-
Resetting photons
Authors:
Guilherme Eduardo Freire Oliveira,
Christian Maes,
Kasper Meerts
Abstract:
Starting from a frequency diffusion process for a tagged photon which simulates relaxation to the Planck law, we introduce a resetting where photons lower their frequency at random times. We consider two versions, one where the resetting to low frequency is independent of the existing frequency and a second case where the reduction in frequency scales with the original frequency. The result is a n…
▽ More
Starting from a frequency diffusion process for a tagged photon which simulates relaxation to the Planck law, we introduce a resetting where photons lower their frequency at random times. We consider two versions, one where the resetting to low frequency is independent of the existing frequency and a second case where the reduction in frequency scales with the original frequency. The result is a nonlinear Markov process where the stationary distribution modifies the Planck law by abundance of low-frequency occupation. The physical relevance of such photon resetting processes can be found in explorations of nonequilibrium effects, e.g., via random expansions of a confined plasma or photon gas or via strongly inelastic scattering with matter.
△ Less
Submitted 12 October, 2022; v1 submitted 22 March, 2022;
originally announced March 2022.
-
Photon frequency diffusion process
Authors:
Guilherme Eduardo Freire Oliveira,
Christian Maes,
Kasper Meerts
Abstract:
We introduce a stochastic multi-photon dynamics on reciprocal space. Assuming isotropy, we derive the diffusion limit for a tagged photon to be a nonlinear Markov process on frequency. The nonlinearity stems from the stimulated emission. In the case of Compton scattering with thermal electrons, the limiting process describes the dynamical fluctuations around the Kompaneets equation. More generally…
▽ More
We introduce a stochastic multi-photon dynamics on reciprocal space. Assuming isotropy, we derive the diffusion limit for a tagged photon to be a nonlinear Markov process on frequency. The nonlinearity stems from the stimulated emission. In the case of Compton scattering with thermal electrons, the limiting process describes the dynamical fluctuations around the Kompaneets equation. More generally, we construct a photon frequency diffusion process which enables to include nonequilibrium effects. Modifications of the Planck Law may thus be explored, where we focus on the low-frequency regime.
△ Less
Submitted 17 August, 2022; v1 submitted 17 February, 2022;
originally announced February 2022.
-
Schwarzite and schwarzynes based load-bear resistant radial cellular griding-based 3D printed structures
Authors:
Eliezer F. Oliveira,
Rushikesh S. Ambekar,
Douglas S. Galvao,
Chandra S. Tiwary
Abstract:
Nature-occurring structures exhibiting unique topological features such as complex and gradient porosity has been the basis to create new materials and/or structures. Most studies have been focused on complex periodic porous structures but gradient porous ones have not been yet fully investigated for stable structural designs. In this work, we have proposed and tested a new approach to create cell…
▽ More
Nature-occurring structures exhibiting unique topological features such as complex and gradient porosity has been the basis to create new materials and/or structures. Most studies have been focused on complex periodic porous structures but gradient porous ones have not been yet fully investigated for stable structural designs. In this work, we have proposed and tested a new approach to create cellular griding structures, in which the mass density varies from the center to the borders, i.e, a radial gradient. To create these new structures we exploited the topology of two carbon-based families with different pore sizes, the schwarzites, and schwarzynes. We created fully atomistic models that were translated into macroscale ones that were then 3D printed. The mechanical behavior of the gradient structures was investigated by molecular dynamics simulations and mechanical compression tests of the printed models. Our results show that their mechanical response can be engineered (for instance, in terms of energy absorption, ballistic performance, etc.) and can outperform their corresponding density uniform structures.
△ Less
Submitted 12 November, 2021;
originally announced November 2021.
-
Scalable synthesis of 2D van der Waals superlattices
Authors:
Michael J. Motala,
Xiang Zhang,
Pawan Kumar,
Eliezer F. Oliveira,
Anna Benton,
Paige Miesle,
Rahul Rao,
Peter R. Stevenson,
David Moore,
Adam Alfieri,
Jason Lynch,
Guanhui Gao,
Sijie Ma,
Hanyu Zhu,
Zhe Wang,
Ivan Petrov,
Eric A. Stach,
W. Joshua Kennedy,
Shiva Vengala,
James M. Tour,
Douglas S. Galvao,
Deep Jariwala,
Christopher Muratore,
Michael Snure,
Pulickel M. Ajayan
, et al. (1 additional authors not shown)
Abstract:
Heterostructure materials form the basis of much of modern electronics, from transistors to lasers and light-emitting diodes. Recent years have seen a renewed focus on creating heterostructures through the vertical integration of two-dimensional materials, including graphene, hexagonal boron nitride, and transition metal dichalcogenides (TMDCs). However, fundamental challenges associated with mate…
▽ More
Heterostructure materials form the basis of much of modern electronics, from transistors to lasers and light-emitting diodes. Recent years have seen a renewed focus on creating heterostructures through the vertical integration of two-dimensional materials, including graphene, hexagonal boron nitride, and transition metal dichalcogenides (TMDCs). However, fundamental challenges associated with materials processing have limited material quality and impeded scalability. We demonstrate a method to convert sub-nanometer metal films deposited on silicon and sapphire into TMDC heterostructures through vapor-phase processing. The resulting heterostructures and superlattices exhibit novel properties compared with stand-alone TMDCs, including reduced bandgap, enhanced light-matter coupling, and improved catalytic performance. This robust and scalable synthetic method provides new opportunities to generate a wide range of artificially stacked 2D superlattices with controlled morphology and composition.
△ Less
Submitted 4 November, 2021;
originally announced November 2021.
-
Statistical Mechanics of the Kompaneets Equation
Authors:
Guilherme Eduardo Freire Oliveira
Abstract:
As an important subject in non-equilibrium Statistical Mechanics, we study in this thesis the relaxation to equilibrium of a photon gas in contact with an non-relativistic and non-degenerate electron bath. Photons and electrons interact via the Compton effect, establishing thermal equilibrium of radiation with matter as pointed out by A.S. Kompaneets in 1957. The evolution of the photon distributi…
▽ More
As an important subject in non-equilibrium Statistical Mechanics, we study in this thesis the relaxation to equilibrium of a photon gas in contact with an non-relativistic and non-degenerate electron bath. Photons and electrons interact via the Compton effect, establishing thermal equilibrium of radiation with matter as pointed out by A.S. Kompaneets in 1957. The evolution of the photon distribution function is then described by the eponymous partial differential equation, here viewed as the diffusion approximation to the relativistic Boltzmann equation that describes the system. Being one of the few examples where this diffusion approximation can be performed in great detail, yielding the Bose-Einstein distribution as stationary solution, the Kompaneets equation also provides the description of the so-called Sunyaev-Zeldovich effect, which is the change of apparent brightness of the cosmic microwave background (CMB) radiation. There are many ways of deriving this equation, but one of them, which was proposed by Kompaneets in 1957 stands out for its directness and simplicity. However, we point out in this work that there are some inconsistencies regarding this traditional derivation that were repeated by all the references we could find that follow the original framework of 1957. This thesis is divided in two parts: in the first we will be interested in how to deal with these inconsistencies, building the necessary basis in which the diffusion approximation to the Boltzmann equation is consistently performed. In the second part, we will be interested in possible extensions and beyond reviewing some existing extensions, we will also show that a new setup involving a master equation of a random walk with suitable chosen transition rates in the photon reciprocal space furnishes not only Kompaneets equation but also a first generalization to a system of bosons under a possible driving.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
A Reactive Molecular Dynamics Study of Hydrogenation on Diamond Surfaces
Authors:
Eliezer F. Oliveira,
Mahesh R. Neupane,
Chenxi Li,
Harikishan Kannan,
Xiang Zhang,
Anand B. Puthirath,
Pankaj B. Shah,
A. Glen Birdwell,
Tony G. Ivanov,
Robert Vajtai,
Douglas S. Galvao,
Pulickel M. Ajayan
Abstract:
Hydrogenated diamond has been regarded as a promising material in electronic device applications, especially in field-effect transistors (FETs). However, the quality of diamond hydrogenation has not yet been established, nor has the specific orientation that would provide the optimum hydrogen coverage. In addition, most theoretical work in the literature use models with 100% hydrogenated diamond s…
▽ More
Hydrogenated diamond has been regarded as a promising material in electronic device applications, especially in field-effect transistors (FETs). However, the quality of diamond hydrogenation has not yet been established, nor has the specific orientation that would provide the optimum hydrogen coverage. In addition, most theoretical work in the literature use models with 100% hydrogenated diamond surfaces to study electronic properties, which is far from the experimentally observed hydrogen coverage. In this work, we have carried out a detailed study using fully atomistic reactive molecular dynamics (MD) simulations on low indices diamond surfaces i.e. (001), (013), (110), (113) and (111) to evaluate the quality and hydrogenation thresholds on different diamond surfaces and their possible effects on electronic properties. Our simulation results indicate that the 100% surface hydrogenation in these surfaces is hard to achieve because of the steric repulsion between the terminated hydrogen atoms. Among all the considered surfaces, the (001), (110), and (113) surfaces incorporate a larger number of hydrogen atoms and passivate the surface dangling bonds. Our results on hydrogen stability also suggest that these surfaces with optimum hydrogen coverage are robust under extreme conditions and could provide homogeneous p-type surface conductivity in the diamond surfaces, a key requirement for high-field, high-frequency device applications.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
On the derivation of the Kompaneets equation
Authors:
Guilherme Eduardo Freire Oliveira,
Christian Maes,
Kasper Meerts
Abstract:
The relaxation of a photon bath to thermal equilibrium via Compton scattering with electrons is described in the Kompaneets equation (1956). The equation is mostly known from studies of astrophysical plasmas, for its convergence to the Planck distribution and for possible corrections to that Planck law in the cosmic microwave background, most notably from the Sunyaev-Zeldovich effect. We revisit i…
▽ More
The relaxation of a photon bath to thermal equilibrium via Compton scattering with electrons is described in the Kompaneets equation (1956). The equation is mostly known from studies of astrophysical plasmas, for its convergence to the Planck distribution and for possible corrections to that Planck law in the cosmic microwave background, most notably from the Sunyaev-Zeldovich effect. We revisit its derivation emphasizing its structure as a Kramers-Moyal diffusion approximation to the quantum Boltzmann equation or Master equation with stimulated emission. We do not assume that the Planck law is stationary in performing the continuum approximation but we emphasize the necessity of the flux or Møller factor to arrive at a continuity equation. On the other hand, the structure allows more general assumptions than originally envisioned by Kompaneets.
△ Less
Submitted 17 August, 2022; v1 submitted 11 March, 2021;
originally announced March 2021.
-
Apparent Ferromagnetism in Exfoliated Ultra-thin Pyrite Sheets
Authors:
Anand B. Puthirath,
Aravind Puthirath Balan,
Eliezer F. Oliveira,
Vishnu Sreepal,
Francisco C. Robles Hernandez,
Guanhui Gao,
Nithya Chakingal,
Lucas M. Sassi,
Prasankumar Thibeorchews,
Gelu Costin,
Robert Vajtai,
Douglas S. Galvao,
Rahul R. Nair,
Pulickel M. Ajayan
Abstract:
Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (…
▽ More
Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (FeS2) by means of liquid-phase exfoliation. Structural characterizations imply that (111) oriented sheets are predominant and is supported theoretically by means of density functional theory surface energy calculations. Spin-polarized density theory calculations further predicted that (111) oriented three-atom thick pyrite sheet has a stable ferromagnetic ground state different from its diamagnetic bulk counterpart. This theoretical finding is evaluated experimentally employing low temperature superconducting quantum interference device measurements and observed an anomalous ferromagnetic kind of behavior.
△ Less
Submitted 28 August, 2021; v1 submitted 6 October, 2020;
originally announced October 2020.
-
On the sulfur doping of gamma-graphdiyne: A Molecular Dynamics and DFT study
Authors:
Eliezer Fernando Oliveira,
Augusto Batagin-Neto,
Douglas Soares Galvao
Abstract:
Recently, an experimental study developed an efficient way to obtain sulfur-doped gamma-graphdiyne. This study has shown that this new material could have promising applications in lithium-ion batteries, but the complete understanding of how the sulfur atoms are incorporated into the graphdiyne network is still missing. In this work, we have investigated the sulfur doping process through molecular…
▽ More
Recently, an experimental study developed an efficient way to obtain sulfur-doped gamma-graphdiyne. This study has shown that this new material could have promising applications in lithium-ion batteries, but the complete understanding of how the sulfur atoms are incorporated into the graphdiyne network is still missing. In this work, we have investigated the sulfur doping process through molecular dynamics and density functional theory simulations. Our results suggest that the doped induced distortions of the gamma-graphdiyne pores prevent the incorporation of more than two sulfur atoms. The most common configuration is the incorporation of just one sulfur atom per the graphdiyne pore.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Zeolite-inspired 3d printed structures with enhanced mechanical properties
Authors:
Rushikesh S. Ambekar,
Eliezer F. Oliveira,
Brijesh Kushwaha,
Leonardo D. Machado,
Mohammad Sajadi,
Ray H. Baughman,
Pulickel M. Ajayan,
Ajit K. Roy,
Douglas S. Galvao,
Chandra S. Tiwary
Abstract:
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, r…
▽ More
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, researchers are interested in enhancing strength of materials by playing with topology/geometry and therefore nature is best option to mimic for structures whereas, complexity limits nature mimicked structures. In this paper, we have explored Zeolite-inspired structures for load bearing capacity. Zeolite-inspired structure were obtained from molecular dynamics simulation and then fabricated via Fused deposition Modeling. The atomic scale complex topology from simulation is experimentally synthesized using 3D printing. Compressibility of as-fabricated structures was tested in different direction and compared with simulation results. Such complex architecture can be used for ultralight aerospace and automotive parts.
△ Less
Submitted 12 February, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Three-dimensional carbon nanotube networks from beta zeolite templates: Thermal stability and mechanical properties
Authors:
Eliezer F. Oliveira,
Leonardo D. Machado,
Ray H. Baughman,
Douglas S. Galvao
Abstract:
We here investigated the thermal and mechanical behaviors of three-dimensional beta zeolite-templated carbon nanotube networks (BZCN). These networks are topologically generated by inserting carbon nanotubes (CNTs) into zeolite channels and connecting them using X-type junctions. We considered two cases, one with the tubes filling all zeolite channels (HD-BZCN) and the other with just partial fill…
▽ More
We here investigated the thermal and mechanical behaviors of three-dimensional beta zeolite-templated carbon nanotube networks (BZCN). These networks are topologically generated by inserting carbon nanotubes (CNTs) into zeolite channels and connecting them using X-type junctions. We considered two cases, one with the tubes filling all zeolite channels (HD-BZCN) and the other with just partial filling (LD-BZCN). Fully atomistic reactive molecular dynamics (MD) simulations show that the networks exhibit high thermal stability (up to 1000 K). When compressed, the structures can withstand very large strains without fracturing (>50% for HD-BZCN and >70% for LD-BZCN). LD-BZCN can be stretched over 100% without fracturing.
△ Less
Submitted 21 December, 2019;
originally announced December 2019.
-
Mechanical Properties of Protomene: A Molecular Dynamics Investigation
Authors:
Eliezer F. Oliveira,
Pedro A. S. Autreto,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
Recently, a new class of carbon allotrope called protomene was proposed. This new structure is composed of sp2 and sp3 carbon-bonds. Topologically, protomene can be considered as an sp3 carbon structure (~80% of this bond type) doped by sp2 carbons. First-principles simulations have shown that protomene presents an electronic bandgap of ~3.4 eV. However, up to now, its mechanical properties have n…
▽ More
Recently, a new class of carbon allotrope called protomene was proposed. This new structure is composed of sp2 and sp3 carbon-bonds. Topologically, protomene can be considered as an sp3 carbon structure (~80% of this bond type) doped by sp2 carbons. First-principles simulations have shown that protomene presents an electronic bandgap of ~3.4 eV. However, up to now, its mechanical properties have not been investigated. In this work, we have investigated protomene mechanical behavior under tensile strain through fully atomistic reactive molecular dynamics simulations using the ReaxFF force field, as available in the LAMMPS code. At room temperature, our results show that the protomene is very stable and the obtained ultimate strength and ultimate stress indicates an anisotropic behavior. The highest ultimate strength was obtained for the x-direction, with a value of ~110 GPa. As for the ultimate strain, the highest one was for the z-direction (~25% of strain) before protomene mechanical fracture.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
On the mechanical properties of novamene: a fully atomistic molecular dynamics and DFT investigation
Authors:
Eliezer F. Oliveira,
Pedro A. S. Autreto,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
We have investigated through fully atomistic reactive molecular dynamics and DFT simulations, the mechanical properties and fracture dynamics of novamene, a new 3D carbon allotrope structure recently proposed. Our results showed that novamene is an anisotropic structure with relation to tensile deformation. Although novamente shares some mechanical features with other carbon allotropes, it also ex…
▽ More
We have investigated through fully atomistic reactive molecular dynamics and DFT simulations, the mechanical properties and fracture dynamics of novamene, a new 3D carbon allotrope structure recently proposed. Our results showed that novamene is an anisotropic structure with relation to tensile deformation. Although novamente shares some mechanical features with other carbon allotropes, it also exhibits distinct ones, such as, extensive structural reconstructions (self-healing effect). Novamene presents ultimate strength (~ 100 GPa) values lower than other carbon allotropes, but it has the highest ultimate strain along the z-direction (~ 22.5%). Although the Young's modulus (~ 600 GPa) and ultimate strength values are smaller than for other carbon allotropes, they still outperform other materials, such as for example silicon, steel or titanium alloys. With relation to the fracture dynamics, novamene is again anisotropic with the fracture/crack propagation originating from deformed heptagons and pentagons for x and y directions and broken sp3 bonds connecting structural planes. Another interesting feature is the formation of multiple and long carbon linear chains in the final fracture stages.
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
Improving Graphene-metal Contacts: Thermal Induced Polishing
Authors:
Eliezer Fernando Oliveira,
Ricardo Paupitz Santos,
Pedro Alves da Silva Autreto,
Stanislav Moshkalev,
Douglas Soares Galvao
Abstract:
Graphene is a very promising material for nanoelectronics applications due to its unique and remarkable electronic and thermal properties. However, when deposited on metallic electrodes the overall thermal conductivity is significantly decreased. This phenomenon has been attributed to the mismatch between the interfaces and contact thermal resistance. Experimentally, one way to improve the graphen…
▽ More
Graphene is a very promising material for nanoelectronics applications due to its unique and remarkable electronic and thermal properties. However, when deposited on metallic electrodes the overall thermal conductivity is significantly decreased. This phenomenon has been attributed to the mismatch between the interfaces and contact thermal resistance. Experimentally, one way to improve the graphene/metal contact is thorough high-temperature annealing, but the detailed mechanisms behind these processes remain unclear. In order to address these questions, we carried out fully atomistic reactive molecular dynamics simulations using the ReaxFF force field to investigate the interactions between multi-layer graphene and metallic electrodes (nickel) under (thermal) annealing. Our results show that the annealing induces an upward-downward movement of the graphene layers, causing a pile-driver-like effect over the metallic surface. This graphene induced movements cause a planarization (thermal polishing-like effect) of the metallic surface, which results in the increase of the effective graphene/metal contact area. This can also explain the experimentally observed improvements of the thermal and electric conductivities.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Silver Hardening via Hypersonic Impacts
Authors:
Eliezer Fernando Oliveira,
Pedro Alves da Silva Autreto,
Douglas Soares Galvao
Abstract:
The search for new ultra strong materials has been a very active research area. With relation to metals, a successful way to improve their strength is by the creation of a gradient of nanograins (GNG) inside the material. Recently, R. Thevamaran et al. [Science v354, 312-316 (2016)] propose a single step method based on high velocity impact of silver nanocubes to produce high-quality GNG. This met…
▽ More
The search for new ultra strong materials has been a very active research area. With relation to metals, a successful way to improve their strength is by the creation of a gradient of nanograins (GNG) inside the material. Recently, R. Thevamaran et al. [Science v354, 312-316 (2016)] propose a single step method based on high velocity impact of silver nanocubes to produce high-quality GNG. This method consists of producing high impact collisions of silver cubes at hypersonic velocity (~400 m/s) against a rigid wall. Although they observed an improvement in the mechanical properties of the silver after the impact, the GNG creation and the strengthening mechanism at nanoscale remain unclear. In order to gain further insights about these mechanisms, we carried out fully atomistic molecular dynamics simulations (MD) to investigate the atomic conformations/rearrangements during and after high impact collisions of silver nanocubes at ultrasonic velocity. Our results indicate the co-existence of polycrystalline arrangements after the impact formed by core HCP domains surrounded by FCC ones, which could also contribute to explain the structural hardening.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.