-
Exploring atmospheric neutrino oscillations at ESSnuSB
Authors:
ESSnuSB,
:,
J. Aguilar,
M. Anastasopoulos,
E. Baussan,
A. K. Bhattacharyya,
A. Bignami,
M. Blennow,
M. Bogomilov,
B. Bolling,
E. Bouquerel,
F. Bramati,
A. Branca,
G. Brunetti,
I. Bustinduy,
C. J. Carlile,
J. Cederkall,
T. W. Choi,
S. Choubey,
P. Christiansen,
M. Collins,
E. Cristaldo Morales,
P. Cupiał,
H. Danared,
J. P. A. M. de André
, et al. (64 additional authors not shown)
Abstract:
This study provides an analysis of atmospheric neutrino oscillations at the ESSnuSB far detector facility. The prospects of the two cylindrical Water Cherenkov detectors with a total fiducial mass of 540 kt are investigated over 10 years of data taking in the standard three-flavor oscillation scenario. We present the confidence intervals for the determination of mass ordering, $θ_{23}$ octant as w…
▽ More
This study provides an analysis of atmospheric neutrino oscillations at the ESSnuSB far detector facility. The prospects of the two cylindrical Water Cherenkov detectors with a total fiducial mass of 540 kt are investigated over 10 years of data taking in the standard three-flavor oscillation scenario. We present the confidence intervals for the determination of mass ordering, $θ_{23}$ octant as well as for the precisions on $\sin^2θ_{23}$ and $|Δm_{31}^2|$. It is shown that mass ordering can be resolved by $3σ$ CL ($5σ$ CL) after 4 years (10 years) regardless of the true neutrino mass ordering. Correspondingly, the wrong $θ_{23}$ octant could be excluded by $3σ$ CL after 4 years (8 years) in the case where the true neutrino mass ordering is normal ordering (inverted ordering). The results presented in this work are complementary to the accelerator neutrino program in the ESSnuSB project.
△ Less
Submitted 9 October, 2024; v1 submitted 31 July, 2024;
originally announced July 2024.
-
Interim report for the International Muon Collider Collaboration (IMCC)
Authors:
C. Accettura,
S. Adrian,
R. Agarwal,
C. Ahdida,
C. Aimé,
A. Aksoy,
G. L. Alberghi,
S. Alden,
N. Amapane,
D. Amorim,
P. Andreetto,
F. Anulli,
R. Appleby,
A. Apresyan,
P. Asadi,
M. Attia Mahmoud,
B. Auchmann,
J. Back,
A. Badea,
K. J. Bae,
E. J. Bahng,
L. Balconi,
F. Balli,
L. Bandiera,
C. Barbagallo
, et al. (362 additional authors not shown)
Abstract:
The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accele…
▽ More
The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider.
△ Less
Submitted 17 July, 2024;
originally announced July 2024.
-
Decoherence in Neutrino Oscillation at the ESSnuSB Experiment
Authors:
ESSnuSB,
:,
J. Aguilar,
M. Anastasopoulos,
E. Baussan,
A. K. Bhattacharyya,
A. Bignami,
M. Blennow,
M. Bogomilov,
B. Bolling,
E. Bouquerel,
F. Bramati,
A. Branca,
G. Brunetti,
I. Bustinduy,
C. J. Carlile,
J. Cederkall,
T. W. Choi,
S. Choubey,
P. Christiansen,
M. Collins,
E. Cristaldo Morales,
P. Cupiał,
H. Danared,
D. Dancila
, et al. (72 additional authors not shown)
Abstract:
Neutrino oscillation experiments provide a unique window in exploring several new physics scenarios beyond the standard three flavour. One such scenario is quantum decoherence in neutrino oscillation which tends to destroy the interference pattern of neutrinos reaching the far detector from the source. In this work, we study the decoherence in neutrino oscillation in the context of the ESSnuSB exp…
▽ More
Neutrino oscillation experiments provide a unique window in exploring several new physics scenarios beyond the standard three flavour. One such scenario is quantum decoherence in neutrino oscillation which tends to destroy the interference pattern of neutrinos reaching the far detector from the source. In this work, we study the decoherence in neutrino oscillation in the context of the ESSnuSB experiment. We consider the energy-independent decoherence parameter and derive the analytical expressions for P$_{μe}$ and P$_{μμ}$ probabilities in vacuum. We have computed the capability of ESSnuSB to put bounds on the decoherence parameters namely, $Γ_{21}$ and $Γ_{32}$ and found that the constraints on $Γ_{21}$ are competitive compared to the DUNE bounds and better than the most stringent LBL ones from MINOS/MINOS+. We have also investigated the impact of decoherence on the ESSnuSB measurement of the Dirac CP phase $δ_{\rm CP}$ and concluded that it remains robust in the presence of new physics.
△ Less
Submitted 2 August, 2024; v1 submitted 26 April, 2024;
originally announced April 2024.
-
Study of non-standard interaction mediated by a scalar field at ESSnuSB experiment
Authors:
ESSnuSB,
:,
J. Aguilar,
M. Anastasopoulos,
E. Baussan,
A. K. Bhattacharyya,
A. Bignami,
M. Blennow,
M. Bogomilov,
B. Bolling,
E. Bouquerel,
F. Bramati,
A. Branca,
W. Brorsson,
I. Bustinduy,
C. J. Carlile,
J. Cederkall,
T. W. Choi,
S. Choubey,
P. Christiansen,
M. Collins,
E. Cristaldo Morales,
H. Danared,
D. Dancila,
J. P. A. M. de André
, et al. (67 additional authors not shown)
Abstract:
In this paper we study non-standard interactions mediated by a scalar field (SNSI) in the context of ESSnuSB experiment. In particular we study the capability of ESSnuSB to put bounds on the SNSI parameters and also study the impact of SNSI in the measurement of the leptonic CP phase $δ_{\rm CP}$. Existence of SNSI modifies the neutrino mass matrix and this modification can be expressed in terms o…
▽ More
In this paper we study non-standard interactions mediated by a scalar field (SNSI) in the context of ESSnuSB experiment. In particular we study the capability of ESSnuSB to put bounds on the SNSI parameters and also study the impact of SNSI in the measurement of the leptonic CP phase $δ_{\rm CP}$. Existence of SNSI modifies the neutrino mass matrix and this modification can be expressed in terms of three diagonal real parameters ($η_{ee}$, $η_{μμ}$ and $η_{ττ}$) and three off-diagonal complex parameters ($η_{e μ}$, $η_{eτ}$ and $η_{μτ}$). Our study shows that the upper bounds on the parameters $η_{μμ}$, $η_{ττ}$ and $η_{μτ}$ depend upon how $Δm^2_{31}$ is minimized in the theory. However, this is not the case when one tries to measure the impact of SNSI on $δ_{\rm CP}$. Further, we show that the CP sensitivity of ESSnuSB can be completely lost for certain values of $η_{ee}$ and $η_{μτ}$ for which the appearance channel probability becomes independent of $δ_{\rm CP}$.
△ Less
Submitted 26 April, 2024; v1 submitted 16 October, 2023;
originally announced October 2023.
-
Completion of Testing Series Double-spoke Cavity Cryomodules for ESS
Authors:
R. Santiago Kern,
C. Svanberg,
K. Fransson,
K. Gajewski,
L. Hermansson,
H. Li,
T. Lofnes,
M. Olvegård,
I. Profatilova,
M. Zhovner,
A. Miyazaki,
R. Ruber
Abstract:
The FREIA Laboratory at Uppsala University, Sweden, has completed the evaluation of 13 double-spoke cavity cryomodules for ESS. This is the first time double-spoke cavities will be deployed in a real machine. This paper summarizes testing procedures and statistics of the results and lessons learned.
The FREIA Laboratory at Uppsala University, Sweden, has completed the evaluation of 13 double-spoke cavity cryomodules for ESS. This is the first time double-spoke cavities will be deployed in a real machine. This paper summarizes testing procedures and statistics of the results and lessons learned.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
The ESSnuSB design study: overview and future prospects
Authors:
ESSnuSB Collaboration,
A. Alekou,
E. Baussan,
A. K. Bhattacharyya,
N. Blaskovic Kraljevic,
M. Blennow,
M. Bogomilov,
B. Bolling,
E. Bouquerel,
F. Bramati,
A. Branca,
O. Buchan,
A. Burgman,
C. J. Carlile,
J. Cederkall,
S. Choubey,
P. Christiansen,
M. Collins,
E. Cristaldo Morales,
L. D'Alessi,
H. Danared,
D. Dancila,
J. P. A. M. de André,
J. P. Delahaye,
M. Dracos
, et al. (61 additional authors not shown)
Abstract:
ESSnuSB is a design study for an experiment to measure the CP violation in the leptonic sector at the second neutrino oscillation maximum using a neutrino beam driven by the uniquely powerful ESS linear accelerator. The reduced impact of systematic errors on sensitivity at the second maximum allows for a very precise measurement of the CP violating parameter. This review describes the fundamental…
▽ More
ESSnuSB is a design study for an experiment to measure the CP violation in the leptonic sector at the second neutrino oscillation maximum using a neutrino beam driven by the uniquely powerful ESS linear accelerator. The reduced impact of systematic errors on sensitivity at the second maximum allows for a very precise measurement of the CP violating parameter. This review describes the fundamental advantages of measurement at the 2nd maximum, the necessary upgrades to the ESS linac in order to produce a neutrino beam, the near and far detector complexes, the expected physics reach of the proposed ESSnuSB experiment, concluding with the near future developments aimed at the project realization.
△ Less
Submitted 8 August, 2023; v1 submitted 30 March, 2023;
originally announced March 2023.
-
Particle Physics at the European Spallation Source
Authors:
H. Abele,
A. Alekou,
A. Algora,
K. Andersen,
S. Baessler,
L. Barron-Palos,
J. Barrow,
E. Baussan,
P. Bentley,
Z. Berezhiani,
Y. Bessler,
A. K. Bhattacharyya,
A. Bianchi,
J. Bijnens,
C. Blanco,
N. Blaskovic Kraljevic,
M. Blennow,
K. Bodek,
M. Bogomilov,
C. Bohm,
B. Bolling,
E. Bouquerel,
G. Brooijmans,
L. J. Broussard,
O. Buchan
, et al. (154 additional authors not shown)
Abstract:
Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons…
▽ More
Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches).
△ Less
Submitted 30 January, 2024; v1 submitted 18 November, 2022;
originally announced November 2022.
-
The European Spallation Source neutrino Super Beam Conceptual Design Report
Authors:
A. Alekou,
E. Baussan,
A. K. Bhattacharyya,
N. Blaskovic Kraljevic,
M. Blennow,
M. Bogomilov,
B. Bolling,
E. Bouquerel,
O. Buchan,
A. Burgman,
C. J. Carlile,
J. Cederkall,
P. Christiansen,
M. Collins,
E. Cristaldo Morales,
P. Cupiał,
L. D'Alessi,
H. Danared,
D. Dancila,
J. P. A. M. de André,
J. P. Delahaye,
M. Dracos,
I. Efthymiopoulos,
T. Ekelöf,
M. Eshraqi
, et al. (51 additional authors not shown)
Abstract:
This conceptual design report provides a detailed account of the European Spallation Source neutrino Super Beam (ESS$ν$SB) feasibility study. This facility has been proposed after the measurements reported in 2012 of a relatively large value of the neutrino mixing angle $θ_{13}$, which raised the possibility of observing potential CP violation in the leptonic sector with conventional neutrino beam…
▽ More
This conceptual design report provides a detailed account of the European Spallation Source neutrino Super Beam (ESS$ν$SB) feasibility study. This facility has been proposed after the measurements reported in 2012 of a relatively large value of the neutrino mixing angle $θ_{13}$, which raised the possibility of observing potential CP violation in the leptonic sector with conventional neutrino beams. The measured value of $θ_{13}$ also privileges the $2^{nd}$ oscillation maximum for the discovery of CP violation instead of the more typically studied $1^{st}$ maximum. The sensitivity at this $2^{nd}$ oscillation maximum is about three times higher than at the $1^{st}$ one, which implies a reduced influence of systematic errors. Working at the $2^{nd}$ oscillation maximum requires a very intense neutrino beam with an appropriate energy. The world's most intense pulsed spallation neutron source, the European Spallation Source (ESS), will have a proton linac operating at 5\,MW power, 2\,GeV kinetic energy and 14~Hz repetition rate (3~ms pulse duration, 4\% duty cycle) for neutron production. In this design study it is proposed to double the repetition rate and compress the beam pulses to the level of microseconds in order to provide an additional 5~MW proton beam for neutrino production. The physics performance has been evaluated for such a neutrino super beam, in conjunction with a megaton-scale underground water Cherenkov neutrino detector installed at a distance of 360--550\,km from ESS. The ESS proton linac upgrades, the accumulator ring required for proton-pulse compression, the target station design and optimisation, the near and far detector complexes, and the physics potential of the facility are all described in this report. The ESS linac will be operational by 2025, at which point the implementation of upgrades for the neutrino facility could begin.
△ Less
Submitted 2 June, 2022;
originally announced June 2022.
-
The European Spallation Source neutrino Super Beam
Authors:
A. Alekou,
E. Baussan,
N. Blaskovic Kraljevic,
M. Blennow,
M. Bogomilov,
E. Bouquerel,
A. Burgman,
C. J. Carlile,
J. Cederkall,
P. Christiansen,
M. Collins,
E. Cristaldo Morales,
P. Cupial,
L. D Alessi,
H. Danared,
J. P. A. M. de Andre,
J. P. Delahaye,
M. Dracos,
I. Efthymiopoulos,
T. Ekelof,
M. Eshraqi,
G. Fanourakis,
E. Fernandez-Martinez,
B. Folsom,
N. Gazis
, et al. (37 additional authors not shown)
Abstract:
In this Snowmass 2021 white paper, we summarise the Conceptual Design of the European Spallation Source neutrino Super Beam (ESSvSB) experiment and its synergies with the possible future muon based facilities, e.g. a Low Energy nuSTORM and the Muon Collider. The ESSvSB will benefit from the high power, 5 MW, of the European Spallation Source (ESS) LINAC in Lund-Sweden to produce the world most int…
▽ More
In this Snowmass 2021 white paper, we summarise the Conceptual Design of the European Spallation Source neutrino Super Beam (ESSvSB) experiment and its synergies with the possible future muon based facilities, e.g. a Low Energy nuSTORM and the Muon Collider. The ESSvSB will benefit from the high power, 5 MW, of the European Spallation Source (ESS) LINAC in Lund-Sweden to produce the world most intense neutrino beam, enabling measurements to be made at the second oscillation maximum. Assuming a ten-year exposure, physics simulations show that the CP-invariance violation can be established with a significance of 5 sigma over more than 70% of all values of delta CP and with an error in the measurement of the delta CP angle of less than 8 degree for all values of delta CP.
However, several technological and physics challenges must be further studied before achieving a final Technical Design. Measuring at the 2nd oscillation maximum necessitates a very intense neutrino beam with the appropriate energy. For this, the ESS proton beam LINAC, which is designed to produce the world's most intense neutron beam, will need to be upgraded to 10 MW power, 2.5 GeV energy and 28 Hz beam pulse repetition rate. An accumulator ring will be required for the compression of the ESS LINAC beam pulse from 2.86 ms to 1.3 mus. A high power target station facility will be needed to produce a well-focused intense (super) mu-neutrino beam. The physics performance of that neutrino Super Beam in conjunction with a megaton underground Water Cherenkov neutrino far detector installed at a distance of either 360 km or 540 km from the ESS, the baseline, has been evaluated.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Design of a Canted-cosine-theta orbit corrector for the High Luminosity LHC
Authors:
K. Pepitone,
G. Kirby,
R. Ruber,
A. Ahl,
M. Canale,
I. Dugic,
L. Gentini,
M. Johansson,
G. Karlsson,
J. Kovacikova,
J. Lindström,
A. Olsson,
M. Olvegård
Abstract:
The High Luminosity LHC requires dipole orbit correctors grouped in double aperture magnet assemblies. They provide a field of 3.1 T at 100 A in an aperture of 70 mm. The current standard design is a classical cosine-theta layout made with ribbon cable. However, the electric insulation of the ribbon cable is not radiation-resistant enough to withstand the radiation load expected in the coming year…
▽ More
The High Luminosity LHC requires dipole orbit correctors grouped in double aperture magnet assemblies. They provide a field of 3.1 T at 100 A in an aperture of 70 mm. The current standard design is a classical cosine-theta layout made with ribbon cable. However, the electric insulation of the ribbon cable is not radiation-resistant enough to withstand the radiation load expected in the coming years of LHC operation. A new design, based on a radiation-resistant cable with polyimide insulator, that can replace the existing orbit correctors at their end-of-life, is needed. The challenge is to design a magnet that fits directly into the existing positions and that can operate with the same busbars, passive quench protection, and power supplies as existing magnets. We propose a self-protected canted-cosine-theta (CCT) design. We take the opportunity to explore new concepts for the CCT design to produce a cost-effective and high-quality design with a more sustainable use of resources. The new orbit corrector design meets high requirements on the field quality while keeping within the same mechanical volume and maximum excitation current.
A collaboration of Swedish universities and Swedish industry has been formed for the development and production of a prototype magnet following a concurrent engineering (CE) methodology to reduce the time needed to produce a functional CCT magnet. The magnet has a 1 m long CCT dipole layout consisting of two coils. The superconductor is a commercially available 0.33 mm wire with polyimide insulation in a 6-around-1 cable. The channels in the coil formers, that determine the CCT layout, allow for 2 x 5 cable layers. A total of 70 windings makes that the coil current can be kept below 100 A. We will present the detailed design and preliminary quench simulations.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Updated physics performance of the ESSnuSB experiment
Authors:
A. Alekou,
E. Baussan,
N. Blaskovic Kraljevic,
M. Blennow,
M. Bogomilov,
E. Bouquerel,
A. Burgman,
C. J. Carlile,
J. Cederkall,
P. Christiansen,
M. Collins,
E. Cristaldo Morales,
L. D'Alessi,
H. Danared,
J. P. A. M. de André,
J. P. Delahaye,
M. Dracos,
I. Efthymiopoulos,
T. Ekelöf,
M. Eshraqi,
G. Fanourakis,
E. Fernandez-Martinez,
B. Folsom,
M. Ghosh,
G. Gokbulut
, et al. (26 additional authors not shown)
Abstract:
In this paper, we present the physics performance of the ESSnuSB experiment in the standard three flavor scenario using the updated neutrino flux calculated specifically for the ESSnuSB configuration and updated migration matrices for the far detector. Taking conservative systematic uncertainties corresponding to a normalization error of $5\%$ for signal and $10\%$ for background, we find that the…
▽ More
In this paper, we present the physics performance of the ESSnuSB experiment in the standard three flavor scenario using the updated neutrino flux calculated specifically for the ESSnuSB configuration and updated migration matrices for the far detector. Taking conservative systematic uncertainties corresponding to a normalization error of $5\%$ for signal and $10\%$ for background, we find that there is $10σ$ $(13σ)$ CP violation discovery sensitivity for the baseline option of 540 km (360 km) at $δ_{\rm CP} = \pm 90^\circ$. The corresponding fraction of $δ_{\rm CP}$ for which CP violation can be discovered at more than $5 σ$ is $70\%$. Regarding CP precision measurements, the $1σ$ error associated with $δ_{\rm CP} = 0^\circ$ is around $5^\circ$ and with $δ_{\rm CP} = -90^\circ$ is around $14^\circ$ $(7^\circ)$ for the baseline option of 540 km (360 km). For hierarchy sensitivity, one can have $3σ$ sensitivity for 540 km baseline except $δ_{\rm CP} = \pm 90^\circ$ and $5σ$ sensitivity for 360 km baseline for all values of $δ_{\rm CP}$. The octant of $θ_{23}$ can be determined at $3 σ$ for the values of: $θ_{23} > 51^\circ$ ($θ_{23} < 42^\circ$ and $θ_{23} > 49^\circ$) for baseline of 540 km (360 km). Regarding measurement precision of the atmospheric mixing parameters, the allowed values at $3 σ$ are: $40^\circ < θ_{23} < 52^\circ$ ($42^\circ < θ_{23} < 51.5^\circ$) and $2.485 \times 10^{-3}$ eV$^2 < Δm^2_{31} < 2.545 \times 10^{-3}$ eV$^2$ ($2.49 \times 10^{-3}$ eV$^2 < Δm^2_{31} < 2.54 \times 10^{-3}$ eV$^2$) for the baseline of 540 km (360 km).
△ Less
Submitted 24 December, 2021; v1 submitted 25 June, 2021;
originally announced July 2021.
-
Accelerator Development at the FREIA Laboratory
Authors:
R. Ruber,
A. K. Bhattacharyya,
D. Dancila,
T. Ekelöf,
J. Eriksson,
K. Fransson,
K. Gajewski,
V. Goryashko,
L. Hermansson,
M. Jacewicz,
M. Jobs,
Å. Jönsson,
H. Li,
T. Lofnes,
A. Miyazaki,
M. Olvegård,
E. Pehlivan,
T. Peterson,
K. Pepitone,
A. Rydberg,
R. Santiago Kern,
R. Wedberg,
A. Wiren,
R. Yogi,
V. Ziemann
Abstract:
The FREIA Laboratory at Uppsala University focuses on superconducting technology and accelerator development. It actively supports the development of the European Spallation Source, CERN, and MAX IV, among others. FREIA has developed test facilities for superconducting accelerator technology such as a double-cavity horizontal test cryostat, a vertical cryostat with a novel magnetic field compensat…
▽ More
The FREIA Laboratory at Uppsala University focuses on superconducting technology and accelerator development. It actively supports the development of the European Spallation Source, CERN, and MAX IV, among others. FREIA has developed test facilities for superconducting accelerator technology such as a double-cavity horizontal test cryostat, a vertical cryostat with a novel magnetic field compensation scheme, and a test stand for short cryomodules. Accelerating cavities have been tested in the horizontal cryostat, crab-cavities in the vertical cryostat, and cryomodules for ESS on the cryomodule test stand. High power radio-frequency amplifier prototypes based on vacuum tube technology were developed for driving spoke cavities. Solid-state amplifiers and power combiners are under development for future projects. We present the status of the FREIA Laboratory complemented with results of recent projects and future prospects.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
The opportunity offered by the ESSnuSB project to exploit the larger leptonic CP violation signal at the second oscillation maximum and the requirements of this project on the ESS accelerator complex
Authors:
Elena Wildner,
Michel Martini,
Horst Schonauer,
Alexander Burgman,
Joakim Cederkall,
Peter Christiansen,
Tord Ekelof,
Maja Olvegard
Abstract:
Very intense neutrino beams and large neutrino detectors will be needed to enable the discovery of CP violation in the leptonic sector. The European Spallation Source (ESS), currently under construction in Lund, Sweden, is a research center that will provide, by 2023, the world's most powerful neutron source. The average power will be 5 MW. Pulsing this linac at higher frequency, at the same insta…
▽ More
Very intense neutrino beams and large neutrino detectors will be needed to enable the discovery of CP violation in the leptonic sector. The European Spallation Source (ESS), currently under construction in Lund, Sweden, is a research center that will provide, by 2023, the world's most powerful neutron source. The average power will be 5 MW. Pulsing this linac at higher frequency, at the same instantaneous power, will make it possible to raise the average beam power to 10 MW to produce, in parallel with the spallation neutron production, a high performance neutrino Super Beam of about 0.4 GeV mean neutrino energy. The ESS neutrino Super Beam, ESSnuSB, operated with a 2.0 GeV linac proton beam, together with a large underground Water Cherenkov detector located at 540 km from Lund, close to the second oscillation maximum, will make it possible to discover leptonic CP violation at 5 sigma significance level in 56 percent (65 percent for an upgrade to 2.5 GeV beam energy) of the leptonic Dirac CP-violating phase range after 10 years of data taking. The paper gives an overview of the proposed facility and presents the outstanding physics reach possible for CP violation with ESSnuSB.
△ Less
Submitted 11 October, 2016; v1 submitted 2 October, 2015;
originally announced October 2015.