-
Representation-Optimal Multi-Robot Motion Planning using Conflict-Based Search
Authors:
Irving Solis,
Read Sandström,
James Motes,
Nancy M. Amato
Abstract:
Multi-Agent Motion Planning (MAMP) is the problem of computing feasible paths for a set of agents given individual start and goal states. Given the hardness of MAMP, most of the research related to multi-agent systems has focused on multi-agent pathfinding (MAPF), which simplifies the problem by assuming a shared discrete representation of the space for all agents. The Conflict-Based Search algori…
▽ More
Multi-Agent Motion Planning (MAMP) is the problem of computing feasible paths for a set of agents given individual start and goal states. Given the hardness of MAMP, most of the research related to multi-agent systems has focused on multi-agent pathfinding (MAPF), which simplifies the problem by assuming a shared discrete representation of the space for all agents. The Conflict-Based Search algorithm (CBS) has proven a tractable means of generating optimal solutions in discrete spaces. However, neither CBS nor other discrete MAPF techniques can be directly applied to solve MAMP problems because of the assumption of the shared discrete representation of the agents' state space. In this work, we solve MAMP problems by adapting the techniques discovered in the MAPF scenario by CBS to the more general problem with heterogeneous agents in a continuous space. We demonstrate the scalability teams of up to 32 agents, demonstrate the ability to handle up to 8 high DOF manipulators, and plan for heterogeneous teams. In all scenarios, our approach plans significantly faster while providing higher quality solutions.
△ Less
Submitted 3 March, 2020; v1 submitted 29 September, 2019;
originally announced September 2019.
-
Single crystal diamond membranes for nanoelectronics
Authors:
K. Bray,
H. Kato,
R. Previdi,
R. Sandstrom,
K. Ganesan,
M. Ogura,
T. Makino,
S. Yamasaki,
A. P. Magyar,
M. Toth,
I. Aharonovich
Abstract:
Single crystal, nanoscale diamond membranes are highly sought after for a variety of applications including nanophotonics, nanoelectronics and quantum information science. However, so far, the availability of conductive diamond membranes remained an unreachable goal. In this work we present a complete nanofabrication methodology for engineering high aspect ratio, electrically active single crystal…
▽ More
Single crystal, nanoscale diamond membranes are highly sought after for a variety of applications including nanophotonics, nanoelectronics and quantum information science. However, so far, the availability of conductive diamond membranes remained an unreachable goal. In this work we present a complete nanofabrication methodology for engineering high aspect ratio, electrically active single crystal diamond membranes. The membranes have large lateral directions, exceeding 500x500 um2 and are only several hundreds of nanometers thick. We further realize vertical single crystal p-n junctions, made from the diamond membranes that exhibit onset voltages of ~ 10V and a current of several mA. Moreover, we deterministically introduce optically active color centers into the membranes, and demonstrate for the first time a single crystal nanoscale diamond LED. The robust and scalable approach to engineer the electrically active single crystal diamond membranes, offers new pathways for advanced nanophotonics, nanoelectronics and optomechanics devices employing diamond.
△ Less
Submitted 17 October, 2017;
originally announced November 2017.
-
Impurity effects on the grain boundary cohesion in copper
Authors:
Yunguo Li,
Pavel Korzhavyi,
Rolf Sandström,
Christina Lilja
Abstract:
Segregated impurities at grain boundaries can dramatically change the mechanical behavior of metals, while the mechanism is still obscure in some cases. Here, we suggest an unified approach to investigate segregation and its effects on the mechanical properties of polycrystalline alloys using the example of 3$sp$ impurities (Mg, Al, Si, P, or S) at a special type $Σ5(310)[001]$ tilt grain boundary…
▽ More
Segregated impurities at grain boundaries can dramatically change the mechanical behavior of metals, while the mechanism is still obscure in some cases. Here, we suggest an unified approach to investigate segregation and its effects on the mechanical properties of polycrystalline alloys using the example of 3$sp$ impurities (Mg, Al, Si, P, or S) at a special type $Σ5(310)[001]$ tilt grain boundary in Cu. We show that for these impurities segregating to the grain boundary the strain contribution to the work of grain boundary decohesion is small and that the chemical contribution correlates with the electronegativity difference between Cu and the impurity. The strain contribution to the work of dislocation emission is calculated to be negative, while the chemical contribution to be always positive. Both the strain and chemical contributions to the work of dislocation emission generally become weaker with the increasing electronegativity from Mg to S. By combining these contributions together we find, in agreement with experimental observations, that a strong segregation of S can reduce the work of grain boundary separation below the work of dislocation emission, thus embrittling Cu, while such an embrittlement cannot be produced by a P segregation because it lowers the energy barrier for dislocation emission relatively more than for work separation.
△ Less
Submitted 11 August, 2017;
originally announced August 2017.
-
Optical properties of Xe color centers in diamond
Authors:
Russell Sandstrom,
Li Ke,
Aiden Martin,
Ziyu Wang,
Mehran Kianinia,
Ben Green,
Weibo Gao,
Igor Aharonovich
Abstract:
Optical properties of color centers in diamond have been the subject of intense research due to their promising applications in quantum photonics. In this work we study the optical properties of Xe related color centers implanted into nitrogen rich (type IIA) and an ultrapure, electronic grade diamond. The Xe defect has two zero phonon lines at ~ 794 and 811 nm, which can be effectively excited us…
▽ More
Optical properties of color centers in diamond have been the subject of intense research due to their promising applications in quantum photonics. In this work we study the optical properties of Xe related color centers implanted into nitrogen rich (type IIA) and an ultrapure, electronic grade diamond. The Xe defect has two zero phonon lines at ~ 794 and 811 nm, which can be effectively excited using both green and red excitation, however, its emission in the nitrogen rich diamond is brighter. Near resonant excitation is performed at cryogenic temperatures and luminescence is probed under strong magnetic field. Our results are important towards the understanding of the Xe related defect and other near infrared color centers in diamond.
△ Less
Submitted 30 March, 2017;
originally announced April 2017.
-
The design and construction of the MICE Electron-Muon Ranger
Authors:
R. Asfandiyarov,
P. Bene,
A. Blondel,
D. Bolognini,
F. Cadoux,
S. Debieux,
F. Drielsma,
G. Giannini,
J. S. Graulich,
C. Husi,
Y. Karadzhov,
D. Lietti,
F. Masciocchi,
L. Nicola,
E. Noah Messomo,
M. Prest,
K. Rothenfusser,
R. Sandstrom,
E. Vallazza,
V. Verguilov,
H. Wisting
Abstract:
The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter installed in the beam line of the Muon Ionization Cooling Experiment (MICE). The experiment will demonstrate ionization cooling, an essential technology needed for the realization of a Neutrino Factory and/or a Muon Collider. The EMR is designed to measure the properties of low energy beams composed of muons, electrons and pions…
▽ More
The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter installed in the beam line of the Muon Ionization Cooling Experiment (MICE). The experiment will demonstrate ionization cooling, an essential technology needed for the realization of a Neutrino Factory and/or a Muon Collider. The EMR is designed to measure the properties of low energy beams composed of muons, electrons and pions, and perform the identification particle-by-particle. The detector consists of 48 orthogonal layers of 59 triangular scintillator bars. The readout is implemented using FPGA custom made electronics and commercially available modules. This article describes the construction of the detector from its design up to its commissioning with cosmic data.
△ Less
Submitted 18 July, 2016;
originally announced July 2016.
-
Quantum Emission from Defects in Single Crystal Hexagonal Boron Nitride
Authors:
Toan Trong Tran,
Cameron Zachreson,
Amanuel Michael Berhane,
Kerem Bray,
Russell Guy Sandstrom,
Lu Hua Li,
Takashi Taniguchi,
Kenji Watanabe,
Igor Aharonovich,
Milos Toth
Abstract:
Bulk hexagonal boron nitride (hBN) is a highly nonlinear natural hyperbolic material that attracts major attention in modern nanophotonics applications. However, studies of its optical properties in the visible part of the spectrum and quantum emitters hosted by bulk hBN have not been reported to date. In this work we study the emission properties of hBN crystals in the red spectral range using su…
▽ More
Bulk hexagonal boron nitride (hBN) is a highly nonlinear natural hyperbolic material that attracts major attention in modern nanophotonics applications. However, studies of its optical properties in the visible part of the spectrum and quantum emitters hosted by bulk hBN have not been reported to date. In this work we study the emission properties of hBN crystals in the red spectral range using sub-bandgap optical excitation. Quantum emission from defects is observed at room temperature and characterized in detail. Our results advance the use of hBN in quantum nanophotonics technologies and enhance our fundamental understanding of its optical properties.
△ Less
Submitted 7 March, 2016;
originally announced March 2016.
-
Localization of narrowband single photon emitters in nanodiamonds
Authors:
Kerem Bray,
Russell Sandstrom,
Christopher Elbadawi,
Martin Fischer,
Matthias Schreck,
Olga Shimoni,
Charlene Lobo,
Milos Toth,
Igor Aharonovich
Abstract:
Diamond nanocrystals that host room temperature narrowband single photon emitters are highly sought after for applications in nanophotonics and bio-imaging. However, current understanding of the origin of these emitters is extremely limited. In this work we demonstrate that the narrowband emitters are point defects localized at extended morphological defects in individual nanodiamonds. In particul…
▽ More
Diamond nanocrystals that host room temperature narrowband single photon emitters are highly sought after for applications in nanophotonics and bio-imaging. However, current understanding of the origin of these emitters is extremely limited. In this work we demonstrate that the narrowband emitters are point defects localized at extended morphological defects in individual nanodiamonds. In particular, we show that nanocrystals with defects such as twin boundaries and secondary nucleation sites exhibit narrowband emission that is absent from pristine individual nanocrystals grown under the same conditions. Critically, we prove that the narrowband emission lines vanish when extended defects are removed deterministically using highly localized electron beam induced etching. Our results enhance the current understanding of single photon emitters in diamond, and are directly relevant to fabrication of novel quantum optics devices and sensors.
△ Less
Submitted 18 January, 2016;
originally announced January 2016.
-
Electron-Muon Ranger: performance in the MICE Muon Beam
Authors:
D. Adams,
A. Alekou,
M. Apollonio,
R. Asfandiyarov,
G. Barber,
P. Barclay,
A. de Bari,
R. Bayes,
V. Bayliss,
P. Bene,
R. Bertoni,
V. J. Blackmore,
A. Blondel,
S. Blot,
M. Bogomilov,
M. Bonesini,
C. N. Booth,
D. Bowring,
S. Boyd,
T. W. Bradshaw,
U. Bravar,
A. D. Bross,
F. Cadoux,
M. Capponi,
T. Carlisle
, et al. (129 additional authors not shown)
Abstract:
The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling c…
▽ More
The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100-280 MeV/$c$.
△ Less
Submitted 3 November, 2015; v1 submitted 28 October, 2015;
originally announced October 2015.
-
Facile Self-Assembly of Quantum Plasmonic Circuit Components
Authors:
Toan Trong Tran,
Jinghua Fang,
Hao Zhang,
Patrik Rath,
Kerem Bray,
Russell Sandstrom,
Olga Shimoni,
Milos Toth,
Igor Aharonovich
Abstract:
Efficient coupling between solid state quantum emitters and plasmonic waveguides is important for the realization of integrated circuits for quantum information, communication and sensing. However, realization of plasmonic circuits is still scarce, particularly due to challenges associated with accurate positioning of quantum emitters near plasmonic resonators. Current pathways for the constructio…
▽ More
Efficient coupling between solid state quantum emitters and plasmonic waveguides is important for the realization of integrated circuits for quantum information, communication and sensing. However, realization of plasmonic circuits is still scarce, particularly due to challenges associated with accurate positioning of quantum emitters near plasmonic resonators. Current pathways for the construction of plasmonic circuits involve cumbersome and costly methods such as scanning atomic force microscopy or mechanical manipulation, where individual elements are physically relocated using the scanning tip. Here, we introduce a simple, fast and cost effective chemical self-assembly method for the attachment of two primary components of a practical plasmonic circuit: a single photon emitter and a waveguide. Our method enables coupling of nanodiamonds with a single quantum emitter (the nitrogen-vacancy (NV) center) onto the terminal of a silver nanowire, by simply varying the concentration of ascorbic acid (AA) in a reaction solution. The AA concentration is used to control the extent of agglomeration, and can be optimised so as to cause preferential, selective activation of the tips of the nanowires. The nanowire-nanodiamond structures show efficient plasmonic coupling of fluorescence emission from single NV centers into surface plasmon polariton (SPP) modes, evidenced by a more than two-fold reduction in fluorescence lifetime and an increase in fluorescence intensity.
△ Less
Submitted 1 August, 2015;
originally announced August 2015.
-
Study of narrowband single photon emitters in polycrystalline diamond films
Authors:
Russell G. Sandstrom,
Olga Shimoni,
Aiden A. Martin,
Igor Aharonovich
Abstract:
Quantum information processing and integrated nanophotonics require robust generation of single photon emitters on demand. In this work we demonstrate that diamond films grown by microwave plasma chemical vapour deposition on a silicon substrate host bright, narrowband single photon emitters in the visible to near infrared spectral range. The emitters possess fast lifetime, absolute photostability…
▽ More
Quantum information processing and integrated nanophotonics require robust generation of single photon emitters on demand. In this work we demonstrate that diamond films grown by microwave plasma chemical vapour deposition on a silicon substrate host bright, narrowband single photon emitters in the visible to near infrared spectral range. The emitters possess fast lifetime, absolute photostability, and exhibit full polarization at excitation and emission. Pulsed and continuous laser excitations confirm their quantum behaviour at room temperature, while low temperature spectroscopy is done to investigate their inhomogeneous broadening. Our results advance the knowledge of solid state single photon sources and open pathways for their practical implementation in quantum communication and quantum information processing.
△ Less
Submitted 19 August, 2014;
originally announced August 2014.