-
Fast unconditional reset and leakage reduction in fixed-frequency transmon qubits
Authors:
Liangyu Chen,
Simon Pettersson Fors,
Zixian Yan,
Anaida Ali,
Tahereh Abad,
Amr Osman,
Eleftherios Moschandreou,
Benjamin Lienhard,
Sandoko Kosen,
Hang-Xi Li,
Daryoush Shiri,
Tong Liu,
Stefan Hill,
Abdullah-Al Amin,
Robert Rehammar,
Mamta Dahiya,
Andreas Nylander,
Marcus Rommel,
Anita Fadavi Roudsari,
Marco Caputo,
Grönberg Leif,
Joonas Govenius,
Miroslav Dobsicek,
Michele Faucci Giannelli,
Anton Frisk Kockum
, et al. (2 additional authors not shown)
Abstract:
The realization of fault-tolerant quantum computing requires the execution of quantum error-correction (QEC) schemes, to mitigate the fragile nature of qubits. In this context, to ensure the success of QEC, a protocol capable of implementing both qubit reset and leakage reduction is highly desirable. We demonstrate such a protocol in an architecture consisting of fixed-frequency transmon qubits pa…
▽ More
The realization of fault-tolerant quantum computing requires the execution of quantum error-correction (QEC) schemes, to mitigate the fragile nature of qubits. In this context, to ensure the success of QEC, a protocol capable of implementing both qubit reset and leakage reduction is highly desirable. We demonstrate such a protocol in an architecture consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers -- an architecture that is compatible with the surface code. We use tunable couplers to transfer any undesired qubit excitation to the readout resonator of the qubit, from which this excitation decays into the feedline. In total, the combination of qubit reset, leakage reduction, and coupler reset takes only 83ns to complete. Our reset scheme is fast, unconditional, and achieves fidelities well above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers. Our protocol also provides a means to both reduce QEC cycle runtime and improve algorithmic fidelity on quantum computers.
△ Less
Submitted 7 October, 2024; v1 submitted 25 September, 2024;
originally announced September 2024.
-
A small footprint travelling-wave parametric amplifier with a high Signal-to-Noise Ratio improvement in a wide band
Authors:
Hampus Renberg Nilsson,
Liangyu Chen,
Giovanna Tancredi,
Robert Rehammar,
Daryoush Shiri,
Filip Nilsson,
Amr Osman,
Vitaly Shumeiko,
Per Delsing
Abstract:
We characterise a small footprint travelling-wave parametric amplifier (TWPA). The TWPA is built with magnetically flux-tunable superconducting nonlinear asymmetric inductive elements (SNAILs) and parallel-plate capacitors. It implements three-wave mixing (3WM) with resonant phase matching (RPM), a small cutoff frequency for high gain per unitcell and impedance matching networks for large bandwidt…
▽ More
We characterise a small footprint travelling-wave parametric amplifier (TWPA). The TWPA is built with magnetically flux-tunable superconducting nonlinear asymmetric inductive elements (SNAILs) and parallel-plate capacitors. It implements three-wave mixing (3WM) with resonant phase matching (RPM), a small cutoff frequency for high gain per unitcell and impedance matching networks for large bandwidth impedance matching. The device has 200 unitcells and a physical footprint of only 1.1 mm^2, yet demonstrates an average parametric gain of 19 dB over a 3 GHz bandwidth, an average effective signal-to-noise ratio improvement of 10 dB and a clear speedup of qubit readout time.
△ Less
Submitted 29 August, 2024;
originally announced August 2024.
-
Direct detection of quasiparticle tunneling with a charge-sensitive superconducting sensor coupled to a waveguide
Authors:
Kazi Rafsanjani Amin,
Axel M. Eriksson,
Mikael Kervinen,
Linus Andersson,
Robert Rehammar,
Simone Gasparinetti
Abstract:
Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate…
▽ More
Detecting quasiparticle tunneling events in superconducting circuits provides information about the population and dynamics of non-equilibrium quasiparticles. Such events can be detected by monitoring changes in the frequency of an offset-charge-sensitive superconducting qubit. This monitoring has so far been performed by Ramsey interferometry assisted by a readout resonator. Here, we demonstrate a quasiparticle detector based on a superconducting qubit directly coupled to a waveguide. We directly measure quasiparticle number parity on the qubit island by probing the coherent scattering of a microwave tone, offering simplicity of operation, fast detection speed, and a large signal-to-noise ratio. We observe tunneling rates between 0.8 and $7~\rm{s}^{-1}$, depending on the average occupation of the detector qubit, and achieve a temporal resolution below $10~μ\rm{s}$ without a quantum-limited amplifier. Our simple and efficient detector lowers the barrier to perform studies of quasiparticle population and dynamics, facilitating progress in fundamental science, quantum information processing, and sensing.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Signal crosstalk in a flip-chip quantum processor
Authors:
Sandoko Kosen,
Hang-Xi Li,
Marcus Rommel,
Robert Rehammar,
Marco Caputo,
Leif Grönberg,
Jorge Fernández-Pendás,
Anton Frisk Kockum,
Janka Biznárová,
Liangyu Chen,
Christian Križan,
Andreas Nylander,
Amr Osman,
Anita Fadavi Roudsari,
Daryoush Shiri,
Giovanna Tancredi,
Joonas Govenius,
Jonas Bylander
Abstract:
Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk…
▽ More
Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk performance competitive with those reported in other platforms. For capacitively coupled qubit-drive lines, we find on-resonant crosstalk better than -27 dB (average -37 dB). For inductively coupled magnetic-flux-drive lines, we find less than 0.13 % direct-current flux crosstalk (average 0.05 %). These observed crosstalk levels are adequately small and indicate a decreasing trend with increasing distance, which is promising for further scaling up to larger numbers of qubits. We discuss the implication of our results for the design of a low-crosstalk, on-chip signal delivery architecture, including the influence of a shielding tunnel structure, potential sources of crosstalk, and estimation of crosstalk-induced qubit-gate error in scaled-up quantum processors.
△ Less
Submitted 12 September, 2024; v1 submitted 1 March, 2024;
originally announced March 2024.
-
Peripheral circuits for ideal performance of a travelling-wave parametric amplifier
Authors:
Hampus Renberg Nilsson,
Daryoush Shiri,
Robert Rehammar,
Anita Fadavi Roudsari,
Per Delsing
Abstract:
We investigate the required peripheral circuits to enable ideal performance for a high-gain travelling-wave parametric amplifier (TWPA) based on three-wave mixing (3WM). By embedding the TWPA in a network of superconducting diplexers, hybrid couplers and impedance matching networks, the amplifier can deliver a high stable gain with near-quantum-limited noise performance, with suppressed gain rippl…
▽ More
We investigate the required peripheral circuits to enable ideal performance for a high-gain travelling-wave parametric amplifier (TWPA) based on three-wave mixing (3WM). By embedding the TWPA in a network of superconducting diplexers, hybrid couplers and impedance matching networks, the amplifier can deliver a high stable gain with near-quantum-limited noise performance, with suppressed gain ripples, while eliminating the reflections of the signal, the idler and the pump as well as the transmission of all unwanted tones. We also demonstrate a configuration where the amplifier can isolate. We call this technique Wideband Idler Filtering (WIF). The theory is supported by simulations that predict over 20 dB gain in the 4-8 GHz band with 10 dB isolation for a single amplifier and 30 dB isolation for two cascaded amplifiers. We demonstrate how the WIF-TWPAs can be used to construct controllable isolators with over 40 dB isolation over the full 4-8 GHz band.
△ Less
Submitted 30 January, 2024; v1 submitted 18 October, 2023;
originally announced October 2023.
-
Experimentally verified, fast analytic and numerical design of superconducting resonators in flip-chip architectures
Authors:
Hang-Xi Li,
Daryoush Shiri,
Sandoko Kosen,
Marcus Rommel,
Lert Chayanun,
Andreas Nylander,
Robert Rehammar,
Giovanna Tancredi,
Marco Caputo,
Kestutis Grigoras,
Leif Grönberg,
Joonas Govenius,
Jonas Bylander
Abstract:
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to p…
▽ More
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to predict a resonator's parameters directly from its 2D cross-section, without computationally heavy and time-consuming 3D simulation. We demonstrate the method's validity by comparing the calculated resonator frequency and coupling quality factor with those obtained through 3D finite-element-method simulation and by measurement of 15 resonators in a flip-chip-integrated architecture. We achieve a discrepancy of less than 2% between designed and measured frequencies, for 6-GHz resonators. We also propose a design method that reduces the sensitivity of the resonant frequency to variations in the inter-chip spacing.
△ Less
Submitted 30 August, 2023; v1 submitted 9 May, 2023;
originally announced May 2023.
-
Low-pass filter with ultra-wide stopband for quantum computing applications
Authors:
Robert Rehammar,
Simone Gasparinetti
Abstract:
A new type of low-pass filter based on a leaky coaxial waveguide is presented. The filter has minimal insertion loss in the pass band, while at the same time high attenuation in the stop band is achieved. Thanks to its arrangement, the filter does not present parasitic leakage paths, so that, unlike conventional resonant filters, the stop band extends to very high frequencies. It is shown that a p…
▽ More
A new type of low-pass filter based on a leaky coaxial waveguide is presented. The filter has minimal insertion loss in the pass band, while at the same time high attenuation in the stop band is achieved. Thanks to its arrangement, the filter does not present parasitic leakage paths, so that, unlike conventional resonant filters, the stop band extends to very high frequencies. It is shown that a particular stop-band attenuation can be obtained by adding or removing leaking sections. Coupling between the center coaxial structure and the leaking holes is investigated. A prototype is manufactured and scattering parameters are measured up to 145 GHz. The prototype shows an insertion loss of less than 0.15 dB up to 10 GHz and an attenuation in excess of 60 dB above 70 GHz. The proposed filter is suitable for superconducting quantum computing applications where qubits are sensitive to radiation with energy high enough to break Cooper-pairs, thereby destroying superconductivity.
△ Less
Submitted 8 May, 2022;
originally announced May 2022.
-
Optical properties of carbon nanofiber photonic crystals
Authors:
R. Rehammar,
R. Magnusson,
A. I. Fernandez-Dominguez,
H. Arwin,
J. M. Kinaret,
S. A. Maier,
E. E. B. Campbell
Abstract:
Carbon nanofibers (CNF) are used as components of planar photonic crystals. Square and rectangular lattices and random patterns of vertically aligned CNF were fabricated and their properties studied using ellipsometry. We show that detailed information such as symmetry directions and the band structure of these novel materials can be extracted from considerations of the polarization state in the s…
▽ More
Carbon nanofibers (CNF) are used as components of planar photonic crystals. Square and rectangular lattices and random patterns of vertically aligned CNF were fabricated and their properties studied using ellipsometry. We show that detailed information such as symmetry directions and the band structure of these novel materials can be extracted from considerations of the polarization state in the specular beam. The refractive index of the individual nanofibers was found to be n_CNF = 4.1.
△ Less
Submitted 17 November, 2010; v1 submitted 7 January, 2010;
originally announced January 2010.