-
Analysis of Neural Video Compression Networks for 360-Degree Video Coding
Authors:
Andy Regensky,
Fabian Brand,
André Kaup
Abstract:
With the increasing efforts of bringing high-quality virtual reality technologies into the market, efficient 360-degree video compression gains in importance. As such, the state-of-the-art H.266/VVC video coding standard integrates dedicated tools for 360-degree video, and considerable efforts have been put into designing 360-degree projection formats with improved compression efficiency. For the…
▽ More
With the increasing efforts of bringing high-quality virtual reality technologies into the market, efficient 360-degree video compression gains in importance. As such, the state-of-the-art H.266/VVC video coding standard integrates dedicated tools for 360-degree video, and considerable efforts have been put into designing 360-degree projection formats with improved compression efficiency. For the fast-evolving field of neural video compression networks (NVCs), the effects of different 360-degree projection formats on the overall compression performance have not yet been investigated. It is thus unclear, whether a resampling from the conventional equirectangular projection (ERP) to other projection formats yields similar gains for NVCs as for hybrid video codecs, and which formats perform best. In this paper, we analyze several generations of NVCs and an extensive set of 360-degree projection formats with respect to their compression performance for 360-degree video. Based on our analysis, we find that projection format resampling yields significant improvements in compression performance also for NVCs. The adjusted cubemap projection (ACP) and equatorial cylindrical projection (ECP) show to perform best and achieve rate savings of more than 55% compared to ERP based on WS-PSNR for the most recent NVC. Remarkably, the observed rate savings are higher than for H.266/VVC, emphasizing the importance of projection format resampling for NVCs.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Geometry-Corrected Geodesic Motion Modeling with Per-Frame Camera Motion for 360-Degree Video Compression
Authors:
Andy Regensky,
André Kaup
Abstract:
The large amounts of data associated with 360-degree video require highly effective compression techniques for efficient storage and distribution. The development of improved motion models for 360-degree motion compensation has shown significant improvements in compression efficiency. A geodesic motion model representing translational camera motion proved to be one of the most effective models. In…
▽ More
The large amounts of data associated with 360-degree video require highly effective compression techniques for efficient storage and distribution. The development of improved motion models for 360-degree motion compensation has shown significant improvements in compression efficiency. A geodesic motion model representing translational camera motion proved to be one of the most effective models. In this paper, we propose an improved geometry-corrected geodesic motion model that outperforms the state of the art at reduced complexity. We additionally propose the transmission of per-frame camera motion information, where prior work assumed the same camera motion for all frames of a sequence. Our approach yields average Bjøntegaard Delta rate savings of 2.27% over H.266/VVC, outperforming the original geodesic motion model by 0.32 percentage points at reduced computational complexity.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Processing Energy Modeling for Neural Network Based Image Compression
Authors:
Christian Herglotz,
Fabian Brand,
Andy Regensky,
Felix Rievel,
André Kaup
Abstract:
Nowadays, the compression performance of neural-networkbased image compression algorithms outperforms state-of-the-art compression approaches such as JPEG or HEIC-based image compression. Unfortunately, most neural-network based compression methods are executed on GPUs and consume a high amount of energy during execution. Therefore, this paper performs an in-depth analysis on the energy consumptio…
▽ More
Nowadays, the compression performance of neural-networkbased image compression algorithms outperforms state-of-the-art compression approaches such as JPEG or HEIC-based image compression. Unfortunately, most neural-network based compression methods are executed on GPUs and consume a high amount of energy during execution. Therefore, this paper performs an in-depth analysis on the energy consumption of state-of-the-art neural-network based compression methods on a GPU and show that the energy consumption of compression networks can be estimated using the image size with mean estimation errors of less than 7%. Finally, using a correlation analysis, we find that the number of operations per pixel is the main driving force for energy consumption and deduce that the network layers up to the second downsampling step are consuming most energy.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
Motion Plane Adaptive Motion Modeling for Spherical Video Coding in H.266/VVC
Authors:
Andy Regensky,
Christian Herglotz,
André Kaup
Abstract:
Motion compensation is one of the key technologies enabling the high compression efficiency of modern video coding standards. To allow compression of spherical video content, special mapping functions are required to project the video to the 2D image plane. Distortions inevitably occurring in these mappings impair the performance of classical motion models. In this paper, we propose a novel motion…
▽ More
Motion compensation is one of the key technologies enabling the high compression efficiency of modern video coding standards. To allow compression of spherical video content, special mapping functions are required to project the video to the 2D image plane. Distortions inevitably occurring in these mappings impair the performance of classical motion models. In this paper, we propose a novel motion plane adaptive motion modeling technique (MPA) for spherical video that allows to perform motion compensation on different motion planes in 3D space instead of having to work on the - in theory arbitrarily mapped - 2D image representation directly. The integration of MPA into the state-of-the-art H.266/VVC video coding standard shows average Bjøntegaard Delta rate savings of 1.72\% with a peak of 3.37\% based on PSNR and 1.55\% with a peak of 2.92\% based on WS-PSNR compared to VTM-14.2.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
Improving Spherical Image Resampling through Viewport-Adaptivity
Authors:
Andy Regensky,
Viktoria Heimann,
Ruoyu Zhang,
André Kaup
Abstract:
The conversion between different spherical image and video projection formats requires highly accurate resampling techniques in order to minimize the inevitable loss of information. Suitable resampling algorithms such as nearest neighbor, linear or cubic resampling are readily available. However, no generally applicable resampling technique exploits the special properties of spherical images so fa…
▽ More
The conversion between different spherical image and video projection formats requires highly accurate resampling techniques in order to minimize the inevitable loss of information. Suitable resampling algorithms such as nearest neighbor, linear or cubic resampling are readily available. However, no generally applicable resampling technique exploits the special properties of spherical images so far. Thus, we propose a novel viewport-adaptive resampling (VAR) technique that takes the spherical characteristics of the underlying resampling problem into account. VAR can be applied to any mesh-to-mesh capable resampling algorithm and shows significant gains across all tested techniques. In combination with frequency-selective resampling, VAR outperforms conventional cubic resampling by more than 2 dB in terms of WS-PSNR. A visual inspection and the evaluation of further metrics such as PSNR and SSIM support the positive results.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
The Bjøntegaard Bible -- Why your Way of Comparing Video Codecs May Be Wrong
Authors:
Christian Herglotz,
Hannah Och,
Anna Meyer,
Geetha Ramasubbu,
Lena Eichermüller,
Matthias Kränzler,
Fabian Brand,
Kristian Fischer,
Dat Thanh Nguyen,
Andy Regensky,
André Kaup
Abstract:
In this paper, we provide an in-depth assessment on the Bjøntegaard Delta. We construct a large data set of video compression performance comparisons using a diverse set of metrics including PSNR, VMAF, bitrate, and processing energies. These metrics are evaluated for visual data types such as classic perspective video, 360$^\circ$ video, point clouds, and screen content. As compression technology…
▽ More
In this paper, we provide an in-depth assessment on the Bjøntegaard Delta. We construct a large data set of video compression performance comparisons using a diverse set of metrics including PSNR, VMAF, bitrate, and processing energies. These metrics are evaluated for visual data types such as classic perspective video, 360$^\circ$ video, point clouds, and screen content. As compression technology, we consider multiple hybrid video codecs as well as state-of-the-art neural network based compression methods. Using additional supporting points inbetween standard points defined by parameters such as the quantization parameter, we assess the interpolation error of the Bjøntegaard-Delta (BD) calculus and its impact on the final BD value. From the analysis, we find that the BD calculus is most accurate in the standard application of rate-distortion comparisons with mean errors below 0.5 percentage points. For other applications and special cases, e.g., VMAF quality, energy considerations, or inter-codec comparisons, the errors are higher (up to 5 percentage points), but can be halved by using a higher number of supporting points. We finally come up with recommendations on how to use the BD calculus such that the validity of the resulting BD-values is maximized. Main recommendations are as follows: First, relative curve differences should be plotted and analyzed. Second, the logarithmic domain should be used for saturating metrics such as SSIM and VMAF. Third, BD values below a certain threshold indicated by the subset error should not be used to draw recommendations. Fourth, using two supporting points is sufficient to obtain rough performance estimates.
△ Less
Submitted 22 December, 2023; v1 submitted 25 April, 2023;
originally announced April 2023.
-
Fast Reconstruction of Three-Quarter Sampling Measurements Using Recurrent Local Joint Sparse Deconvolution and Extrapolation
Authors:
Simon Grosche,
Andy Regensky,
Alexander Sinn,
Jürgen Seiler,
André Kaup
Abstract:
Recently, non-regular three-quarter sampling has shown to deliver an increased image quality of image sensors by using differently oriented L-shaped pixels compared to the same number of square pixels. A three-quarter sampling sensor can be understood as a conventional low-resolution sensor where one quadrant of each square pixel is opaque. Subsequent to the measurement, the data can be reconstruc…
▽ More
Recently, non-regular three-quarter sampling has shown to deliver an increased image quality of image sensors by using differently oriented L-shaped pixels compared to the same number of square pixels. A three-quarter sampling sensor can be understood as a conventional low-resolution sensor where one quadrant of each square pixel is opaque. Subsequent to the measurement, the data can be reconstructed on a regular grid with twice the resolution in both spatial dimensions using an appropriate reconstruction algorithm. For this reconstruction, local joint sparse deconvolution and extrapolation (L-JSDE) has shown to perform very well. As a disadvantage, L-JSDE requires long computation times of several dozen minutes per megapixel. In this paper, we propose a faster version of L-JSDE called recurrent L-JSDE (RL-JSDE) which is a reformulation of L-JSDE. For reasonable recurrent measurement patterns, RL-JSDE provides significant speedups on both CPU and GPU without sacrificing image quality. Compared to L-JSDE, 20-fold and 733-fold speedups are achieved on CPU and GPU, respectively.
△ Less
Submitted 5 May, 2022;
originally announced May 2022.
-
Real-Time Frequency Selective Reconstruction through Register-Based Argmax Calculation
Authors:
Andy Regensky,
Simon Grosche,
Jürgen Seiler,
André Kaup
Abstract:
Frequency Selective Reconstruction (FSR) is a state-of-the-art algorithm for solving diverse image reconstruction tasks, where a subset of pixel values in the image is missing. However, it entails a high computational complexity due to its iterative, blockwise procedure to reconstruct the missing pixel values. Although the complexity of FSR can be considerably decreased by performing its computati…
▽ More
Frequency Selective Reconstruction (FSR) is a state-of-the-art algorithm for solving diverse image reconstruction tasks, where a subset of pixel values in the image is missing. However, it entails a high computational complexity due to its iterative, blockwise procedure to reconstruct the missing pixel values. Although the complexity of FSR can be considerably decreased by performing its computations in the frequency domain, the reconstruction procedure still takes multiple seconds up to multiple minutes depending on the parameterization. However, FSR has the potential for a massive parallelization greatly improving its reconstruction time. In this paper, we introduce a novel highly parallelized formulation of FSR adapted to the capabilities of modern GPUs and propose a considerably accelerated calculation of the inherent argmax calculation. Altogether, we achieve a 100-fold speed-up, which enables the usage of FSR for real-time applications.
△ Less
Submitted 28 February, 2022;
originally announced February 2022.
-
A Novel Viewport-Adaptive Motion Compensation Technique for Fisheye Video
Authors:
Andy Regensky,
Christian Herglotz,
André Kaup
Abstract:
Although fisheye cameras are in high demand in many application areas due to their large field of view, many image and video signal processing tasks such as motion compensation suffer from the introduced strong radial distortions. A recently proposed projection-based approach takes the fisheye projection into account to improve fisheye motion compensation. However, the approach does not consider t…
▽ More
Although fisheye cameras are in high demand in many application areas due to their large field of view, many image and video signal processing tasks such as motion compensation suffer from the introduced strong radial distortions. A recently proposed projection-based approach takes the fisheye projection into account to improve fisheye motion compensation. However, the approach does not consider the large field of view of fisheye lenses that requires the consideration of different motion planes in 3D space. We propose a novel viewport-adaptive motion compensation technique that applies the motion vectors in different perspective viewports in order to realize these motion planes. Thereby, some pixels are mapped to so-called virtual image planes and require special treatment to obtain reliable mappings between the perspective viewports and the original fisheye image. While the state-of-the-art ultra wide-angle compensation is sufficiently accurate, we propose a virtual image plane compensation that leads to perfect mappings. All in all, we achieve average gains of +2.40 dB in terms of PSNR compared to the state of the art in fisheye motion compensation.
△ Less
Submitted 28 February, 2022;
originally announced February 2022.
-
Motion-Plane-Adaptive Inter Prediction in 360-Degree Video Coding
Authors:
Andy Regensky,
Christian Herglotz,
André Kaup
Abstract:
Inter prediction is one of the key technologies enabling the high compression efficiency of modern video coding standards. 360-degree video needs to be mapped to the 2D image plane prior to coding in order to allow compression using existing video coding standards. The distortions that inevitably occur when mapping spherical data onto the 2D image plane, however, impair the performance of classica…
▽ More
Inter prediction is one of the key technologies enabling the high compression efficiency of modern video coding standards. 360-degree video needs to be mapped to the 2D image plane prior to coding in order to allow compression using existing video coding standards. The distortions that inevitably occur when mapping spherical data onto the 2D image plane, however, impair the performance of classical inter prediction techniques. In this paper, we propose a motion-plane-adaptive inter prediction technique (MPA) for 360-degree video that takes the spherical characteristics of 360-degree video into account. Based on the known projection format of the video, MPA allows to perform inter prediction on different motion planes in 3D space instead of having to work on the - in theory arbitrarily mapped - 2D image representation directly. We furthermore derive a motion-plane-adaptive motion vector prediction technique (MPA-MVP) that allows to translate motion information between different motion planes and motion models. Our proposed integration of MPA together with MPA-MVP into the state-of-the-art H.266/VVC video coding standard shows significant Bjontegaard Delta rate savings of 1.72% with a peak of 3.97% based on PSNR and 1.56% with a peak of 3.40% based on WS-PSNR compared to the VTM-14.2 baseline on average.
△ Less
Submitted 11 July, 2022; v1 submitted 7 February, 2022;
originally announced February 2022.
-
Image Super-Resolution Using T-Tetromino Pixels
Authors:
Simon Grosche,
Andy Regensky,
Jürgen Seiler,
André Kaup
Abstract:
For modern high-resolution imaging sensors, pixel binning is performed in low-lighting conditions and in case high frame rates are required. To recover the original spatial resolution, single-image super-resolution techniques can be applied for upscaling. To achieve a higher image quality after upscaling, we propose a novel binning concept using tetromino-shaped pixels. It is embedded into the fie…
▽ More
For modern high-resolution imaging sensors, pixel binning is performed in low-lighting conditions and in case high frame rates are required. To recover the original spatial resolution, single-image super-resolution techniques can be applied for upscaling. To achieve a higher image quality after upscaling, we propose a novel binning concept using tetromino-shaped pixels. It is embedded into the field of compressed sensing and the coherence is calculated to motivate the sensor layouts used. Next, we investigate the reconstruction quality using tetromino pixels for the first time in literature. Instead of using different types of tetrominoes as proposed elsewhere, we show that using a small repeating cell consisting of only four T-tetrominoes is sufficient. For reconstruction, we use a locally fully connected reconstruction (LFCR) network as well as two classical reconstruction methods from the field of compressed sensing. Using the LFCR network in combination with the proposed tetromino layout, we achieve superior image quality in terms of PSNR, SSIM, and visually compared to conventional single-image super-resolution using the very deep super-resolution (VDSR) network. For PSNR, a gain of up to \SI[retain-explicit-plus]{+1.92}{dB} is achieved.
△ Less
Submitted 22 March, 2023; v1 submitted 17 November, 2021;
originally announced November 2021.