-
Drawing a better understanding of flood quantiles from a bag
Authors:
Christine Poulard,
Renard Benjamin,
Gonzalez-Sosa Enrique,
Caillouet Laurie
Abstract:
The "100-year flood" is commonly used, for instance in newspapers, but flood hazard assessment is more complex than it seems. We first describe an animation entitled "bag of floods" to make flood quantiles more concrete, using marbles whose colour corresponds to a class of return period. Discussing the analogies and differences between drawing a marble from the bag and the next annual flood make i…
▽ More
The "100-year flood" is commonly used, for instance in newspapers, but flood hazard assessment is more complex than it seems. We first describe an animation entitled "bag of floods" to make flood quantiles more concrete, using marbles whose colour corresponds to a class of return period. Discussing the analogies and differences between drawing a marble from the bag and the next annual flood make it easier to explain that flood hazard assessment (i) must not be focussed on the "100-yr flood", (ii) is often expressed as a probability over one given year, but for planning it should be estimated over a much longer duration (like successive draws from the bag) and (iii) variability is significant and matters. Scripts allowing to simulate long series of draws confirm that empirical probabilities get close to theoretical probabilities, but also illustrate less intuitive results : on average one quarter of 100 successive draws, contains two floods or more with a discharge exceeding the "100-yr discharge". To go further, Sample2Gumbel is a teaching tool drawing annual maxima discharges. It compares on a graph (i) a "real distribution", coded in the script and used to draw a sample, (ii) the sample expressed with respect to "plotting position", expressed as a return period but which is in fact a crude estimation to allow plotting, (iii) the distribution fitted on the sample. This demo tool illustrates the variability of different tries, with samples of the same length, and shows how uncertainty evolves with the sample size. To improve it, more distributions could be included, and damage estimation could be added.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Debonding of a soft adhesive fibril in contact with an elastomeric pillar
Authors:
Aymeric Duigou-Majumdar,
Pierre-Philippe Cortet,
Christophe Poulard
Abstract:
The debonding criterion of fibrils of soft adhesive materials is a key element regarding the quantitative modelisation of pressure sensitive adhesive tapes peeling energy. We present in this article an experimental study of the detachment of a commercial acrylic adhesive tape from the top surface of a single micrometric pillar of PDMS elastomer. During an experiment, the pillar and the adhesive, a…
▽ More
The debonding criterion of fibrils of soft adhesive materials is a key element regarding the quantitative modelisation of pressure sensitive adhesive tapes peeling energy. We present in this article an experimental study of the detachment of a commercial acrylic adhesive tape from the top surface of a single micrometric pillar of PDMS elastomer. During an experiment, the pillar and the adhesive, after being put in contact, are separated at a constant displacement rate, resulting in the formation, the elongation and the final detachment of a fibril of adhesive material. A systematic study allows us to uncover power laws for the maximum force and the critical elongation of the fibril at debonding as a function of the diameter of the cylindrical pillar which controls the diameter of the fibril. The scaling law evidenced for the critical elongation appears as a first step toward the understanding of the debonding criterion of fibrils of soft adhesive materials. In addition, viscoelastic digitation at the triple debonding line is observed during detachment for large pillar diameters. The wavelength and penetration length of the fingers that we report appear to be consistent with existing models based on pure elastic mechanical response.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
Evaporation of liquid coating a fiber
Authors:
Marie Corpart,
Julien Dervaux,
Christophe Poulard,
Frédéric Restagno,
François Boulogne
Abstract:
We investigate theoretically and numerically the diffusion-limited evaporation of a liquid deposited on a fiber in two configurations: a sleeve and a axisymmetric barrel-shaped droplet. For a sleeve, the local flux depends on both the aspect ratio and the smallest length of the problem. By using analytical calculations and 3D finite elements simulations, we predict a divergence of this flux furthe…
▽ More
We investigate theoretically and numerically the diffusion-limited evaporation of a liquid deposited on a fiber in two configurations: a sleeve and a axisymmetric barrel-shaped droplet. For a sleeve, the local flux depends on both the aspect ratio and the smallest length of the problem. By using analytical calculations and 3D finite elements simulations, we predict a divergence of this flux further localized at the edge as the aspect ratio increases. The evaporation of axisymmetric drops on a fiber is studied with numerical simulations. For sufficiently large volumes, we evidence that the evaporation rate is almost independent of the wetting properties of the liquid, even for small contact angles, and that the droplets evaporate as spheres of the same volume.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Effect of the density of pillar-patterned substrates on the contact mechanics: Transition from top to mixed contact with a detailed pressure-field description
Authors:
Rene Ledesma-Alonso,
Elie Raphael,
Frederic Restagno,
Christophe Poulard
Abstract:
Different contact regimes between a spherical lens and a periodically patterned substrate are observed, when they are pressed against each other. Top contact occurs when only the highest substrate sections touch the lens, whereas mixed contact implies that both the highest and the lowest substrate sections come into contact with the lens. In this paper, we study how the pattern density of the subs…
▽ More
Different contact regimes between a spherical lens and a periodically patterned substrate are observed, when they are pressed against each other. Top contact occurs when only the highest substrate sections touch the lens, whereas mixed contact implies that both the highest and the lowest substrate sections come into contact with the lens. In this paper, we study how the pattern density of the substrate, along with its physical properties and those of the lens, determine the transition from top contact to mixed contact. Experiments and numerical simulations had been performed, as complementary approaches to obtain data, and a theoretical analysis has been developed to gain insight on the effect of the physical parameters on the contact transition. As a result, a phase diagram is presented, in terms of the load and the contact radius, that combines the observations of the three approaches (experimental, numerical, and theoretical), unveiling the boundaries of three contact regimes: (1) deterministic-driven contact, (2) top contact, and (3) mixed contact.
△ Less
Submitted 25 November, 2021; v1 submitted 23 July, 2021;
originally announced July 2021.
-
Nonlinear amplification of adhesion forces in interleaved books
Authors:
Raphaelle Taub,
Thomas Salez,
Hector Alarcon,
Elie Raphael,
Christophe Poulard,
Frédéric Restagno
Abstract:
Two interleaved phonebooks are nearly impossible to separate by pulling their spines. The very slight force exerted by the outer sheets of the assembly is amplified as the exponential of the square of the number of sheets, leading to a highly-resistant system even with a small number of sheets. We present a systematic and detailed study of the influences of the normal external force and the geomet…
▽ More
Two interleaved phonebooks are nearly impossible to separate by pulling their spines. The very slight force exerted by the outer sheets of the assembly is amplified as the exponential of the square of the number of sheets, leading to a highly-resistant system even with a small number of sheets. We present a systematic and detailed study of the influences of the normal external force and the geometrical parameters of the booklets on the assembly strength. We conclude that the paper-paper adhesion force between the two outer sheets, on the order of a few mN, is the one that is amplified by the two interleaved system. The two-phonebooks experiment that has attracted the attention of students and non-scientific public all around the world as an outstanding demonstration of the strength of friction appears to be as well a spectacular macroscopic manifestation of the microscopic friction-adhesion coupling.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
Skinny emulsions take on granular matter
Authors:
Anaïs Giustiniani,
Simon Weis,
Christophe Poulard,
Paul H. Kamm,
Francisco García-Moreno,
Matthias Schröter,
Wiebke Drenckhan
Abstract:
Our understanding of the structural features of foams and emulsions has advanced significantly over the last 20 years. However, with a search for "super-stable" liquid dispersions, foam and emulsion science employs increasingly complex formulations which create solid-like visco-elastic layers at the bubble/drop surfaces. These lead to elastic, adhesive and frictional forces between bubbles/drops,…
▽ More
Our understanding of the structural features of foams and emulsions has advanced significantly over the last 20 years. However, with a search for "super-stable" liquid dispersions, foam and emulsion science employs increasingly complex formulations which create solid-like visco-elastic layers at the bubble/drop surfaces. These lead to elastic, adhesive and frictional forces between bubbles/drops, impacting strongly how they pack and deform against each other, asking for an adaptation of the currently available structural description. The possibility to modify systematically the interfacial properties makes these dispersions ideal systems for the exploration of soft granular materials with complex interactions.
We present here a first systematic analysis of the structural features of such a system using a model silicone emulsion containing millimetre-sized polyethylene glycol drops (PEG). Solid-like drop surfaces are obtained by polymeric cross-linking reactions at the PEG-silicone interface. Using a novel droplet-micromanipulator, we highlight the presence of elastic, adhesive and frictional interactions between two drops. We then provide for the first time a full tomographic analysis of the structural features of these emulsions. An in-depth analysis of the angle of repose, local volume fraction distributions, pair correlation functions and the drop deformations for different skin formulations allow us to put in evidence the striking difference with "ordinary" emulsions having fluid-like drop surfaces. While strong analogies with frictional hard-sphere systems can be drawn, these systems display a set of unique features due to the high deformability of the drops which await systematic exploration.
△ Less
Submitted 18 September, 2018;
originally announced September 2018.
-
Water-based peeling of thin hydrophobic films
Authors:
Sepideh Khodaparast,
François Boulogne,
Christophe Poulard,
Howard A. Stone
Abstract:
Inks of permanent markers and water-proof cosmetics create elastic thin films upon application on a surface. Such adhesive materials are deliberately designed to exhibit water-repellent behavior. Therefore, patterns made up of these inks become resistant to moisture and cannot be cleaned by water after drying. However, we show that sufficiently slow dipping of such elastic films, which are adhered…
▽ More
Inks of permanent markers and water-proof cosmetics create elastic thin films upon application on a surface. Such adhesive materials are deliberately designed to exhibit water-repellent behavior. Therefore, patterns made up of these inks become resistant to moisture and cannot be cleaned by water after drying. However, we show that sufficiently slow dipping of such elastic films, which are adhered to a substrate, into a bath of pure water allows complete removal of the hydrophobic coatings. Upon dipping, the air-water interface in the bath forms a contact line on the substrate, which exerts a capillary-induced peeling force at the edge of the hydrophobic thin film. We highlight that this capillary peeling process is more effective at lower velocities of the air-liquid interface and lower viscosities. Capillary peeling not only removes such thin films from the substrate but also transfers them flawlessly onto the air-water interface.
△ Less
Submitted 1 September, 2017;
originally announced September 2017.
-
Interfacial tension of reactive, liquid interfaces and its consequences
Authors:
Anaïs Giustiniani,
Wiebke Drenckhan,
Christophe Poulard
Abstract:
Dispersions of immiscible liquids, such as emulsions and polymer blends, are at the core of many industrial applications which makes the understanding of their properties (morphology, stability, etc.) of great interest. A wide range of these properties depend on interfacial phenomena, whose understanding is therefore of particular importance. The behaviour of interfacial tension in emulsions and p…
▽ More
Dispersions of immiscible liquids, such as emulsions and polymer blends, are at the core of many industrial applications which makes the understanding of their properties (morphology, stability, etc.) of great interest. A wide range of these properties depend on interfacial phenomena, whose understanding is therefore of particular importance. The behaviour of interfacial tension in emulsions and polymer blends is well-understood -both theoretically and experimentally -in the case of non-reactive stabilization processes using pre-made surfactants. However, this description of the interfacial tension behaviour in reactive systems, where the stabilizing agents are created in-situ (and which is more efficient as a stabilization route for many systems), does not yet find a consensus amongst the community. In this review, we compare the different theories which have been developed for non-reactive and for reactive systems, and we discuss their ability to capture the behaviour found experimentally. Finally, we address the consequences of the reactive stabilization process both on the global emulsions or polymer blend morphologies and at the interfacial scale.
△ Less
Submitted 9 August, 2017;
originally announced August 2017.
-
Protocol to perform pressurized blister tests on thin elastic films
Authors:
François Boulogne,
Sepideh Khodaparast,
Christophe Poulard,
Howard A. Stone
Abstract:
This work aims to identify common challenges in the preparation of the blister test devices designed for measurement of energy release rate for brittle thin films and to propose easy-to-implement solutions accordingly. To this end, we provide a step-by-step guide for fabricating a blister test device comprised of thin polystyrene films adhered to glass substrates. Thin films are first transferred…
▽ More
This work aims to identify common challenges in the preparation of the blister test devices designed for measurement of energy release rate for brittle thin films and to propose easy-to-implement solutions accordingly. To this end, we provide a step-by-step guide for fabricating a blister test device comprised of thin polystyrene films adhered to glass substrates. Thin films are first transferred from donor substrates to an air-water interface, which is then used as a platform to locate them on a receiver substrate. We embed a microchannel at the back of the device to evacuate the air trapped in the opening, through which the pressure is applied. We quantify the height and the radius of the blister to estimate the adhesion energy using the available expressions correlating the normal force and the moment with the shape of the blister. The present blister test provided adhesion energy per unit area of $G = 18 \pm 2$ $ \mbox{mJ}/{\mbox m}^2$ for polystyrene on glass, which is in good agreement with the measurement of $G = 14 \pm 2$ $ \mbox{mJ}/{\mbox m}^2$ found in our independent cleavage test.
△ Less
Submitted 7 June, 2017;
originally announced June 2017.
-
Stable freestanding thin films of copolymer melts far from the glass transition
Authors:
Thibaut Gaillard,
Wiebke Drenckhan,
Christophe Poulard,
Thomas Voisin,
Clément Honorez,
Patrick Davidson,
Matthieu Roché
Abstract:
Thin polymer films have attracted attention because of both their broad range of applications and of the fundamental questions they raise regarding the dynamic response of confined polymers. These films are unstable if the temperature is above their glass transition temperature Tg. Here, we describe freestanding thin films of centimetric dimensions made of a comb copolymer melt far from its glass…
▽ More
Thin polymer films have attracted attention because of both their broad range of applications and of the fundamental questions they raise regarding the dynamic response of confined polymers. These films are unstable if the temperature is above their glass transition temperature Tg. Here, we describe freestanding thin films of centimetric dimensions made of a comb copolymer melt far from its glass transition that are stable for more than a day. These long lifetimes allowed us to characterize the drainage dynamics and the thickness profile of the films. Stratified regions appear as the film drains. We have evidence that the stability, thinning dynamics and thickness profile of the films result from structural forces in the melt. Understanding the key mechanisms behind our observations may lead to new developments in polymeric thin films, foams and emulsions without the use of stabilizing agents.
△ Less
Submitted 23 November, 2016;
originally announced November 2016.
-
Generation of silicone poly-HIPES with controlled pore sizes via reactive emulsion stabilization
Authors:
Anaïs Giustiniani,
Philippe Guégan,
Manon Marchand,
Christophe Poulard,
Wiebke Drenckhan
Abstract:
Macrocellular silicone polymers are obtained after solidification of the continuous phase of a PDMS (polydimethylsiloxane) emulsion, which contains PEG (polyethylene glycol) drops of sub-millimetric dimensions. Coalescence of the liquid template emulsion is prohibited by a reactive blending approach. We investigate in detail the relationship between the interfacial properties and the emulsion stab…
▽ More
Macrocellular silicone polymers are obtained after solidification of the continuous phase of a PDMS (polydimethylsiloxane) emulsion, which contains PEG (polyethylene glycol) drops of sub-millimetric dimensions. Coalescence of the liquid template emulsion is prohibited by a reactive blending approach. We investigate in detail the relationship between the interfacial properties and the emulsion stability, and we use micro- and millifluidic techniques to generation macro-cellular polymers with controlled structural properties over a wider range of cell-sizes (0.2-2mm) and volume fractions of the continuous phase (0.1-40%). This approach could easily be transferred to a wide range of polymeric systems.
△ Less
Submitted 20 October, 2016;
originally announced October 2016.
-
Stress concentration in periodically rough hertzian contact: Hertz to soft-flat-punch transition
Authors:
Rene Ledesma-Alonso,
Elie Raphael,
Liliane Leger,
Frederic Restagno,
Christophe Poulard
Abstract:
We report on the elastic contact between a spherical lens and a patterned substrate, composed of an hexagonal lattice of cylindrical pillars. The stress field and the size of the contact area are obtained by means of numerical methods (discrete Green's function superposition and iterative bisection-like methods). For small indentations, a transition from a Hertzian to a Boussinesq-Cerruti-like beh…
▽ More
We report on the elastic contact between a spherical lens and a patterned substrate, composed of an hexagonal lattice of cylindrical pillars. The stress field and the size of the contact area are obtained by means of numerical methods (discrete Green's function superposition and iterative bisection-like methods). For small indentations, a transition from a Hertzian to a Boussinesq-Cerruti-like behavior is observed when the surface fraction of the substrate that is covered by pillars is increased. In particular, we present a master curve defined by two dimensionless parameters, which allows to predict the stress at the center of contact region in terms of the surface fraction occupied by pillars. The transition between the limiting contact regimes, Hertzian and Boussinesq-Cerruti-like, is well described by a rational function. Additionally, a simple model to describe the Boussines-Cerruti-like contact between the lens and a single elastic pillar, which takes into account the pillar geometry and the elastic properties of the two bodies, is presented.
△ Less
Submitted 1 July, 2016; v1 submitted 1 April, 2016;
originally announced April 2016.
-
Self-amplification of solid friction in interleaved assemblies
Authors:
Hector Alarcon,
Thomas Salez,
Christophe Poulard,
Jean-Francis Bloch,
Elie Raphael,
Kari Dalnoki-Veress,
Frederic Restagno
Abstract:
It is nearly impossible to separate two interleaved phonebooks when held by their spines. A full understanding of this astonishing demonstration of solid friction in complex assemblies has remained elusive. In this Letter, we report on experiments with controlled booklets and show that the force required increases sharply with the number of sheets. A model captures the effect of the number of shee…
▽ More
It is nearly impossible to separate two interleaved phonebooks when held by their spines. A full understanding of this astonishing demonstration of solid friction in complex assemblies has remained elusive. In this Letter, we report on experiments with controlled booklets and show that the force required increases sharply with the number of sheets. A model captures the effect of the number of sheets, their thickness and the overlapping distance. Furthermore, the data collapse onto a self-similar master curve with one dimensionless amplification parameter. In addition to solving a long-standing familiar enigma, this model system provides a framework with which one can accurately measure friction forces and coefficients at low loads, and that has relevance to complex assemblies from the macro to the nanoscale.
△ Less
Submitted 17 December, 2015; v1 submitted 13 August, 2015;
originally announced August 2015.
-
Transition from Cassie to Wenzel state in patterned soft elastomer sliding contacts
Authors:
Élise Degrandi-Contraires,
Christophe Poulard,
Frédéric Restagno,
Raphaël Weil,
Liliane Léger
Abstract:
In this paper, we presented an experimental and theoretical analysis of the formation of the contact between a smooth elastomer lens and an elastomer substrate micropatterned with hexagonal arrays of cylindrical pillars. We show using a JKR model coupled with a full description of the deformation of the substrate between the pillars that the transition between the top to the full contact is obtain…
▽ More
In this paper, we presented an experimental and theoretical analysis of the formation of the contact between a smooth elastomer lens and an elastomer substrate micropatterned with hexagonal arrays of cylindrical pillars. We show using a JKR model coupled with a full description of the deformation of the substrate between the pillars that the transition between the top to the full contact is obtain when the normal load is increased above a well predicted threshold. We have also shown that above the onset of full contact, the evolution of the area of full contact was obeying a simple scaling.
△ Less
Submitted 9 January, 2012;
originally announced January 2012.
-
Mechanical tunning of adhesion through micro-patterning of elastic surfaces
Authors:
Christophe Poulard,
Frédéric Restagno,
Raphaël Weil,
Liliane Léger
Abstract:
We present an investigation of the role of micropatterning on adhesion properties at soft deformable polydimethylsiloxane (PDMS)/ acrylic adhesive interfaces. Contrary to what has been observed for low aspect ratio rigid patterns, where the adhesion enhancement was found to only result from the increase of interfacial area due to patterning, we show that for soft elastic arrays of cylindrical pill…
▽ More
We present an investigation of the role of micropatterning on adhesion properties at soft deformable polydimethylsiloxane (PDMS)/ acrylic adhesive interfaces. Contrary to what has been observed for low aspect ratio rigid patterns, where the adhesion enhancement was found to only result from the increase of interfacial area due to patterning, we show that for soft elastic arrays of cylindrical pillars, the elastic deformation of the patterns can lead to noticeable extra adhesion increase. The effect of the geometrical characteristics of the patterning for hexagonal arrays of PDMS micropillars on the adhesion energy are presented. We show that varying the size of the pattern allows one to tune the adhesion energy, and that this adhesion enhancement saturates when the pillars become too close to each other, due a coupling of the elastic deformation fields inside the underlying substrate. A mechanical model has been developed and found in good quantitative agreement with experimental data, with as unique fitting parameter the rupture criteria for the adhesive on the top of the pillars. Such a rupture a rupture criteria can thus be extracted from systematic experiments on controlled patterned surfaces. This criteria remain sensitive to the chemistry of the surfaces.
△ Less
Submitted 27 September, 2010;
originally announced September 2010.
-
Multiple-length-scale elastic instability mimics parametric resonance of nonlinear oscillators
Authors:
Fabian Brau,
Hugues Vandeparre,
Abbas Sabbah,
Christophe Poulard,
Arezki Boudaoud,
Pascal Damman
Abstract:
Spatially confined rigid membranes reorganize their morphology in response to the imposed constraints. A crumpled elastic sheet presents a complex pattern of random folds focusing the deformation energy while compressing a membrane resting on a soft foundation creates a regular pattern of sinusoidal wrinkles with a broad distribution of energy. Here, we study the energy distribution for highly con…
▽ More
Spatially confined rigid membranes reorganize their morphology in response to the imposed constraints. A crumpled elastic sheet presents a complex pattern of random folds focusing the deformation energy while compressing a membrane resting on a soft foundation creates a regular pattern of sinusoidal wrinkles with a broad distribution of energy. Here, we study the energy distribution for highly confined membranes and show the emergence of a new morphological instability triggered by a period-doubling bifurcation. A periodic self-organized focalization of the deformation energy is observed provided an up-down symmetry breaking, induced by the intrinsic nonlinearity of the elasticity equations, occurs. The physical model, exhibiting an analogy with parametric resonance in nonlinear oscillator, is a new theoretical toolkit to understand the morphology of various confined systems, such as coated materials or living tissues, e.g., wrinkled skin, internal structure of lungs, internal elastica of an artery, brain convolutions or formation of fingerprints. Moreover, it opens the way to new kind of microfabrication design of multiperiodic or chaotic (aperiodic) surface topography via self-organization.
△ Less
Submitted 11 June, 2010;
originally announced June 2010.
-
Slippery or sticky ! Control of wrinkling patterns by selective adhesion
Authors:
Hugues Vandeparre,
Julien Léopoldès,
Christophe Poulard,
Sylvain Desprez,
Gwennaelle Derue,
Cyprien Gay,
Pascal Damman
Abstract:
Wrinkling patterns at the metallized surface of thin polymer films are shown to be sensitive to the sticky or slippery character of the polymer/substrate interface (titanium coating, polystyrene film and coated silicon substrate). Selective prefered wrinkle orientation and amplitude are achieved. Existing theoretical models are expanded to specific boundary conditions (adhesive vs slippery) and…
▽ More
Wrinkling patterns at the metallized surface of thin polymer films are shown to be sensitive to the sticky or slippery character of the polymer/substrate interface (titanium coating, polystyrene film and coated silicon substrate). Selective prefered wrinkle orientation and amplitude are achieved. Existing theoretical models are expanded to specific boundary conditions (adhesive vs slippery) and rationalize these observations.
△ Less
Submitted 28 June, 2007;
originally announced June 2007.
-
Evaporating Drops of Alkane Mixtures
Authors:
Geoffroy Guéna,
Christophe Poulard,
Anne-Marie Cazabat
Abstract:
Alkane mixtures are model systems where the influence of surface tension gradients during the spreading and the evaporation of wetting drops can be easily studied. The surface tension gradients are mainly induced by concentration gradients, mass diffusion being a stabilising process. Depending on the relative concentration of the mixture, a rich pattern of behaviours is obtained.
Alkane mixtures are model systems where the influence of surface tension gradients during the spreading and the evaporation of wetting drops can be easily studied. The surface tension gradients are mainly induced by concentration gradients, mass diffusion being a stabilising process. Depending on the relative concentration of the mixture, a rich pattern of behaviours is obtained.
△ Less
Submitted 4 December, 2005;
originally announced December 2005.
-
Rescaling the dynamics of evaporating drops
Authors:
Christophe Poulard,
Geoffroy Guéna,
Anne-Marie Cazabat,
A. Boudaoud,
M. Ben Amar
Abstract:
The dynamics of evaporation of wetting droplets has been investigated experimentally in an extended range of drop sizes, in order to provide trends relevant for a theoretical analysis. A model is proposed, which generalises Tanner's law, allowing us to smooth out the singularities both in dissipation and in evaporative flux at the moving contact line. A qualitative agreement is obtained, which r…
▽ More
The dynamics of evaporation of wetting droplets has been investigated experimentally in an extended range of drop sizes, in order to provide trends relevant for a theoretical analysis. A model is proposed, which generalises Tanner's law, allowing us to smooth out the singularities both in dissipation and in evaporative flux at the moving contact line. A qualitative agreement is obtained, which represents a first step towards the solution of a very old, complex problem.
△ Less
Submitted 26 May, 2005;
originally announced May 2005.