-
Enhanced control of single-molecule emission frequency and spectral diffusion
Authors:
Rocco Duquennoy,
Simon Landrieux,
Daniele De Bernardis,
Juergen Mony,
Maja Colautti,
Lin Jin,
Wolfram H. P. Pernice,
Costanza Toninelli
Abstract:
The Stark effect provides a powerful method to shift the spectra of molecules, atoms and electronic transitions in general, becoming one of the simplest and most straightforward way to tune the frequency of quantum emitters by means of a static electric field. At the same time, in order to reduce the emitter sensitivity to charge noise, inversion symmetric systems are typically designed, providing…
▽ More
The Stark effect provides a powerful method to shift the spectra of molecules, atoms and electronic transitions in general, becoming one of the simplest and most straightforward way to tune the frequency of quantum emitters by means of a static electric field. At the same time, in order to reduce the emitter sensitivity to charge noise, inversion symmetric systems are typically designed, providing a stable emission frequency, with a quadratic-only dependence on the applied field. However, such nonlinear behaviour might reflect in correlations between the tuning ability and unwanted spectral fluctuations. Here, we provide experimental evidence of this trend, using molecular quantum emitters in the solid state cooled down to liquid helium temperatures. We finally combine the electric field generated by electrodes, which results parallel to the molecule induced dipole, to optically excite long-lived charge states, acting in the perpendicular direction. Based on the anisotropy of the molecule's polarizability, our two-dimensional control of the local electric field allows not only to tune the emitter's frequency but also to sensibly suppress the spectral instabilities associated to field fluctuations.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
Emergent self-adaptation in an integrated photonic neural network for backpropagation-free learning
Authors:
Alessio Lugnan,
Samarth Aggarwal,
Frank Brückerhoff-Plückelmann,
C. David Wright,
Wolfram H. P. Pernice,
Harish Bhaskaran,
Peter Bienstman
Abstract:
Plastic self-adaptation, nonlinear recurrent dynamics and multi-scale memory are desired features in hardware implementations of neural networks, because they enable them to learn, adapt and process information similarly to the way biological brains do. In this work, we experimentally demonstrate these properties occurring in arrays of photonic neurons. Importantly, this is realised autonomously i…
▽ More
Plastic self-adaptation, nonlinear recurrent dynamics and multi-scale memory are desired features in hardware implementations of neural networks, because they enable them to learn, adapt and process information similarly to the way biological brains do. In this work, we experimentally demonstrate these properties occurring in arrays of photonic neurons. Importantly, this is realised autonomously in an emergent fashion, without the need for an external controller setting weights and without explicit feedback of a global reward signal. Using a hierarchy of such arrays coupled to a backpropagation-free training algorithm based on simple logistic regression, we are able to achieve a performance of 98.2% on the MNIST task, a popular benchmark task looking at classification of written digits. The plastic nodes consist of silicon photonics microring resonators covered by a patch of phase-change material that implements nonvolatile memory. The system is compact, robust, and straightforward to scale up through the use of multiple wavelengths. Moreover, it constitutes a unique platform to test and efficiently implement biologically plausible learning schemes at a high processing speed.
△ Less
Submitted 6 December, 2023;
originally announced December 2023.
-
Controlling all Degrees of Freedom of the Optical Coupling in Hybrid Quantum Photonics
Authors:
Niklas Lettner,
Lukas Antoniuk,
Anna P. Ovvyan,
Helge Gehring,
Daniel Wendland,
Viatcheslav N. Agafonov,
Wolfram H. P. Pernice,
Alexander Kubanek
Abstract:
Nanophotonic quantum devices can significantly boost light-matter interaction which is important for applications such as quantum networks. Reaching a high interaction strength between an optical transition of a spin system and a single mode of light is an essential step which demands precise control over all degrees of freedom of the optical coupling. While current devices have reached a high acc…
▽ More
Nanophotonic quantum devices can significantly boost light-matter interaction which is important for applications such as quantum networks. Reaching a high interaction strength between an optical transition of a spin system and a single mode of light is an essential step which demands precise control over all degrees of freedom of the optical coupling. While current devices have reached a high accuracy of emitter positioning, the placement process remains overall statistically, reducing the device fabrication yield. Furthermore, not all degrees of freedom of the optical coupling can be controlled limiting the device performance. Here, we develop a hybrid approach based on negatively-charged silicon-vacancy center in nanodiamonds coupled to a mode of a Si$_3$N$_4$-photonic crystal cavity, where all terms of the coupling strength can be controlled individually. We use the frequency of coherent Rabi-oscillations and line-broadening as a measure of the device performance. This allows for iterative optimization of the position and the rotation of the dipole with respect to individual, preselected modes of light. Therefore, our work marks an important step for optimization of hybrid quantum photonics and enables to align device simulations with real device performance.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
All-Optical Spin Initialization via a Cavity Broadened Optical Transition in On-Chip Hybrid Quantum Photonics
Authors:
Lukas Antoniuk,
Niklas Lettner,
Anna P. Ovvyan,
Simon Haugg,
Marco Klotz,
Helge Gehring,
Daniel Wendland,
Viatcheslav N. Agafonov,
Wolfram H. P. Pernice,
Alexander Kubanek
Abstract:
Hybrid quantum photonic systems connect classical photonics to the quantum world and promise to deliver efficient light-matter quantum interfaces while leveraging the advantages of both, the classical and the quantum, subsystems. However, combining efficient, scalable photonics and solid state quantum systems with desirable optical and spin properties remains a formidable challenge. In particular…
▽ More
Hybrid quantum photonic systems connect classical photonics to the quantum world and promise to deliver efficient light-matter quantum interfaces while leveraging the advantages of both, the classical and the quantum, subsystems. However, combining efficient, scalable photonics and solid state quantum systems with desirable optical and spin properties remains a formidable challenge. In particular the access to individual spin states and coherent mapping to photons remains unsolved for these systems. In this letter, we demonstrate all-optical initialization and readout of the electronic spin of a negatively-charged silicon-vacancy center in a nanodiamond coupled to a silicon nitride photonic crystal cavity. We characterize relevant parameters of the coupled emitter-cavity system and determine the silicon-vacancy center's spin-relaxation and spin-decoherence rate. Our results mark an important step towards the realization of a hybrid spin-photon interface based on silicon nitride photonics and the silicon-vacancy center's electron spin in nanodiamonds with potential use for quantum networks, quantum communication and distributed quantum computation.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
Scalable and efficient grating couplers on low-index photonic platforms enabled by cryogenic deep silicon etching
Authors:
Emma Lomonte,
Maik Stappers,
Linus Krämer,
Wolfram H. P. Pernice,
Francesco Lenzini
Abstract:
Efficient fiber-to-chip couplers for multi-port access to photonic integrated circuits are paramount for a broad class of applications, ranging, e.g., from telecommunication to photonic computing and quantum technologies. While grating-based approaches are convenient for out-of-plane access and often desirable from a packaging point of view, on low-index photonic platforms, such as silicon nitride…
▽ More
Efficient fiber-to-chip couplers for multi-port access to photonic integrated circuits are paramount for a broad class of applications, ranging, e.g., from telecommunication to photonic computing and quantum technologies. While grating-based approaches are convenient for out-of-plane access and often desirable from a packaging point of view, on low-index photonic platforms, such as silicon nitride or thin-film lithium niobate, the limited grating strength has thus far hindered the achievement of coupling efficiencies comparable to the ones attainable in silicon photonics. Here we present a flexible strategy for the realization of highly efficient grating couplers on low-index photonic platforms. To simultaneously reach a high scattering efficiency and a near-unitary modal overlap with optical fibers, we make use of self-imaging gratings designed with a negative diffraction angle. To ensure high directionality of the diffracted light, we take advantage of a metal back-reflector patterned underneath the grating structure by cryogenic deep reactive ion etching of the silicon handle. Using silicon nitride as a testbed material, we experimentally demonstrate coupling efficiency up to -0.55 dB in the telecom C-band with near unity chip-scale device yield.
△ Less
Submitted 24 April, 2023;
originally announced May 2023.
-
In-memory photonic dot-product engine with electrically programmable weight banks
Authors:
Wen Zhou,
Bowei Dong,
Nikolaos Farmakidis,
Xuan Li,
Nathan Youngblood,
Kairan Huang,
Yuhan He,
C. David Wright,
Wolfram H. P. Pernice,
Harish Bhaskaran
Abstract:
Electronically reprogrammable photonic circuits based on phase-change chalcogenides present an avenue to resolve the von-Neumann bottleneck; however, implementation of such hybrid photonic-electronic processing has not achieved computational success. Here, we achieve this milestone by demonstrating an in-memory photonic-electronic dot-product engine, one that decouples electronic programming of ph…
▽ More
Electronically reprogrammable photonic circuits based on phase-change chalcogenides present an avenue to resolve the von-Neumann bottleneck; however, implementation of such hybrid photonic-electronic processing has not achieved computational success. Here, we achieve this milestone by demonstrating an in-memory photonic-electronic dot-product engine, one that decouples electronic programming of phase-change materials (PCMs) and photonic computation. Specifically, we develop non-volatile electronically reprogrammable PCM memory cells with a record-high 4-bit weight encoding, the lowest energy consumption per unit modulation depth (1.7 nJ per dB) for Erase operation (crystallization), and a high switching contrast (158.5%) using non-resonant silicon-on-insulator waveguide microheater devices. This enables us to perform parallel multiplications for image processing with a superior contrast-to-noise ratio (greater than 87.36) that leads to an enhanced computing accuracy (standard deviation less than 0.007). An in-memory hybrid computing system is developed in hardware for convolutional processing for recognizing images from the MNIST database with inferencing accuracies of 86% and 87%.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
High-speed thin-film lithium niobate quantum processor driven by a solid-state quantum emitter
Authors:
Patrik I. Sund,
Emma Lomonte,
Stefano Paesani,
Ying Wang,
Jacques Carolan,
Nikolai Bart,
Andreas D. Wieck,
Arne Ludwig,
Leonardo Midolo,
Wolfram H. P. Pernice,
Peter Lodahl,
Francesco Lenzini
Abstract:
Scalable photonic quantum computing architectures pose stringent requirements on photonic processing devices. The need for low-loss high-speed reconfigurable circuits and near-deterministic resource state generators are some of the most challenging requirements. Here we develop an integrated photonic platform based on thin-film lithium niobate and interface it with deterministic solid-state single…
▽ More
Scalable photonic quantum computing architectures pose stringent requirements on photonic processing devices. The need for low-loss high-speed reconfigurable circuits and near-deterministic resource state generators are some of the most challenging requirements. Here we develop an integrated photonic platform based on thin-film lithium niobate and interface it with deterministic solid-state single-photon sources based on quantum dots in nanophotonic waveguides. The generated photons are processed with low-loss circuits programmable at speeds of several GHz. We realize a variety of key photonic quantum information processing functionalities with the high-speed circuits, including on-chip quantum interference, photon demultiplexing, and reprogrammability of a four-mode universal photonic circuit. These results show a promising path forward for scalable photonic quantum technologies by merging integrated photonics with solid-state deterministic photon sources in a heterogeneous approach to scaling up.
△ Less
Submitted 10 November, 2022;
originally announced November 2022.
-
Hybrid Quantum Nanophotonics: Interfacing Color Center in Nanodiamonds with Si3N4-Photonics
Authors:
Alexander Kubanek,
Anna P. Ovvyan,
Lukas Antoniuk,
Niklas Lettner,
Wolfram H. P. Pernice
Abstract:
This chapter covers recent developments in the field of hybrid quantum photonics based on color centers in nanodiamonds and Si3N4-photonics towards a technology platform with applications in quantum information processing and quantum information distribution. The methodological approach can be divided in three main tasks. First, the fabrication and optimization of Si3N4-photonics. Second, the crea…
▽ More
This chapter covers recent developments in the field of hybrid quantum photonics based on color centers in nanodiamonds and Si3N4-photonics towards a technology platform with applications in quantum information processing and quantum information distribution. The methodological approach can be divided in three main tasks. First, the fabrication and optimization of Si3N4-photonics. Second, the creation, characterization and control of color centers in nanodiamonds. Third, the assembly of hybrid quantum photonics by integrating the nanodiamonds into the photonic structures. One focus will be the efficient interfacing of the color centers done by optimizing the optical coupling. The chapter describes recent progress in all three steps and summarizes the established hybrid platform. We believe, that the hybrid approach provides a promising path to realize quantum photonic applications, such as quantum networks or quantum repeaters, in the near future.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Scaling waveguide-integrated superconducting nanowire single-photon detector solutions to large numbers of independent optical channels
Authors:
Matthias Häußler,
Robin Terhaar,
Martin A. Wolff,
Helge Gehring,
Fabian Beutel,
Wladick Hartmann,
Nicolai Walter,
Max Tillmann,
Mahdi Ahangarianabhari,
Michael Wahl,
Tino Röhlicke,
Hans-Jürgen Rahn,
Wolfram H. P. Pernice,
Carsten Schuck
Abstract:
Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here we show how a scalable number of waveguide-integr…
▽ More
Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art photon counting performance with up to 60 % system detection efficiency and down to 26.0 ps timing accuracy for individually addressable detectors. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing and imaging applications.
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
Ultrafast quantum key distribution using fully parallelized quantum channels
Authors:
Robin Terhaar,
Jasper Rödiger,
Matthias Häußler,
Michael Wahl,
Helge Gehring,
Martin A. Wolff,
Fabian Beutel,
Wladick Hartmann,
Nicolai Walter,
Jonas Hanke,
Peter Hanne,
Nino Walenta,
Maximilian Diedrich,
Nicolas Perlot,
Max Tillmann,
Tino Röhlicke,
Mahdi Ahangarianabhari,
Carsten Schuck,
Wolfram H. P. Pernice
Abstract:
The field of quantum information processing offers secure communication protected by the laws of quantum mechanics and is on the verge of finding wider application for information transfer of sensitive data. To overcome the obstacle of inadequate cost-efficiency, extensive research is being done on the many components required for high data throughput using quantum key distribution (QKD). Aiming f…
▽ More
The field of quantum information processing offers secure communication protected by the laws of quantum mechanics and is on the verge of finding wider application for information transfer of sensitive data. To overcome the obstacle of inadequate cost-efficiency, extensive research is being done on the many components required for high data throughput using quantum key distribution (QKD). Aiming for an application-oriented solution, we report on the realization of a multichannel QKD system for plug-and-play high-bandwidth secure communication at telecom wavelength. For this purpose, a rack-sized multichannel superconducting nanowire single photon detector (SNSPD) system, as well as a highly parallelized time-correlated single photon counting (TCSPC) unit have been developed and linked to an FPGA-controlled QKD evaluation setup allowing for continuous operation and achieving high secret key rates using a coherent-one-way protocol.
△ Less
Submitted 19 July, 2022; v1 submitted 15 July, 2022;
originally announced July 2022.
-
2022 Roadmap on Neuromorphic Computing and Engineering
Authors:
Dennis V. Christensen,
Regina Dittmann,
Bernabé Linares-Barranco,
Abu Sebastian,
Manuel Le Gallo,
Andrea Redaelli,
Stefan Slesazeck,
Thomas Mikolajick,
Sabina Spiga,
Stephan Menzel,
Ilia Valov,
Gianluca Milano,
Carlo Ricciardi,
Shi-Jun Liang,
Feng Miao,
Mario Lanza,
Tyler J. Quill,
Scott T. Keene,
Alberto Salleo,
Julie Grollier,
Danijela Marković,
Alice Mizrahi,
Peng Yao,
J. Joshua Yang,
Giacomo Indiveri
, et al. (34 additional authors not shown)
Abstract:
Modern computation based on the von Neumann architecture is today a mature cutting-edge science. In the Von Neumann architecture, processing and memory units are implemented as separate blocks interchanging data intensively and continuously. This data transfer is responsible for a large part of the power consumption. The next generation computer technology is expected to solve problems at the exas…
▽ More
Modern computation based on the von Neumann architecture is today a mature cutting-edge science. In the Von Neumann architecture, processing and memory units are implemented as separate blocks interchanging data intensively and continuously. This data transfer is responsible for a large part of the power consumption. The next generation computer technology is expected to solve problems at the exascale with 1018 calculations each second. Even though these future computers will be incredibly powerful, if they are based on von Neumann type architectures, they will consume between 20 and 30 megawatts of power and will not have intrinsic physically built-in capabilities to learn or deal with complex data as our brain does. These needs can be addressed by neuromorphic computing systems which are inspired by the biological concepts of the human brain. This new generation of computers has the potential to be used for the storage and processing of large amounts of digital information with much lower power consumption than conventional processors. Among their potential future applications, an important niche is moving the control from data centers to edge devices.
The aim of this Roadmap is to present a snapshot of the present state of neuromorphic technology and provide an opinion on the challenges and opportunities that the future holds in the major areas of neuromorphic technology, namely materials, devices, neuromorphic circuits, neuromorphic algorithms, applications, and ethics. The Roadmap is a collection of perspectives where leading researchers in the neuromorphic community provide their own view about the current state and the future challenges. We hope that this Roadmap will be a useful resource to readers outside this field, for those who are just entering the field, and for those who are well established in the neuromorphic community.
https://doi.org/10.1088/2634-4386/ac4a83
△ Less
Submitted 13 January, 2022; v1 submitted 12 May, 2021;
originally announced May 2021.
-
Single photon emission from individual nanophotonic-integrated colloidal quantum dots
Authors:
Alexander Eich,
Tobias C. Spiekermann,
Helge Gehring,
Lisa Sommer,
Julian R. Bankwitz,
Philip P. J. Schrinner,
Johann A. Preuß,
Steffen Michaelis de Vasconcellos,
Rudolf Bratschitsch,
Wolfram H. P. Pernice,
Carsten Schuck
Abstract:
Solution processible colloidal quantum dots hold great promise for realizing single-photon sources embedded into scalable quantum technology platforms. However, the high-yield integration of large numbers of individually addressable colloidal quantum dots in a photonic circuit has remained an outstanding challenge. Here, we report on integrating individual colloidal core-shell quantum dots (CQDs)…
▽ More
Solution processible colloidal quantum dots hold great promise for realizing single-photon sources embedded into scalable quantum technology platforms. However, the high-yield integration of large numbers of individually addressable colloidal quantum dots in a photonic circuit has remained an outstanding challenge. Here, we report on integrating individual colloidal core-shell quantum dots (CQDs) into a nanophotonic network that allows for excitation and efficient collection of single-photons via separate waveguide channels. An iterative electron beam lithography process provides a viable method to position single emitters at predefined positions in a photonic integrated circuit with yield that approaches unity. Our work moves beyond the bulk optic paradigm of confocal microscopy and paves the way for supplying chip-scale quantum networks with single photons from large numbers of simultaneously controllable quantum emitters.
△ Less
Submitted 13 January, 2022; v1 submitted 23 April, 2021;
originally announced April 2021.
-
Efficient self-imaging grating couplers on a Lithium-Niobate-On-Insulator platform at near-visible and telecom wavelengths
Authors:
Emma Lomonte,
Francesco Lenzini,
Wolfram H. P. Pernice
Abstract:
Lithium-Niobate-On-Insulator (LNOI) has emerged as a promising platform in the field of integrated photonics. Nonlinear optical processes and fast electro-optic modulation have been reported with outstanding performance in ultra-low loss waveguides. In order to harness the advantages offered by the LNOI technology, suitable fiber-to-chip interconnects operating at different wavelength ranges are d…
▽ More
Lithium-Niobate-On-Insulator (LNOI) has emerged as a promising platform in the field of integrated photonics. Nonlinear optical processes and fast electro-optic modulation have been reported with outstanding performance in ultra-low loss waveguides. In order to harness the advantages offered by the LNOI technology, suitable fiber-to-chip interconnects operating at different wavelength ranges are demanded. Here we present easily manufacturable, self-imaging apodized grating couplers, featuring a coupling efficiency of the TE0 mode as high as $\simeq 47.1\%$ at $λ$=1550 nm and $\simeq 44.9\%$ at $λ$=775 nm. Our approach avoids the use of any metal back-reflector for an improved directivity or multi-layer structures for an enhanced grating strength.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
Single-photon detection and cryogenic reconfigurability in Lithium Niobate nanophotonic circuits
Authors:
Emma Lomonte,
Martin A. Wolff,
Fabian Beutel,
Simone Ferrari,
Carsten Schuck,
Wolfram H. P. Pernice,
Francesco Lenzini
Abstract:
Lithium-Niobate-On-Insulator (LNOI) is emerging as a promising platform for integrated quantum photonic technologies because of its high second-order nonlinearity and compact waveguide footprint. Importantly, LNOI allows for creating electro-optically reconfigurable circuits, which can be efficiently operated at cryogenic temperature. Their integration with superconducting nanowire single-photon d…
▽ More
Lithium-Niobate-On-Insulator (LNOI) is emerging as a promising platform for integrated quantum photonic technologies because of its high second-order nonlinearity and compact waveguide footprint. Importantly, LNOI allows for creating electro-optically reconfigurable circuits, which can be efficiently operated at cryogenic temperature. Their integration with superconducting nanowire single-photon detectors (SNSPDs) paves the way for realizing scalable photonic devices for active manipulation and detection of quantum states of light. Here we report the first demonstration of these two key components integrated in a low loss (0.2 dB/cm) LNOI waveguide network. As an experimental showcase of our technology, we demonstrate the combined operation of an electrically tunable Mach-Zehnder interferometer and two waveguide-integrated SNSPDs at its outputs. We show static reconfigurability of our system with a bias-drift-free operation over a time of 12 hours, as well as high-speed modulation at a frequency up to 1 GHz. Our results provide blueprints for implementing complex quantum photonic devices on the LNOI platform.
△ Less
Submitted 25 November, 2021; v1 submitted 19 March, 2021;
originally announced March 2021.
-
All-optical spiking neurosynaptic networks with self-learning capabilities
Authors:
J. Feldmann,
N. Youngblood,
C. D. Wright,
H. Bhaskaran,
W. H. P. Pernice
Abstract:
Software-implementation, via neural networks, of brain-inspired computing approaches underlie many important modern-day computational tasks, from image processing to speech recognition, artificial intelligence and deep learning applications. Yet, differing from real neural tissue, traditional computing architectures physically separate the core computing functions of memory and processing, making…
▽ More
Software-implementation, via neural networks, of brain-inspired computing approaches underlie many important modern-day computational tasks, from image processing to speech recognition, artificial intelligence and deep learning applications. Yet, differing from real neural tissue, traditional computing architectures physically separate the core computing functions of memory and processing, making fast, efficient and low-energy brain-like computing difficult to achieve. To overcome such limitations, an attractive and alternative goal is to design direct hardware mimics of brain neurons and synapses which, when connected in appropriate networks (or neuromorphic systems), process information in a way more fundamentally analogous to that of real brains. Here we present an all-optical approach to achieving such a goal. Specifically, we demonstrate an all-optical spiking neuron device and connect it, via an integrated photonics network, to photonic synapses to deliver a small-scale all-optical neurosynaptic system capable of supervised and unsupervised learning. Moreover, we exploit wavelength division multiplexing techniques to implement a scalable circuit architecture for photonic neural networks, successfully demonstrating pattern recognition directly in the optical domain using a photonic system comprising 140 elements. Such optical implementations of neurosynaptic networks promise access to the high speed and bandwidth inherent to optical systems, which would be very attractive for the direct processing of telecommunication and visual data in the optical domain.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Hybrid quantum photonics based on artificial atoms placed inside one hole of a photonic crystal cavity
Authors:
Konstantin G. Fehler,
Lukas Antoniuk,
Niklas Lettner,
Anna P. Ovvyan,
Richard Waltrich,
Nico Gruhler,
Valery A. Davydov,
Viatcheslav N. Agafonov,
Wolfram H. P. Pernice,
Alexander Kubanek
Abstract:
Spin-based quantum photonics promise to realize distributed quantum computing and quantum networks. The performance depends on efficient entanglement distribution, where the efficiency can be boosted by means of cavity quantum electrodynamics. The central challenge is the development of compact devices with large spin-photon coupling rates and high operation bandwidth. Photonic crystal cavities co…
▽ More
Spin-based quantum photonics promise to realize distributed quantum computing and quantum networks. The performance depends on efficient entanglement distribution, where the efficiency can be boosted by means of cavity quantum electrodynamics. The central challenge is the development of compact devices with large spin-photon coupling rates and high operation bandwidth. Photonic crystal cavities comprise strong field confinement but put high demands on accurate positioning of an atomic system in the mode field maximum. Color center in diamond, and in particular the negatively-charged Silicon-Vacancy center, emerged as a promising atom-like systems. Large spectral stability and access to long-lived, nuclear spin memories enabled elementary demonstrations of quantum network nodes including memory-enhanced quantum communication. In a hybrid approach, we deterministically place SiV$^-$-containing nanodiamonds inside one hole of a one-dimensional, free-standing, Si$_3$N$_4$-based photonic crystal cavity and coherently couple individual optical transitions to the cavity mode. We optimize the light-matter coupling by utilizing two-mode composition, waveguiding, Purcell-enhancement and cavity resonance tuning. The resulting photon flux is increased by more than a factor of 14 as compared to free-space. The corresponding lifetime shortening to below 460 ps puts the potential operation bandwidth beyond GHz rates. Our results mark an important step to realize quantum network nodes based on hybrid quantum photonics with SiV$^-$- center in nanodiamonds.
△ Less
Submitted 1 February, 2021; v1 submitted 21 December, 2020;
originally announced December 2020.
-
Monadic Pavlovian associative learning in a backpropagation-free photonic network
Authors:
James Y. S. Tan,
Zengguang Cheng,
Johannes Feldmann,
Xuan Li,
Nathan Youngblood,
Utku E. Ali,
C. David Wright,
Wolfram H. P. Pernice,
Harish Bhaskaran
Abstract:
Over a century ago, Ivan P. Pavlov, in a classic experiment, demonstrated how dogs can learn to associate a ringing bell with food, thereby causing a ring to result in salivation. Today, it is rare to find the use of Pavlovian type associative learning for artificial intelligence (AI) applications even though other learning concepts, in particular backpropagation on artificial neural networks (ANN…
▽ More
Over a century ago, Ivan P. Pavlov, in a classic experiment, demonstrated how dogs can learn to associate a ringing bell with food, thereby causing a ring to result in salivation. Today, it is rare to find the use of Pavlovian type associative learning for artificial intelligence (AI) applications even though other learning concepts, in particular backpropagation on artificial neural networks (ANNs) have flourished. However, training using the backpropagation method on 'conventional' ANNs, especially in the form of modern deep neural networks (DNNs), is computationally and energy intensive. Here we experimentally demonstrate a form of backpropagation-free learning using a single (or monadic) associative hardware element. We realize this on an integrated photonic platform using phase-change materials combined with on-chip cascaded directional couplers. We then develop a scaled-up circuit network using our monadic Pavlovian photonic hardware that delivers a distinct machine-learning framework based on single-element associations and, importantly, using backpropagation-free architectures to address general learning tasks. Our approach reduces the computational burden imposed by learning in conventional neural network approaches, thereby increasing speed, whilst also offering higher bandwidth inherent to our photonic implementation.
△ Less
Submitted 5 August, 2022; v1 submitted 30 November, 2020;
originally announced November 2020.
-
Single organic molecules for photonic quantum technologies
Authors:
C. Toninelli,
I. Gerhardt,
A. S. Clark,
A. Reserbat-Plantey,
S. Götzinger,
Z. Ristanovic,
M. Colautti,
P. Lombardi,
K. D. Major,
I. Deperasińska,
W. H. Pernice,
F. H. L. Koppens,
B. Kozankiewicz,
A. Gourdon,
V. Sandoghdar,
M. Orrit
Abstract:
Isolating single molecules in the solid state has allowed fundamental experiments in basic and applied sciences. When cooled down to liquid helium temperature, certain molecules show transition lines, that are tens of megahertz wide, limited only by the excited state lifetime. The extreme flexibility in the synthesis of organic materials provides, at low costs, a wide palette of emission wavelengt…
▽ More
Isolating single molecules in the solid state has allowed fundamental experiments in basic and applied sciences. When cooled down to liquid helium temperature, certain molecules show transition lines, that are tens of megahertz wide, limited only by the excited state lifetime. The extreme flexibility in the synthesis of organic materials provides, at low costs, a wide palette of emission wavelengths and supporting matrices for such single chromophores. In the last decades, the controlled coupling to photonic structures has led to an optimized interaction efficiency with light. Molecules can hence be operated as single photon sources and as non-linear elements with competitive performance in terms of coherence, scalability and compatibility with diverse integrated platforms. Moreover, they can be used as transducers for the optical read-out of fields and material properties, with the promise of single-quanta resolution in the sensing of charges and motion. We show that quantum emitters based on single molecules hold promise to play a key role in the development of quantum science and technologies.
△ Less
Submitted 11 November, 2020; v1 submitted 10 November, 2020;
originally announced November 2020.
-
Photonics for artificial intelligence and neuromorphic computing
Authors:
Bhavin J. Shastri,
Alexander N. Tait,
Thomas Ferreira de Lima,
Wolfram H. P. Pernice,
Harish Bhaskaran,
C. David Wright,
Paul R. Prucnal
Abstract:
Research in photonic computing has flourished due to the proliferation of optoelectronic components on photonic integration platforms. Photonic integrated circuits have enabled ultrafast artificial neural networks, providing a framework for a new class of information processing machines. Algorithms running on such hardware have the potential to address the growing demand for machine learning and a…
▽ More
Research in photonic computing has flourished due to the proliferation of optoelectronic components on photonic integration platforms. Photonic integrated circuits have enabled ultrafast artificial neural networks, providing a framework for a new class of information processing machines. Algorithms running on such hardware have the potential to address the growing demand for machine learning and artificial intelligence, in areas such as medical diagnosis, telecommunications, and high-performance and scientific computing. In parallel, the development of neuromorphic electronics has highlighted challenges in that domain, in particular, related to processor latency. Neuromorphic photonics offers sub-nanosecond latencies, providing a complementary opportunity to extend the domain of artificial intelligence. Here, we review recent advances in integrated photonic neuromorphic systems, discuss current and future challenges, and outline the advances in science and technology needed to meet those challenges.
△ Less
Submitted 12 November, 2020; v1 submitted 30 October, 2020;
originally announced November 2020.
-
Coherent characterisation of a single molecule in a photonic black box
Authors:
Sebastien Boissier,
Ross C. Schofield,
Lin Jin,
Anna Ovvyan,
Salahuddin Nur,
Frank H. L. Koppens,
Costanza Toninelli,
Wolfram H. P. Pernice,
Kyle D. Major,
E. A. Hinds,
Alex S. Clark
Abstract:
Extinction spectroscopy is a powerful tool for demonstrating the coupling of a single quantum emitter to a photonic structure. However, it can be challenging in all but the simplest of geometries to deduce an accurate value of the coupling efficiency from the measured spectrum. Here we develop a theoretical framework to deduce the coupling efficiency from the measured transmission and reflection s…
▽ More
Extinction spectroscopy is a powerful tool for demonstrating the coupling of a single quantum emitter to a photonic structure. However, it can be challenging in all but the simplest of geometries to deduce an accurate value of the coupling efficiency from the measured spectrum. Here we develop a theoretical framework to deduce the coupling efficiency from the measured transmission and reflection spectra without precise knowledge of the photonic environment. We then consider the case of a waveguide interrupted by a transverse cut in which an emitter is placed. We apply that theory to a silicon nitride waveguide interrupted by a gap filled with anthracene that is doped with dibenzoterrylene molecules. We describe the fabrication of these devices, and experimentally characterise the waveguide coupling of a single molecule in the gap.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
Narrow Line Width Quantum Emitters in an Electron-Beam-Shaped Polymer
Authors:
Carlotta Ciancico,
Kevin G. Schädler,
Sofia Pazzagli,
Maja Colautti,
Pietro Lombardi,
Johann Osmond,
Camilla Dore,
Agustín Mihi,
Anna P. Ovvyan,
Wolfram H. P. Pernice,
E. Berretti,
A. Lavacchi,
Costanza Toninelli,
Frank H. L. Koppens,
Antoine Reserbat-Plantey
Abstract:
Solid-state single photon sources (SPSs) with narrow line width play an important role in many leading quantum technologies. Within the wide range of SPSs studied to date, single fluorescent molecules hosted in organic crystals stand out as bright, photostable SPSs with a lifetime-limited optical resonance at cryogenic temperatures. Furthermore, recent results have demonstrated that photostability…
▽ More
Solid-state single photon sources (SPSs) with narrow line width play an important role in many leading quantum technologies. Within the wide range of SPSs studied to date, single fluorescent molecules hosted in organic crystals stand out as bright, photostable SPSs with a lifetime-limited optical resonance at cryogenic temperatures. Furthermore, recent results have demonstrated that photostability and narrow line widths are still observed from single molecules hosted in a nanocrystalline environment, which paves the way for their integration with photonic circuitry. Polymers offer a compatible matrix for embedding nanocrystals and provide a versatile yet low-cost approach for making nanophotonic structures on chip that guide light and enhance coupling to nanoscale emitters. Here, we present a deterministic nanostructuring technique based on electron-beam lithography for shaping polymers with embedded single molecules. Our approach provides a direct means of structuring the nanoscale environment of narrow line width emitters while preserving their emission properties.
△ Less
Submitted 2 April, 2020;
originally announced April 2020.
-
Purcell-Enhanced Emission from Individual SiV$^-$ Center in Nanodiamonds Coupled to a Si$_3$N$_4$-Based, Photonic Crystal Cavity
Authors:
Konstantin G. Fehler,
Anna P. Ovvyan,
Lukas Antoniuk,
Niklas Lettner,
Nico Gruhler,
Valery A. Davydov,
Viatcheslav N. Agafonov,
Wolfram H. P. Pernice,
Alexander Kubanek
Abstract:
Hybrid quantum photonics combines classical photonics with quantum emitters in a postprocessing step. It facilitates to link ideal quantum light sources to optimized photonic platforms. Optical cavities enable to harness the Purcell-effect boosting the device efficiency. Here, we postprocess a free-standing, crossed-waveguide photonic crystal cavity based on Si$_3$N$_4$ with SiV$^-$ center in nano…
▽ More
Hybrid quantum photonics combines classical photonics with quantum emitters in a postprocessing step. It facilitates to link ideal quantum light sources to optimized photonic platforms. Optical cavities enable to harness the Purcell-effect boosting the device efficiency. Here, we postprocess a free-standing, crossed-waveguide photonic crystal cavity based on Si$_3$N$_4$ with SiV$^-$ center in nanodiamonds. We develop a routine that holds the capability to optimize all degrees of freedom of the evanescent coupling term utilizing AFM nanomanipulation. After a few optimization cycles we resolve the fine-structure of individual SiV$^-$ centers and achieve a Purcell enhancement of more than 4 on individual optical transitions, meaning that four out of five spontaneously emitted photons are channeled into the photonic device. Our work opens up new avenues to construct efficient quantum photonic devices.
△ Less
Submitted 28 April, 2020; v1 submitted 14 October, 2019;
originally announced October 2019.
-
Superconducting nanowire single-photon spectrometer exploiting cascaded photonic crystal cavities
Authors:
Youngsun Yun,
Andreas Vetter,
Robin Stegmueller,
Simone Ferrari,
Wolfram H. P. Pernice,
Carsten Rockstuhl,
Changhyoup Lee
Abstract:
Superconducting nanowire single-photon detectors promise efficient (~100%) and fast (~Gcps) detection of light at the single-photon level. They constitute one of the building blocks to realize integrated quantum optical circuits in a waveguide architecture. The optical response of single-photon detectors, however, is limited to measure only the presence of photons. It misses the capability to reso…
▽ More
Superconducting nanowire single-photon detectors promise efficient (~100%) and fast (~Gcps) detection of light at the single-photon level. They constitute one of the building blocks to realize integrated quantum optical circuits in a waveguide architecture. The optical response of single-photon detectors, however, is limited to measure only the presence of photons. It misses the capability to resolve the spectrum of a possible broadband illumination. In this work, we propose the optical design for a superconducting nanowire single-photon spectrometer in an integrated optical platform. We exploit a cascade of cavities with different resonance wavelengths side-coupled to a photonic crystal bus waveguide. This allows to demultiplex different wavelengths into different spatial regions, where individual superconducting nanowires that measure the presence of single photons are placed next to these cavities. We employ temporal coupled-mode theory to derive the optimal conditions to achieve a high absorption efficiency in the nanowire with fine spectral resolution. It is shown that the use of a mirror at the end of the cascaded system that terminates the photonic crystal bus waveguide increases the absorption efficiency up to unity, in principle, in the absence of loss. The expected response is demonstrated by full-wave simulations for both two-dimensional and three-dimensional structures. Absorption efficiencies of about 80% are achieved both in two-dimensional structures for four cascaded cavities and in three-dimensional structures for two cascaded cavities. The achieved spectral resolution is about 1 nm. We expect that the proposed setup, both analytically studied and numerically demonstrated in this work, offers a great impetus for future quantum nanophotonic on-chip technologies.
△ Less
Submitted 3 February, 2020; v1 submitted 5 August, 2019;
originally announced August 2019.
-
Non-volatile silicon photonic memory with more than 4-bit per cell capability
Authors:
Xuan Li,
Nathan Youngblood,
C. David Wright,
Wolfram H. P. Pernice,
Harish Bhaskaran
Abstract:
We present the first demonstration of an integrated photonic phase-change memory using GeSbTe-225 on silicon-on-insulator and demonstrate reliable multilevel operation with a single programming pulse. We also compare our results on silicon with previous demonstrations on silicon nitride. Crucially, achieving this on silicon enables tighter integration of traditional electronics with photonic memor…
▽ More
We present the first demonstration of an integrated photonic phase-change memory using GeSbTe-225 on silicon-on-insulator and demonstrate reliable multilevel operation with a single programming pulse. We also compare our results on silicon with previous demonstrations on silicon nitride. Crucially, achieving this on silicon enables tighter integration of traditional electronics with photonic memories in future, making phase-change photonic memory a viable and integrable technology.
△ Less
Submitted 29 April, 2019;
originally announced April 2019.
-
Plasmonic nanogap enhanced phase change devices with dual electrical-optical functionality
Authors:
Nikolaos Farmakidis,
Nathan Youngblood,
Xuan Li,
James Tan,
Jacob L. Swett,
Zengguang Cheng,
David C Wright,
Wolfram HP Pernice,
Harish Bhaskaran
Abstract:
Modern-day computers use electrical signaling for processing and storing data which is bandwidth limited and power-hungry. These limitations are bypassed in the field of communications, where optical signaling is the norm. To exploit optical signaling in computing, however, new on-chip devices that work seamlessly in both electrical and optical domains are needed. Phase change devices can in princ…
▽ More
Modern-day computers use electrical signaling for processing and storing data which is bandwidth limited and power-hungry. These limitations are bypassed in the field of communications, where optical signaling is the norm. To exploit optical signaling in computing, however, new on-chip devices that work seamlessly in both electrical and optical domains are needed. Phase change devices can in principle provide such functionality, but doing so in a single device has proved elusive due to conflicting requirements of size-limited electrical switching and diffraction-limited photonic devices. Here, we combine plasmonics, photonics and electronics to deliver a novel integrated phase-change memory and computing cell that can be electrically or optically switched between binary or multilevel states, and read-out in either mode, thus merging computing and communications technologies.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
In-memory computing on a photonic platform
Authors:
Carlos Ríos,
Nathan Youngblood,
Zengguang Cheng,
Manuel Le Gallo,
Wolfram H. P. Pernice,
C David Wright,
Abu Sebastian,
Harish Bhaskaran
Abstract:
Collocated data processing and storage are the norm in biological systems. Indeed, the von Neumann computing architecture, that physically and temporally separates processing and memory, was born more of pragmatism based on available technology. As our ability to create better hardware improves, new computational paradigms are being explored. Integrated photonic circuits are regarded as an attract…
▽ More
Collocated data processing and storage are the norm in biological systems. Indeed, the von Neumann computing architecture, that physically and temporally separates processing and memory, was born more of pragmatism based on available technology. As our ability to create better hardware improves, new computational paradigms are being explored. Integrated photonic circuits are regarded as an attractive solution for on-chip computing using only light, leveraging the increased speed and bandwidth potential of working in the optical domain, and importantly, removing the need for time and energy sapping electro-optical conversions. Here we show that we can combine the emerging area of integrated optics with collocated data storage and processing to enable all-photonic in-memory computations. By employing non-volatile photonic elements based on the phase-change material, Ge2Sb2Te5, we are able to achieve direct scalar multiplication on single devices. Featuring a novel single-shot Write/Erase and a drift-free process, such elements can multiply two scalar numbers by mapping their values to the energy of an input pulse and to the transmittance of the device, codified in the crystallographic state of the element. The output pulse, carrying the information of the light-matter interaction, is the result of the computation. Our all-optical approach is novel, easy to fabricate and operate, and sets the stage for development of entirely photonic computers.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Beaming light from a quantum emitter with a planar optical antenna
Authors:
Simona Checcucci,
Pietro Lombardi,
Sahrish Rizvi,
Fabrizio Sgrignuoli,
Nico Gruhler,
Frederik B. C. Dieleman,
Francesco Saverio Cataliotti,
Wolfram H. P. Pernice,
Mario Agio,
Costanza Toninelli
Abstract:
The efficient interaction of light with quantum emitters is crucial to most applications in nano and quantum photonics, such as sensing or quantum information processing. Effective excitation and photon extraction are particularly important for the weak signals emitted by a single atom or molecule. Recent works have introduced novel collection strategies, which demonstrate that large efficiencies…
▽ More
The efficient interaction of light with quantum emitters is crucial to most applications in nano and quantum photonics, such as sensing or quantum information processing. Effective excitation and photon extraction are particularly important for the weak signals emitted by a single atom or molecule. Recent works have introduced novel collection strategies, which demonstrate that large efficiencies can be achieved by either planar dielectric antennas combined with high numerical-aperture objectives or optical nanostructures that beam emission into a narrow angular distribution. However, the first approach requires the use of elaborate collection optics, while the latter is based on accurate positioning of the quantum emitter near complex nanoscale architectures; hence, sophisticated fabrication and experimental capabilities are needed. Here, we present a theoretical and experimental demonstration of a planar optical antenna that beams light emitted by a single molecule, which results in increased collection efficiency at small angles without stringent requirements on the emitter position. The proposed device exhibits broadband performance and is spectrally scalable, and it is simple to fabricate and therefore applies to a wide range of quantum emitters. Our design finds immediate application in spectroscopy, quantum optics and sensing.
△ Less
Submitted 30 January, 2017;
originally announced January 2017.
-
Photostable molecules on chip: integrated single photon sources for quantum technologies
Authors:
P. E. Lombardi,
A. P. Ovvyan,
S. Pazzagli,
G. Mazzamuto,
G. Kewes,
O. Neitzke,
N. Gruhler,
O. Benson,
W. H. P. Pernice,
F. S. Cataliotti,
C. Toninelli
Abstract:
The on-chip integration of quantum light sources and nonlinear elements poses a serious challenge to the development of a scalable photonic platform for quantum information and communication. In this work we demonstrate the potential of a novel hybrid technology which combines single organic molecules as quantum emitters and dielectric chips, consisting of ridge waveguides and grating far-field co…
▽ More
The on-chip integration of quantum light sources and nonlinear elements poses a serious challenge to the development of a scalable photonic platform for quantum information and communication. In this work we demonstrate the potential of a novel hybrid technology which combines single organic molecules as quantum emitters and dielectric chips, consisting of ridge waveguides and grating far-field couplers. Dibenzoterrylene molecules in thin anthracene crystals exhibit long-term photostability, easy fabrication methods, almost unitary quantum yield and life-time limited emission at cryogenic temperatures. We couple such single emitters to silicon nitride ridge waveguide with a coupling efficiency of up to 42+/-2 %, considering both propagation directions. The platform is devised to support both on-chip and free-space single photon processing.
△ Less
Submitted 19 April, 2017; v1 submitted 2 January, 2017;
originally announced January 2017.
-
Sub-Poisson-Binomial Light
Authors:
Changhyoup Lee,
Simone Ferrari,
Wolfram H. P. Pernice,
Carsten Rockstuhl
Abstract:
We introduce the general parameter Q_PB that provides an experimentally accessible nonclassicality measure for light. The parameter is quantified by the click statistics obtained from on-off detectors in a general multiplexing detection setup. Sub-Poisson-binomial statistics, observed by Q_PB<0, indicates that a given state of light is nonclassical. Our new parameter replaces the binomial paramete…
▽ More
We introduce the general parameter Q_PB that provides an experimentally accessible nonclassicality measure for light. The parameter is quantified by the click statistics obtained from on-off detectors in a general multiplexing detection setup. Sub-Poisson-binomial statistics, observed by Q_PB<0, indicates that a given state of light is nonclassical. Our new parameter replaces the binomial parameter Q_B for more general cases, where any unbalance among the multiplexed modes is allowed, thus enabling the use of arbitrary multiplexing schemes. The significance of the parameter Q_PB is theoretically examined in a measurement setup that only consists of a ring resonator and a single on-off detector. The proposed setup exploits minimal experimental resources and is geared towards a fully integrated quantum nanophotonic circuit. The results show that nonclassical features remain noticeable even in the presence of significant losses, rendering the new nonclassicality test more practical and flexible to be used in various nanophotonic platforms.
△ Less
Submitted 25 November, 2016; v1 submitted 15 June, 2016;
originally announced June 2016.
-
Diamond as a material for monolithically integrated optical and optomechanical devices
Authors:
Patrik Rath,
Sandeep Ummethala,
Christoph Nebel,
Wolfram H. P. Pernice
Abstract:
Diamond provides superior optical and mechanical material properties, making it a prime candidate for the realization of integrated optomechanical circuits. Because diamond sub- strates have matured in size, efficient nanostructuring methods can be used to realize full-scale integrated devices. Here we review optical and mechanical resonators fab- ricated from polycrystalline as well as single cry…
▽ More
Diamond provides superior optical and mechanical material properties, making it a prime candidate for the realization of integrated optomechanical circuits. Because diamond sub- strates have matured in size, efficient nanostructuring methods can be used to realize full-scale integrated devices. Here we review optical and mechanical resonators fab- ricated from polycrystalline as well as single crystalline diamond. We present relevant material properties with respect to implementing optomechanical devices and compare them with other material systems. We give an overview of diamond integrated optomechanical circuits and present the optical readout mechanism and the actuation via optical or electrostatic forces that have been implemented to date. By combining diamond nanophotonic circuits with superconducting nanowires single photons can be efficiently detected on such chips and we outline how future single photon optomechanical circuits can be realized on this platform.
△ Less
Submitted 12 March, 2016;
originally announced March 2016.
-
Travelling-wave single-photon detectors integrated with diamond photonic circuits - operation at visible and telecom wavelengths with a timing jitter down to 23 ps
Authors:
Patrik Rath,
Andreas Vetter,
Vadim Kovalyuk,
Simone Ferrari,
Oliver Kahl,
Christoph Nebel,
Gregory N. Goltsman,
Alexander Korneev,
Wolfram H. P. Pernice
Abstract:
We report on the design, fabrication and measurement of travelling-wave superconducting nanowire single-photon detectors (SNSPDs) integrated with polycrystalline diamond photonic circuits. We analyze their performance both in the near-infrared wavelength regime around 1600 nm and at 765 nm. Near-IR detection is important for compatibility with the telecommunication infrastructure, while operation…
▽ More
We report on the design, fabrication and measurement of travelling-wave superconducting nanowire single-photon detectors (SNSPDs) integrated with polycrystalline diamond photonic circuits. We analyze their performance both in the near-infrared wavelength regime around 1600 nm and at 765 nm. Near-IR detection is important for compatibility with the telecommunication infrastructure, while operation in the visible wavelength range is relevant for compatibility with the emission line of silicon vacancy centers in diamond which can be used as efficient single-photon sources. Our detectors feature high critical currents (up to 31 μA) and high performance in terms of efficiency (up to 74% at 765 nm), noise-equivalent power (down to 4.4*10^-19 W/(Hz^1/2) at 765 nm) and timing jitter (down to 23 ps).
△ Less
Submitted 7 March, 2016;
originally announced March 2016.
-
Diamond electro-optomechanical resonators integrated in nanophotonic circuits
Authors:
P. Rath,
S. Ummethala,
S. Diewald,
G. Lewes-Malandrakis,
D. Brink,
N. Heidrich,
C. Nebel,
W. H. P. Pernice
Abstract:
Diamond integrated photonic devices are promising candidates for emerging applications in nanophotonics and quantum optics. Here we demonstrate active modulation of diamond nanophotonic circuits by exploiting mechanical degrees of freedom in free-standing diamond electro-optomechanical resonators. We obtain high quality factors up to 9600, allowing us to read out the driven nanomechanical response…
▽ More
Diamond integrated photonic devices are promising candidates for emerging applications in nanophotonics and quantum optics. Here we demonstrate active modulation of diamond nanophotonic circuits by exploiting mechanical degrees of freedom in free-standing diamond electro-optomechanical resonators. We obtain high quality factors up to 9600, allowing us to read out the driven nanomechanical response with integrated optical interferometers with high sensitivity. We are able to excite higher order mechanical modes up to 115 MHz and observe the nanomechanical response also under ambient conditions.
△ Less
Submitted 28 October, 2014;
originally announced October 2014.
-
Diamond Nanophotonic Circuits Functionalized by Dip-pen Nanolithography
Authors:
Patrik Rath,
Michael Hirtz,
Georgia Lewes-Malandrakis,
Dietmar Brink,
Christoph Nebel,
Wolfram H. P. Pernice
Abstract:
Nanophotonic circuits based on polished diamond thin films are prepared. These circuits cover a wide wavelength range across the entire visible spectrum. Integrated devices are surface functionalized site-specifically and in parallel using dip-pen nanolithography with a minimum linewidth of 100 nm. Multicolor fluorescence is coupled into the underlying photonic network using microring resonators a…
▽ More
Nanophotonic circuits based on polished diamond thin films are prepared. These circuits cover a wide wavelength range across the entire visible spectrum. Integrated devices are surface functionalized site-specifically and in parallel using dip-pen nanolithography with a minimum linewidth of 100 nm. Multicolor fluorescence is coupled into the underlying photonic network using microring resonators and grating structures.
△ Less
Submitted 13 October, 2014;
originally announced October 2014.
-
High-Q optomechanical circuits made from polished nanocrystalline diamond thin films
Authors:
S. Ummethala,
P. Rath,
G. Lewes-Malandrakis,
D. Brink,
C. Nebel,
W. H. P. Pernice
Abstract:
We demonstrate integrated optomechanical circuits with high mechanical quality factors prepared from nanocrystalline diamond thin films. Using chemomechanical polishing, the RMS surface roughness of as grown polycrystalline diamond films is reduced below 3nm to allow for the fabrication of high-quality nanophotonic circuits. By integrating free-standing nanomechanical resonators into integrated op…
▽ More
We demonstrate integrated optomechanical circuits with high mechanical quality factors prepared from nanocrystalline diamond thin films. Using chemomechanical polishing, the RMS surface roughness of as grown polycrystalline diamond films is reduced below 3nm to allow for the fabrication of high-quality nanophotonic circuits. By integrating free-standing nanomechanical resonators into integrated optical devices, efficient read-out of the thermomechanical motion of diamond resonators is achieved with on-chip Mach-Zehnder interferometers. Mechanical quality factors up to 28,800 are measured for four-fold clamped optomechanical resonators coupled to the evanescent near-field of nanophotonic waveguides. Our platform holds promise for large-scale integration of optomechanical circuits for on-chip metrology and sensing applications.
△ Less
Submitted 22 March, 2014;
originally announced March 2014.
-
High performance nanophotonic circuits based on partially buried horizontal slot waveguides
Authors:
Chi Xiong,
Wolfram H. P. Pernice,
Mo Li,
Hong X. Tang
Abstract:
We present a novel platform to construct high-performance nanophotonic devices in low refractive index dielectric films at telecoms wavelengths. The formation of horizontal slots by PECVD deposition of high index amorphous silicon provides a convenient and low-cost way to tailor nanophotonic devices to application needs. Low propagation loss of less than 2 dB/cm is obtained allowing us to fabricat…
▽ More
We present a novel platform to construct high-performance nanophotonic devices in low refractive index dielectric films at telecoms wavelengths. The formation of horizontal slots by PECVD deposition of high index amorphous silicon provides a convenient and low-cost way to tailor nanophotonic devices to application needs. Low propagation loss of less than 2 dB/cm is obtained allowing us to fabricate optical resonators with measured high optical quality factors exceeding 10^5. We design and experimentally demonstrate on-chip grating couplers to efficiently couple light into integrated circuitry with coupling loss of 4 dB and optical bandwidth exceeding 110 nm. The entire on-chip circuitry consisting of input/output couplers, Mach-Zehnder interferometers with high extinction ratio and ring, racetrack resonators are designed, fabricated and characterized.
△ Less
Submitted 20 January, 2014;
originally announced January 2014.
-
Photonic crystal dumbbell resonators in silicon and aluminum nitride integrated optical circuits
Authors:
W. H. P. Pernice,
Chi Xiong,
H. X. Tang
Abstract:
Tight confinement of light in photonic cavities provides an efficient template for the realization of high optical intensity with strong field gradients. Here we present such a nanoscale resonator device based on a one-dimensional photonic crystal slot cavity. Our design allows for realizing highly localized optical modes with theoretically predicted Q factors in excess of 106. The design is demon…
▽ More
Tight confinement of light in photonic cavities provides an efficient template for the realization of high optical intensity with strong field gradients. Here we present such a nanoscale resonator device based on a one-dimensional photonic crystal slot cavity. Our design allows for realizing highly localized optical modes with theoretically predicted Q factors in excess of 106. The design is demonstrated experimentally both in a high-contrast refractive index system (silicon), as well as in medium refractive index contrast devices made from aluminum nitride. We achieve extinction ratio of 21dB in critically coupled resonators using an on-chip readout platform with loaded Q factors up to 33,000. Our approach holds promise for realizing ultra-small opto-mechanical resonators for high-frequency operation and sensing applications.
△ Less
Submitted 19 January, 2014;
originally announced January 2014.
-
Low-loss, silicon integrated, aluminum nitride photonic circuits and their use for electro-optic signal processing
Authors:
Chi Xiong,
Wolfram H. P. Pernice,
Hong X. Tang
Abstract:
Photonic miniaturization requires seamless integration of linear and nonlinear optical components to achieve passive and active functions simultaneously. Among the available material systems, silicon photonics holds immense promise for optical signal processing and on-chip optical networks. However, silicon is limited to wavelengths above 1100 nm and does not provide the desired lowest order optic…
▽ More
Photonic miniaturization requires seamless integration of linear and nonlinear optical components to achieve passive and active functions simultaneously. Among the available material systems, silicon photonics holds immense promise for optical signal processing and on-chip optical networks. However, silicon is limited to wavelengths above 1100 nm and does not provide the desired lowest order optical nonlinearity for active signal processing. Here we report the integration of aluminum nitride (AlN) films on silicon substrates to bring active functionalities to chip-scale photonics. Using CMOS-compatible sputtered thin films we fabricate AlN-on-insulator waveguides that exhibit low propagation loss (0.6 dB/cm). Exploiting AlN's inherent Pockels effect we demonstrate electro-optic modulation up to 4.5 Gb/s with very low energy consumption (down to 10 fJ/bit). The ultra-wide transparency window of AlN devices also enables high speed modulation at visible wavelengths. Our low cost, wideband, carrier-free photonic circuits hold promise for ultra-low power and high speed signal processing at the microprocessor chip level.
△ Less
Submitted 19 January, 2014;
originally announced January 2014.
-
Active silicon integrated nanophotonics: ferroelectric BaTiO3 devices
Authors:
Chi Xiong,
Wolfram H. P. Pernice,
Joseph H. Ngai,
James W. Reiner,
Divine Kumah,
Frederick J. Walker,
Charles H. Ahn,
Hong X. Tang
Abstract:
The integration of complex oxides on silicon presents opportunities to extend and enhance silicon technology with novel electronic, magnetic, and photonic properties. Among these materials, barium titanate (BaTiO3) is a particularly strong ferroelectric perovskite oxide with attractive dielectric and electro-optic properties. Here we demonstrate nanophotonic circuits incorporating ferroelectric Ba…
▽ More
The integration of complex oxides on silicon presents opportunities to extend and enhance silicon technology with novel electronic, magnetic, and photonic properties. Among these materials, barium titanate (BaTiO3) is a particularly strong ferroelectric perovskite oxide with attractive dielectric and electro-optic properties. Here we demonstrate nanophotonic circuits incorporating ferroelectric BaTiO3 thin films on the ubiquitous silicon-on-insulator (SOI) platform. We grow epitaxial, single-crystalline BaTiO3 directly on SOI and engineer integrated waveguide structures that simultaneously confine light and an RF electric field in the BaTiO3 layer. Using on-chip photonic interferometers, we extract a large effective Pockels coefficient of 213 plus minus 49 pm/V, a value more than six times larger than found in commercial optical modulators based on lithium niobate. The monolithically integrated BaTiO3 optical modulators show modulation bandwidth in the gigahertz regime, which is promising for broadband applications.
△ Less
Submitted 4 February, 2014; v1 submitted 16 January, 2014;
originally announced January 2014.
-
Diamond Integrated Optomechanical Circuits
Authors:
Patrik Rath,
Svetlana Khasminskaya,
Christoph Nebel,
Christoph Wild,
Wolfram H. P. Pernice
Abstract:
Diamond offers unique material advantages for the realization of micro- and nanomechanical resonators due to its high Young's modulus, compatibility with harsh environments and superior thermal properties. At the same time, the wide electronic bandgap of 5.45eV makes diamond a suitable material for integrated optics because of broadband transparency and the absence of free-carrier absorption commo…
▽ More
Diamond offers unique material advantages for the realization of micro- and nanomechanical resonators due to its high Young's modulus, compatibility with harsh environments and superior thermal properties. At the same time, the wide electronic bandgap of 5.45eV makes diamond a suitable material for integrated optics because of broadband transparency and the absence of free-carrier absorption commonly encountered in silicon photonics. Here we take advantage of both to engineer full-scale optomechanical circuits in diamond thin films. We show that polycrystalline diamond films fabricated by chemical vapour deposition provide a convenient waferscale substrate for the realization of high quality nanophotonic devices. Using free-standing nanomechanical resonators embedded in on-chip Mach-Zehnder interferometers, we demonstrate efficient optomechanical transduction via gradient optical forces. Fabricated diamond resonators reproducibly show high mechanical quality factors up to 11,200. Our low cost, wideband, carrier-free photonic circuits hold promise for all-optical sensing and optomechanical signal processing at ultra-high frequencies.
△ Less
Submitted 16 December, 2013;
originally announced December 2013.
-
Waveguide-integrated electroluminescent carbon nanotubes
Authors:
Svetlana Khasminskaya,
Feliks Pyatkov,
Benjamin S. Flavel,
Wolfram H. P. Pernice,
Ralph Krupke
Abstract:
Carbon based optoelectronic devices promise to revolutionize modern integrated circuits by combining outstanding electrical and optical properties into a unified technology. By coupling nanoelectronic devices to nanophotonic structures functional components such as nanoscale light emitting diodes, narrow-band thermal emitters, cavity controlled detectors and wideband electro optic modulators can b…
▽ More
Carbon based optoelectronic devices promise to revolutionize modern integrated circuits by combining outstanding electrical and optical properties into a unified technology. By coupling nanoelectronic devices to nanophotonic structures functional components such as nanoscale light emitting diodes, narrow-band thermal emitters, cavity controlled detectors and wideband electro optic modulators can be realized for chipscale information processing. These devices not only allow the light-matter interaction of low-dimensional systems to be studied, but also provide fundamental building blocks for high bandwidth on-chip communication. Here we demonstrate how light from an electrically-driven carbon-nanotube can be coupled directly into a photonic waveguide architecture. We realize wafer scale, broadband sources integrated with nanophotonic circuits allowing for propagation of light over centimeter distances. Moreover, we show that the spectral properties of the emitter can be controlled directly on chip with passive devices using Mach-Zehnder interferometers and grating structures. The direct, near-field coupling of electrically generated light into a waveguide, opposed to far-field fiber coupling of external light sources, opens new avenues for compact optoelectronic systems in a CMOS compatible framework.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Waveguide integrated low noise NbTiN nanowire single-photon detectors with milli-Hz dark count rate
Authors:
Carsten Schuck,
Wolfram H. P. Pernice,
Hong X. Tang
Abstract:
Superconducting nanowire single-photon detectors are an ideal match for integrated quantum photonic circuits due to their high detection efficiency for telecom wavelength photons. Quantum optical technology also requires single-photon detection with low dark count rate and high timing accuracy. Here we present very low noise superconducting nanowire single-photon detectors based on NbTiN thin film…
▽ More
Superconducting nanowire single-photon detectors are an ideal match for integrated quantum photonic circuits due to their high detection efficiency for telecom wavelength photons. Quantum optical technology also requires single-photon detection with low dark count rate and high timing accuracy. Here we present very low noise superconducting nanowire single-photon detectors based on NbTiN thin films patterned directly on top of Si3N4 waveguides. We systematically investigate a large variety of detector designs and characterize their detection noise performance. Milli-Hz dark count rates are demonstrated over the entire operating range of the nanowire detectors which also feature low timing jitter. The ultra-low dark count rate, in combination with the high detection efficiency inherent to our traveling wave detector geometry, gives rise to a measured noise equivalent power at the 10^(-20) W/Hz^(1/2) level.
△ Less
Submitted 1 June, 2013;
originally announced June 2013.
-
Optical time domain reflectometry with low noise waveguide-coupled superconducting nanowire single-photon detectors
Authors:
Carsten Schuck,
Wolfram H. P. Pernice,
Xiaosong Ma,
Hong X. Tang
Abstract:
We demonstrate optical time domain reflectometry over 200 km of optical fiber using low-noise NbTiN superconducting single-photon detectors integrated with Si3N4 waveguides. Our small detector footprint enables high timing resolution of 50ps and a dark count rate of 3 Hz with unshielded fibers, allowing for identification of defects along the fiber over a dynamic range of 37.4 dB. Photons scattere…
▽ More
We demonstrate optical time domain reflectometry over 200 km of optical fiber using low-noise NbTiN superconducting single-photon detectors integrated with Si3N4 waveguides. Our small detector footprint enables high timing resolution of 50ps and a dark count rate of 3 Hz with unshielded fibers, allowing for identification of defects along the fiber over a dynamic range of 37.4 dB. Photons scattered and reflected back from the fiber under test can be detected in free-running mode without showing dead zones or other impairments often encountered in semiconductor photon-counting optical time domain reflectometers.
△ Less
Submitted 30 May, 2013;
originally announced May 2013.
-
Broadband directional coupling in aluminum nitride nanophotonic circuits
Authors:
Matthias Stegmaier,
Wolfram H. P. Pernice
Abstract:
Aluminum nitride (AlN)-on-insulator has emerged as a promising platform for the realization of linear and non-linear integrated photonic circuits. In order to efficiently route optical signals on-chip, precise control over the interaction and polarization of evanescently coupled waveguide modes is required. Here we employ nanophotonic AlN waveguides to realize directional couplers with a broad cou…
▽ More
Aluminum nitride (AlN)-on-insulator has emerged as a promising platform for the realization of linear and non-linear integrated photonic circuits. In order to efficiently route optical signals on-chip, precise control over the interaction and polarization of evanescently coupled waveguide modes is required. Here we employ nanophotonic AlN waveguides to realize directional couplers with a broad coupling bandwidth and low insertion loss. We achieve uniform splitting of incoming modes, confirmed by high extinction-ratio exceeding 33dB in integrated Mach-Zehnder Interferometers. Optimized three-waveguide couplers furthermore allow for extending the coupling bandwidth over traditional side-coupled devices by almost an order of magnitude, with variable splitting ratio. Our work illustrates the potential of AlN circuits for coupled waveguide optics, DWDM applications and integrated polarization diversity schemes.
△ Less
Submitted 20 March, 2013;
originally announced March 2013.
-
Matrix of integrated superconducting single-photon detectors with high timing resolution
Authors:
Carsten Schuck,
Wolfram H. P. Pernice,
Olga Minaeva,
Mo Li,
Gregory Gol'tsman,
Alexander V. Sergienko,
Hong X. Tang
Abstract:
We demonstrate a large grid of individually addressable superconducting single photon detectors on a single chip. Each detector element is fully integrated into an independent waveguide circuit with custom functionality at telecom wavelengths. High device density is achieved by fabricating the nanowire detectors in traveling wave geometry directly on top of silicon-on-insulator waveguides. Our sup…
▽ More
We demonstrate a large grid of individually addressable superconducting single photon detectors on a single chip. Each detector element is fully integrated into an independent waveguide circuit with custom functionality at telecom wavelengths. High device density is achieved by fabricating the nanowire detectors in traveling wave geometry directly on top of silicon-on-insulator waveguides. Our superconducting single-photon detector matrix includes detector designs optimized for high detection efficiency, low dark count rate and high timing accuracy. As an example, we exploit the high timing resolution of a particularly short nanowire design to resolve individual photon round-trips in a cavity ring-down measurement of a silicon ring resonator.
△ Less
Submitted 5 February, 2013;
originally announced February 2013.
-
NbTiN superconducting nanowire detectors for visible and telecom wavelengths single photon counting on Si3N4 photonic circuits
Authors:
C. Schuck,
W. H. P. Pernice,
H. X. Tang
Abstract:
We demonstrate niobium titanium nitride superconducting nanowires patterned on stoichiometric silicon nitride waveguides for detecting visible and infrared photons. The use of silicon nitride on insulator on silicon substrates allows us to simultaneously realize photonic circuits for visible and infrared light and integrate them with nanowire detectors directly on-chip. By implementing a traveling…
▽ More
We demonstrate niobium titanium nitride superconducting nanowires patterned on stoichiometric silicon nitride waveguides for detecting visible and infrared photons. The use of silicon nitride on insulator on silicon substrates allows us to simultaneously realize photonic circuits for visible and infrared light and integrate them with nanowire detectors directly on-chip. By implementing a traveling wave detector geometry in this material platform, we achieve efficient single photon detection for both wavelength regimes. Our detectors are an ideal match for integrated quantum optics as they provide crucial functionality on a wideband transparent waveguide material.
△ Less
Submitted 4 February, 2013;
originally announced February 2013.
-
Backaction limits on self-sustained optomechanical oscillations
Authors:
M. Poot,
K. Y. Fong,
M. Bagheri,
W. H. P. Pernice,
H. X. Tang
Abstract:
The maximum amplitude of mechanical oscillators coupled to optical cavities are studied both analytically and numerically. The optical backaction on the resonator enables self-sustained oscillations whose limit cycle is set by the dynamic range of the cavity. The maximum attainable amplitude and the phonon generation quantum efficiency of the backaction process are studied for both unresolved and…
▽ More
The maximum amplitude of mechanical oscillators coupled to optical cavities are studied both analytically and numerically. The optical backaction on the resonator enables self-sustained oscillations whose limit cycle is set by the dynamic range of the cavity. The maximum attainable amplitude and the phonon generation quantum efficiency of the backaction process are studied for both unresolved and resolved cavities. Quantum efficiencies far exceeding one are found in the resolved sideband regime where the amplitude is low. On the other hand the maximum amplitude is found in the unresolved system. Finally, the role of mechanical nonlinearities is addressed.
△ Less
Submitted 7 November, 2012;
originally announced November 2012.
-
Aluminum nitride as a new material for chip-scale optomechanics and nonlinear optics
Authors:
Chi Xiong,
Wolfram H. P. Pernice,
Xiankai Sun,
Carsten Schuck,
King Y. Fong,
Hong X. Tang
Abstract:
Silicon photonics has offered a versatile platform for the recent development of integrated optomechanical circuits. However, silicon is limited to wavelengths above 1100 nm and does not allow device operation in the visible spectrum range where low noise lasers are conveniently available. The narrow band gap of silicon also makes silicon optomechanical devices susceptible to strong two-photon abs…
▽ More
Silicon photonics has offered a versatile platform for the recent development of integrated optomechanical circuits. However, silicon is limited to wavelengths above 1100 nm and does not allow device operation in the visible spectrum range where low noise lasers are conveniently available. The narrow band gap of silicon also makes silicon optomechanical devices susceptible to strong two-photon absorption and free carrier absorption, which often introduce strong thermal effect that limit the devices' stability and cooling performance. Further, silicon also does not provide the desired lowest order optical nonlinearity for interfacing with other active electrical components on a chip. On the other hand, aluminum nitride (AlN) is a wideband semiconductor widely used in micromechanical resonators due to its low mechanical loss and high electromechanical coupling strength. Here we report the development of AlN-on-silicon platform for low loss, wideband optical guiding, as well as its use for achieving simultaneous high optical quality and mechanical quality optomechanical devices. Exploiting AlN's inherent second order nonlinearity we further demonstrate electro-optic modulation and efficient second-harmonic generation in AlN photonic circuits. Our results suggest that low cost AlN-on-silicon photonic circuits are excellent substitutes for CMOS-compatible photonic circuits for building new functional optomechanical devices that are free from carrier effects.
△ Less
Submitted 3 October, 2012;
originally announced October 2012.
-
Second harmonic generation in phase matched aluminum nitride waveguides
Authors:
W. H. P. Pernice,
C. Xiong,
C. Schuck,
H. X. Tang
Abstract:
We demonstrate second order optical nonlinearity in aluminum nitride on insulator substrates. Using sputter-deposited aluminum nitride thin films we realize nanophotonic waveguides coupled to micro-ring resonators that simultaneously support cavity resonant modes for both visible and IR light. By using phase matched ring resonators, we achieve efficient second-harmonic generation and are able to g…
▽ More
We demonstrate second order optical nonlinearity in aluminum nitride on insulator substrates. Using sputter-deposited aluminum nitride thin films we realize nanophotonic waveguides coupled to micro-ring resonators that simultaneously support cavity resonant modes for both visible and IR light. By using phase matched ring resonators, we achieve efficient second-harmonic generation and are able to generate up to 0.5uW of visible light on the chip with a conversion efficiency of -46dB. From the measured response we obtain a second order non-linear susceptibility (\c{hi}2) of 4.7pm/V. Our platform provides a viable route for realizing wideband linear and nonlinear optical devices on a chip.
△ Less
Submitted 15 May, 2012;
originally announced May 2012.
-
High Q micro-ring resonators fabricated from polycrystalline aluminum nitride films for near infrared and visible photonics
Authors:
Wolfram H. P. Pernice,
Chi Xiong,
Hong X. Tang
Abstract:
We demonstrate wideband integrated photonic circuits in sputter-deposited aluminum nitride (AlN) thin films. At both near-infrared and visible wavelengths, we achieve low propagation loss in integrated waveguides and realize high-quality optical resonators. In the telecoms C-band (1520-1580 nm), we obtain the highest optical Q factor of 440,000. Critical coupled devices show extinction ratio above…
▽ More
We demonstrate wideband integrated photonic circuits in sputter-deposited aluminum nitride (AlN) thin films. At both near-infrared and visible wavelengths, we achieve low propagation loss in integrated waveguides and realize high-quality optical resonators. In the telecoms C-band (1520-1580 nm), we obtain the highest optical Q factor of 440,000. Critical coupled devices show extinction ratio above 30 dB. For visible wavelengths (around 770 nm), intrinsic quality factors in excess of 30,000 is demonstrated. Our work illustrates the potential of AlN as a low loss material for wideband optical applications.
△ Less
Submitted 8 May, 2012;
originally announced May 2012.
-
High-Q aluminum nitride photonic crystal nanobeam cavities
Authors:
W. H. P. Pernice,
C. Xiong,
C. Schuck,
H. X. Tang
Abstract:
We demonstrate high optical quality factors in aluminum nitride (AlN) photonic crystal nanobeam cavities. Suspended AlN photonic crystal nanobeams are fabricated in sputter-deposited AlN-on-insulator substrates using a self-protecting release process. Employing one-dimensional photonic crystal cavities coupled to integrated optical circuits we measure quality factors up to 146,000. By varying the…
▽ More
We demonstrate high optical quality factors in aluminum nitride (AlN) photonic crystal nanobeam cavities. Suspended AlN photonic crystal nanobeams are fabricated in sputter-deposited AlN-on-insulator substrates using a self-protecting release process. Employing one-dimensional photonic crystal cavities coupled to integrated optical circuits we measure quality factors up to 146,000. By varying the waveguide-cavity coupling gap, extinction ratios in excess of 15 dB are obtained. Our results open the door for integrated photonic bandgap structures made from a low loss, wide-transparency, nonlinear optical material system.
△ Less
Submitted 7 May, 2012;
originally announced May 2012.