly, alignment, and calibration of the complete instrument. LUCI is now in storage in a class 1000 clean room and will be delivered to our flight partner in readiness for flight.
△ Less
Submitted 1 April, 2019; v1 submitted 18 March, 2019;
originally announced March 2019.
-
Design and modeling of a tunable spatial heterodyne spectrometer for emission line studies
Authors:
Nirmal Kaipachery,
Sridharan Rengaswamy,
Sripadmanaban Sriram,
Jayant Murthy,
Suresh Ambily,
Margarita Safonova,
Aickara Gopinathan Sreejith,
Joice Mathew,
Mayuresh Sarpotdar
Abstract:
Spatial Heterodyne Spectroscopy (SHS) is a relatively novel interferometric technique similar to the Fourier transform spectroscopy with heritage from the Michelson Interferometer. An imaging detector is used at the output of a SHS to record the spatially-heterodyned interference pattern. The spectrum of the source is obtained by Fourier transforming the recorded interferogram. The merits of the S…
▽ More
Spatial Heterodyne Spectroscopy (SHS) is a relatively novel interferometric technique similar to the Fourier transform spectroscopy with heritage from the Michelson Interferometer. An imaging detector is used at the output of a SHS to record the spatially-heterodyned interference pattern. The spectrum of the source is obtained by Fourier transforming the recorded interferogram. The merits of the SHS -- its design, including the absence of moving parts, compactness, high throughput, high SNR and instantaneous spectral measurements -- make it suitable for space as well as for ground observatories. The small bandwidth limitation of the SHS can be overcome by building it in tunable configuration (Tunable Spatial Heterodyne Spectrometer, TSHS). In this paper, we describe the design, development and simulation of a TSHS in refractive configuration suitable for optical wavelength regime. Here we use a beam splitter to split the incoming light compared with all--reflective SHS where a reflective grating does the beam splitting. Hence the alignment of this instrument is simple compared with all--reflective SHS where a fold mirror and a roof mirror are used to combine the beam. This instrument is intended to study faint diffuse extended celestial objects with a resolving power above 20000, and can cover a wavelength range from 350 nm to 700 nm by tuning. It is compact and rugged compared with other instruments having similar configurations.
△ Less
Submitted 26 April, 2018; v1 submitted 25 April, 2018;
originally announced April 2018.
-
Wide-field Ultraviolet Imager for Astronomical Transient Studies
Authors:
Joice Mathew,
S. Ambily,
Ajin Prakash,
Mayuresh Sarpotdar,
K. Nirmal,
A. G. Sreejith,
Margarita Safonova,
Jayant Murthy,
Noah Brosch
Abstract:
Though the ultraviolet (UV) domain plays a vital role in the studies of astronomical transient events, the UV time-domain sky remains largely unexplored. We have designed a wide-field UV imager that can be flown on a range of available platforms, such as high-altitude balloons, CubeSats, and larger space missions. The major scientific goals are the variability of astronomical sources, detection of…
▽ More
Though the ultraviolet (UV) domain plays a vital role in the studies of astronomical transient events, the UV time-domain sky remains largely unexplored. We have designed a wide-field UV imager that can be flown on a range of available platforms, such as high-altitude balloons, CubeSats, and larger space missions. The major scientific goals are the variability of astronomical sources, detection of transients such as supernovae, novae, tidal disruption events, and characterizing AGN variability. The instrument has an 80 mm aperture with a circular field of view of 10.8 degrees, an angular resolution of around 22 arcsec, and a 240-390 nm spectral observation window. The detector for the instrument is a Microchannel Plate (MCP)-based image intensifier with both photon counting and integration capabilities. An FPGA-based detector readout mechanism and real-time data processing have been implemented. The imager is designed in such a way that its lightweight and compact nature are well fitted for the CubeSat dimensions. Here we present various design and developmental aspects of this UV wide-field transient explorer.
△ Less
Submitted 31 January, 2018;
originally announced January 2018.
-
Near UV Imager with an MCP Based Photon Counting Detector
Authors:
S. Ambily,
Joice Mathew,
Mayuresh Sarpotdar,
A. G. Sreejith,
K. Nirmal,
Ajin Prakash,
Margarita Safonova,
Jayant Murthy
Abstract:
We are developing a compact UV Imager using light weight components, that can be flown on a small CubeSat or a balloon platform. The system has a lens-based optics that can provide an aberration-free image over a wide field of view. The backend instrument is a photon counting detector with off-the-shelf MCP, CMOS sensor and electronics. We are using a Z-stack MCP with a compact high voltage power…
▽ More
We are developing a compact UV Imager using light weight components, that can be flown on a small CubeSat or a balloon platform. The system has a lens-based optics that can provide an aberration-free image over a wide field of view. The backend instrument is a photon counting detector with off-the-shelf MCP, CMOS sensor and electronics. We are using a Z-stack MCP with a compact high voltage power supply and a phosphor screen anode, which is read out by a CMOS sensor and the associated electronics. The instrument can be used to observe solar system objects and detect bright transients from the upper atmosphere with the help of CubeSats or high altitude balloons. We have designed the imager to be capable of working in direct frame transfer mode as well in the photon-counting mode for single photon event detection. The identification and centroiding of each photon event are done using an FPGA-based data acquisition and real-time processing system.
△ Less
Submitted 3 March, 2017;
originally announced March 2017.
-
Development of Data Acquisition Methods for an FPGA-Based Photon Counting Detector
Authors:
S. Ambily,
Mayuresh Sarpotdar,
Joice Mathew,
A. G. Sreejith,
K. Nirmal,
Ajin Prakash,
Margarita Safonova,
Jayant Murthy
Abstract:
MCP-based detectors are widely used in the ultraviolet (UV) region due to their low noise levels, high sensitivity and good spatial and temporal resolution. We have developed a compact near-UV (NUV) detector for high-altitude balloon and space flights, using off-the-shelf MCP, CMOS sensor, and optics. The detector is designed to be capable of working in the direct frame transfer mode as well in th…
▽ More
MCP-based detectors are widely used in the ultraviolet (UV) region due to their low noise levels, high sensitivity and good spatial and temporal resolution. We have developed a compact near-UV (NUV) detector for high-altitude balloon and space flights, using off-the-shelf MCP, CMOS sensor, and optics. The detector is designed to be capable of working in the direct frame transfer mode as well in the photon-counting mode for single photon event detection. The identification and centroiding of each photon event are done using an FPGA-based data acquisition and real-time processing system. In this paper, we discuss various algorithms and methods used in both operating modes, as well as their implementation on the hardware.
△ Less
Submitted 24 January, 2017;
originally announced January 2017.
-
Prospect for UV observations from the Moon. II. Instrumental Design of an Ultraviolet Imager LUCI
Authors:
Joice Mathew,
Ajin Prakash,
Mayuresh Sarpotdar,
A. G. Sreejith,
K. Nirmal,
S. Ambily,
Margarita Safonova,
Jayant Murthy,
Noah Brosch
Abstract:
We present a design for a near-ultraviolet (NUV) imaging instrument which may be flown on a range of available platforms, including high-altitude balloons, nanosatellites, or space missions. Although all current UV space missions adopt a Ritchey-Chretain telescope design, this requires aspheric optics, making the optical system complex, expensive and challenging for manufacturing and alignment. An…
▽ More
We present a design for a near-ultraviolet (NUV) imaging instrument which may be flown on a range of available platforms, including high-altitude balloons, nanosatellites, or space missions. Although all current UV space missions adopt a Ritchey-Chretain telescope design, this requires aspheric optics, making the optical system complex, expensive and challenging for manufacturing and alignment. An all-spherical configuration is a cost-effective and simple solution. We have aimed for a small payload which may be launched by different platforms and we have designed a compact, light-weight payload which will withstand all launch loads. No other UV payloads have been previously reported with an all-spherical optical design for imaging in the NUV domain and a weight below 2 kg. Our main science goal is focussed on bright UV sources not accessible by the more sensitive large space UV missions.
Here we discuss various aspects of design and development of the complete instrument, the structural and finite-element analysis of the system performed to ensure that the payload withstands launch-load stresses and vibrations. We expect to fly this telescope -- Lunar Ultraviolet Cosmic Imager (LUCI) -- on a spacecraft to the Moon as part of the Indian entry into Google X-Prize competition. Observations from the Moon provide a unique opportunity to observe the sky from a stable platform far above the Earth's atmosphere. However, we will explore other opportunities as well, and will fly this telescope on a high-altitude balloon later this year.
△ Less
Submitted 5 January, 2017; v1 submitted 7 October, 2016;
originally announced October 2016.
-
Pointing System for the Balloon-Borne Astronomical Payloads
Authors:
K. Nirmal,
A. G. Sreejith,
Joice Mathew,
Mayuresh Sarpotdar,
Ambily Suresh,
Ajin Prakash,
Margarita Safonova,
Jayant Murthy
Abstract:
We describe the development and implementation of a light-weight, fully autonomous 2-axis pointing and stabilization system designed for balloon-borne astronomical payloads. The system is developed using off-the-shelf components such as Arduino Uno controller, HMC 5883L magnetometer, MPU-9150 Inertial Measurement Unit (IMU) and iWave GPS receiver unit. It is a compact and rugged system which can a…
▽ More
We describe the development and implementation of a light-weight, fully autonomous 2-axis pointing and stabilization system designed for balloon-borne astronomical payloads. The system is developed using off-the-shelf components such as Arduino Uno controller, HMC 5883L magnetometer, MPU-9150 Inertial Measurement Unit (IMU) and iWave GPS receiver unit. It is a compact and rugged system which can also be used to take images/video in a moving vehicle, or in areal photography. The system performance is evaluated from the ground, as well as in conditions simulated to imitate the actual flight by using a tethered launch.
△ Less
Submitted 16 December, 2016; v1 submitted 1 September, 2016;
originally announced September 2016.
-
A software package for evaluating the performance of a star sensor operation
Authors:
Mayuresh Sarpotdar,
Joice Mathew,
A. G. Sreejith,
K. Nirmal,
S. Ambily,
Ajin Prakash,
Margarita Safonova,
Jayant Murthy
Abstract:
We have developed a low-cost off-the-shelf component star sensor (StarSense) for use in minisatellites and CubeSats to determine the attitude of a satellite in orbit. StarSense is an imaging camera with a limiting magnitude of 6.5, which extracts information from star patterns it records in the images. The star sensor implements a centroiding algorithm to find centroids of the stars in the image,…
▽ More
We have developed a low-cost off-the-shelf component star sensor (StarSense) for use in minisatellites and CubeSats to determine the attitude of a satellite in orbit. StarSense is an imaging camera with a limiting magnitude of 6.5, which extracts information from star patterns it records in the images. The star sensor implements a centroiding algorithm to find centroids of the stars in the image, a Geometric Voting algorithm for star pattern identification, and a QUEST algorithm for attitude quaternion calculation. Here, we describe the software package to evaluate the performance of these algorithms as a star sensor single operating system. We simulate the ideal case where sky background and instrument errors are omitted, and a more realistic case where noise and camera parameters are added to the simulated images. We evaluate such performance parameters of the algorithms as attitude accuracy, calculation time, required memory, star catalog size, sky coverage, etc., and estimate the errors introduced by each algorithm. This software package is written for use in MATLAB. The testing is parametrized for different hardware parameters, such as the focal length of the imaging setup, the field of view (FOV) of the camera, angle measurement accuracy, distortion effects, etc., and therefore, can be applied to evaluate the performance of such algorithms in any star sensor. For its hardware implementation on our StarSense, we are currently porting the codes in form of functions written in C. This is done keeping in view its easy implementation on any star sensor electronics hardware.
△ Less
Submitted 27 December, 2016; v1 submitted 27 August, 2016;
originally announced August 2016.
-
A generic FPGA-based detector readout and real-time image processing board
Authors:
Mayuresh Sarpotdar,
Joice Mathew,
Margarita Safonova,
Jayant Murthy
Abstract:
For space-based astronomical observations, it is important to have a mechanism to capture the digital output from the standard detector for further on-board analysis and storage. We have developed a generic (application- wise) field-programmable gate array (FPGA) board to interface with an image sensor, a method to generate the clocks required to read the image data from the sensor, and a real-tim…
▽ More
For space-based astronomical observations, it is important to have a mechanism to capture the digital output from the standard detector for further on-board analysis and storage. We have developed a generic (application- wise) field-programmable gate array (FPGA) board to interface with an image sensor, a method to generate the clocks required to read the image data from the sensor, and a real-time image processor system (on-chip) which can be used for various image processing tasks. The FPGA board is applied as the image processor board in the Lunar Ultraviolet Cosmic Imager (LUCI) and a star sensor (StarSense) (instruments developed by our group). In this paper, we discuss the various design considerations for this board and its applications in the future balloon and possible space flights.
△ Less
Submitted 26 August, 2016;
originally announced August 2016.
-
Noise modeling and analysis of an IMU-based attitude sensor: improvement of performance by filtering and sensor fusion
Authors:
K. Nirmal,
A. G. Sreejith,
Joice Mathew,
Mayuresh Sarpotdar,
Ambily Suresh,
Ajin Prakash,
Margarita Safonova,
Jayant Murthy
Abstract:
We describe the characterization and removal of noise present in the Inertial Measurement Unit (IMU) MPU-6050. This IMU was initially used in an attitude sensor (AS) developed in-house, and subsequently implemented in a pointing and stabilization platform developed for small balloon-borne astronomical payloads. We found that the performance of the IMU degrades with time due to the accumulation of…
▽ More
We describe the characterization and removal of noise present in the Inertial Measurement Unit (IMU) MPU-6050. This IMU was initially used in an attitude sensor (AS) developed in-house, and subsequently implemented in a pointing and stabilization platform developed for small balloon-borne astronomical payloads. We found that the performance of the IMU degrades with time due to the accumulation of different errors. Using the Allan variance analysis method, we identified the different components of noise present in the IMU and verified the results using a power spectral density analysis (PSD). We tried to remove the high-frequency noise using smoothing filters, such as moving average filter and Savitzky-Golay filter. Although we did manage to filter some of the high-frequency noise, the performance of these filters was not satisfactory for our application. We found the distribution of the random noise present in the IMU using a probability density analysis, and identified the noise to be white Gaussian in nature which we successfully removed by a Kalman filter in real time.
△ Less
Submitted 25 August, 2016;
originally announced August 2016.
-
An Ultraviolet imager to study bright UV sources
Authors:
Joice Mathew,
Ajin Prakash,
Mayuresh Sarpotdar,
A. G. Sreejith,
Margarita Safonova,
Jayant Murthy
Abstract:
We have designed and developed a compact ultraviolet imaging payload to fly on a range of possible platforms such as high altitude balloon experiments, cubesats, space missions, etc. The primary science goals are to study the bright UV sources (mag < 10) and also to look for transients in the Near UV (200 - 300 nm) domain. Our first choice is to place this instrument on a spacecraft going to the M…
▽ More
We have designed and developed a compact ultraviolet imaging payload to fly on a range of possible platforms such as high altitude balloon experiments, cubesats, space missions, etc. The primary science goals are to study the bright UV sources (mag < 10) and also to look for transients in the Near UV (200 - 300 nm) domain. Our first choice is to place this instrument on a spacecraft going to the Moon as part of the Indian entry into Google lunar X-Prize competition. The major constraints for the instrument are, it should be lightweight (< 2Kg), compact (length < 50cm) and cost effective. The instrument is an 80 mm diameter Cassegrain telescope with a field of view of around half a degree designated for UV imaging. In this paper we will discuss about the various science cases that can be performed by having observations with the instrument on different platforms. We will also describe the design, development and the current state of implementation of the instrument. This includes opto-mechanical and electrical design of the instrument. We have adopted an all spherical optical design which would make the system less complex to realize and a cost effective solution compared to other telescope configuration. The structural design has been chosen in such a way that it will ensure that the instrument could withstand all the launch load vibrations. An FPGA based electronics board is used for the data acquisition, processing and CCD control. We will also briefly discuss about the hardware implementation of the detector interface and algorithms for the detector readout and data processing.
△ Less
Submitted 23 August, 2016;
originally announced August 2016.
-
Balloon UV Experiments for Astronomical and Atmospheric Observations
Authors:
A. G. Sreejith,
Joice Mathew,
Mayuresh Sarpotdar,
K. Nirmal,
S. Ambily,
Ajin Prakash,
Margarita Safonova,
Jayant Murthy
Abstract:
The ultraviolet (UV) window has been largely unexplored through balloons for astronomy. We discuss here the development of a compact near-UV spectrograph with fiber optics input for balloon ights. It is a modified Czerny-Turner system built using off-the-shelf components. The system is portable and scalable to different telescopes. The use of re ecting optics reduces the transmission loss in the U…
▽ More
The ultraviolet (UV) window has been largely unexplored through balloons for astronomy. We discuss here the development of a compact near-UV spectrograph with fiber optics input for balloon ights. It is a modified Czerny-Turner system built using off-the-shelf components. The system is portable and scalable to different telescopes. The use of re ecting optics reduces the transmission loss in the UV. It employs an image-intensified CMOS sensor, operating in photon counting mode, as the detector of choice. A lightweight pointing system developed for stable pointing to observe astronomical sources is also discussed, together with the methods to improve its accuracy, e.g. using the in-house build star sensor and others. Our primary scientific objectives include the observation of bright Solar System objects such as visible to eye comets, Moon and planets. Studies of planets can give us valuable information about the planetary aurorae, helping to model and compare atmospheres of other planets and the Earth. The other major objective is to look at the diffuse UV atmospheric emission features (airglow lines), and at column densities of trace gases. This UV window includes several lines important to atmospheric chemistry, e.g. SO2, O3, HCHO, BrO. The spectrograph enables simultaneous measurement of various trace gases, as well as provides better accuracy at higher altitudes compared to electromechanical trace gas measurement sondes. These lines contaminate most astronomical observations but are poorly characterized. Other objectives may include sprites in the atmosphere and meteor ashes from high altitude burn-outs. Our recent experiments and observations with high-altitude balloons are discussed.
△ Less
Submitted 23 August, 2016;
originally announced August 2016.
-
Measurements of gondola motion on a stratospheric balloon flight
Authors:
Margarita Safonova,
K. Nirmal,
A. G. Sreejith,
Mayuresh Sarpotdar,
S. Ambily,
Ajin Prakash,
Joice Mathew,
Jayant Murthy,
Devarajan Anand,
B. V. N. Kapardhi,
B. Suneel Kumar,
P. M. Kulkarni
Abstract:
Balloon experiments are an economically feasible method of conducting observations in astronomy that are not possible from the ground. The astronomical payload may include a telescope, a detector, and a pointing/stabilization system. Determining the attitude of the payload is of primary importance in such applications, to accurately point the detector/telescope to the desired direction. This is es…
▽ More
Balloon experiments are an economically feasible method of conducting observations in astronomy that are not possible from the ground. The astronomical payload may include a telescope, a detector, and a pointing/stabilization system. Determining the attitude of the payload is of primary importance in such applications, to accurately point the detector/telescope to the desired direction. This is especially important in generally unstable lightweight balloon flights. However, the conditions at float altitudes, which can be reached by zero pressure balloons, could be more stable, enabling accurate pointings. We have used the Inertial Measurement Unit (IMU), placed on a stratospheric zero pressure balloon, to observe 3-axis motion of a balloon payload over a fight time of 4.5 hours, from launch to the float altitude of 31.2 km. The balloon was launched under nominal atmospheric conditions on May 8th 2016, from a Tata Institute of Fundamental Research Balloon Facility, Hyderabad.
△ Less
Submitted 21 July, 2016;
originally announced July 2016.
-
An Overview of High-Altitude Balloon Experiments at the Indian Institute of Astrophysics
Authors:
Margarita Safonova,
Akshata Nayak,
A. G. Sreejith,
Joice Mathew,
Mayuresh Sarpotdar,
S. Ambily,
K. Nirmal,
Sameer Talnikar,
Shripathy Hadigal,
Ajin Prakash,
Jayant Murthy
Abstract:
We have initiated the High-Altitude Ballooning programme at Indian Institute of Astrophysics, Bangalore, in the year 2011 with the primary purpose of developing and flying low-cost scientific payloads on a balloon-borne platform. The main aim is the observations of extended nearby objects (e.g. comets) and of diffuse sources (e.g. zodiacal light or airglow) with wide field of view (FOV) UV instrum…
▽ More
We have initiated the High-Altitude Ballooning programme at Indian Institute of Astrophysics, Bangalore, in the year 2011 with the primary purpose of developing and flying low-cost scientific payloads on a balloon-borne platform. The main aim is the observations of extended nearby objects (e.g. comets) and of diffuse sources (e.g. zodiacal light or airglow) with wide field of view (FOV) UV instruments from near space (20 to 30 km). A brief summary and the results of the tethered flights carried out at IIA CREST campus are given in Ref.~1. Here we present an overview of the nine free-flying balloon experiments conducted from March 2013 to November 2014. We describe the launch procedures, payloads, methods of tracking and recovery. Since we fall in the light balloon category --- payload weight is limited to less than 6 kg --- we use the 3-D printer to fabricate lightweight boxes and structures for our experiments. We discuss the flight and scientific data obtained from different launches and the development of the in-house lightweight sensors and controllers, as well as a fully-fledged 2-axis pointing and stabilization system, for the flights.
△ Less
Submitted 3 September, 2015; v1 submitted 4 June, 2015;
originally announced June 2015.
-
A Raspberry Pi-Based Attitude Sensor
Authors:
A. G. Sreejith,
Joice Mathew,
Mayuresh Sarpotdar,
Rekhesh Mohan,
Akshata Nayak,
Margarita Safonova,
Jayant Murthy
Abstract:
We have developed a lightweight low-cost attitude sensor, based on a Raspberry Pi, built with readily available commercial components. It can be used in experiments where weight and power are constrained, such as in high- altitude lightweight balloon flights. This attitude sensor will be used as a major building block in a closed-loop control system with driver motors to stabilize and point camera…
▽ More
We have developed a lightweight low-cost attitude sensor, based on a Raspberry Pi, built with readily available commercial components. It can be used in experiments where weight and power are constrained, such as in high- altitude lightweight balloon flights. This attitude sensor will be used as a major building block in a closed-loop control system with driver motors to stabilize and point cameras and telescopes for astronomical observations from a balloon-borne payload.
△ Less
Submitted 19 December, 2014;
originally announced December 2014.