-
Impact of Transit on Mobility, Equity, and Economy in the Chicago Metropolitan Region
Authors:
Omer Verbas,
Taner Cokyasar,
Seamus Joyce-Johnson,
Scott Wainwright,
Maeve Coates,
Aymeric Rousseau,
Jim Aloisi,
Anson Stewart,
Joshua Auld
Abstract:
Transit is essential for urban transportation and achieving net-zero targets. In urban areas like the Chicago Metropolitan Region, transit enhances mobility and connects people, fostering a dynamic economy. To quantify the mobility and selected economic impacts of transit, we use a novel agent-based simulation model POLARIS to compare baseline service against a scenario in which transit is complet…
▽ More
Transit is essential for urban transportation and achieving net-zero targets. In urban areas like the Chicago Metropolitan Region, transit enhances mobility and connects people, fostering a dynamic economy. To quantify the mobility and selected economic impacts of transit, we use a novel agent-based simulation model POLARIS to compare baseline service against a scenario in which transit is completely removed. The transit-removal scenario assumes higher car ownership and results in higher traffic congestion, numerous activity cancellations, and economic decline. In this scenario, average travel times increase by 14.2% regionally and 34.7% within the City of Chicago. The resulting congestion causes significant activity cancellations despite increased car ownership: 11.8% of non-work and 2.8% of work/school activities regionally, totaling an 8.6% overall cancellation rate. In the city, non-work cancellations would reach 26.9%, and work/school cancellations 7.3%, leading to a 19.9% overall cancellation rate. The impact varies between groups. Women and lower-income individuals are more likely to cancel activities than men and higher-income groups. Women account for 53.7% of non-work and 53.0% of total cancellations. The lowest 40% income group experiences 50.2% of non-work and 48.0% of overall cancellations. Combined, activity cancellations, travel time losses, and increased car ownership cost the region $35.4 billion. With annual public transit funding at $2.7 billion, the ratio is 13 to 1, underscoring transit's critical role in mobility, equity, and economic health.
△ Less
Submitted 6 September, 2024;
originally announced September 2024.
-
The PLATO Mission
Authors:
Heike Rauer,
Conny Aerts,
Juan Cabrera,
Magali Deleuil,
Anders Erikson,
Laurent Gizon,
Mariejo Goupil,
Ana Heras,
Jose Lorenzo-Alvarez,
Filippo Marliani,
Cesar Martin-Garcia,
J. Miguel Mas-Hesse,
Laurence O'Rourke,
Hugh Osborn,
Isabella Pagano,
Giampaolo Piotto,
Don Pollacco,
Roberto Ragazzoni,
Gavin Ramsay,
Stéphane Udry,
Thierry Appourchaux,
Willy Benz,
Alexis Brandeker,
Manuel Güdel,
Eduardo Janot-Pacheco
, et al. (801 additional authors not shown)
Abstract:
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observati…
▽ More
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution.
The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.
△ Less
Submitted 8 June, 2024;
originally announced June 2024.
-
Isotope substitution and polytype control for point defects identification: the case of the ultraviolet color center in hexagonal boron nitride
Authors:
J. Plo,
A. Pershin,
S. Li,
T. Poirier,
E. Janzen,
H. Schutte,
M. Tian,
M. Wynn,
S. Bernard,
A. Rousseau,
A. Ibanez,
P. Valvin,
W. Desrat,
T. Michel,
V. Jacques,
B. Gil,
A. Kaminska,
N. Wan,
J. H. Edgar,
A. Gali,
G. Cassabois
Abstract:
Defects in crystals can have a transformative effect on the properties and functionalities of solid-state systems. Dopants in semiconductors are core components in electronic and optoelectronic devices. The control of single color centers is at the basis of advanced applications for quantum technologies. Unintentional defects can also be detrimental to the crystalline structure and hinder the deve…
▽ More
Defects in crystals can have a transformative effect on the properties and functionalities of solid-state systems. Dopants in semiconductors are core components in electronic and optoelectronic devices. The control of single color centers is at the basis of advanced applications for quantum technologies. Unintentional defects can also be detrimental to the crystalline structure and hinder the development of novel materials. Whatever the research perspective, the identification of defects is a key but complicated, and often long-standing issue. Here, we present a general methodology to identify point defects by combining isotope substitution and polytype control, with a systematic comparison between experiments and first-principles calculations. We apply this methodology to hexagonal boron nitride (hBN) and its ubiquitous color center emitting in the ultraviolet spectral range. From isotopic purification of the host hBN matrix, a local vibrational mode of the defect is uncovered, and isotope-selective carbon doping proves that this mode belongs to a carbon-based center. Then, by varying the stacking sequence of the host hBN matrix, we unveil different optical responses to hydrostatic pressure for the non-equivalent configurations of this ultraviolet color center. We conclude that this defect is a carbon dimer in the honeycomb lattice of hBN. Our results show that tuning the stacking sequence in different polytypes of a given crystal provides unique fingerprints contributing to the identification of defects in 2D materials.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Euclid. II. The VIS Instrument
Authors:
Euclid Collaboration,
M. Cropper,
A. Al-Bahlawan,
J. Amiaux,
S. Awan,
R. Azzollini,
K. Benson,
M. Berthe,
J. Boucher,
E. Bozzo,
C. Brockley-Blatt,
G. P. Candini,
C. Cara,
R. A. Chaudery,
R. E. Cole,
P. Danto,
J. Denniston,
A. M. Di Giorgio,
B. Dryer,
J. Endicott,
J. -P. Dubois,
M. Farina,
E. Galli,
L. Genolet,
J. P. D. Gow
, et al. (403 additional authors not shown)
Abstract:
This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift ran…
▽ More
This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift range z=0.1-1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes of Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and, from how this has changed with look-back time, the nature of dark energy and theories of gravity can be constrained. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, reaching m_AB>24.5 with S/N >10 in a single broad I_E~(r+i+z) band over a six year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the VIS concept and describes the instrument design and development before reporting the pre-launch performance derived from ground calibrations and brief results from the in-orbit commissioning. VIS should reach fainter than m_AB=25 with S/N>10 for galaxies of full-width half-maximum of 0.3" in a 1.3" diameter aperture over the Wide Survey, and m_AB>26.4 for a Deep Survey that will cover more than 50 deg^2. The paper also describes how VIS works with the other Euclid components of survey, telescope, and science data processing to extract the cosmological information.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Layer-by-layer connection for large area single crystal boron nitride multilayer films
Authors:
Hui Shi,
Mingyuan Wang,
Hongying Chen,
Adrien Rousseau,
Junpeng Shu,
Ming Tian,
Ruowang Chen,
Juliette Plo,
Pierre Valvin,
Bernard Gil,
Jiajie Qi,
Qinghe Wang,
Kaihui Liu,
Mingliang Zhang,
Guillaume Cassabois,
Di Wu,
Neng Wan
Abstract:
Boron nitride (BN) is today considered as one of the most promising materials for many novel applications including bright single photon emission, deep UV opto-electronics, small sized solid-state neutron detector, and high-performance two-dimensional materials, etc. Despite the recent successful fabrication of large-area BN single-crystals (typically <= 5 atomic layers), the scalable growth of th…
▽ More
Boron nitride (BN) is today considered as one of the most promising materials for many novel applications including bright single photon emission, deep UV opto-electronics, small sized solid-state neutron detector, and high-performance two-dimensional materials, etc. Despite the recent successful fabrication of large-area BN single-crystals (typically <= 5 atomic layers), the scalable growth of thicker single-crystalline BN films still constitutes a great challenge. In this work, we demonstrate an approach to grow large-area multilayer single-crystal BN films by chemical vapor deposition on face-centered cubic Fe-Ni (111) single crystal alloy thin films with different stoichiometric phases. We show that the BN growth is greatly tunable and improved by increasing the Fe content in single-crystal Fe-Ni (111). The formation of pyramid-shaped multilayer BN domains with aligned orientation enables a continuous connection following a layer-by-layer, 'first-meet-first-connect', mosaic stitching mechanism. By means of selected area electron diffraction, micro-photoluminescence spectroscopy in the deep UV and high-resolution transmission electron microscopy, the layer-by-layer connection mechanism is unambiguously evidenced, and the stacking order has been verified to occur as unidirectional AB and ABC stackings, i.e., in the Bernal and rhombohedral BN phase.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Large-Scale Evaluation of Mobility, Technology and Demand Scenarios in the Chicago Region Using POLARIS
Authors:
Joshua Auld,
Jamie Cook,
Krishna Murthy Gurumurthy,
Nazmul Khan,
Charbel Mansour,
Aymeric Rousseau,
Olcay Sahin,
Felipe de Souza,
Omer Verbas,
Natalia Zuniga-Garcia
Abstract:
Rapid technological progress and innovation in the areas of vehicle connectivity, automation and electrification, new modes of shared and alternative mobility, and advanced transportation system demand and supply management strategies, have motivated numerous questions and studies regarding the potential impact on key performance and equity metrics. Several of these areas of development may or may…
▽ More
Rapid technological progress and innovation in the areas of vehicle connectivity, automation and electrification, new modes of shared and alternative mobility, and advanced transportation system demand and supply management strategies, have motivated numerous questions and studies regarding the potential impact on key performance and equity metrics. Several of these areas of development may or may not have a synergistic outcome on the overall benefits such as reduction in congestion and travel times. In this study, the use of an end-to-end modeling workflow centered around an activity-based agent-based travel demand forecasting tool called POLARIS is explored to provide insights on the effects of several different technology deployments and operational policies in combination for the Chicago region. The objective of the research was to explore the direct impacts and observe any interactions between the various policy and technology scenarios to help better characterize and evaluate their potential future benefits. We analyze system outcome metrics on mobility, energy and emissions, equity and environmental justice and overall efficiency for a scenario design of experiments that looks at combinations of supply interventions (congestion pricing, transit expansion, tnc policy, off-hours freight policy, connected signal optimization) for different potential demand scenarios defined by e-commerce and on-demand delivery engagement, and market penetration of electric vehicles. We found different combinations of strategies that can reduce overall travel times up to 7% and increase system efficiency up to 53% depending on how various metrics are prioritized. The results demonstrate the importance of considering various interventions jointly.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Boron and nitrogen isotope effects on hexagonal boron nitride properties
Authors:
E. Janzen,
H. Schutte,
J. Plo,
A. Rousseau,
T. Michel,
W. Desrat,
P. Valvin,
V. Jacques,
G. Cassabois,
B. Gil,
J. H. Edgar
Abstract:
The unique physical, mechanical, chemical, optical, and electronic properties of hexagonal boron nitride (hBN) make it a promising two-dimensional material for electronic, optoelectronic, nanophotonic, and quantum devices. Here we report on the changes in hBN's properties induced by isotopic purification in both boron and nitrogen. Previous studies on isotopically pure hBN have focused on purifyin…
▽ More
The unique physical, mechanical, chemical, optical, and electronic properties of hexagonal boron nitride (hBN) make it a promising two-dimensional material for electronic, optoelectronic, nanophotonic, and quantum devices. Here we report on the changes in hBN's properties induced by isotopic purification in both boron and nitrogen. Previous studies on isotopically pure hBN have focused on purifying the boron isotope concentration in hBN from its natural concentration (approximately 20 at$\%$ $^{10}$B, 80 at$\%$ $^{11}$B) while using naturally abundant nitrogen (99.6 at$\%$ $^{14}$N, 0.4 at$\%$ $^{15}$N), i.e. almost pure $^{14}$N. In this study, we extend the class of isotopically-purified hBN crystals to $^{15}$N. Crystals in the four configurations, namely h$^{10}$B$^{14}$N, h$^{11}$B$^{14}$N, h$^{10}$B$^{15}$N, and h$^{11}$B$^{15}$N, were grown by the metal flux method using boron and nitrogen single isotope ($>99\%$) enriched sources, with nickel plus chromium as the solvent. In-depth Raman and photoluminescence spectroscopies demonstrate the high quality of the monoisotopic hBN crystals with vibrational and optical properties of the $^{15}$N-purified crystals at the state of the art of currently available $^{14}$N-purified hBN. The growth of high-quality h$^{10}$B$^{14}$N, h$^{11}$B$^{14}$N, h$^{10}$B$^{15}$N, and h$^{11}$B$^{15}$N opens exciting perspectives for thermal conductivity control in heat management, as well as for advanced functionalities in quantum technologies.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
Evaluating Feature Attribution Methods in the Image Domain
Authors:
Arne Gevaert,
Axel-Jan Rousseau,
Thijs Becker,
Dirk Valkenborg,
Tijl De Bie,
Yvan Saeys
Abstract:
Feature attribution maps are a popular approach to highlight the most important pixels in an image for a given prediction of a model. Despite a recent growth in popularity and available methods, little attention is given to the objective evaluation of such attribution maps. Building on previous work in this domain, we investigate existing metrics and propose new variants of metrics for the evaluat…
▽ More
Feature attribution maps are a popular approach to highlight the most important pixels in an image for a given prediction of a model. Despite a recent growth in popularity and available methods, little attention is given to the objective evaluation of such attribution maps. Building on previous work in this domain, we investigate existing metrics and propose new variants of metrics for the evaluation of attribution maps. We confirm a recent finding that different attribution metrics seem to measure different underlying concepts of attribution maps, and extend this finding to a larger selection of attribution metrics. We also find that metric results on one dataset do not necessarily generalize to other datasets, and methods with desirable theoretical properties such as DeepSHAP do not necessarily outperform computationally cheaper alternatives. Based on these findings, we propose a general benchmarking approach to identify the ideal feature attribution method for a given use case. Implementations of attribution metrics and our experiments are available online.
△ Less
Submitted 9 August, 2024; v1 submitted 22 February, 2022;
originally announced February 2022.
-
A Deep Learning Approach for Macroscopic Energy Consumption Prediction with Microscopic Quality for Electric Vehicles
Authors:
Ayman Moawad,
Krishna Murthy Gurumurthy,
Omer Verbas,
Zhijian Li,
Ehsan Islam,
Vincent Freyermuth,
Aymeric Rousseau
Abstract:
This paper presents a machine learning approach to model the electric consumption of electric vehicles at macroscopic level, i.e., in the absence of a speed profile, while preserving microscopic level accuracy. For this work, we leveraged a high-performance, agent-based transportation tool to model trips that occur in the Greater Chicago region under various scenario changes, along with physics-ba…
▽ More
This paper presents a machine learning approach to model the electric consumption of electric vehicles at macroscopic level, i.e., in the absence of a speed profile, while preserving microscopic level accuracy. For this work, we leveraged a high-performance, agent-based transportation tool to model trips that occur in the Greater Chicago region under various scenario changes, along with physics-based modeling and simulation tools to provide high-fidelity energy consumption values. The generated results constitute a very large dataset of vehicle-route energy outcomes that capture variability in vehicle and routing setting, and in which high-fidelity time series of vehicle speed dynamics is masked. We show that although all internal dynamics that affect energy consumption are masked, it is possible to learn aggregate-level energy consumption values quite accurately with a deep learning approach. When large-scale data is available, and with carefully tailored feature engineering, a well-designed model can overcome and retrieve latent information. This model has been deployed and integrated within POLARIS Transportation System Simulation Tool to support real-time behavioral transportation models for individual charging decision-making, and rerouting of electric vehicles.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
A Real-Time Energy and Cost Efficient Vehicle Route Assignment Neural Recommender System
Authors:
Ayman Moawad,
Zhijian Li,
Ines Pancorbo,
Krishna Murthy Gurumurthy,
Vincent Freyermuth,
Ehsan Islam,
Ram Vijayagopal,
Monique Stinson,
Aymeric Rousseau
Abstract:
This paper presents a neural network recommender system algorithm for assigning vehicles to routes based on energy and cost criteria. In this work, we applied this new approach to efficiently identify the most cost-effective medium and heavy duty truck (MDHDT) powertrain technology, from a total cost of ownership (TCO) perspective, for given trips. We employ a machine learning based approach to ef…
▽ More
This paper presents a neural network recommender system algorithm for assigning vehicles to routes based on energy and cost criteria. In this work, we applied this new approach to efficiently identify the most cost-effective medium and heavy duty truck (MDHDT) powertrain technology, from a total cost of ownership (TCO) perspective, for given trips. We employ a machine learning based approach to efficiently estimate the energy consumption of various candidate vehicles over given routes, defined as sequences of links (road segments), with little information known about internal dynamics, i.e using high level macroscopic route information. A complete recommendation logic is then developed to allow for real-time optimum assignment for each route, subject to the operational constraints of the fleet. We show how this framework can be used to (1) efficiently provide a single trip recommendation with a top-$k$ vehicles star ranking system, and (2) engage in more general assignment problems where $n$ vehicles need to be deployed over $m \leq n$ trips. This new assignment system has been deployed and integrated into the POLARIS Transportation System Simulation Tool for use in research conducted by the Department of Energy's Systems and Modeling for Accelerated Research in Transportation (SMART) Mobility Consortium
△ Less
Submitted 21 October, 2021;
originally announced October 2021.
-
Combining Bayesian and Deep Learning Methods for the Delineation of the Fan in Ultrasound Images
Authors:
Hind Dadoun,
Hervé Delingette,
Anne-Laure Rousseau,
Eric de Kerviler,
Nicholas Ayache
Abstract:
Ultrasound (US) images usually contain identifying information outside the ultrasound fan area and manual annotations placed by the sonographers during exams. For those images to be exploitable in a Deep Learning framework, one needs to first delineate the border of the fan which delimits the ultrasound fan area and then remove other annotations inside. We propose a parametric probabilistic approa…
▽ More
Ultrasound (US) images usually contain identifying information outside the ultrasound fan area and manual annotations placed by the sonographers during exams. For those images to be exploitable in a Deep Learning framework, one needs to first delineate the border of the fan which delimits the ultrasound fan area and then remove other annotations inside. We propose a parametric probabilistic approach for the first task. We make use of this method to generate a training data set with segmentation masks of the region of interest (ROI) and train a U-Net to perform the same task in a supervised way, thus considerably reducing computational time of the method, one hundred and sixty times faster. These images are then processed with existing inpainting methods to remove annotations present inside the fan area. To the best of our knowledge, this is the first parametric approach to quickly detect the fan in an ultrasound image without any other information than the image itself.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
On the use of Self-supervised Pre-trained Acoustic and Linguistic Features for Continuous Speech Emotion Recognition
Authors:
Manon Macary,
Marie Tahon,
Yannick Estève,
Anthony Rousseau
Abstract:
Pre-training for feature extraction is an increasingly studied approach to get better continuous representations of audio and text content. In the present work, we use wav2vec and camemBERT as self-supervised learned models to represent our data in order to perform continuous emotion recognition from speech (SER) on AlloSat, a large French emotional database describing the satisfaction dimension,…
▽ More
Pre-training for feature extraction is an increasingly studied approach to get better continuous representations of audio and text content. In the present work, we use wav2vec and camemBERT as self-supervised learned models to represent our data in order to perform continuous emotion recognition from speech (SER) on AlloSat, a large French emotional database describing the satisfaction dimension, and on the state of the art corpus SEWA focusing on valence, arousal and liking dimensions. To the authors' knowledge, this paper presents the first study showing that the joint use of wav2vec and BERT-like pre-trained features is very relevant to deal with continuous SER task, usually characterized by a small amount of labeled training data. Evaluated by the well-known concordance correlation coefficient (CCC), our experiments show that we can reach a CCC value of 0.825 instead of 0.592 when using MFCC in conjunction with word2vec word embedding on the AlloSat dataset.
△ Less
Submitted 18 November, 2020;
originally announced November 2020.
-
Post Training Uncertainty Calibration of Deep Networks For Medical Image Segmentation
Authors:
Axel-Jan Rousseau,
Thijs Becker,
Jeroen Bertels,
Matthew B. Blaschko,
Dirk Valkenborg
Abstract:
Neural networks for automated image segmentation are typically trained to achieve maximum accuracy, while less attention has been given to the calibration of their confidence scores. However, well-calibrated confidence scores provide valuable information towards the user. We investigate several post hoc calibration methods that are straightforward to implement, some of which are novel. They are co…
▽ More
Neural networks for automated image segmentation are typically trained to achieve maximum accuracy, while less attention has been given to the calibration of their confidence scores. However, well-calibrated confidence scores provide valuable information towards the user. We investigate several post hoc calibration methods that are straightforward to implement, some of which are novel. They are compared to Monte Carlo (MC) dropout. They are applied to neural networks trained with cross-entropy (CE) and soft Dice (SD) losses on BraTS 2018 and ISLES 2018. Surprisingly, models trained on SD loss are not necessarily less calibrated than those trained on CE loss. In all cases, at least one post hoc method improves the calibration. There is limited consistency across the results, so we can't conclude on one method being superior. In all cases, post hoc calibration is competitive with MC dropout. Although average calibration improves compared to the base model, subject-level variance of the calibration remains similar.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Personalized pathology test for Cardio-vascular disease: Approximate Bayesian computation with discriminative summary statistics learning
Authors:
Ritabrata Dutta,
Karim Zouaoui-Boudjeltia,
Christos Kotsalos,
Alexandre Rousseau,
Daniel Ribeiro de Sousa,
Jean-Marc Desmet,
Alain Van Meerhaeghe,
Antonietta Mira,
Bastien Chopard
Abstract:
Cardio/cerebrovascular diseases (CVD) have become one of the major health issue in our societies. But recent studies show that the present pathology tests to detect CVD are ineffectual as they do not consider different stages of platelet activation or the molecular dynamics involved in platelet interactions and are incapable to consider inter-individual variability. Here we propose a stochastic pl…
▽ More
Cardio/cerebrovascular diseases (CVD) have become one of the major health issue in our societies. But recent studies show that the present pathology tests to detect CVD are ineffectual as they do not consider different stages of platelet activation or the molecular dynamics involved in platelet interactions and are incapable to consider inter-individual variability. Here we propose a stochastic platelet deposition model and an inferential scheme to estimate the biologically meaningful model parameters using approximate Bayesian computation with a summary statistic that maximally discriminates between different types of patients. Inferred parameters from data collected on healthy volunteers and different patient types help us to identify specific biological parameters and hence biological reasoning behind the dysfunction for each type of patients. This work opens up an unprecedented opportunity of personalized pathology test for CVD detection and medical treatment.
△ Less
Submitted 9 February, 2022; v1 submitted 13 October, 2020;
originally announced October 2020.
-
Explainable AI for a No-Teardown Vehicle Component Cost Estimation: A Top-Down Approach
Authors:
Ayman Moawad,
Ehsan Islam,
Namdoo Kim,
Ram Vijayagopal,
Aymeric Rousseau,
Wei Biao Wu
Abstract:
The broader ambition of this article is to popularize an approach for the fair distribution of the quantity of a system's output to its subsystems, while allowing for underlying complex subsystem level interactions. Particularly, we present a data-driven approach to vehicle price modeling and its component price estimation by leveraging a combination of concepts from machine learning and game theo…
▽ More
The broader ambition of this article is to popularize an approach for the fair distribution of the quantity of a system's output to its subsystems, while allowing for underlying complex subsystem level interactions. Particularly, we present a data-driven approach to vehicle price modeling and its component price estimation by leveraging a combination of concepts from machine learning and game theory. We show an alternative to common teardown methodologies and surveying approaches for component and vehicle price estimation at the manufacturer's suggested retail price (MSRP) level that has the advantage of bypassing the uncertainties involved in 1) the gathering of teardown data, 2) the need to perform expensive and biased surveying, and 3) the need to perform retail price equivalent (RPE) or indirect cost multiplier (ICM) adjustments to mark up direct manufacturing costs to MSRP. This novel exercise not only provides accurate pricing of the technologies at the customer level, but also shows the, a priori known, large gaps in pricing strategies between manufacturers, vehicle sizes, classes, market segments, and other factors. There is also clear synergism or interaction between the price of certain technologies and other specifications present in the same vehicle. Those (unsurprising) results are indication that old methods of manufacturer-level component costing, aggregation, and the application of a flat and rigid RPE or ICM adjustment factor should be carefully examined. The findings are based on an extensive database, developed by Argonne National Laboratory, that includes more than 64,000 vehicles covering MY1990 to MY2020 over hundreds of vehicle specs.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Mid-infrared polarized emission from black phosphorus light-emitting diodes
Authors:
Junjia Wang,
Adrien Rousseau,
Mei Yang,
Tony Low,
Sébastien Francoeur,
Stéphane Kéna-Cohen
Abstract:
The mid-infrared (MIR) spectral range is of immense use for civilian and military applications. The large number of vibrational absorption bands in this range can be used for gas sensing, process control and spectroscopy. In addition, there exists transparency windows in the atmosphere such as that between 3.6-3.8 $μ$m, which are ideal for free-space optical communication, range finding and therma…
▽ More
The mid-infrared (MIR) spectral range is of immense use for civilian and military applications. The large number of vibrational absorption bands in this range can be used for gas sensing, process control and spectroscopy. In addition, there exists transparency windows in the atmosphere such as that between 3.6-3.8 $μ$m, which are ideal for free-space optical communication, range finding and thermal imaging. A number of different semiconductor platforms have been used for MIR light-emission. This includes InAsSb/InAs quantum wells, InSb/AlInSb, GaInAsSbP pentanary alloys, and intersubband transitions in group III-V compounds. These approaches, however, are costly and lack the potential for integration on silicon and silicon-on-insulator platforms. In this respect, two-dimensional (2D) materials are particularly attractive due to the ease with which they can be heterointegrated. Weak interactions between neighbouring atomic layers in these materials allows for deposition on arbitrary substrates and van der Waals heterostructures enable the design of devices with targeted optoelectronic properties. In this Letter, we demonstrate a light-emitting diode (LED) based on the 2D semiconductor black phosphorus (BP). The device, which is composed of a BP/molybdenum disulfide (MoS$_2$) heterojunction emits polarized light at $λ$ = 3.68 $μ$m with room-temperature internal and external quantum efficiencies (IQE and EQE) of ~1$\%$ and $\sim3\times10^{-2}\%$, respectively. The ability to tune the bandgap, and consequently emission wavelength of BP, with layer number, strain and electric field make it a particularly attractive platform for MIR emission.
△ Less
Submitted 20 November, 2019;
originally announced November 2019.
-
Spectral responsivity and photoconductive gain in thin film black phosphorus photodetectors
Authors:
Junjia Wang,
Adrien Rousseau,
Elad Eizner,
Anne-Laurence Phaneuf-L'Heureux,
Léonard Schue,
Sébastien Francoeur,
Stéphane Kéna-Cohen
Abstract:
We have fabricated black phosphorus photodetectors and characterized their full spectral responsivity. These devices, which are effectively in the bulk thin film limit, show broadband responsivity ranging from <400 nm to the ~3.8 $μ$m bandgap. In the visible, an intrinsic responsivity >7 A/W can be obtained due to internal gain mechanisms. By examining the full spectral response, we identify a sha…
▽ More
We have fabricated black phosphorus photodetectors and characterized their full spectral responsivity. These devices, which are effectively in the bulk thin film limit, show broadband responsivity ranging from <400 nm to the ~3.8 $μ$m bandgap. In the visible, an intrinsic responsivity >7 A/W can be obtained due to internal gain mechanisms. By examining the full spectral response, we identify a sharp contrast between the visible and infrared behavior. In particular, the visible responsivity shows a large photoconductive gain and gate-voltge dependence, while the infrared responsivity is nearly independent of gate voltage and incident light intensity under most conditions. This is attributed to a contribution from the surface oxide. In addition, we find that the polarization anisotropy in responsivity along armchair and zigzag directions can be as large as 103 and extends from the band edge to 500 nm. The devices were fabricated in an inert atmosphere and encapsulated by Al$_2$O$_3$ providing stable operation for more than 6 months.
△ Less
Submitted 25 June, 2019;
originally announced June 2019.
-
Effects of Predictive Real-Time Traffic Signal Information
Authors:
Vadim Sokolov,
David W. Etherington,
Christian Schmid,
Dominik Karbowski,
Aymeric Rousseau,
Muhammad Imran
Abstract:
This paper analyzes the impact of providing car drivers with predictive information on traffic signal timing in real-time, including time-to-green and green-wave speed recommendations. Over a period of six months, the behavior of these 121 drivers in everyday urban driving was analyzed with and without access to live traffic signal information. In a first period, drivers had the information provid…
▽ More
This paper analyzes the impact of providing car drivers with predictive information on traffic signal timing in real-time, including time-to-green and green-wave speed recommendations. Over a period of six months, the behavior of these 121 drivers in everyday urban driving was analyzed with and without access to live traffic signal information. In a first period, drivers had the information providing service disabled in order to establish a baseline behavior; after that initial phase, the service was activated. In both cases, data from smartphone and vehicle sensors was collected, including speed, acceleration, fuel rate, acceleration and brake pedal positions. We estimated the changes in the driving behavior which result from drivers' receiving the traffic signal timing information by carefully comparing distributions of acceleration/deceleration patterns through statistical analysis. Our analysis demonstrates that there is a positive effect of providing traffic signal information timing to the drivers.
△ Less
Submitted 9 November, 2018; v1 submitted 7 July, 2018;
originally announced July 2018.
-
Reactive species involved in higher seeds germination and shoots vigor through direct plasma exposure and plasma-activated liquids
Authors:
T. Dufour,
S. Zhang,
S. Simon,
A. Rousseau
Abstract:
Cold atmospheric plasma treatments have been applied on lenses seeds and shoots to improve their germination and vigor rates. Two approaches have been considered: direct plasma exposure and plasma activation of liquids (tap water, demineralized water and liquid fertilizer). A special focus has been drawn on reactive oxygen species generated in the plasma phase but also in plasma activated media to…
▽ More
Cold atmospheric plasma treatments have been applied on lenses seeds and shoots to improve their germination and vigor rates. Two approaches have been considered: direct plasma exposure and plasma activation of liquids (tap water, demineralized water and liquid fertilizer). A special focus has been drawn on reactive oxygen species generated in the plasma phase but also in plasma activated media to understand their impact on germination process as well as on plants growth.
△ Less
Submitted 6 February, 2018;
originally announced February 2018.
-
Single and multiple pin(s)-to-liquid discharges: connecting self-organization patterns and ROS production in liquids for plasma agronomy application
Authors:
S. Zhang,
A. Rousseau,
T. Dufour
Abstract:
Pin-to-liquid discharges are investigated for the activation of liquids dedicated to agriculture applications. They are characterized through their electrical and optical properties, with a particular attention paid to their filaments and self-organized patterns occurring at the liquid interface. We show how modulating their interaction with ambient air can promote the production of reactive speci…
▽ More
Pin-to-liquid discharges are investigated for the activation of liquids dedicated to agriculture applications. They are characterized through their electrical and optical properties, with a particular attention paid to their filaments and self-organized patterns occurring at the liquid interface. We show how modulating their interaction with ambient air can promote the production of reactive species in liquids such as H2O2, NO2- and NO3-. The effects of the resulting plasma activated media are reported on lentils seeds.
△ Less
Submitted 6 February, 2018;
originally announced February 2018.
-
Hijacking .NET to Defend PowerShell
Authors:
Amanda Rousseau
Abstract:
With the rise of attacks using PowerShell in the recent months, there has not been a comprehensive solution for monitoring or prevention. Microsoft recently released the AMSI solution for PowerShell v5, however this can also be bypassed. This paper focuses on repurposing various stealthy runtime .NET hijacking techniques implemented for PowerShell attacks for defensive monitoring of PowerShell. It…
▽ More
With the rise of attacks using PowerShell in the recent months, there has not been a comprehensive solution for monitoring or prevention. Microsoft recently released the AMSI solution for PowerShell v5, however this can also be bypassed. This paper focuses on repurposing various stealthy runtime .NET hijacking techniques implemented for PowerShell attacks for defensive monitoring of PowerShell. It begins with a brief introduction to .NET and PowerShell, followed by a deeper explanation of various attacker techniques, which is explained from the perspective of the defender, including assembly modification, class and method injection, compiler profiling, and C based function hooking. Of the four attacker techniques that are repurposed for defensive real-time monitoring of PowerShell execution, intermediate language binary modification, JIT hooking, and machine code manipulation provide the best results for stealthy run-time interfaces for PowerShell scripting analysis.
△ Less
Submitted 21 September, 2017;
originally announced September 2017.
-
Anisotropic phase diagram and spin fluctuations of the hyperkagome magnet Gd3Ga5O12 as revealed by sound velocity measurements
Authors:
A. Rousseau,
J. -M. Parent,
J. A. Quilliam
Abstract:
Sound velocity and attenuation measurements on the frustrated garnet material Gd3Ga5O12 (GGG) are presented as a function of field and temperature, using two different acoustic modes and with two different magnetic field orientations: [100] and [110]. We demonstrate that the phase diagram is highly anisotropic, with two distinct field-induced ordered phases for H||[110] and only one for H||[100].…
▽ More
Sound velocity and attenuation measurements on the frustrated garnet material Gd3Ga5O12 (GGG) are presented as a function of field and temperature, using two different acoustic modes and with two different magnetic field orientations: [100] and [110]. We demonstrate that the phase diagram is highly anisotropic, with two distinct field-induced ordered phases for H||[110] and only one for H||[100]. Extensive lattice softening is found to occur at low fields, which can be associated with spin fluctuations. However, deep within the spin liquid phase a low-temperature stiffening of the lattice and reduced attenuation provides evidence for a spin gap which may be related to short-range antiferromagnetic correlations over minimal 10-spin loops.
△ Less
Submitted 16 August, 2017; v1 submitted 16 August, 2017;
originally announced August 2017.
-
Promoting lentil germination and stem growth by plasma activated tap water, demineralized water and liquid fertilizer
Authors:
S. Zhang,
A. Rousseau,
T. Dufour
Abstract:
Tap water, demineralized water and liquid fertilizer have been activated using an atmospheric pressure plasma jet (APPJ) to investigate their benefits for the germination rate and stem elongation rate of lentils from Puy-en-Velay (France). By plasma-activating tap water, we have obtained germination rates as high as 80% (instead of 30% with tap water). Also, higher stem elongation rates and final…
▽ More
Tap water, demineralized water and liquid fertilizer have been activated using an atmospheric pressure plasma jet (APPJ) to investigate their benefits for the germination rate and stem elongation rate of lentils from Puy-en-Velay (France). By plasma-activating tap water, we have obtained germination rates as high as 80% (instead of 30% with tap water). Also, higher stem elongation rates and final stem lengths were obtained using activated tap water compared with commercial fertilizer. We show that these rates of germination and stem growth strongly depend on the combination of two radicals generated in the liquids by the plasma: hydrogen peroxide and nitrate. This synergy appears to be a condition for releasing seed dormancy through the endogenous production of NO radicals.
△ Less
Submitted 25 July, 2017;
originally announced July 2017.
-
Direct measurement of the electron energy relaxation dynamics in metallic wires
Authors:
Edouard Pinsolle,
Alexandre Rousseau,
Christian Lupien,
Bertrand Reulet
Abstract:
We present measurements of the dynamical response of thermal noise to an ac excitation in conductors at low temperature. From the frequency dependence of this response function - the noise thermal impedance - in the range 1 kHz-1 GHz we obtain direct determinations of the inelastic relaxation times relevant in metallic wires at low temperature: the electron-phonon scattering time and the diffusion…
▽ More
We present measurements of the dynamical response of thermal noise to an ac excitation in conductors at low temperature. From the frequency dependence of this response function - the noise thermal impedance - in the range 1 kHz-1 GHz we obtain direct determinations of the inelastic relaxation times relevant in metallic wires at low temperature: the electron-phonon scattering time and the diffusion time of electrons along the wires. Combining these results with that of resistivity provides a measurement of heat capacity of samples made of thin film. The simplicity and reliability of this technique makes it very promising for future applications in other systems.
△ Less
Submitted 14 June, 2016; v1 submitted 29 March, 2016;
originally announced March 2016.
-
The Large Observatory For x-ray Timing
Authors:
M. Feroci,
J. W. den Herder,
E. Bozzo,
D. Barret,
S. Brandt,
M. Hernanz,
M. van der Klis,
M. Pohl,
A. Santangelo,
L. Stella,
A. Watts,
J. Wilms,
S. Zane,
M. Ahangarianabhari,
C. Albertus,
M. Alford,
A. Alpar,
D. Altamirano,
L. Alvarez,
L. Amati,
C. Amoros,
N. Andersson,
A. Antonelli,
A. Argan,
R. Artigue
, et al. (320 additional authors not shown)
Abstract:
The Large Observatory For x-ray Timing (LOFT) was studied within ESA M3 Cosmic Vision framework and participated in the final down-selection for a launch slot in 2022-2024. Thanks to the unprecedented combination of effective area and spectral resolution of its main instrument, LOFT will study the behaviour of matter under extreme conditions, such as the strong gravitational field in the innermost…
▽ More
The Large Observatory For x-ray Timing (LOFT) was studied within ESA M3 Cosmic Vision framework and participated in the final down-selection for a launch slot in 2022-2024. Thanks to the unprecedented combination of effective area and spectral resolution of its main instrument, LOFT will study the behaviour of matter under extreme conditions, such as the strong gravitational field in the innermost regions of accretion flows close to black holes and neutron stars, and the supra-nuclear densities in the interior of neutron stars. The science payload is based on a Large Area Detector (LAD, 10 m 2 effective area, 2-30 keV, 240 eV spectral resolution, 1 deg collimated field of view) and a WideField Monitor (WFM, 2-50 keV, 4 steradian field of view, 1 arcmin source location accuracy, 300 eV spectral resolution). The WFM is equipped with an on-board system for bright events (e.g. GRB) localization. The trigger time and position of these events are broadcast to the ground within 30 s from discovery. In this paper we present the status of the mission at the end of its Phase A study.
△ Less
Submitted 29 August, 2014; v1 submitted 27 August, 2014;
originally announced August 2014.
-
Modeling the wind circulation around mills with a Lagrangian stochastic approach
Authors:
Mireille Bossy,
Jose Espina,
Jacques Morice,
Cristian Paris,
Antoine Rousseau
Abstract:
This work aims at introducing model methodology and numerical studies related to a Lagrangian stochastic approach applied to the computation of the wind circulation around mills. We adapt the Lagrangian stochastic downscaling method that we have introduced in [3] and [4] to the atmospheric boundary layer and we introduce here a Lagrangian version of the actuator disc methods to take account of the…
▽ More
This work aims at introducing model methodology and numerical studies related to a Lagrangian stochastic approach applied to the computation of the wind circulation around mills. We adapt the Lagrangian stochastic downscaling method that we have introduced in [3] and [4] to the atmospheric boundary layer and we introduce here a Lagrangian version of the actuator disc methods to take account of the mills. We present our numerical method and numerical experiments in the case of non rotating and rotating actuator disc models. We also present some features of our numerical method, in particular the computation of the probability distribution of the wind in the wake zone, as a byproduct of the fluid particle model and the associated PDF method.
△ Less
Submitted 6 September, 2016; v1 submitted 16 April, 2014;
originally announced April 2014.
-
Paralic confinement computations in coastal environment with interlocked areas
Authors:
Jean-Philippe Bernard,
Emmanuel Frenod,
Antoine Rousseau
Abstract:
This paper is in the continuity of a work program. Its goal is to develop an approach of the paralic confinement usable from the modeling slant, before implementing it in numerical tools. More specifically, we here deal with the multiscale aspect of the confinement. If a paralic environment is separated into two (or more) connected areas, we will show that is possible to split the confinement prob…
▽ More
This paper is in the continuity of a work program. Its goal is to develop an approach of the paralic confinement usable from the modeling slant, before implementing it in numerical tools. More specifically, we here deal with the multiscale aspect of the confinement. If a paralic environment is separated into two (or more) connected areas, we will show that is possible to split the confinement problem into two related problems, one for each area. At the end of this paper, we will focus on the importance of the interface length between the two subdomains.
△ Less
Submitted 12 June, 2013;
originally announced June 2013.
-
Design and analysis of a Schwarz coupling method for a dimensionally heterogeneous problem
Authors:
Manel Tayachi Pigeonnat,
Antoine Rousseau,
Eric Blayo,
Nicole Goutal,
Véronique Martin
Abstract:
In the present work, we study and analyze an efficient iterative coupling method for a dimensionally heterogeneous problem . We consider the case of 2-D Laplace equation with non symmetric boundary conditions with a corresponding 1-D Laplace equation. We will first show how to obtain the 1-D model from the 2-D one by integration along one direction, by analogy with the link between shallow water e…
▽ More
In the present work, we study and analyze an efficient iterative coupling method for a dimensionally heterogeneous problem . We consider the case of 2-D Laplace equation with non symmetric boundary conditions with a corresponding 1-D Laplace equation. We will first show how to obtain the 1-D model from the 2-D one by integration along one direction, by analogy with the link between shallow water equations and the Navier-Stokes system. Then, we will focus on the design of an Schwarz-like iterative coupling method. We will discuss the choice of boundary conditions at coupling interfaces. We will prove the convergence of such algorithms and give some theoretical results related to the choice of the location of the coupling interface, and the control of the difference between a global 2-D reference solution and the 2-D coupled one. These theoretical results will be illustrated numerically.
△ Less
Submitted 18 December, 2012;
originally announced December 2012.
-
Polaron relaxation in ferroelectric thin films
Authors:
E. Arveux,
D. Levasseur,
A. Rousseau,
S. Payan,
M. Maglione,
G. Guegan
Abstract:
We report a dielectric relaxation in ferroelectric thin films of the ABO3 family. We have compared films of different compositions with several growth modes: sputtering (with and without magnetron) and sol-gel. The relaxation was observed at cryogenic temperature (T<100K) for frequencies from 100Hz up to 10MHz. This relaxation activation energy is always lower than 200meV. It is very similar to th…
▽ More
We report a dielectric relaxation in ferroelectric thin films of the ABO3 family. We have compared films of different compositions with several growth modes: sputtering (with and without magnetron) and sol-gel. The relaxation was observed at cryogenic temperature (T<100K) for frequencies from 100Hz up to 10MHz. This relaxation activation energy is always lower than 200meV. It is very similar to the polaron relaxation that we reported in the parent bulk perovskites. Being independent of the materials size, morphology and texture, this relaxation can be a useful probe of defects in actual integrated capacitors with no need for specific shaping
△ Less
Submitted 10 January, 2012;
originally announced January 2012.
-
Epitaxial refractory-metal buer layers with a chemical gradient for adjustable lattice parameter and controlled chemical interface
Authors:
Olivier Fruchart,
Anthony Rousseau,
Didier Schmaus,
A. L'Hoir,
Richard Haettel,
L. Ortega
Abstract:
We have developed and characterized the structure and composition of nanometers-thick solid-solution epitaxial layers of (V,Nb) on sapphire (1120), displaying a continuous lateral gradient of composition from one to another pure element. Further covered with an ultrathin pseudomorphic layer of W, these provide a template for the fast combinatorial investigation of any growth or physical property d…
▽ More
We have developed and characterized the structure and composition of nanometers-thick solid-solution epitaxial layers of (V,Nb) on sapphire (1120), displaying a continuous lateral gradient of composition from one to another pure element. Further covered with an ultrathin pseudomorphic layer of W, these provide a template for the fast combinatorial investigation of any growth or physical property depending of strain.
△ Less
Submitted 25 January, 2011;
originally announced January 2011.
-
Tunable magnetic properties of arrays of Fe(110) nanowires grown on kinetically-grooved W(110) self-organized templates
Authors:
Bogdana Borca,
Olivier Fruchart,
Evaggelos Kritsikis,
Fabien Cheynis,
Anthony Rousseau,
Philippe David,
Claire Meyer,
Jean-Christophe Toussaint
Abstract:
We report a detailed magnetic study of a new type of self-organized nanowires disclosed briefly previously [B. Borca et al., Appl. Phys. Lett. 90, 142507 (2007)]. The templates, prepared on sapphire wafers in a kinetically-limited regime, consist of uniaxially-grooved W(110) surfaces, with a lateral period here tuned to 15nm. Fe deposition leads to the formation of (110) 7 nm-wide wires located…
▽ More
We report a detailed magnetic study of a new type of self-organized nanowires disclosed briefly previously [B. Borca et al., Appl. Phys. Lett. 90, 142507 (2007)]. The templates, prepared on sapphire wafers in a kinetically-limited regime, consist of uniaxially-grooved W(110) surfaces, with a lateral period here tuned to 15nm. Fe deposition leads to the formation of (110) 7 nm-wide wires located at the bottom of the grooves. The effect of capping layers (Mo, Pd, Au, Al) and underlayers (Mo, W) on the magnetic anisotropy of the wires was studied. Significant discrepancies with figures known for thin flat films are evidenced and discussed in terms of step anisotropy and strain-dependent surface anisotropy. Demagnetizing coeffcients of cylinders with a triangular isosceles cross-section have also been calculated, to estimate the contribution of dipolar anisotropy. Finally, the dependence of magnetic anisotropy with the interface element was used to tune the blocking temperature of the wires, here from 50K to 200 K.
△ Less
Submitted 8 June, 2009;
originally announced June 2009.
-
Kinetic self-organization of trenched templates for the fabrication of versatile ferromagnetic nanowires
Authors:
Bogdana Borca,
Olivier Fruchart,
Philippe David,
Anthony Rousseau,
Claire Meyer
Abstract:
We have self-organized versatile magnetic nanowires, ie with variable period and adjustable magnetic anisotropy energy (MAE). First, using the kinetic roughening of W(110) uniaxial templates of trenches were grown on commercial Sapphire wafers. Unlike most templates used for self-organization, those have a variable period, 4-12nm are demonstrated here. Fe deposition then results in the formation…
▽ More
We have self-organized versatile magnetic nanowires, ie with variable period and adjustable magnetic anisotropy energy (MAE). First, using the kinetic roughening of W(110) uniaxial templates of trenches were grown on commercial Sapphire wafers. Unlike most templates used for self-organization, those have a variable period, 4-12nm are demonstrated here. Fe deposition then results in the formation of wires in the trenches. The magnitude of MAE could be engineered up or down by changing the capping- or underlayer, in turn affecting the mean superparamagnetic temperature, raised to 175K so far.
△ Less
Submitted 14 January, 2007;
originally announced January 2007.
-
Model of horizontal stress in the Aigion10 well (Corinth) calculated from acoustic body waves
Authors:
André Rousseau
Abstract:
In this paper we try to deduce the in situ stresses from the monopole acoustic waves of the well AIG10 between 689 and 1004 meters in depth (Corinth Golf). This borehole crosses competent sedimentary formations (mainly limestone), and the active Aigion fault between 769 and 780 meters in depth. This study is the application of two methods previously described by the author who shows the relation…
▽ More
In this paper we try to deduce the in situ stresses from the monopole acoustic waves of the well AIG10 between 689 and 1004 meters in depth (Corinth Golf). This borehole crosses competent sedimentary formations (mainly limestone), and the active Aigion fault between 769 and 780 meters in depth. This study is the application of two methods previously described by the author who shows the relationships between in situ horizontal stresses, and (i) the presence or absence of double body waves, (ii) the amplitude ratios between S and P waves (Rousseau, 2005a,b). The full waveforms of this well exhibit two distinct domains separated by the Aigion fault. Within the upper area the three typical waves (P, S and Stoneley) may appear, but the S waves are not numerous, and there is no double body wave, whereas within the lower area there are sometimes double P waves, but no S waves. From those observations, we conclude that the stress domain is isotropic above the Aigion fault, and anisotropic below, which is consistent with conclusions drawn by authors from other kinds of data. The calculation applied to the characteristics of the double P waves suggests that this horizontal stress anisotropy is very high, up to 190 % with the maximum horizontal stress superior to 100 MPa and the minimum horizontal stress close to zero at 939 meters in depth. The amplitude ratios between the S and P wave indicate a very strong compression - which is isotropic - above the Aigion fault.
△ Less
Submitted 2 February, 2006;
originally announced February 2006.
-
Comparative study of P and S wave amplitudes of acoustic logging through solid formations : contribution to the knowledge of in situ stresses and fractures
Authors:
André Rousseau
Abstract:
In order to compare the ratios between the amplitudes of P and S acoustic waves drawn from various boreholes, we have defined a specific wave parameter called magnitude : for each shot, we have added the maximum positive amplitude values and the absolute values of the minimum negative amplitudes of a given wave recorded at different depths. In compact formations, the difference between the logar…
▽ More
In order to compare the ratios between the amplitudes of P and S acoustic waves drawn from various boreholes, we have defined a specific wave parameter called magnitude : for each shot, we have added the maximum positive amplitude values and the absolute values of the minimum negative amplitudes of a given wave recorded at different depths. In compact formations, the difference between the logarithms of the magnitudes of S and P waves provides a value that appears to be characteristic of the state of stress of the domain where a borehole is drilled. Accidents between those formations, such as fractures or sedimentary joints can be determined, and breakouts well distinguished.
△ Less
Submitted 5 July, 2005;
originally announced July 2005.
-
Is the San Andreas Fracture a bayonet-shaped fracture as inferred from the acoustic body waves in the SAFOD Pilot hole ?
Authors:
André Rousseau
Abstract:
The method using the propagation of acoustic body waves within the stress modified areas around a vertical borehole has been applied to the granitic formation penetrated by the SAFOD Pilot hole near the San Andreas Fault trace. This method allows us investigating the horizontal in situ stresses. Only P waves supplied useful and surprising information. A depth of 1270 m separates an upper region…
▽ More
The method using the propagation of acoustic body waves within the stress modified areas around a vertical borehole has been applied to the granitic formation penetrated by the SAFOD Pilot hole near the San Andreas Fault trace. This method allows us investigating the horizontal in situ stresses. Only P waves supplied useful and surprising information. A depth of 1270 m separates an upper region of uniform thickness of stress modified areas, possibly corresponding to a shear domain, and a lower region where there are simultaneously two values of the thicknesses of the stress modified areas (particularly between 1500 and 1600 m of depth) possibly corresponding to a compressive and a shear domain. In order to integrate the contradictory effects of the simultaneity of shear and compressive domains at some depths, as well as the presence of three shear zones at particular depths, we propose that the San Andreas Fault could be bayonet-shaped instead of planar. Other recent available information in the literature about this fault, such as the presence of a fault zone of low shear wave velocity, stress rotation measured with depth, and the large angles of the frictional coefficients, can be logically explained by this kind of fault geometry.
△ Less
Submitted 13 October, 2005; v1 submitted 23 March, 2005;
originally announced March 2005.
-
Relationship between acoustic body waves and in situ stresses around a borehole
Authors:
André Rousseau
Abstract:
This paper shows that there are three types of shape of acoustic body waves propagating inside competent and homogeneous formations penetrated by a borehole : simple, double, and resonant. This fact is connected to the modifications undergone by the area located around a well after drilling in relation to in situ state of stress. There are overstressed and understressed vertical cylindrical zone…
▽ More
This paper shows that there are three types of shape of acoustic body waves propagating inside competent and homogeneous formations penetrated by a borehole : simple, double, and resonant. This fact is connected to the modifications undergone by the area located around a well after drilling in relation to in situ state of stress. There are overstressed and understressed vertical cylindrical zones with "bubble-shaped" cross-sections, in which acoustic body waves are supposed to reflect. The horizontal size and the shape of the stress modified areas depend on the values of (K1+K2)/2 - with K1=SH/Sv (the overburden pressure) and K2=Sh/Sv -, that is to say on the in situ horizontal stress and the anisotropy of this stress. The calculation of the velocities of the P and S double waves allows us to evaluate the radial thicknesses of these stress modified areas. As their values are different according to whether they result from P or S waves, we propose an explanation based on their wavelengths. The comparisons with other works on the in situ stress of the studied boreholes allow us to propose a method for evaluating the horizontal stress and its anisotropy, thanks to the estimation of the value (K1+K2)/2.
△ Less
Submitted 17 March, 2005;
originally announced March 2005.
-
A New Global Theory of the Earth's Dynamics : a Single Cause Can Explain All the Geophysical and Geological Phenomena
Authors:
André Rousseau
Abstract:
After describing all the contradictions associated with the current Plate Tectonics theory, this paper proposes a model where a single cause can explain all geophysical and geological phenomena. The source of the Earth's activity lies in the difference of the angular velocities of the mantle and of the solid inner core. The friction between both spheres infers heat, which is the cause of the mel…
▽ More
After describing all the contradictions associated with the current Plate Tectonics theory, this paper proposes a model where a single cause can explain all geophysical and geological phenomena. The source of the Earth's activity lies in the difference of the angular velocities of the mantle and of the solid inner core. The friction between both spheres infers heat, which is the cause of the melted iron which constitutes most of the liquid outer core, as well as the source of the global heat flow. The solid inner core angular velocity is supposed to remain steady, while the mantle angular velocity depends on gyroscopic forces (involving acceleration) and slowing down due to external attractions and, principally the motions of mantle plates 2900 km thick. The variations of the geomagnetic field are therefore the direct consequence of the variations of the angular velocity of the mantle relative to that of the inner core. As a result, the biological and tectonic evolutions during geological times are due to those phenomena. So, the limits of eras coincide exactly with the passage to zero of the geomagnetic field. Here we show that cycles of about 230-250 millions years, which exhibit the correlation between the mantle angular velocity variations, the geomagnetic variations, and therefore the climate, allow us to predict future events : the current global warming which parallels the Earth's magnetic field decrease.
△ Less
Submitted 24 February, 2005;
originally announced February 2005.
-
Langmuir probe diagnostic studies of pulsed hydrogen plasmas in planar microwave reactors
Authors:
A. Rousseau,
E. Teboul,
N. Lang,
M. Hannemann,
J. Röpcke
Abstract:
Langmuir probe techniques have been used to study time and spatially resolved electron densities and electron temperatures in pulse-modulated hydrogen discharges in two different planar microwave reactors (fmicrowave= 2.45 GHz, tpulse= 1 ms). The reactors are (i) a standing-wave radiative slotted waveguide reactor and (ii) a modified travelling-wave radiative slotted waveguide reactor, which gen…
▽ More
Langmuir probe techniques have been used to study time and spatially resolved electron densities and electron temperatures in pulse-modulated hydrogen discharges in two different planar microwave reactors (fmicrowave= 2.45 GHz, tpulse= 1 ms). The reactors are (i) a standing-wave radiative slotted waveguide reactor and (ii) a modified travelling-wave radiative slotted waveguide reactor, which generate relatively large plasmas over areas from about 350 cm^2 to 500 cm^2. The plasma properties of these reactor types are of particular interest as they have been used for basic research and for plasma processing, e.g. for surface treatment and layer deposition. In the present study the pressures and microwave powers in the reactors were varied between 33 and 55 Pa and 600 and 3600 W, respectively. In regions with high electromagnetic fields shielded Langmuir probes were used to avoid disturbances of the probe characteristic. Close to the microwave windows of the reactors both the electron density and the electron temperature showed strong inhomogeneities. In the standing-wave reactor the inhomogeneity was found to be spatially modulated by the position of the slots. The maximum value of the electron temperature was about 10 eV and the electron density varied between 0.2 and 14*10^11 cm^-3. The steady state electron temperature in a discharge pulse was reached within a few tens of microseconds whereas the electron density needed some hundreds of microseconds to reach a steady state. Depending on the reactor the electron density reached a maximum between 80 and 200 microseconds after the beginning of the pulse.
△ Less
Submitted 13 June, 2002; v1 submitted 12 June, 2002;
originally announced June 2002.